Symposium on Materials Science and Engineering : ISMSE 2017 : selected, peer reviewed papers from the 2017 International Symposium on Material Science and Engineering (ISMSE 2017), January 13-15, 2017, Kuala Lumpur, Malaysia /
Saved in:
| Meeting name: | International Symposium on Material Science and Engineering (2017 : Kuala Lumpur) |
|---|---|
| Imprint: | Zurich, Switzerland : Trans Tech publications, [2017] ©2017 |
| Description: | 1 online resource : illustrations. |
| Language: | English |
| Series: | Key engineering materials ; volume 744 Key engineering materials ; v. 744. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11677511 |
Table of Contents:
- Mechanical Properties of Hybrid Basalt-Polyvinyl Alcohol (PVA) Fiber Reinforced Concrete
- Influence of Metakaolin, Fly Ash and Nano Silica on Mechanical and Durability Properties of Concrete
- Mechanical Behavior of Stabilizing Materials Using Silicate Mineral Powder
- A Study on the Optimum Material Mix Design for Vegetation Shotcrete Using Mineral Additive
- Research of Thermal Stability and Fire-Resistance Properties of the Composite Material "Water Glass-Graphite Microparticles"
- Discussion of Mix Proportions of Concrete for Long-Distance Pumping
- Study on Microstructure of Long-Age Concrete with HCSA Expansive Agent
- Simulation of Mechanical Properties of Light-Burned Magnesium Oxide-Containing Concrete for Historical Dam Temperatures
- Cracking Tendency of Self-Compacting Concrete Containing Crumb Rubber as Fine Aggregate
- Investigation of Deformation of Rock Samples
- Acoustic Properties of Cork Sheets
- Effect of Curing Pressure on Compression and Consolidation Behaviors of Cement Admixed Clay
- The Reinforcement of Graphene Produced by Kitchen Blender in Cement Mortar
- Determining Method for Mixing and Compaction Temperature of Modified Asphalt Mixture
- Effects of Curing Time on Micro Properties of High-Volume Fly Ash Concrete with HCSA Expansive Agent
- Detection of Crack Evolution in Plain Concrete by Electronic Speckle Pattern Interferometry
- Pavement Evaluation for ERS Steel Deck Pavement Using Accelerated Loading Test
- Effect of Type of Cement and Expansive Agent on the Hardening of Steam-Cured Concrete
- Evaluation on the Addition of Inhibitor and Surface Treatment to Corrosion Behavior of the Reinforced Steel Bar Embedded in Mortar Specimen
- Effect of Charcoal Ash Coconut Shell from Waste Material at Different Size on the Physical Properties of Bitumen
- Influence of Hydrothermal Nanosilica on Mechanical Properties of Plain Concrete
- Effect of Partial Replacement of Fly Ash by Metakaolin on Strength Development of Fly Ash Based Geopolymer Mortar
- Validation of the Splitting Tensile Strength Formula for Concrete Containing Blast Furnace Slag
- Predicting Compressive Strength of Sustainable Self-Consolidating Concrete Using Random Forest
- Experiments and Optimization of Mix Proportions for Cement Paste Backfill Materials with Extra-Fine Unclassified Tailings
- Numerical Study of Fracture Process on Full-Scale Concrete Foundations by Means of Controlled Blast Method Utilizing Galvanized Steel Charge Holders
- Transient Analysis on Reflective Crack of Highway Semi-Rigid Pavement Caused by Temperature Change
- Research on Similar Materials for Rheological Test of Hard Rock Mass
- Simulation Analysis of Chemically Bonded Anchors in ABAQUS
- Materials Structure Temperature Fissure Analysis of Reinforced Concrete Structure
- Mix Design Method of the SMC Cold Temperature Modified Asphalt Mixture
- Study and Application on Cold Blended Epoxy Asphalt Mixture for Steel Bridge Deck Pavement
- Concrete as a Sustainable Construction Material
- Thermal Performance Optimization of Shape Stabilized Phase Change Material Used in Building Envelopes
- Evaluation of Field Applicability of Cast-in-Place Piles Using Surfactant Grout
- Corrosion Behaviors for Galvanizing, Galvalume and Chromate Treated Steels in 1% NaOH Solution
- Influence of Nanosecond Laser Processing Parameters on the Titanium Alloy Surfaces Colorization
- Mechanical Clinching of Titanium and Aluminum-Lithium Sheet Materials
- Impact of Weld Locations of TWBs of Different Thickness Ratios on Dissimilar Steels on its Bulging Formability
- Optimization of Co-Injection Desulfurization of Vanadium Bearing Hot Metal
- Laser Direct-Part Marking of Data Matrix Barcodes on the Surface of Metal Alloy Material
- Evaluation on the Mechanical and Corrosion Resistance of ALDC 12 Al Alloy by Three Types of Heat Treatments
- Evaluation of Uniaxial Tensile Behavior under Pulsed Current for Electrically Assisted Warm Forming of Light Weight Alloys
- Fatigue Life Evaluation of Weld Surfacing LB 52 Grade
