Advanced Materials and Engineering Materials IX Selected, peer-reviewed papers from the 9th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2020), July 3-5, 2020, Bangkok, Thailand
Saved in:
| Meeting name: | International Conference on Advanced Materials and Engineering Materials (9th : 2020 : Bangkok, Thailand) |
|---|---|
| Imprint: | Switzerland : Trans Tech Publications Ltd, 2020. |
| Description: | 1 online resource. |
| Language: | English |
| Series: | Key Engineering Materials. ; v.Volume 861 Key engineering materials ; v. 861. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/12873119 |
Table of Contents:
- Study of the Manufacturability of Production and Properties of Welding Wire from Alloy 1580
- Microstructure and Mechanical Properties of Laser Butt Welded Laser Powder Bed Fusion Manufactured and Sheet Metal 316L Parts
- Microstructural Evolution of Laser-Welded Dissimilar Lap Joints of Martensitic Abrasion Resistant Steel and Cold-Worked Austenitic Stainless Steel
- Underwater Laser Turning of Commercially-Pure Titanium
- Microstructure Evolution of As-Cast Nickel Aluminum Bronze under Electropulsing
- Research on Microstructure and Wear Property of 45 Steel Quenched with Different Laser Power
- Research on New Technology of Metal Powder-Plate Composite Rolling
- Vacancy Formation Energy of Metals
- TIG Overlap Welding Affecting Hard-Faced Weld Metal Properties on JIS-S50C Carbon Steel
- Effect of Secondary Aging Process on the Structure and Properties of 7050 Aluminum Alloy Forging
- Ertical Butt Welding Technology of Q355g Small Diameter Pipe TIG
- The Study on the Weldability of 1MnCrMoNi Alloy Steel and Q235 Carbon Steel
- Influence of Selective Laser Melting Process Parameters on Densification Behavior, Surface Quality and Hardness of 18Ni300 Steel
- High-Temperature Oxidation Behaviors of 30Cr25Ni20Si Heat-Resistant Steel in Air
- Study on Fatigue Behaviors of 0Cr21Mn17Mo2N0.83 High Nitrogen Stainless Steels
- An Optimization Case Study on Single Point Incremental Forming
- Effect of Welding Parameters on the Tensile Strength of the Weld-Deposition Layer
- Nanoparticles Size in Fe73.5Cu1Mo3Si13.5B9 Melt
- Research Progress in Nickel Base Single Crystal Superalloys
- Welding Operation Technique of Welding Electrode Arc Welding Overhead Welding Test Board
- Influence of Input Factors on Material Removal Rate in PMEDM Cylindrical Shaped Parts with Silicon Carbide Powder Suspended Dielectric
- Effect of Input Parameters on Electrode Wear in PMEDM Cylindrical Shaped Parts
- Study the Influence of Processing Oil on the Physical Mechanical and Adhesion Properties of Ethylene Propylene Diene Monomer/Chlorobutyl Blend to Polyester Fabric
- Development of Natural Rubber Latex Foam for Hand Exercising Application
- Study on Preparation of Microstructured Optical Membrane
- Influence of Layer Thickness and Continuous Carbon Fiber on the Mechanical Property of 3D Printed Polyamide
- The Ternary Blends of TPS/PBAT/PLA Films: A Study on the Morphological and Mechanical Properties
- Effect of Zeolite on Mechanical and Barrier Properties of PBAT Films for Life Extension of Agricultural Products
- Influence of Layer Parameters in Fused Deposition Modeling Three-Dimensional Printing on the Tensile Strength of a Product
- Verifying the Gas Heating Method for Injection Molding
- Structural Design and Dynamic Analysis of Carbon Fiber Reinforced Plastic Shaft with Metal Parts
- Multilayer Coatings Using Epoxy and Superabsorbent Polymer Composite Material with Self Healing Property
- Development of Conductive Packaging for Beverage Processing by Ohmic Heating
- A Comparative Study of Photodegradation Behavior Sodium Niobate Nanowires and Microcubes
- Effect of Sintering Temperature on Properties and Microstructure of Alumina-Aluminum Cermet via Vacuum Sintering Method
- Interface Optimization of Al2O3-Fe Composite Materials Prepared via Vacuum Sintering Method
- The Sintering Process and Mechanism of YAG Pore Gradient Ceramics
- Effect of Forming Technology on the Properties of Quartz Sands Porous Materials via Dry Pressing Method
- Preparation and Characterization of Coated Alumina/Aluminum Cermet Composite Powder via Ball Milling Method
