Research in area of materials science : selected, peer reviewed papers from the Asia-Pacific Materials Science and Information Technology Conference (APMSIT 2014), December 13-14, 2014, Shanghai, China /
Saved in:
| Meeting name: | Asia-Pacific Materials Science and Information Technology Conference (2014 : Shanghai, China) |
|---|---|
| Imprint: | Pfaffikon, Switzerland : Trans Tech Publications, 2015. ©2015 |
| Description: | 1 online resource (593 pages) : illustrations (some color) |
| Language: | English |
| Series: | Advanced Materials Research, 1662-8985 ; Volume 1009 Advanced materials research ; Volume 1009. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11907784 |
Table of Contents:
- The Formaldehyde Removal by Commercial Activated Carbons at Room Temperature
- The Filtering Properties Research of Healthy Antibacterial Anti-Fog Silk Mask Fabrics
- Research on the Energy Conservation and Emission Reduction Technologies in First Washing Wastewater
- Research and Implementation of the Automatic Detection System of Aggregate Particles Characteristic Parameters Based on VC
- Microstructural Characterization of 3C-SiC Layers, Grown Epitaxially on 4H-SiC Substrates by CVD
- Research on Metallographic Structures for Low-Alloy Steel after Fire Damage
- Hybrid Plasmonics Waveguide Properties of Dielectric Nanowires Coupling with Metal Substrate
- Influence of Liner Material on Formation of Multiple Explosively Formed Projectiles Warhead Parameters
- ArF Excimer Laser Assisted Solution Based Metal Induced Crystallization of Amorphous Silicon Films
- Research of Mixed BTSPA and VTAS Silane Films Applied on the Steel
- Research of Structural and Optical Properties of MgZnO Films Annealed at Different Oxygen Partial Pressures
- Annealing Time Influence on Optical Characteristic of Beta-FeSi2 Thin Film
- Analysis of the Mechanical Behavior of Gravure Inks: Comparing Experiment and Numerical Methods
- Influence of Annealing Temperature on the Properties of Zn-Sb Composite Thin Films by Magnetron Sputtering
- Research on the Screening of Degrading Fungi for Poly (vinyl alcohol) Film and the Effect of Additives
- Hydrophilicity and Self-Cleaning Property of Kroy-Processed Wool Fabric Coated with TiO2/SiO2 Composite Hydrosol Stabilized by BTCA
- Homogenous Thin Films Prepared on Microchannel Plates via Atomic Layer Deposition
- Simulation and Analysis of Light Scattering by Air Bubble in Optical Glass
- Evaluation on Adhesion Strength of Laser Induction Hybrid Rapid Cladding Cu-Fe-Based Coatings Using Scanning Kelvin Probe
- First-Principles Calculation of Al-Cu-Mg Alloy Strengthening Phase
- Nickel Release Rate of Type 303 Free Cutting Austenitic Stainless Steel
- 3D Analysis and Nano-Indentation Mechanical Characterization of a Commercial Zr44-Ti11-Cu10-Ni10-Be25 Metal Glassy Alloy
- Erosion-Corrosion of Carbon Steel and Alloys in Ammonium Hydrosulfide Solutions
- Friction and Wear Behaviors of GCr15 Steel under Dry Friction and Grease Lubrication
- Corrosion Protection Behavior of #947;-APS Films on Low Carbon Steel
- Synthesis, Crystal Structure and Optical Properties of Silver Complex with 2-Amino-4-Methylthiazole
- Synthesis and Characterization of Alkyl-Substituted Polyaniline by Using Ammonium Persulfate as both Oxidant and Dopant
- Preparation of Barium Aluminate with BaCO3 and Al(OH)3
- Cu-Ni Nanocatalysts in Mesoporous MCM-41 and TiO2 to Produce Hydrogen for Fuel Cells via Steam Reforming Reactions
- Pathogen Identification and Fungicides Screening of Kushui Rose Leaf Spot Disease
- Synthesis of ZSM-5 Zeolite without Organic Template
- Research on Plasticizing Properties and Mechanism of PVA
- Adsorption Simulation of Basic Nitrogen Compounds in ZSM-5 and USY Zeolites by Grand Canonical Monte Carlo Method
- Structure and Characterization of Strong Acid Cationic Exchange Fiber
- Synthesis, Characterization, and Properties of POSS-Epoxy
- Synthesis and Characterization of a New Fluorine-Containing Ultraviolet Light Absorber Based on BTA
- The Utilization of Phenol Components in Bio-Oil for Modifying Urea-Formaldehyde Resin Adhesive
- The Properties of Polyetheretherketone Biocomposite Reinforced by Surface-Modified Nano-Hydroxyapatite
- Improved Stabilities of Lipase by Immobilization on Eupergit C
- A Review of PGLA Model of Medical Materials in Clinical Catgut Embedding Application
- The Structure and Stability of C20 Dimer
- Heat Transfer Model of Larch Bark Particles Pyrolysis
- The Research on Adsorption of MB by SPES Microspheres and SPES Microspheres Wrapping Titanium Dioxide
- Study of Errors on Larch Wood Pyrolysis Kinetic Analysis
- Effect of MgO and Ag2O Mix-Additions on the Formation and Superconducting Properties of Bi-2223 Phase
- Mechanism of the Indium by Carbothermic Reduction Reaction from Indium Ore in Vacuum
- In Depth Analysis on the Excitation Spectrum of SrS: Eu2+, Dy3+
- Numerical Analysis of Semi-Solid Die-Casting Automobile Part Based on the Thermo-Visco-Plastic Constitutive Relation
- Research on the Dark Fiber Causes and Variety of the Acidic Fiber Imaging Bundle
