Material science and engineering technology V : selected, peer reviewed papers from the 5th International Conference on Material Science and Engineering Technology (5th ICMSET), October 29-31, 2016, University of Tokyo, Japan /
Saved in:
Meeting name: | International Conference on Material Science and Engineering Technology (5th : 2016 : Tokyo, Japan) creator. |
---|---|
Imprint: | Zurich, Switzerland : Trans Tech Publications, [2017] ©2017 |
Description: | 1 online resource |
Language: | English |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11676902 |
Table of Contents:
- Desorption Behavior of Epoxy/Amine-Coated Polyester Triangular Bar Composites Pre-Exposed to Acid Environment
- Study on the Mechanism of Pores Deformation in Aluminium Composites under Hot and Cold Upsetting Processes
- Preliminary Study on the Acoustical, Dielectric and Mechanical Properties of Sugarcane Bagasse Reinforced Unsaturated Polyester Composites
- Tensile Properties of Unidirectional Kenaf Polypropylene Composite at Various Temperatures and Orientations
- Tensile Properties of Woven Carbon/Kevlar Reinforced Epoxy Hybrid Composite
- Effect of Replacing Carbon Black with Surfactant-Modified Natural Feldspar on Mechanical Properties of Natural Rubber Composites
- Effect of Type of Amine Salt and Surfactant on the Water Sorption and Flexural Properties of Modified Zeolite/Polyester Composites
- Development, Manufacturing and Characterization of a New Composite Prepared from Cyperus corymbosus Rotth and Poly(Vinyl Chloride)
- Fire Retardation Mechanism of PVC Composite Filled with White Rice Husk Ash for Ceiling Board Applications
- Study on Utilization of Palm Frond for Wood Plastic Composite
- Improving Interfacial Adhesion of Sub-Micro PA6 Composites with De-Sized Carbon Fiber
- Morphological and Spectral Analysis of Polystyrene-Block-Polyisoprene-Poly(Butyl Acrylate) Triblock Copolymer
- Modeling the Hardness and Mechanical Properties of Moulded Natural Rubber Pad
- Effect of Replacing Carbon Black with Organo-Modified Bentonite and Acid-Activated Zeolite on Vulcanization Characteristics of Natural Rubber Tire Tread
- Epoxidation of Waste Rubber/Zeolite Powder as Potential Filler for Epoxy Resin
- Metal Organic Frameworks-Templated Hollow Mn2NiO4 Flower for Enhanced Supercapacitor Electrodes
- Reinforcement of Stereolithography Resin with Silica-Based Fillers
- RAFT Polymerization of Dual Responsive Hyperbranched-Star Copolymers of Methacrylic Acid and Poly(Ethylene Glycol)
- Temperature Dependence of Degradation of Colored Oxo-Biodegradable Low-Density Polyethylene Films under Accelerated Thermal Aging
- Conductivity Improvement of Silver Nanowire Transparent Electrodes by Surface Plasma Treatment
- Thermodynamics of Formaldehyde Removal by Adsorption onto Nanosilver Loaded Bamboo-Based Activated Carbon
- An Experimental Evaluation of Solid Lubricant Based Nanofluids in Small Quantity Cooling and Lubrication during Grinding
- Effect of Acid/Fiber Ratio on Physical Properties of Cellulose Nanofibers Extracted from Cassava Pulp
- Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature
- Photocatalytic Decomposition of Glycerol Solution on TiO2 Nanotube Arrays (TNTA) Doped with C and N to Produce Hydrogen
- Molecular Oxygen Adsorbed on Gallium Doped Graphene: A First-Principles Study
- The Physical and Photocatalytic Properties of N-Doped TiO2 Polycrystalline Synthesized by a Single Step Sonochemical Method at Room Temperature
- Laterally Inhomogeneous Barrier Height Analysis for Thermally Annealed CuNiTi/p-InP Contacts
- Modified Synthetic Fibers a Treatment for Heavy Metal Removal in Aqueous
- Effect of Degrading Transparent Oxo-Biodegradable Polyethylene Plastic Bags to Water Quality
- Effects of Various Pretreatment Variables on Hydrolysis of Lignocellulose to Produce Sugar in Bioethanol Production
- Heat Effects from Far-Infrared Source towards Antioxidant Activity in Aquilaria subintegra Leaves
- Copper-Treated Philippine Natural Zeolites for Escherichia coli Inactivation
- Microwave-Irradiation Induced Fast Simultaneous Extraction of Methoxylated and Hydroxylated Phenolic Compounds from Orthosiphon stamineus Leaves
- Hardness Removal from Water by Modified Starch
- Enzymatic Activity of Immobilized Carbonic Anhydrase onto Amberlite XAD7
- Optimization of Ultrasonic-Assisted Extraction of Polyphenolic and Flavonoids from Labisia pumila
- Swelling and Crosslinked Formaldehyde Chitosan as Adsorbent for Metal Ion Cu (II)
- A Comparative Performance of New Materials for Carbon Dioxide Removal in Absorption Process
