Advanced Materials and Engineering Materials V.
Saved in:
Author / Creator: | Kida, Katsuyuki. |
---|---|
Imprint: | Zurich : Trans Tech Publications, 2016. |
Description: | 1 online resource (423 pages) |
Language: | English |
Series: | Key engineering materials ; volume 703 Key Engineering Materials Vol. 703 Key engineering materials ; v. 703. Key Engineering Materials Vol. 703. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11409232 |
Table of Contents:
- Online Prediction and Verification of Cured Quality of Advanced Composites in Autoclave Process
- Steel Tube Bending with a Filling Medium of Fiber-Reinforced Ice (FRI)
- Influence of the Brittle Behavior of Work Materials on Microgrooving
- Design of Complex Component for Determination of a CNC Milling Machines Accuracy
- Comparative Research on the Quality of Micro Hole in Superalloy GH2135 and Stainless Steel 420J1 by Laser Processing
- Machining and Characterization of Deep Micro Holes on Super Alloy Processed by Millisecond Pulsed Laser
- Study on Roll Forming of Reel Mower Helical Blades
- Wear Mechanisms of Ceramic Cutting Tool when Cutting Hardened Steel Rolls
- Predicting Edge Cracks on Shear-Cut High-Strength Steels by Modified Uniaxial Tensile Tests
- Analysis on Phases and Grain Evolution of TC4 Ti-Alloy in Hot Forming in Time and Space Based on Deform-3D
- Effects of Heat Treatment on Microstructure and Properties of Stainless Clad Plate
- The Influence of Graphite Heat Conductor Technology on the Preparation and Crystal Structure of Single Crystal Blade
- Thermoelectric Properties of Silicon Germanium Alloy Nanocomposite Fabricated by Mechanical Alloying and Spark Plasma Sintering
- Advance of Sintering Methods of High Purity Alumina Ceramics
- Phase Field Simulation of the Lamellar Microstructure Formation in TiAl Alloys
- Toughening Effects of Carbon Nanotubes on 3Y-ZrO2 via Different Material Molding Technologies
- Effect of Preheating Temperature on Microstructure of Fe Based Alloy Coating by Laser Direct Metal Deposition
- Microstructural Dependence of Magnetization and Magnetostriction in Fe-20at.%Ga
- Fatigue and Cyclic Behavior of 304L Stainless Steel in the Presence of Boriding Surface Treatment
- Microstructure and Tribological Properties of Microarc Oxidation Coatings on Al-Si Alloy
- Study on the Microstructure and Properties of Iron-Based Wear-Resistant Coating on the Inner Wall of an Aluminium Cylinder Block
- Effect of Pre-Deformation on the Cyclic Behavior and Fatigue of 304L SS
- Investigations on Interface Reactions and Wettability between Melt Superalloys and Ceramic Materials
- Study of DP590 High-Strength Steel Sheet Cruciform Specimen for Biaxial Tensile
- Analyses about the Anisotropic Behavior of a 2017A Aluminum Alloy
- Experimental Study of Failure Mode Transition in Semi-Crystalline Polymers Polypropylene under High Strain Rate
- Study on Ductile Brittle Transition Temperature of Q345C Steel MAG Welded Joints
- Experimental Analyses about Ratcheting of Extruded 2017A Aluminum Alloy Subjected to Proportional and Non-Proportional Loadings
- A Study of Mechanical, Oil Resistance, and Low Temperature Resistance of NBR Vulcanizates
- Observation of Cracks of PEEK Polymer Thrust Bearings under Rolling Contact Fatigue in Water
- Crack Observation of PPS Polymer Thrust Bearings under RCF Test in Water
- Relationship between Failure and Temperature of PTFE Thrust Bearings under Dry Condition
- Backlash Evaluation of Hybrid UHMWPE-PEEK Bushes in a Small Robot Joint System
- Effect of New Pocket Design on the Failure of Thrust UHMWPE Bearings in Dry Condition
- Rolling Contact Fatigue Observation of Radial PPS Bearings under Dry Condition
- Experimental Study on Evolution Process of Short Fatigue Crack in 2A12 Alloy under Complex Stress State
