22nd Brazilian Conference on Materials Science and Engineering : 22nd CBECIMAT : selected, peer reviewed papers from the 22nd Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 6-10, 2016, Natal, Barzil /
Saved in:
| Meeting name: | Congresso Brasileiro de Engenharia e Ciência dos Materiais (22nd : 2016 : Natal, Brazil) |
|---|---|
| Imprint: | Zurich, Switzerland : Scientific.Net : Trans Tech Publications, Ltd., [2018] ©2016 |
| Description: | 1 online resource |
| Language: | English |
| Series: | Materials science forum ; Volume 930 Materials science forum ; v. 930. |
| Subject: | Materials science -- Congresses. TECHNOLOGY & ENGINEERING -- Engineering (General) TECHNOLOGY & ENGINEERING -- Reference. Materials science. Electronic books. Conference papers and proceedings. |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/12351895 |
Table of Contents:
- Hydrothermal Synthesis of Zeolite a Using Non-Calcined Diatomite
- Gelatinization Technique Applied to the Processing of Porous Clay Bodies
- Characterization of Kaolin Residues from the Jari#769; Valley Reservations Provided by Cadam S/A Company
- Phase Formation in Copper and Calcium Titanate Dielectric Ceramic Obtained by Polymeric Precursor Method
- Morphological and Structural Analyses in Carbonated Magnesium-Aluminum Hydrotalcites Co-Substituted with Iron III
- The Effect of Iron (III) Co-Insertion in Magnesium-Aluminum Hydrotalcites Obtained by Precipitation Method at pH 11
- Proppants Development and the Shale Oil and Gas Market Perspective
- Analysis of the Effect of Cyclic Fatigue on the Flexural Strength of a Ceramoceramic System Used in Dental Prostheses
- Characterization of Biomaterial and Tissue Response Analysis after Implantation
- Comparative Analysis of the Influence of 10 and 5% Hydrofluoric Acid Etching on the Average Roughness of Lithium Disilicate Used in Dental Prostheses
- ZrO2 Pre-Sintered Blocks (3%mol-Y2O3) with Color Gradient for Dental Prostheses
- Synthesis and Characterization of Novel Crystalline Mesoporous Beta-Tricalcium Phosphate Nanoparticles
- Study of the Zirconium and Silicon Homovalent Dopants Insertion on the Structure and Bandgap Energy of Titanium Dioxide Powders
- Structural and Thermal Studies of Titanium Dioxide Gel Modified with Anatase Isostructural Zircon Silicate
- Morphological, Structural, Electrical and Optical Properties of Copper-Doped Zinc Oxide Films Deposited by Spray Pyrolysis
- Evaluation of the Structural, Photonic and Morphologic Effects Caused by Zinc Doping in the Titanium Dioxide Powder Samples Obtained by Sol-Gel Method
- Estimate of the Nanoparticles Size of Magnetite Produced by Co-Precipitation Method
- Analysis of Europium Doped Strontium Aluminate Synthesized by Route of PVA Evaporation
- Structural Effects on Perovskite Phase Formation for PZT Powders Obtained by Polymeric Precursor Method
- Photonic Properties of PZT Powders along the Crystallization Process of the Polymeric Precursor
- Brick Drying Simulations by Finite Volume Method
- Study on the Influence of the Wastes from Cashew Industry on Environmentally Friendly Bricks
- Iron Ore Tailing as Addition to Partial Replacement of Portland Cement
- Sericitic Phyllite as Addition in Portland Cement
- Use of Waste from Construction and Demolition in the Manufacture of Soil-Cement Bricks: A Sustainable Alternative
- Phenomena of Capillarity and Drying in Gypsum Blocks: Development of Experimental Apparatus for the Characterization of Representative Specimens
- Preparation and Compressive Strength Evaluation of Concrete Containing Oil Sludge as Additive
- In Situ Hydration of Sulfoaluminate Cement Mixtures Monitored by Synchrotron X-Ray Diffraction
- Influence of Glass Residue Addition on the Properties of Adhesive Mortar
- Effect of the Addition of the Waste Generated from the Feldspar Mining on the Obtainment of Ceramic Brick
- Physical Properties, Mechanical Strength and Microstructure of Fired Clay Brick Waste and Metakaolin Geopolymer Mortars
- Study of the Effect of Compatibility Agents in the Incorporation of Rice Hull Ash in Polypropylene Compounds: Mechanical Properties
