Engineering and innovative materials VI : selected, peer reviewed papers from the 6th International Conference on Engineering and Innovative Materials (ICEIM 2017), September 3-5, 2017, Tokyo, Japan /
Saved in:
Meeting name: | International Conference on Engineering and Innovative Materials (6th : 2017 : Tokyo, Japan), creator. |
---|---|
Imprint: | Zurich, Switzerland : Trans Tech Publications Ltd, [2018] ©2018 |
Description: | 1 online resource. |
Language: | English |
Series: | Defect and diffusion forum ; volume 382 Diffusion and defect data. Pt. A, Defect and diffusion forum ; v. 382. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/12019330 |
Table of Contents:
- Preparation and Characterization of Composite Membrane Chitosan-Silica-Polyethylene Glycol
- Synthesis and Characterization of Poly(Lactic Acid)-Grafted Natural Rubber by Reactive Melt-Blending Technique
- Effects of Impregnation of Organoclay in the Thermo-Physico-Mechanical Properties of Recycled Composite Aluminates as Barrier Material
- Preparation Polyisoprene (NR) and Polyacrylonitrile Rubber Latex Glove Films by Dipping Ceramic Hand Molds Process and their Properties
- Alternative Methods for Accelerating Mechanical Stability of Concentrated Natural Rubber Latex
- Plasma Surface Modification of Poly(Lactic-co-Ricinoleic Acid)Urethane: Chemical and Biological Characterizations
- Barrier Properties Analysis of Polyethylene Terephthalate Films (PET) Coated with Natural Polyphenolic and Gelatin Mixture (PGM)
- Morphology and Structure of Amino Fatty Acid Intercalated Montmorillonite
- Physical and Mechanical Properties of the Amorphous and Nanocrystalline Alloys
- Magnetic and Mechanical Properties of the Amorphous Alloys
- Ultra-Fine and Nano-Crystalline Structure Induced by Sliding Friction of Carbon Steel
- Mechanical Properties of Ni-Pd Thin Films Fabricated by LIGA Process
- Thermodynamics on the Modification of Inclusions by Ca and Mg Treatment in GCr18Mo Bearing Steel
- Thermodynamics of Aluminum Deoxidization Equilibria in GCr18Mo Bearing-Steel
- Non-Isothermal Crystallization and Viscoelastic Behavior of Polypropylene/Nanoclay Composites Fabricated from Masterbatch by Using a Mini Extruder
- Comparison of Reinforcing Efficiency between Calcium Carbonate/Carbon Black and Calcium Carbonate/Silica Hybrid Filled Natural Rubber Composites
- Effect of Tool Path Parameters on Part Porosity in Fused Filament Fabrication of Poly(Ethylene-co-Trimethylene Terephthalate)
- Extrusion Temperature and Flow Rate Effects on Tensile Properties of Additively Processed Poly(Ethylene-co-Trimethylene Terephthalate)
- Experimental Investigation of Bouncing-Back of Multidirectional CFRP Laminates during Ultrasonic Assisted Edge Trimming
- Friction Stir Forming for Mechanical Interlocking of Ultra-Thin Stainless Steel Strands and Aluminum Alloys
- FEM Analysis of Cold Flaring Process of SUS304 Pipe
- Evaluation of Periodic Wrinkle during Sheet Press Forming Utilizing Frequency Characteristic of Ultrasonic Wave
- Evaluation of Material Deformability and Pressure Distribution on a Die Surface under a Tool in Spot FSF
- Multi-Objective Optimization of EDM Process Parameters by Using Passing Vehicle Search (PVS) Algorithm
- Roll Casting of Al-40%Sn-1%Cu Strip
- Gas Nitriding and Oxidation of Ti-6Al-4V Alloy
- Prevention of Solidification of Al-40%Sn-1%Cu in Melt Pool on the Roll Casting Using Unequal Diameter Twin Roll Caster
- Hydrogen Influence on Microstructure and Properties of Novel Explosive Welded Corrosion Resistant Clad Materials
- The Innovation as a Source of Traditional Products' Survival: The Bobbin Lace from Peniche
- Two-Dimensional Finite Element Analysis for Investigating Stresses Developed in Cement and Bone Layers in Total Knee Replacement
- Application of Coupled Ductile Fracture Criterion to Plane Strain Plates
- Fatigue Failure of a Composite Wind Turbine Blade at the Trailing Edge
- Four-Parameter Viscoelastic Model for the Plates of Uniformly Varying Cross-Section
- A Micro Constitutive Model for Ultra-High Molecular Weight Polyethylene Orthopaedic Implant Bearings
- Eccentricity Effect in the Hole-Drilling Residual Stress Measurement
- Stress Analysis of the Thin Coating of the Trapeziometacarpal Replacement
- Out-of-Plane Deformation Measurement of Soft Solid Using a Stereo Camera System
- Relationship between UPV and Strength of Rubber-Concrete
- Preliminary Study on Reaction of Fresh Concrete with Carbon Dioxide
- Incorporating Waste Material in Road Construction for Sustainable Development
- An Experiment on Bond-Slip Behavior of Epoxy Coated Rebar Made by IGBT Method
- Durability of Cement Based Mortars Containing Crystalline Additives
- Influence of a Crystalline Additive on the Porosity of Cement Mortars
- The Bearing Capacity of the Pre-Compressed Concrete Filled Steel Tube Columns
- Study of the Effect of Waste Materials on Soil Properties
- Non-Isothermal Combustion Properties of Plant Biomaterial Using TG-DSC Technique
- Application of Coconut-Shell Activated Carbon as Heterogeneous Solid Catalyst for Biodiesel Synthesis
- Bio-Synthesis of Eicosapentaenoic Acid (EPA) from Palm Oil Mill Effluent Using Anaerobic Process
- Potential of Agro Waste-Derived Adsorbent Material for Colour Removal
- Micro-Peat as a Potential Low-Cost Adsorbent Material for COD and NH3-N Removal
- Development of Natural Fiber as a Filter Media in Removing Organic Pollutants from Greywater
- Adsorption of Congo Red Dye on HDTMA Surfactant-Modified Zeolite A Synthesized from Fly Ash
- Oxidation of Palm Shell Coal Using HNO3/H3PO4-NaNO2 System for Adsorbents
- Studies on Physical and Mechanical Properties by Soda-AQ Pulping of Napier Grass
- Characterizing Defects Induced by Irradiation Damage in 6H-SiC
- A Novel Charged Iridium Polymer for Polymer Light Emitting Diode
- A New Functional Material of Immobilized Ionic Liquid on Cotton Cellulose
- Characteristics on Physical-Chemical-Thermal Properties of Eggshell Membrane for Biomaterial Applications
- Use of Thiols to Enhance the Hydrophobicity of Silver Nanoprisms
- The Utilization of Ground Tire Rubber as Ion Exchange Materials
- A Varied Alkyl Chains of Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)
- Synthesis and Electrical Conductivity of N-(3-(Trifluoromethyl)Benzylidine)Thiosemicarbazide towards Dyes Sensitized Solar Cell
- Thiocyanate Free Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)
- Experimental Studies of Fire from CIGS Thin Film Solar Module Back