Materials Science and Technology IX : MSAT-9 : selected, peer reviewed papers from the 9th International Conference on Materials Science and Technology (MSAT-9), December 14-15, 2016, Bangkok, Thailand /
Saved in:
Meeting name: | International Conference on Materials Science and Technology (9th : 2016 : Bangkok, Thailand) |
---|---|
Imprint: | Zurich, Switzerland : Trans Tech Publications, Ltd., 2017. |
Description: | 1 online resource : illustrations |
Language: | English |
Series: | Key engineering materials ; 751 Key engineering materials ; 751. |
Subject: | Materials science -- Research. Technology. TECHNOLOGY & ENGINEERING -- Engineering (General) TECHNOLOGY & ENGINEERING -- Reference. Materials science -- Research. Technology. Electronic books. Electronic books. |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11911747 |
Table of Contents:
- The Thermal-Aging Effect on the Microstructure Evolution and Shear Strength of the Sn-Rich Au-Sn Soldering between Altic and Si Substrate in Microelectronics
- Effect of Cooling Rate on the Microstructural and Mechanical Properties of Sn-0.3Ag-0.7Cu-0.05Ni Solder Alloy
- Effect of Si Content on Mechanical Properties of Ti-Si-N Ternary Alloys Prepared by Spark Plasma Sintering
- Properties of Sintered Bronze-Graphite Containing Natural Anhydrite
- Properties of Sintered Bronze-Graphite Containing Calcium Sulfate Derived from Waste Plaster Molds
- The Effect of Bottom Ash Additions on the Properties of Sintered Bronze-Graphite Composites
- Effect of Compaction Pressure and Sintering Time on the Properties of Sintered Cu-10Sn Bronze
- Modification of Microstructure and Tensile Property of Sintered Fe-Cr-Mo-C Steel by Nickel Addition
- Microstructure, Hardness and Wear Properties of Sintered Fe-Mo-Si-C Steels with Spheroidal Graphite Iron/Compacted Graphite Iron-Like
- Effect of Aluminum Addition on AlxCoFeMnNiZn Multi-Component Production
- Mechanical Properties of As-Exposed Al-SiCp Composite Fabricated by Powder Injection Moulding
- Hardfacing of 3.5% Chromium Cast Steel by Flux Cored Wire Arc Welding Process
- Effect of Impingement Angle on Erosion Resistance of HVOF Sprayed WC-10Co-4Cr Coating on CA6NM Steel
- Structural Characterization of Reactive DC Magnetron Co-Sputtered Nanocrystalline CrAlN Thin Film
- Solid Particle Erosion Resistance of Thermal Sprayed Nickel Alloy Coating
- Sintered Metal Microstructure Influenced by Deep Rolling and Carburizing Processes
- Corrosion Behavior of Al-Zn-In Sacrificial Anode Alloys Produced by Conventional Casting and Semi-Solid Metal Casting Processes
- Development of Pitting Corrosion Monitoring Device under Sodium Chloride Droplet by Means of Wet-Dry Cyclic Method
- Improvement of Structural, Morphological and Mechanical Properties of CrNx Sputtered Thin Films by Vacuum Annealing Process
- Study of Microstructure and Corrosion Resistance of Zinc Electrodeposits before and after Black Chromating
- Factors Affecting on the Corrosion Resistance of Electroless Ni-Zn-P Coated Steel
- Effect of Post-Curing Temperature and Mechanical Surface Treatment on Shear-Bond Strength of Asbestos-Free Brake Pad
- Effects of Air Exposure Time and Annealing Temperature on Superhydrophobic Surface of Titanium Dioxide Films
- Meta-Heuristics for Engineering Optimisation - Applications to Metal Forming Processes
- Development of a Regression Model of Stk50Eu for a Hydrocyclone
- Development and Characterizations of a Projection Stereolithography
