Recent advances in materials science and engineering. II, 2nd International Conference on Materials Science and Engineering: Recent Advances and Challenges (ICMSE-RAC 2019) /
Saved in:
| Meeting name: | International Conference on Material Sceience and Engineering : Recent Advances and Challenges (2nd : 2019 : Cairo, Egypt) |
|---|---|
| Imprint: | Switzerland : Trans Tech Publications, [2020] ©2020 |
| Description: | 1 online resource (1 volume.) |
| Language: | English |
| Series: | Key engineering materials ; volume 835 Key engineering materials ; v. 835. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/12355327 |
Table of Contents:
- Electrochemical Performance of Nanocrystalline Zinc Ferrite Films Synthesized Using Electrodeposition
- Microstructure Aspects of 7075 Al-SiO2 Composite Foams Produced by Direct Melt Foaming Method
- Exo-Inoculant Modification of Secondary Phase Precipitation in H13 Tool Steel
- Hydrostatic Training and Characterization of near Stoichiometric Ni-Mn-Ga Alloy
- Coal Desliming Using Annular Rinse Water Hydrocyclone
- Surface Roughness of Nanohybrid Composites with Different Monomers after Finishing and Polishing with Different Polishing Systems
- Influence of Molybdenum Replacement by Tungsten in Cr Mo V Steel
- Influence of Chromium Content and Prior Deformation on the Continuous Cooling Transformation Diagram of Low-Carbon Bainitic Steels
- Microstructure Evolution of NiTi Magnetron Sputtered Thin Film on Different Substrates
- Production of Ferrosilicoaluminium from Aluminum Slag and Local Ore Via Carbothermic Reduction
- Influence of Nitrogen on Oxidation Resistance of Automotive Steel Grades
- Aluminum Surface Inclusions of Insoluble Lead Enhanced through Mechanical Attrition of Al Substrates
- Effect of Welding Processes on Mechanical and Microstructural Characteristics of DP780 Steel Welded Joints for the Automotive Industry
- Influence of Tinning Material on Interfacial Microstructures and Mechanical Properties of Al12Sn4Si1Cu /Carbon Steel Bimetallic Castings for Bearing Applications
- Structural Properties and Capacitive Performance of Cathodically Deposited Manganese Dioxide Film on Electrophoretically Deposited Reduced Graphene Oxide
- Stress Corrosion Cracking of High-Pressure Scrubber in Urea Plant: A Case Study
- Study of the Reduction of Fe on Reduced Graphene Oxide as a Catalyst for Carbon Monoxide Reduction
- Microscopic and Metallurgical Studies as a Function on Forensic Investigation of Electrical Fires
- New Approach for Multiplying the Strength and the Formability of Cold Rolled BCC Based Structure Steel through Ultra Fine Structure Technique
- LiMn1.5Ni0.25Fe0.2M0.05O4 Nanoparticles as a Cathode Material for Rechargeable Li-Ion Batteries
- Microstructure and Wear Behavior of Squeezed Magnesium Alloy (AM100) Based Composites Reinforced with ZrB2, Graphite and Hybrid of ZrB2 and Graphite Particles
- Development of Carbidic Austempered Ductile Iron (CADI)
- Mechanical Properties of Thin Wall Ductile Iron: Experimental Correlation Using ANOVA and DOE
- AlSi-SiC Composites for Automotive Brake Rotor
- The Cyclic Extrusion Behavior of Severe Plastic Deformation (CEC) of Aluminum Alloy 6061
- Structural, Optical and Microstructural Properties of TiNi Thin Films before and after Oxidation
- Effect of Inorganic Doping on the Thermoelectric Behavior of Polyaniline Nanocomposites
- Beneficiation and Separation of Egyptian Tantalite Ore
- Characteristics of Ni- Cr Binary Alloys Produced by Conventional Powder Metallurgy
- Evaluation of Corrosion Behavior of Different Grades of Cast Iron Insodium Chloride Solutions
- Determination of Charge Coefficient of Piezoelectric Films Using a Combined Finite Element Model and Dynamic Loading Technique
- Effect of Different Normalizing Processes on Microstructure, Precipitation Behavior and Mechanical Properties of V-Ti-Micro-Alloyed Steel Alloys
- Weldability of Dual Phase Steel Containing Boron
- Effect of Cooling Rate and Aging Process on Wear Behavior of Deformed TC21 Ti-Alloy
- Friction Stir Spot Welding of AA2024-T3 with Modified Refill Technique
- Corrosion Behavior of Ti-7 Wt.% Mn Alloy in Artificial Saliva
- Effect of Metallurgical Waste Properties on Determining Suitable Recycling Method
- Casting and Laser Surface Melting of 316L Stainless Steel from Scrap Resources
- An Investigation on Structural and Optical Properties of Nanocrystalline Bismuth Ferrite and Manganese Sillenite Powders
- Three Generations Micro-Allying Steel Processing: Thirty Years of Successive Work at CMRDI
- Thin Films in Triboelectric Nanogenerators for Blue Energy Harvesting: Fabrication, Characterization, and Modeling
- Effect of Aluminum and Vanadium on Retained Austenite Stability and Work Hardening in Silicon Free TRIP Steel
- Structural, Microstructural and Electrochemical Studies of Co/Mn Derived Oxides as Protective Layers for Intermediate Temperature SOFCs
- Optimization and Characterization of Aluminum Induced Texture Using Radio Frequency Power
- Effect of Nano ZrO2 Additions on the Mechanical Properties of Ti-12Mo Composite by Powder Metallurgy Route
- Deposition, Characterization, Performance of Cadmium Sulfide Quantum Dots Thin Films Using SILAR Technique for Quantum Dot Sensitized Solar Cell Applications
- Corrosion Behavior of Super Austenitic Stainless Steel 904L Weldment in Sulfuric Acid Media Used for Leaching Application