- Preliminary Study of Testing Specimen Thickness Effect on Fracture Toughness for X70 Steel
- Research on Laser-Hybrid Cladding of Ni-Cr Alloy on Copper
- Composite Sandwich with Aluminum Foam Core and Adhesive Bonded Carbon Fiber Reinforced Thermoplastic Cover Layer
- Characterization of Snap-On Calf Nipple Product and Development of its Compound Formulation Based on Natural Rubber
- An Amended 8-Chain Model for Rubber-Like Materials
- Effect of Oleic Acid on Properties of Natural Rubber Filled Bacterial Cellulose
- Influence of Accelerator/Sulfur Ratio on Mechanical Properties and Thermal Resistance of Natural Rubber Containing Hybrid Fillers
- Comparative Analysis of Crashworthiness Capability of Laminate Tubes Structure with 0° Plies of Unidirectinally Arrayed Chopped Strand
- High-Performance Fiber Reinforced Polymer/Metal-Hybrids for Structural Lightweight Design
- Cutting Deformation Mechanisms of Square Aluminium/CFRP Tubes
- Combined Injection Molding Technology for Dynamically Stressed Multi-Material Coupling Elements
- Burr Height as Quality Indicator in Single Shot Drilling of Stacked CFRP/Aluminium Composite
- Structural Health Monitoring System of Composite Beams with Surface Bonded and Embedded Fibre Bragg Grating Sensors
- New Application of Chitosan Film as a Water Vapor Cell
- Film Elasticity and Film Stabilization in Firefighting Foam Stabilized by Solid Particles
- Features of Polarization Processes in Thin Films Poly(Diphenylene Phthalide)
- Manganese Oxide/Single-Walls Carbon Nanotubes Electrodeposited Films for Supercapacitors
- Fabrication of Chitosan-Polyethylene Oxide Polymeric Thin Film Using Electrochemical Deposition for Detection of Volatile Organic Compounds
- Effect of Alkali Treatment on the Mechanical Property of Polyimide Film
- Preparation of Alumina Hollow Fiber Membrane with Controlled Pore Structure for Contactor Process
- Study on Surface Tension of Membrane Made in Cellulose Diacetate
- Study on Corrosion Process of Al-Mg Coatings Based on Electrochemical Impedance Spectroscopy
- Hardness and Structural Properties of Yb3+ Doped B2O3-ZnO-TiO2 Glasses
- Synthesis and X-Ray Analysis of Complex Ferrites
- Preparation of La0.7Sr0.3Co0.2Fe0.8O3-#948; (LSCF 7328) by Combination of Mechanochemical and Solid State Reaction
- Centrifugal Processing on Aspheric Mirror Blank of Optical Glass Material
- Internal Features of Glass Filled Ruby Samples Probed by EPMA
- Properties of Na0.5Bi0.5TiO3-SrTiO3 Ferroelectric Thin Films Prepared by a Modified MOSD Process
- Design and Simulation of Top Illuminated InGaAs PIN Photodetector for Millimeter-Wave Applications
- A Low Pass Filter Based on Spoof Surface Plasma Polaritons
- Facile Formation of Interconnected Multi-Walled Carbon Nanotube-Graphene Nanocomposite for Nanoelectronics Applications
- Synthesis and Physico-Chemical Properties of Zinc Layered Hydroxide-3-4-Dichlorohenoxy Acetic Acid (ZLH34D) Nanocomposite
- Dominant Formation of the Carbon Nanocoils at Low Temperature
- Preparation and Properties of Cupper and Iron Doped TiO2 Nanotubes by Anodization Method
- Preparation of High-Quality Graphene by Sodium Borohydride Reducing Stage-1 FeCl3-GIC via In Situ Hydrogen Exfoliation
- Development of Transparent Electrodes Using Graphene Nano-Ink and Post-Consumer PET Bottles for Electrochromic Application
- Studying the Temperature Effect on the Magnetic Behavior of Fe3O4 Water Based Ferrofluid
- Preparation and Characterization of a Novel Rice Paste for Bone Hemostatic Biomaterial
- In Vivo Clinical Trial of Porous Starch-Hydroxyapatite Composite Biomaterials for Bone Regeneration
- Characterization of Hydroxyapatite from Chicken Bone via Precipitation
- Supercritical Hydrothermal Synthesis of Ultra-Fine Copper Particles Using Different Precursors
- Synthesis and Performance Study of the Nanomaterial Used to Stabilize the Reversible Invert Emulsion Drilling Fluid
- Preparation of KI-Impregnated Razor Clam Shell as a Catalyst and its Application in Biodiesel Production from Jatropha curcas Oil
- Study on Palm Oil and Treated Waste Vegetable Oil Impregnated Paper
- Treatment of V2O5/TiO2 by Non-Thermal Plasma: Changes in Surface Characters and Mercury Oxidation Activity
- Improving the Sweeping Efficiency of Amendment by Using Polymer
- The Combination of Na2EDTA and Reducing Organic Acid on Remediation of Soil Contaminated by Heavy Metals
- Research on Foam's Carrying Capacity of Two Types of nZVI
- Microalgae Biomass Recovery Grown in Wet Market Wastewater via Flocculation Method Using Moringa oleifera
- Experimental Assessment on Effects of Growth Rates Microalgae Scenedesmus sp. in Different Conditions of pH, Temperature, Light Intensity and Photoperiod