- Formability Analysis of Fukui Stretch-Drawing and Square Cup Drawing Using Strain and Stress Based Forming Limit Curves
- Effect of Feed-Flow Rate in a Solid-Liquid Hydrocyclone Based on Total Solid Recovery Equation
- Bending Limit Curves in Sheet Metal Bending Evaluation
- Fastenerless-Riveting Utilizing Friction Stir Forming for Dissimilar Materials Joining
- X-Ray Diffraction Analysis of ZnO Particles Prepared by Microwave Plasma
- Influence of Scanning Parameters on X-Ray Diffraction Peaks of Copper
- The Investigation of Ultrasonic Energy Attenuation in AISI 316 Stainless Steel Weld Joint
- Stress Measurement in Carbon Steel by Magnetic Barkhausen Noise Technique
- Influence of Molecular Weight on the Non-Isothermal Melt Crystallization of Biodegradable Poly(D-Lactide)
- Gelatin Films and its Pregelatinized Starch Blends: Effect of Plasticizers
- Medicated Pressure Sensitive Adhesive Patches from STR-5L Block Rubber: Effect of Preparation Process
- Effect of Calcium Carbonate on Crystallization Behavior and Morphology of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)
- Simulation of Irradiation-Based Processing System for Natural Rubber Vulcanization
- The Smart Blending for Multilayer Structure of PLA/EVOH
- Morphology and Properties of Polyoxymethylene/Polypropylene/Microcrystalline Cellulose Composites
- Effect of Synthesized Ag Nanoparticles by Using the Different Amounts of Polyvinylpyrrolidone for Ag-Natural Rubber Hybrid Sheets and their Antibacterial Properties
- Physical and Mechanical Properties of Wood Plastic Composites from Teak Wood Sawdust and High Density Polyethylene (HDPE)
- Effect of Poly(D-Lactic Acid)-co-Polyethylene Glycol on the Crystallization of Poly(L-Lactic Acid)
- Effect of Octenyl Succinate Starch on Properties of Tapioca Thermoplastic Starch Blends
- Preparation of TiO2/WO3 Composite Nanofibers by Electrospinning
- Effect of Poly(Hexamethylene Succinamide) on Crystallization of Poly(L-Lactic Acid)
- Mechanical Behavior of Polystyrene-Grafted Natural Rubber/Natural Rubber Blend: Effect of Polystyrene Grafting Percentage
- Degradation of Silica-Reinforced Natural Rubber by UV Radiation and Humidity in Soil
- Degradation Test of Natural Rubber/Chitosan Composite
- Low Haze and Antifog Performance of 2-Layer Poly(Lactic Acid) Based Films
- Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates
- Mechanical and Thermal Properties of PLA Melt Blended with High Molecular Weight PEG Modified with Peroxide and Organo-Clay
- Poly(Lactic Acid)-Polybutylene Succinate-Activated Carbon Composite Foams
- Development of Water Assisted Solid State Reaction for the Ceramic Materials
- Slip Degassing to Improve the Properties of Slip Cast and Reaction Bonded Si3N4
- Fabrication of Low Cost Membrane from Anodic Aluminum Oxide
- Synthesis of Nanocrystalline Cobalt Ferrite by the Sonochemical Method in Highly Basic Aqueous Solution
- The Effect of Zirconium Oxide on Properties and Crystallization of Soda-Lime Silicate Glass
- Structure, Magnetic Property and Energy Band Gap of Fe-Doped NiO Nanoparticles Prepared by Co-Precipitation Method
- Piezoelectric and Ferroelectric Properties of KNbO3 Added Bi0.5Na0.5TiO3 Ceramics
- Chemical Composition-Microstructure-Dielectric Constant Relations of Mg-Doped Calcium Titanate Synthesized by Solid State Reaction Technique
- Development of Glass-Ceramics from Soda Lime Silica Glass Waste by Direct Sintering Method for Opal Imitation