- Hybrids Obtained from Monoglyceride of Castor Oil with Hydroxyapatite for Applications in Bioinduction of Bone Tissue: Synthesis and Characterization
- Physical Properties of PHB/VMF2 Nanocomposite Microcapsules in Water
- Study of Double Walled Corrugated Cardboard as an Alternative Material for Eco-Friendly Designed Furniture
- Comparative Analysis of the Tensile Properties of Polyester and Epoxy Composites Reinforced with Hemp Fibers
- Absorption Evaluation of Water in Panels from Elephant Grass with Eucalyptus sp. Leaves
- Antimicrobial Activity of PET-Silver Nanocomposite Filaments
- Study of Hybrid Membranes Prepared with the Addition of Calcium Chloride
- Characterization of PET-Silver Nanocomposite Filaments
- Addition of Zinc Oxide Nanoparticles in Biodegradable Polymer and Evaluation of its Antimicrobial Activity
- Generation of Latex Films on Glassy Substrates by Evaporation Induced Self-Assembly (EISA) Process
- Factorial Experimental Planning Applied for Evaluated Effect of Matrix Temperature and Screw Rotation Speed of Extrusion in Mechanical Properties and Dimensional Changes in PVC Pipes
- Analysis of the Influence of Injection Process Parameters of Polymer Blends from Printers
- Degradation of Colored Polystyrene Films
- Biocomposite of Ultra-High Molecular Weight Polyethylene and Hydroxyapatite with Antibacterial Properties by the Incorporation of Zinc Oxide Nanoparticles
- PA6/Sodium Clay Membrane for Application in Petroleum Sector
- Effect of Drying Temperature in Biopolymeric Films of Cassava Starch and its Effect on Wettability, Water Vapor Barrier and Mechanical Properties
- Influence of the Geometric Characteristics of the Mini-Implants on Mechanicals Properties Using Artificial Bone Similar to Anterior, Middle and Posterior Regions of the Jaws
- Active Packaging Using Orange Oil Incorporated into PBAT Biodegradable Films
- Micromechanical Modeling of Dual-Phase DP600 Steel Sheet Plastic Behavior Based on a Representative Volume Element Defined from the Real Microstructure
- Modeling and Simulation of Nucleation and Growth Transformations with Nucleation on Interfaces of Kelvin Polihedra Network
- Evolution of Individual Grains in 3d Microstructure Generated by Computational Simulation of Transformations Involving Two Phases
- Micromechanical Modeling of DP600 and DP800 Steels Plastic Behavior Based on the Mori-Tanaka Homogenization Method
- Effects of Heat Input Conditions on the Local Thermophysical Properties of Super Duplex Stainless Steels
- Study of Wear on Nicraly Coating Sprayed by HVOF on 316 Steel and Laser CO2 Remelting Process
- Effect of Niobium and Heat Treatment on the Microstructure and Mechanical Properties of SAE 8620 Steel
- Effect of Controlled Cooling after Hot Rolling on the Mechanical Properties of a Low Carbon Niobium Microalloyed Steel Wire Rod
- Effects of Different Annealing Times on Microstructure and Tensile Properties of Joints Welded 5052 Aluminum Alloy in Marine Industry
- Effect of Cooling Rate on the Transformation Temperatures of Ni50Ti36Hf14 Melt-Spun Ribbons
- Limit Strains Analysis of Advanced High Strength Steels Sheets Based on Surface Roughness Measurements
- Determination of Mechanical Properties for Microhardness Mapping in a 5052 Aluminum Alloy Welded by Mig Process
- Evaluation of the Bactericidal Properties of the Biomimetic Coating of Ha Doped with AgNO3
- Electrochemical Behavior of Hot Treated Ti-12Mo-8Nb Alloy
- Effect of Solution Annealing Time on the Microstructure and Corrosion Resistance of Duplex Stainless Steel
- Influence of Strain Amplitude on the Functional Properties and Aging at Room Temperature of a Superelastic NiTi Alloy
- Analysis of Mechanical and Micro-Structural Properties of Shaft Tips Manufactured in ABNT 1045 Steel Applied in Transportation Ore Fractured Early
- Observations on Dynamic Strain Aging Manifestation in Inconel 718 Superalloy
- Study of the Abrasion Resistance of Fe-Cu-Nb and NEXT 100® Metallic Matrices for the Manufacture of Diamond Tools
