Material Engineering and Application II : Selected, peer reviewed papers from the 4th International Conference on Material Engineering and Application (4th ICMEA 2019), August 23-29, 2019, Hong Kong, China /
Saved in:
| Meeting name: | International Conference on Material Engineering and Application (4th : 2019 : Hong Kong, China) |
|---|---|
| Imprint: | Switzerland : Trans Tech Publications Ltd, [2020] ©2020 |
| Description: | 1 online resource. |
| Language: | English |
| Series: | Key Engineering Materials 1013-9826 ; Vol. 841 Key engineering materials ; v. 841. |
| Subject: | Engineering -- Congresses. Materials science -- Congresses. Information technology -- Congresses. Materials -- Congresses. Engineering. Information technology. Materials. Materials science. Electronic books. Conference papers and proceedings. |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/12355336 |
Table of Contents:
- Effect of Plating Thickness on Fatigue Strength of Galvanized Steel
- Influence of Nano-Silica Dosage on Properties of Cement Paste Incorporating with High Calcium Fly Ash
- Mechanical and Shrinkage Behaviors of Ductile Fiber-Reinforced Polymer Repair Mortar
- Development of a TAPE-Agar Liquid Gel Bandage
- Frequent Start-Stop Test Study of Graphene Coatings on Journal Bearings
- A New Technology to Prevent the Formation of Limescale in Hot Water Supply Systems
- Development of a CuFe2O4 - Reduced Graphene Oxide-Based Electrochemical Sensor for Malathion
- Nano-Crystallization of Steel Surface by Slide-Burnishing
- Numerical Simulation of Material Plastic Deformation Using the Drawing Forming Process of Contoured Internal Surface Tubes
- Solvent Absorption and Dissolution Kinetics Modelling for the Chemical Recycling of Waste Plastic Laminates
- Feasibility of Paper Production from Oil Palm Trunk Using Arrowroot Flour as a Binder
- Study on Morphology Features and Mechanical Properties of Nanofibers Films Prepared by Different Composite Electrospinning Methods
- Studying the Stability and Conductivity of the Composite Films via Electrospinning/Spray Process
- Electrospinning/Spray: The Interaction between Graphene Nanosheets and Different Nanofibers
- Tensile Properties of Cellulose-Filled Recycled Thermoplastic Composite Filaments for 3D Printing
- 3D Reconstruction of Microstructure for Centrifugal Casting Babbitt Lining of Bimetallic Bearing Based on Mimics
- X-Ray Powder Diffraction Data and Crystal Refinement of Ternary Compound Ti4ZrSi3
- The Green Preparation of Cellulose Fibrils from Oil Palm Leaf Stalk Fibers for Hydrogel Applications
- Evaluation of Recycled Aggregate (RAP) Presence Impact under Indirect Tensile Strength of Bitumen Stabilized Mix with Foamed Asphalt for a Base Layer
- Scanning Electron Microscope in Rocks and their Comparison with Physical-Mechanical Properties
- Natural Additive to Retard the Setting of a Mortar and Increase its Resistance
- Electrochemical Synthesis of Hydroxyapatite Nanosheet-Assembled Porous Structures with Bipolar Membrane
- The Comparison between Mechanical Properties of Laser-Welded Ultra-High-Strength Austenitic and Martensitic Steels
- Mechanical Properties of Concrete Using Treated Recycled Concrete Aggregate in Marine Environment
- Failure Analysis of Spur Gears Used in Transmission System Applied on a Hand Tractor
- Biofuel Production from Jatropha Bio-Oil Derived Fast Pyrolysis: Effect of Catalysts Supported
- Experimental Investigation and Modelling of Claystone from Mae Moh Coal Mine, Thailand
- Preliminary Investigation of Crushed Rock-Based Geopolymer for Road Applications
- Hemp Fiber Reinforced Geopolymer Composites: Effects of NaOH Concentration on Fiber Pre-Treatment Process
- Crushed Rock Geopolymer as a Future Road Construction Material: An Evaluation on Strength Performance and Compaction Characteristics
