Advanced materials and engineering materials. 7th International Conference on Advanced Materials and Engineering Materials : (7th ICAMEM 2018) / VII :

Saved in:
Bibliographic Details
Meeting name:International Conference on Advanced Materials and Engineering Materials (7th : 2018 : Bangkok, Thailand)
Imprint:Durnten-Zurich, Switzerland : Trans Tech Publications, [2018]
Description:1 online resource : color illustrations
Series:Key Engineering Materials ; vol. 777
Key engineering materials ; v. 777.
Subject:Materials science -- Congresses.
Materials -- Congresses.
TECHNOLOGY & ENGINEERING -- Engineering (General)
Materials science.
Electronic books.
Conference papers and proceedings.
Format: E-Resource Book
URL for this record:
Hidden Bibliographic Details
Varying Form of Title:ICAMEM 2018
Other authors / contributors:Wei, Pengsheng, editor.
Notes:Selected, peer reviewed papers from the 7th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2018), May 17-18, 2018, Bangkok, Thailand
Includes bibliographical references and index.
Online resource; title from PDF title page (EBSCO, viewed October 4, 2018).
Table of Contents:
  • Anti-Microbial and Self-Cleaning of Natural Rubber Latex Gloves by Adding Mangosteen Peel Powder
  • Experience of Development of Epoxy Composites Appendix of Methods of Rank Correlation
  • Characteristics of Fabric-Foam-Fabric Plied Material: Water Transport Capability
  • Trials of Developing a Magnetic Aluminum Metal Matrix Composite through Friction Stir Spot Forming
  • High Density Polyethylene/Date Palm Fiber Composites: Effect of Fiber Loadings on the Dynamic Mechanical Thermal Properties
  • Enhancing Mechanical Properties of Polyvinyl Alcohol Fiber Reinforced High Density Polyethylene Composites
  • Approximation of the Rheological Properties of Composite Materials
  • Preparation and Properties of a Novel High-Strength Foam
  • Improvement Filler-Rubber Interaction and Mechanical Properties of Silica/NR Vulcanizates by Using Masterbatch Processing
  • The Synthesis and Characterizations of Aluminums Doped Barium Ferrite (BaAlFe11O19)
  • Influence of Sintering Temperature on Structure and Electrical Properties of Modified-BNKT Lead-Free Piezoelectric Ceramics
  • Effects of Sintering Temperatures on Structural, Electrical and Mechanical Properties of BNKT Piezoelectric Ceramics
  • Study on the UV Curing Reactivity of Micro-Injection UV-Curing Molding
  • Toughened Poly(Trimethylene Terephthalate) by Reactive Blending with PTW
  • Peroxide Induced Reaction as a Cross-Linking Method in PHBV Biomaterial Gate Dielectrics
  • Influence of Ball Milling Process on the Pinned Effect of Al2O3/Al Cermet Composite Powder
  • Preparation and Properties of YAG Porous Ceramics via the Casting Method
  • Morphology and Crystallization Behavior of PTT Blends with PTW
  • Investigation on Thermal Absorptivity of PCM Matrix Material for Photovoltaic Module Temperature Reduction
  • Development of Thermal Energy Storage as a Supplemental Heat Source for Solar Dryer
  • Fabrication Processes of SOI Structure for Optical Nonreciprocal Devices
  • All Solution-Processed Quintuple-Layer Organic Light-Emitting Diodes Containing Organic-Inorganic Hybrid Active Layers Fabricated by Sol-Gel Method
  • Optical Properties and Carrier Transport in a Biased GaAs/AlAs Asymmetric Quintuple-Quantum-Well Superlattice
  • Crack Reduction in Tabbing and Stringing Processes for Solar Cells
  • Improved TiN Deposition on the SKD11 with Equally Spaced Multi-Sources of Cathode Arc
  • Analysis of Junction Temperature of AlGaInP LED
  • Collection of Silicone Nanoparticles in Ingot Growing Process and Analysis of Particle Characteristics
  • Research Progress of Preparation Technology of Nano Copper Powder for 3D Printing
  • Printed PZT Thick Films Implemented for Functionalized Gas Sensors