- Resin Made Long-Period Fiber Grating Structure for Tunable Optical Filter inside Single-Mode Fiber
- Ionic Diffusion and Dissociation in Room-Temperature Ionic Liquids
- Copper (II) Oxide Powder Prepared by Low Temperature Hydrothermal Method
- First-Principles Study of Effects of Combined Ti Supervalent Cations and Lithium Ion Vacancies Doping on Crystal and Electronic Structures and Conductivity in LiFePO4
- Mn3O4 Nanosheets Decorated on Graphene Modified Carbon Cloth with Improved Pseudocapacitive Performance
- Influence of Synthetic Concentration on Surface Properties of SnO2 Nanofilm by Hydrothermal Method
- Progress in Preparation of Electron Transport Layer in Perovskite Solar Cell
- Optimization of Protoplast Formation, Regeneration, and Viability in Sorangium cellulosum
- One-Step Rapid Synthesis of Al-Based Ag Dendrites for Highly Active and Cost Effective SERS Plasmonic Substrates
- The Research Progress of Fluorescent Probes for Detection of Selenols
- The Effect of Ta2O5 on the Densification Behaviour and Mechanical Properties of Zirconia-Toughened Alumina (ZTA) Composites Prepared by Two-Stage Sintering
- Two-Stage Sintering of Nb2O5 Doped Zirconia Toughened Alumina (ZTA) Composites
- Hydrothermal Synthesis of Copper (II) Oxide Microparticle
- Effects of Abrasive Particles on Lubricating Property of Oil-in-Water (O/W) Emulsions for Cold-Rolled Strip
- Research on Tribological Properties of Environment-Friendly Nano-MoS2 Water-Based Rolling Liquid
- Research Progress of Rare Earth-Based Hydrogen Storage Alloys
- Study on Preparation and Characterization of La2O3 Derived from Thai Monazite Ore Processing Supported Coal Fly Ash Catalyst
- Physicochemical Characterization of Natural Diatomite from Lampang Province, Thailand as a Solid Catalyst
- Development of Alginate Based Active Films Containing Turmeric Essential Oil
- Enhance Cellulose Film Production from Oil Palm Trunk under NaOH/Urea Solution at Low Temperature
- Study on the Construction and Performance of Completion Fluid System in Fractured Carbonate Reservoir
- Shale Stability Evaluation and Leakage Control of High Density Clay Free Brine Drilling Fluid
- IrO2-Based Monolithic Electrodes for Efficient and Stable Oxygen Evolution Reaction in Acid
- Research and Application of Concrete Winter Construction Techniques on Cast-in-Place Beams
- Research on Effect of Equivalent Diameter of Voids on Sound Absorption Performance of Porous Asphalt Concrete Based on Grey Entropy Method
- Study on Open-Graded Cold Mend Material's Road Performance of Porous Asphalt Pavement
- Research on Mix Proportion Design Method of Cement Concrete for Road Mixed with Antifreeze Admixtures Sealed in Capsules
- Research on Early Warning System for Plastic Shrinkage Cracking of Cement Mortar Based on Constitutive Equations
- Effect of Raw Materials Formula on Performance of Steel Slag Cement
- Consolidation Behavior of Clay Supported by Soil-Cement Column
- Effect of Moisture Content on Ultrasonic Infrared Detection of Concrete Structures
- Enhancement of Thermal and Sound Insulation Properties of Cement Composite Roofing Tile by Addition of Nanocellulose Coated Pineapple Fiber and Modified Rubber Tire Waste
- Research the Microstructure and Properties of Modified Asphalt from Dry SBS-T
- Mechanical Properties and Microstructure of Oil Palm Fiber (OPF) Partial Replacement of Cement
- Numerical Analysis of Effect of Different Initial Morphologies on Molten Pool Flows
- Finite Element Simulation of Micro-Thermoelectric Generators Based on Microporous Glass Template
- Numerical Study of Radiative Heat Flux Emitted by Stainless Wire-Net Porous Media
- Numerical Simulation and Parameter Study of Radial Forging of Conical Tube
- Mathematical Modeling of the Magnetic Field Effect on Molten Iron Crystallization
- Mode Stresses for the Interaction between Two Inclined Cracks in Bonded Two Half Planes
- Calculation of Stretch Stress of Double-Layer Plate Composites
- Effects of External and Internal Porous Structure Design on Mechanical Properties of Porous Scaffold: A Finite Element Analysis
- Modeling the Process of Obtaining Bars from Aluminum Alloy 01417 by Combined Rolling-Extruding Method with Application of the Deform-3D Complex