- Effects of Aluminium Contents and Consolidation Techniques on Chemical Composition, Microstructure and Dielectric Properties of Strontium Titanate
- Influence of Temperature and Alkaline Activation for Synthesis Zeolite A from Natural Kaolin
- Effects of Ball Milling on the Properties of (Ba1-xCax)(Ti0.92Sn0.08)O3 Lead-Free Ceramics
- r-GO/MWCNTs Nanocomposite Film as Electrode Material for Supercapacitor
- Pre-Immobilization of Anaerobic Mixed Culture on Electrode of the Upflow Bio-Filter Circuit Microbial Fuel Cell
- The Study of Crystallization of Polyfluorene and Fullerene Derivatives in Semiconducting Layer of Organic Solar Cells
- Two-Stage Combustion Burner Using Used Engine Oil as Fuel
- Pelletization of Iron Oxide Based Sorbents for Hydrogen Sulfide Removal
- BaO-Al2O3-SiO2-B2O3 Glass-Ceramic SOFCs Sealant: Effect of ZnO Additive
- Microwave-Assisted Preparation of Sodium Silicate as Biodiesel Catalyst from Rice Husk Ash
- Characterisation of NiO-YSZ Porous Anode-Support for Solid Oxide Fuel Cells Fabricated by Ceramic Injection Moulding
- Process Optimization and Characterization of YSZ Thin Film Electrolyte on Anode Substrate Prepared by Electrophoretic Deposition Technique
- The Effect of Calcium-Based Salt on Hydrothermal Carbonization of Corncob
- Influence of Bi2O3 on Crystalline Phase Content and Thermal Properties of A#778;kermanite and Diopside Based Glass-Ceramic Sealant for SOFCs
- Synthesis of Ternary Semiconductor Silver Bismuth Telluride by Chemical Bath Deposition
- Zeolite Supported Bimetallic Catalyst System: The Effect of Metal Loading for Catalytic Pyrolysis of Jatropha Residue
- Charged Iridium(III) Complexes with Varied Side Chain Length in Organic Light Emitting Diodes
- Effects of Buffer Layer Growth Temperature on Micro-Structures in the Cubic GaN Films Grown on GaAs (001) Substrates by MOVPE
- Effect of Silica Base Catalyst on Transformation of Methanol to Hydrocarbon
- Investigation of Physical, Mechanical and Thermal Properties of Building Wall Materials
- Geopolymerization as Cold-Consolidation Techniques for Hazardous and Non-Hazardous Wastes
- Influence of Portland Cement on Physical, Mechanical and Thermal Properties of Cellular Lightweight Concrete
- The Study on Physical and Thermal Properties of Geopolymer Pastes
- Optimum Partial Replacement of Cement by Nanosilica, Microsilica and Rice Husk Ash for Mass Production of Concrete
- Effect of Calcium Carbonate on Compressive Strength and Physical Properties of Alkali-Activated Lightweight Concrete
- Use of Waste Glass as a Reinforce Material in Calcined-Kaolin Based Geopolymer
- Effects of Aluminum Concentrations on Microstructure and Compressive Strength of Porous Concrete
- The Mechanical Properties Study of Waste Bakelite Aggregate Concrete
- In Vivo Testing of Sericin-Polyurethane Nanofiber Mats for Wound Healing in Rats
- Fluoride Recharge Ability of Resin-Based Pit and Fissure Sealant with Synthesized Mesoporous Silica Filler
- Comparison of the Release of Aloe vera Extracts from Poly(Vinyl Alcohol) Electrospun Fibers and Hydrogel Films for Wound Healing Applications
- Effect of Process Parameters on Biomimetic Deposition of Calcium Phosphate on 3D Printed Hydroxyapatite
- A Preliminary Study of the In Vitro Biocompatibility Testing of Silk Fibroin/Alpha Tricalcium Phosphate Composite Scaffolds for Bone Tissue Engineering
- Effect of M-Type Hexaferrites on Mechanical and Magnetic Properties of Hydroxyapatite Ceramics