  • Synthesis of Nano-Sized Materials Using Novel Water Assisted Solid State Reaction Method
  • Calcium Carbonate Reinforced Polypropylene Nanocomposites: Effect of Nano-Filler Loadings on the Melt Rheological Properties
  • Thermal Properties of Acrylic Resin Denture Base Material Containing Silver Nanoparticle Synthesized from Aqueous Extract of Boesenbergia rotunda
  • Flexural Strength and Viscoelastic Properties of Acrylic Resin Denture Base Material Containing Silver Nanoparticle Synthesized from Fingerroot Aqueous Extract
  • A DFT Study of Vanadium Doped Gold Nanoalloy Clusters
  • Synthesis of Novel Geopolymer Supported Nano Bimetallic Catalysts and its Application for Isopropanol Dehydrogenation
  • Microstructure and Properties of Aminated Carbon Nanotubes/Graphene Oxide-MnO2 Composite for Supercapacitor Electrodes
  • Structural-Phase Changes of Graphite during Mechanochemical Treatment
  • Alkaline Stability of Polyaniline Synthesized Using Pulsed Inductively Coupled Plasma Device
  • The Use of Factorial Design to Improve a Harmony Search Algorithm to Synthesize Heat-Integrated Distillation Sequences
  • Preparation of Crude Oil Flow Improver from Vegetable Oil and the Performance Evaluation
  • Performance of the Castor Oil in Methanol-Gasoline as a Bi-Functional Additive
  • Empirical Model of Operating Temperature and Pressure Effect towards Pure and Binary O2/ N2 Gas Permeability in Polysulfone Membrane
  • Metakaolin Based Geopolymer from Thailand as an Adsorbent for Adsorption of Multi- and Mono- Cations from Aqueous Solution
  • Simulation of CO2 Adsorption to Enhance Adsorbent Material Efficiency
  • Lead (II) Removal from Contaminated Soils by Electrokinetic Remediation Coupled with Modified Eggshell Waste
  • Preparation of Activated Carbon-Based Catalyst from Candlenut Shell Impregnated with KOH for Biodiesel Production
  • Elevated pH on Bioleaching of Nandan Lead-Zinc Tailings as Building Materials
  • The Culturing Optimization of Bioleaching of the Lead-Zinc Tailings from Different Depths
  • Analysis of Microbial Community in Heap Bioleaching of Low-Grade Copper Sulfide Ores
  • Study on Wetting Behavior and Flotation Separation of Talc from Molybdenite of Non-Polar Surface Minerals
  • A Study on Fabrication of Ultra-Precision Diamond Tool and Length Optimization for Improving the Stability
  • Micro-Crack Analyses of Chromium Steel JIS-SCr 420 for Helical Gear Transmission
  • Effects of Processing Parameters on Microstructure and Properties of Aluminum-Silicon Alloy ADC12
  • Forming Limit Analysis of Molybdenum Reinforced Carbon Steels
  • Study on Densification Behaviour under Cold Forging of Sintered High Carbon Alloy Steels
  • Influence of Magnetic Field on Formation of Short Range Order Regions in Liquid Metals: Fluctuation Hypothesis
  • Characteristics of SAC305 Lead-Free Powder Prepared by Centrifugal Atomization
  • Experimental Investigation of Cut Profile in the Electrochemical Drilling of Titanium Alloy
  • Laser Micromachining of Titanium Alloy in Water with Different Temperatures
  • SMAW Electrodes Selection for Producing Hard-Faced Layer on FC25 Cast Iron Surface
  • Effect of Welding Consumables on Dissimilar AISI304/AISI1015 Steels Butt Joint Properties
  • Microstructure and Mechanical Properties of Functionally Graded Cemented Carbides of Coarse Grain Prepared by Solid Carburizing
  • Precipitate Phases in Normalized Ferritic/Martensitic Steel P92
  • Compression Test of Glass Fiber-Reinforced Ice
  • Rolling Contact Fatigue Life of 13Cr-2Ni-2Mo Stainless Steels which are Surface Treated by Induction Heating (IH) and Wide Peening Cleaning (WPC)
  • Prediction of the Hardness of Cu-Ti-Co Alloy Using Machine Learning Techniques
  • Study on Horizontal TIG Welding Process of 1Cr18Ni9Ti Stainless Steel Tube