- Addition of Mo Zn Fe and Ag into HZSM-5 and NaZSM-5 Catalysts
- Effects of Alkali and Thermal Treatment on the Ti6Al4V towards Apatite Deposition in Dulbecco's Phosphate Buffered Saline (DPBS) Solution
- Mechanical and Thermal Properties of Thermoplastic Film from Tacca leontopetaloides Starch Reinforced with Rice Husk Biochar
- Preparation and Dye Removal Properties of Hyperbranched Polymeric Ionic Liquid/Poly(Vinylidene Fluoride) Composite Films
- Properties of Composite Films from Sugarcane Bagasse, Coconut Coir, and Water Hyacinth Fibers/Poly(Vinyl Chloride)
- Effect of Coating Adhesion on Turmeric Essential Oil Incorporated into Chitosan-Based Edible Coating
- Effect of Sintering Temperature on Zinc Substituted Calcium Phosphate Ceramics
- Microscopic Methods for Characterization of Selected Surface Properties of Biodegradable, Nanofibrous Tissue Engineering Scaffolds
- Development of Brominated Flame Retardants (BFRs) Analysis with Liquid Chromatography-Tandem Mass Spectrometry (LC/MS/MS) in Sewage Sludge Matrix
- Photon-Induced L-Shell X-Ray Production Cross Sections for Lanthanides at 59.54 keV
- Hydrogen Bonds-Enhanced Organoclay-Free Oil Based Drilling Fluid System
- Interfacial Tension Measurement of Light Oil from Thailand to Enhance Oil Recovery for Surfactant Flooding Application
- Study on the Preparation and Properties of Hybrid Lubricant for Invert Emulsion Drilling Fluids
- The Study of Photocatalytic Oxidation of Benzyl Alcohol with g-C3N4 under Visible Light: Effect of pH and Salt
- Molecular Dynamics Simulation Study of Lecithin Inhibiting Hydrate-Dissociation
- Experimental Study on the Bundle Lithium-Ion Batteries Fire
- The Morphology Effect on the Selectivity of SPEEK/ENR Membranes for Direct Methanol Fuel Cell
- Optimization of the Microstructure of Molten Carbonate Fuel Cell Anode
- Effects of SPEEK/Cloisite Concentration as Electrospinning Parameter on Proton Exchange Membrane for Direct Methanol Fuel Cell Application
- Nanostructures and Properties of Vanadium Oxide Thin Film Prepared by Spray Pyrolysis Method
- Physical Properties of CdSxTe1-x Thin Films Prepared by Close Spaced Sublimation Method
- Influence of Annealing Temperature on the Properties of SnS Thin Films Prepared by Vacuum Thermal Evaporation
- Effect of Post-Annealing Treatment on the Structure and Luminescence Properties of AIN:Tb3+ Thin Films Prepared by Radio Frequency Magnetron Sputtering
- Growth Mechanism of Copper Oxide Fabricaticated by Potentiostatic Electrodeposition Method
- Design of Reservoir Recognition Technique Component - Open Porosity in Non-Polarizing Electrodes
- Preparation and Properties of CaO-MgO-Al2O3-SiO2 Glass-Ceramics from Granite Wastes
- Hot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb Alloy
- High Strain Rate Compressive Behaviour of Selective Laser Melted Ti-6Al-4V
- Structure and Properties of CuCr0.6 Alloy after Severe Plastic Deformation
- Influence of Microalloying (Including Rare-Earth Metals) on the Phase Composition and Properties of Aluminum Alloys
- Investigation of Impact Behavior of TIG Welded Inconel 718 at Aircraft Engine Operating Temperatures
- Analysis of Residual Stress on FSW AA 6061 Using Hole-Drilling with ESPI for HFMI Treated Condition
- Improving Mechanical Properties of Co-Cr-W Alloys by Powder Metallurgy
- Effect of Zr-Addition to Ti-14Mn Alloy
- Microstructural Investigation and Characterization of Bulk Brass Melted by Conventional and Microwave Processing Methods
- Implementing Thermomechanical Properties of 22MnB5 Steel during Hot Single-Point Incremental Forming
- Some Studies on the Bulging Characteristics of Cold-Upset Steel Preforms
- Microstructure and Wear Properties of High-Pressure Torsion Processed Iron
- Packing Efficiency Characterization of SiC Abrasive Machining Particles for Photovoltaic Silicon Wafer Slicing
- Laser Melting of High Thermal Conductivity Steel (HTCS) Surface
- Material Removal Model of Lap Grinding for Sapphire Substrate Based on Roughness Parameters
- Fabrication of Eco-Green Brick by Using of Vetiver Grass as Feldspar Replacement
- Effect of Delaying Addition of Heat Stimulated Superplasticizer on Fresh Properties of Mortar
- Investigation of Polyurethane Bonding to Steel in Sandwich Panels
- Mechanical and Durability Properties of Concrete Using Dredged Marine Sand
- Study of Sawdust and Expanded Polystyrene as Cavity Filler Material on the Effect of Thermal Conductivity in Perforated Clay Brick
- Compressive Strength of Mortars Admixed with Wollastonite and Microsilica