- A Modified Monte-Carlo Potts Model for Dynamic Recrystallization
- Analysis and Explanation of Agglomeration Phenomenon Based on Raman Spectrum
- Application of Ant Colony Algorithm in Optimal Preform Design of Forging Process
- SPH Analysis for Transient Thermal Stress of FGMs with Temperature-Dependent Properties
- Experimental Study on Aging Characteristics of Liquid Silicone Rubber Sheds for Composite Bushing
- The Influence of Doping Both NiO and CoO on the Properties of Low-Loss and High Bs MnZn Ferrites
- A Novel Modified Paris' Law Based Evaluation of Fatigue Crack Propagation of LD2 under Combination of Corrosion and Cyclic Loadings
- Effect of Heat Treatment on Microstructures and Mechanical Properties of A356 Alloy by Low Pressure Casting
- Supercapacitive Performance of Mesoporous Carbon Materials Co-Templated by F127 and PDMS-PEO
- #960;-Lithium Noncovalent Interaction between #960;-Bond-Containing Compounds and NH2Li: A way of Construction for Supramolecular Materials
- Synthesis and Preparation of Eu(BA)3Phen and its Fluorescent Falsification-Resistant Screen Printing Ink
- Effect of Cutting Speed during Turning of Low Carbon Steel on Mechanical Properties and Surface Roughness
- Forming Compound Parts of Metal / Plastics by Rolling-Extrusion
- Quantitative Calculation of Polynuclear Aluminum Content in the Forced Hydrolysis-Polymerization Course of Aluminum (III) Salt Solutions
- A Method for Preparing Sample Used in Evaluating Adhesion Performance of Hot Melt Adhesives in Textiles
- Colossal Permittivity Observed in Yttrium Doped BaTiO3
- The Application of Moldflow in Injection Molding of the Helmet
- Spontaneous Deposition of Bonelike Apatite Layer on Bioactively H2O2-Treated Titanium Substrate
- Analysis and Optimization on Injection Molding Process of Double Helical Gear Based on Moldflow
- Effect of Accurate Dimension Part during Transfer Die Technology
- Influence of Slag on Water Resistance of Magnesia Phosphate Cement
- Organic Light Emitting Properties of the Functional Pyridine-Containing Diacylhydrazones
- Pervaporation Separation of Cyclopentadiene/Methylcyclopentadiene Mixtures from Cracking C5 Fractions Using Polyimide Membranes
- The Treatment of Waste Metal Cutting Fluid by Extraction and Adsorption Process
- Computational Study of the Decomposition of Cyclotetramethylenetetranitramine under Impact, Friction, and Electric Fields
- The Changes of Thickness and Tearing Behavior of Tencel Fabrics Treated with Different Time by Plasma
- The Numerical Simulation of Effective Elastic Response for WC-Co Cemented Carbide
- The Effect of KMnO4 Concentration on the Catalytic Activity of MnOx/Luffa Sponge Composites
- Flame Retardation of Banana Fiber Reinforced Epoxy Composites Using Melamine Pyrophosphate and Pentaerythritol as Intumescent Flame Retardants
- Fabrication and Characterization of Aramid/Aerogel Composite
- Preparation and Structure of Amino-Modified Multi-Walled Carbon Nanotubes
- Performance and Morphology of PVDF/PEG-POSS Hybrid Membrane
- Study on the Mechanical Properties of Cement-Based Composites Were Reinforced through the Jute Fibers at Different Content
- Preparation, Damping and Thermal Properties of Castor Oil-Based Polyurethane/Poly(Methyl Methacrylate-Butyl Methacrylate-Styrene) Grafted Interpenetrating Polymer Networks
- Isothermal Crystallization Behavior of PLA/PIL Composites
- Preparation and Separation Properties of Oleyl Alcohol-Modified PDMS Membranes
- Synthesis of N749 Dimer and its Application in Dye-Sensitized Solar Cells
- A New SERS Substrate Based on TiO2 Nanorods Thin Film Assembled Gold Nanoparticles
- Synthesis and Luminescence Property of Sr3Al2O6:Eu3+ Red Phosph or Prepared by Co-Precipitation Technique
- Electrochromic Porperties of Fluorescent Dye Doped Poly(3,4-ethylenedioxythiophene) with Different Polymerization Times
- A Novel PNIN Barrier Controlled Tunnel FET
- The New Study Based on a Dual Ion Implantation PSD Structure
- Mesoporous CexZr1-xO2 Mixed Oxides Supported Cr-V-O Nanocatalysts for Dehydrogenation of Propane to Propene
- A 600V-Class Partial SOI LDMOS with Step-Doped Drift Region
- Molecular Dynamic Study on Thermal Conductivity of Methyl-Chemisorption Carbon Nanotubes
- Reduction Kinetics of Nano-Sized Nickel Ferrite for the Production of Metallic Alloys
- Application of Phase Change Materials in Buildings
- Experimental Study of Factors on the Conductive Properties of Carbon Fiber Reinforced Concrete
- Study on Mix Proportion of C80 High-Strength Tri-Admixture Concrete
- Time-Dependent Finite Element Analysis of Prestressed Concrete Beams
- Effect of Loading Rate on the Properties of Asphalt Concrete Using Three-Point Bending Test
- Stochastic Filtering Back Analysis of Elastic Modulus of Box Shaped Beam
- Analysis of Fatigue Mechanical Behaviors of Welding Conformations in Orthotropic Steel Bridge Deck
- Dynamic Behavior of T Thin-Wall Steel Member Subjected to Lateral Explosive Loading
- Effect of Random Inclusion of Palm Fibers on Strength Characteristics of Shanghai Cohesive Soil