  • Comparative Analysis on Corrosion Behavior of 316SS and 304SS in Subcritical and Supercritical Aqueous Systems
  • Research on Constitutive Relation of Metals under High Strain Rate
  • Analysis of Surface Roughness and Wear Mechanism when Cutting Hardened Steel Rolls
  • Effects of Annealing Process on Mechanical Properties of Weather-Resistant Steel Welding Joints
  • Effect of Efficient Purification on Mechanical Properties of 3003 Aluminum Alloy
  • Determination of Material Property for Non-Pneumatic Tire Spokes by Inverse Method
  • Material Characteristic for Capability Analysis of Solid Tire by Finite Element Method
  • Study of an Iterative Solution for Boltzmann Transport Equation and Calculation of Thermal Conductivity
  • Design and Performance Analysis of Vehicle Tyre Pattern Material Using Finite Element Analysis and ANSYS R16.2
  • Fabrication and Testing of Glass/Banana Hybridized Epoxy Mono Composite Leaf Spring under Static Loading
  • Evaluation of Flexural and Compressive Strength of E Glass/Jute and E Glass/Banana Hybrid Epoxy Hollow Composite Shafts
  • Failure Observation of 3D-Printed Thrust Bearing Specimens at Cross Section Observations in Dry Conditions
  • Application of GTN Model in Tensile Fracture of Pipeline Steel
  • Finite Element Analysis for Static Cushion Performance of (EPE) and Honeycomb Paperboard Combination
  • Mechanical Properties and Thermal Conductivity of Lightweight Clay Bricks Fabricated with a Powdered Marble Dust Additive
  • Tensile Behavior of Composite Concrete Reinforced Sugar Palm Fiber
  • Minimally Invasive Detection Technologies for the Defects in Ancient Timber Structural Building
  • Influence of Replacement Rate of Fine Aggregate by Blast Furnace Slag Sand on Fresh Properties of Mortar
  • An Effect on Properties of Hybrid Fibres Bio-Composite: Sustainable on Rural Building Materials
  • Mechanical Properties of 3D-Printed Wood-Plastic Composites
  • Effect of Alkaline Activators to Engineering Properties of Geopolymer-Based Materials Synthesized from Red Mud
  • Evaluation on Roles of Activated Silicon and Aluminum Oxides for Formation of Geopolymer from Red Mud and Silica Fume
  • Leaching Behavior and Immobilization of Heavy Metals in Geopolymer Synthesized from Red Mud and Fly Ash
  • Vibration and Floor Impact Sound Isolation Performance in Bubble Deck Slab
  • Study on the Potential of Fabricated Non-Biodegradable Plastic Waste (N-BPW) Liner as Alternative to Conventional Geomembrane
  • Dynamic Mechanical Behavior of Aluminum Alloy Mortise-and-Tenon T-Joints
  • A Computational Study on Tensioned Fabric Structure in the Form of Richmond's
  • Cross Laminated Timber in the International Context and in Brazil: Most Relevant Aspects
  • Testing and Characterization of Simply Supported Pultruded FRP Angle Beams Using Bending Tests
  • The Effect of High Salinity Water to the Compressive Strength of Mine Backfill Material
  • Investigation of Bearing Characteristics of High-Cap Pile Foundation under Inclined Load
  • Effect of Control Technology on Properties of Quartz Porous Brick
  • Bending Behavior of Simply-Supported Sandwich Beams Subjected to Large Deflection
  • Degree of Conversion of Three Light-Cured Orthodontic Adhesives
  • Cytotoxicity of Three Light-Cured Orthodontic Adhesives
  • Shear Bond Strength of Three Light-Cured Orthodontic Adhesives
  • Influence of Emulsifiers on Physical Properties of Oil/Water Emulsions Containing Ostrich Oil
  • A Novel Electrochemical Sensor for the Simultaneous Determination of Fat-Soluble Vitamins Using a Screen-Printed Graphene/Nafion Electrode
  • Processing and Properties of Biphasic Calcium Phosphates Bioceramics Derived from Biowaste Materials
  • Study on Corrosion Properties of Medical Mg-Zn Alloy
  • Drug Delivery of Adding Mangosteen Seed Oil into Natural Rubber Latex Patch