- Relationship between Electrical Conductivity and the Stage of the Heat Treatments of Aging and Overaging of the Aluminum Alloy AA2024
- Study of the Correlation between Microstructure and Corrosion Resistance of the AZ91D Magnesium Alloy
- Comparative Analysis of Wear Behavior of Al 7075 Alloy, AISI 1020 and AISI 1045 Carbon Steels
- Evaluation of Spheroidization on Erosive Wear of ASTM A106 Steel Used in Heat Exchangers
- Effect of Passivation Treatment on Adhesion and Protective Properties of Steel Coated with Polymeric Film
- Influence of GPTMS Precursor Concentration as Pretreatment of Galvanized Steel
- Behavior of Polypyrrole Film Chemically Polymerized with Lauric Acid on Copper Surface
- Influence of Alloying Elements Zr, Nb and Mo on the Microstructure and Magnetic Properties of Sintered Pr-Fe-Co-B Based Permanent Magnets
- Influence of Milling Time on Magnetic Properties and Microstructure of Sintered Nd-Fe-B Based Permanent Magnets
- Comparison between Magnetic Anisotropy Energy and a Parameter to the Assessment of Magnetic Property of Electrical Steel
- Recycling Chips of Stainless Steel by High Energy Ball Milling
- Study of the Thermal Diffusivity Variation in Thin Duplex Steel Plates Welded by GTAW Process
- Influence of Thickness on Magnetic and Microstructural Properties in Electrical Steels Semi-Processed of Low Efficiency
- Diffusion Analyses Using GDOES Technique of the 22MnB5 Press Hardened Steel with Al-Si and Zn-Ni Coatings
- Ellipsometric Characterization of AZ31 Magnesium Alloy
- Effect of Copper and Magnesium on the Microstructure of Centrifugally Cast Al-19%Si Alloys
- Corrosion Characterization of AISI 304 Stainless Steel Filter
- Study on the Viability of the Recycling by Electric Arc Melting of Zirconium Alloys Scraps Aiming the Scalability of the Process
- Microstructure Optimization in #948;-TRIP Steels with Al and Nb
- Evaluation of the Residual Stress and Microstructure of Extruded and Shot Peened Aluminum Alloy 6082
- Microstructural Evaluation of a 5052 H34 Aluminum Alloy Used in Multilayered Armor
- Development of a Microtorquemeter for the Evaluation of the Implant Abutment Interface Behavior
- Mechanical Properties of NiTi Shape Memory Alloys Welded Joints: A Comparative Study between the GTAW, PAW and LBW Processes
- Dechroming: An Alternative Treatment for Leather Shavings, to Obtain a Biocompatible Collagen without Environmental Impacts
- Characterization of Galvanic Sludges Waste Derived of the Metal Plating Industry from Cariri Region, Northeastern of Brazil
- Evaluation of Microstructural Phenomena in the Utilization of Porcelain Tile's Shards to Obtain New Ceramic Materials
- Photo-Oxidation of Tetracycline Adsorbed in Clayand in Aqueous Suspension
- Kinetics Modelling of the Adsorption Process of Zinc Ions by Glass Microparticles
- Use of Retorted Shale as Sulfur Adsorbent
- The Use of Palygorskite as a Catalytic Support for TiO2 on the Degradation of Herbicide: A Review
- Development of Asymmetric Ceramic Membranes Coated with Residue of Granite for Use in Wastewater Treatment
- Characterization of Coal Fly Ash for Use in Synthesis of Zeolites
- Residue Characterization from Polishing Granite Submitted to the Hydrocycloning Process
- Assessment of the Photocatalytic Efficiency of TiO2 in the Presence of Sulphate
- Electrochemical Characteristics and Microstructures of Activated Carbon Powder Supercapacitors for Energy Storage
- Horseradish Peroxidase Immobilized on Polyaniline onto Monocrystalline Silicon for Glyphosate Herbicide Detection
- The Production of Reduced Graphene Oxide by a Low-Cost Vacuum System for Supercapacitor Applications
- Chemical and Physical Variations on Cotton Wires
- Selective Copper Oxide Coating on Aluminum Panels for Solar Heating Absorption
- Synthesis and Characterization by Ellipsometry of Cationic Membranes for Fuel Cells
- Processing and Characterization of ZrO2-TiO2 Porous Films by Dip Coating for Application as Environmental Sensors
- Effect of Hydrogen Decrepitation Pressure on the Particle Size of Rare Earth Based Alloys for Ni-Mh Battery Production