- Application of Small Size Solar Furnace onto Preparation of Copper Oxide Thin Films by Sol-Gel Route
- Investigation of Structural, Optical an Electrical Characterization of AZO Films Used for Solar Cells
- The Effect of Reaction Time on Optical Trapping Nanostructure Formation on the Multi-Crystalline Silicon by Metal-Assisted Chemical Etching
- Effects of Strain on Optical Properties of BiFeO3: A First-Principles Study
- The Effect of Substrate Surface Condition on Atomic Layer Deposited Alumina Passivation Films
- Synthesis and Characterization of Poly(o-Methoxyaniline) Microsheets with pH-Sensitive Fluorescence Properties
- Morphology Control and Upconversion Enhancement in NaYF4:Yb3+,Er3+ Crystals via Ca2+ Ions Doping
- Surface Modification of Nano-Al2O3 with Stearic Acid
- The Influence of Geology Factor on Alkaline Surfactant Polymer Flood Effect and the Corresponding Strategy
- Study on the Synthesis of Waterborne UV Curable Polyurethane Acrylate
- Structure and Properties of Dyes in Coloration of Textiles: Application of Fragment Approach
- One-Pot, Low-Temperature Preparation of Pyrochlore-Like Na2Ta2O6 Nanocrystals by Solvothermal Synthesis
- Synthesis and Property of Polyurethane Acrylates Modified Graphene Oxide
- Preparation and Characteristics of Highly Expandable Graphite Intercalation Compounds by Two-Step Chemical Intercalation
- Research on the Preparation and Properties of UV-Curable Organic Silicon Nanomaterials
- Characteristics and Biodegradation Properties of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/Functionalized Graphene (PHBV/FGO) Blends
- Preparation of Gypsum Retarding Material and Activated Carbon from Waste Mycelium
- Photocatalytic Oxidative Decolorization of Methyl Orange with Iron Phthalocyanine/Calcium Alginate Gel Beads
- Oxidative Decolorization of Azo Dyes with Copper Phthalocyanine Supported Mg-Al Hydrotalcites
- Simple Synthesis and Activities of Visible-Light Activities BiVO4 Doped Al via Solid State Method
- Facile Solid State Method Route Synthesis and Enhance Visible Light Activities of BiVO4 by Doping Co
- Preparation and Photocatalytic Activity of Cu/BiVO4 by Solid State Grinding Method for Degradation of Methyl Orange
- Preparation and Activities of Visible-Light-Driven BiVO4 by Doping Ag via Solid State Method
- Experimental Research on Adsorbents Preparation Made from Oily Sludge
- Compound Mutation Breeding of Streptococcus equi JC-63 for Producing High Molecular Weight Hyaluronic Acid and Optimization of Culture Conditions
- Dynamic Behaviors of Mucky Clay Material under Cyclic Loads
- 3D Eddy Current Testing by FEM for Detection of Crack's in Materials
- Effect of Nano-CaCO3/Limestone Powder Composite on the Early Age Cement Hydration Products
- Study on the Effect of Condensate-Type and Copolymer-Type Combined Superplasticizers on Hydration of Cement
- Influence of Structural Irregularities of Tserkov Building on its Dynamic Behavior under Induced Seismic Shock of Mining Origin
- Flexural Analysis for Tapered Cross-Section Steel-Concrete Material Composite Beam
- Changes in Magnetic Flux Density Distributions of Chromium Molybdenum Steel (JIS, SCM440) by Slit Opening and Crack Growth
- Test Study on the Compressive Strength Properties of Compacted Clayey Soil
- Thermal, Strength and Leachability Characteristics of Cellulose Fibre Reinforced Lime-Soil Brick
- The Water Retention Characteristics of an Unsaturated Compacted Loess Material
- Impact Resistance of Graded Cellular Metals Using Cell-Based Finite Element Models
- Effect of Aluminum Insertion Material on the Properties of AAC
- Mechanical Properties the Cast In Situ Foamed Lightweight Soil
- Study of Migration Regularity and Controlling Factors of Subgrade Moisture under Atmosphere Action