- Response Behavior of Local Surface Failure due to Repetitive Impact of Stainless Steel
- Study of Properties of 3D Printed Short Carbon Fiber Composite
- High Purity Lime as an Ecologic Alternative for Construction Mortars and Pastes
- Cemented Mortar Matrices Densified with Organic Additions
- Evaluation of the Electrical Resistivity, Ultrasonic Pulse Velocity and Mechanical Properties in Portland Cement Pastes Type II
- Characterization of Hydraulic Concrete with Polystyrene-Based Emulsion
- Preparation and Performance Study of Fluorosilicone Oligomer Anti-Sticking Coatings
- The Effect of Alloying on the Fractional Composition, Shape and Grain Size Distribution of the Structure Alloy GAP the Fe-Nd-B System
- Optimization of Methylene Blue Adsorption via Functionalized Activated Carbon Using Response Surface Methodology with Central Composite Design
- Rejection Rate Reduction of the Automotive Thermoplastic Parts in Injection Moulding Using Response Surface Methodology
- Simulation of Gap Flow Field in EDM Process Uesd Oil-in-Water Working Fluid
- Synthesis, Preparation and Characterization of Amine-Induced Bacterial Cellulose-Poly(Vinyl Alcohol) Semi-Interpenetrating Network Hydrogel
- Effect of Substrate Temperature on the Electronic Properties of MgO Thin Films on Si (100) Grown by Electron Beam Evaporation
- Button of Hydroxyapatite Composite for Craniotomy Flap Fixation: Fabrication and Mechanical Properties
- Analysis of Physical and Mechanical Properties of Backhoe's Bucket Repairment with Cladding Methode
- Fabrication Study of Cu-C-Ni for EDM Electrode by a Sintering Technique
- Synthesis and Characterization of Active Biocarbon Material for Use in Cosmetics and Personal Care Products
- Characterization of Adsorbents Derived from Palm Fiber Waste and its Potential on Methylene Blue Adsorption
- Potential Activity Evaluation of Phosphorus on CoMo/Al2O3-TiO2 Catalysts to Co-Processing Model
- Investigation of the Tensile and Flexural Behavior of Polylactic Acid Based Jute Fiber Bio Composite
- Fatigue and Fracture Mechanism of Aluminum-Carbon Fiber Reinforced Hybrid Composites
- Fatigue-Corrosion of High Strength Steels in Synthetic Seawater under Cathodic Protection
- Effect of Cr and Si Contents on the Magnetic and Mechanical Properties of Fe-Cr-Si Alloys by MIM Process
- Microstructure and Mechanical Properties of Laser Welded 316L SLM Parts
- The Effect of Calcination Temperature on Metakaolin Characteristic Synthesized from Badau Belitung Kaolin
- Flavor Quality Changes of Turbot (Psetta maxima) Stored at -2 and 0°C
- Investigation on Mechanical Behavior of Sisal Fiber Reinforced Polylactic Acid and Sisal/Epoxy Composites
- Evaluation of Mechanical Properties of Sugarcane Reinforced Hybrid Natural Fibre Composites by Conventional Fabrication and Finite Element Method
- Study of Deep Cryogenic Treatment Process Effect on Microstructure and Properties of CuBeZr Alloy
- Casting of High Aluminum Content AM Series Magnesium Alloys by Using a Horizontal Twin Roll Caster
- Estimation of Cold Roll Forming Characteristics of Wrought Magnesium Alloy with Tension-Compression Asymmetry
- Analogy of Non-Destructive Tests for the Detection of Defectologies in Aluminium Cylinder Heads
- Surface Roughness Prediction Based on Acoustic Emission Signals in High-Precision Diamond Turning of Rapidly Solidified Optical Aluminum Grade (RSA443)
- Flow Field Analysis and Experimental Investigation of Electrochemical Etching
- 3D FEM Study of the Flow Uniformity of Flat Polypropylene Film/Sheet Extrusion Dies
- Prediction of the Fatigue Life of the SAE 5160 Carbon Steel Coil Spring Based on Strain-Life Approach
- Design and Optimization of Die Body for Polymer Extrusion