- Synthesis and Characterization of Cerium- and Lanthanum Containing Bioactive Glass
- Effect of Solids Loadings, Sintering Temperatures and Sintering Periods on Microstructure of Hydroxyapatite
- Effect of Bleaching on Color Change of Stained Resin Composites
- PMMA Demonstrated Higher Elastic Modulus and Nanohardness Compared with Polyamide Denture Base Materials
- Flexural Strength and Cytotoxicity of ZCC, a Resin Modified Zinc-Calcium Liner Prototype
- The Effect of Thermoforming on Tear Strength of Ethylene Vinyl Acetate Mouthguard Material in Various Thicknesses
- The Use of Three Dimensional Printed Hydroxyapatite Granules in Alveolar Ridge Preservation
- Preparation of Activated Carbon from Sugarcane Bagasse Waste for the Adsorption Equilibrium and Kinetics of Basic Dye
- Modified Soil Compositions for Removal of Acetaminophen from Wastewater
- Determination of Tannin in Coffee Pulp Using Experimental and Theoritical Approches
- Exploitation of Ag3PO4 Impregnated Alginate Beads for the Photocatalytic Degradation of Dye Solution under Sunlight Irradiation
- Development of Specific Surface Area in Carbon Material Prepared from Cassava Tuber Char Using a Chemical Activation Assisted Sonochemical Process
- Performance Photocatalytic Degradation of Methomyl onto Composite Graphene Oxide/Bismuth Vanadate (GO/BiVO4) Nanoparticle
- The Photocatalytic Degradation of Methylene Blue Using Bismuth Vanadate (Bi2VO5.5) Powder
- Adsorption of Reactive Dyes Red 195, Blue 222, and Yellow 145 in Solution with Polyaniline-Chitosan Membrane Using Batch Reactor
- Adsorption of Reactive Dye (RB 222) in Solution onto Chitosan-Rice Husk Ash Composite Beads Cross-Linked with Glutaraldehyde
- On the Application of Electrocoagulation/Flotation (ECF) Technique for Cationic Dye Removals Using Aluminium Electrode and Sodium Dodecyl Sulfate (SDS)
- Fabrication Study of Hydrophobic Polyurethane Sponge for Oil Absorption Application
- Preparation, Characterization and Photocatalytic Properties of Rubber-TiO2-rGO Composite Sheets for Dye Decomposition in Wastewater
- The Effect of Carboxymethyl Cellulose from Various Agriculture Wastes on the Viscosity and Physical Properties of Low Concentration Solution of Surfactant
- Adsorptive Properties of Fly Ash Zeolite Synthesized via Microwave and Ultrasonic Pretreatments
- Using ZnO Nanorods Coated Porous Ceramic Monolith to Remove Arsenic from Groundwater
- Removal of Arsenic from Groundwater Using Nano-Metal Oxide Adsorbents
- Synthesis of Carbon Nanoparticles from Used Motor Oil and Benzene via Solution Plasma Process
- Development of Oil Palm Empty Fruit Bunch Fiber Reinforced Epoxy Composites for Bumper Beam in Automobile
- Improvement of Compressive Strength of Soil by Using Jute Fiber Waste
- Assessment of Hydrophilic Biochar Effect on Sandy Soil Water Retention
- Photo-Oxidative Degradation Polyethylene Containing Titanium Dioxide and Poly(Ethylene Oxide)
- Photocatalytic Activity of Cu-Doped Cerium Dioxide Nanoparticles
- Synthesis and Photocatalytic Activity of Visible-Light Responsive BiOBr/GO Composites
- Comparison Study of Photocatalytic Activity of Titanium-Rich Materials Derived from Natural Minerals Ores Using Acidic Leaching
- Photocatalytic Degradation Study of Titania Sol-Gel Coated on Commercial Unglazed Ceramic Tiles
- Photocatalytic Comparative Study of TiO2, ZnO, Ag-G-ZnO and Ag-G-TiO2 Nanocomposite Films