Science and engineering of materials. selected, peer reviewed papers from the 2nd International Conference on Science and Engineering of Materials 2015 (ICoSEM 2015), November 16-18, 2015, Kuala Lumpur, Malaysia / II, Materials and technology for a sustainable future :
Saved in:
| Meeting name: | International Conference on Science and Engineering of Materials (2nd : 2015 : Kuala Lumpur, Malaysia) |
|---|---|
| Imprint: | Switzerland : Trans Tech Publications Ltd., [2016] ©2016 |
| Description: | 1 online resource : illustrations. |
| Language: | English |
| Series: | Key engineering materials ; volume 701 Key engineering materials ; v. 701. |
| Subject: | Materials science -- Congresses. TECHNOLOGY & ENGINEERING -- Engineering (General) TECHNOLOGY & ENGINEERING -- Reference. Materials science. Conference papers and proceedings. Electronic books. |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11407834 |
Table of Contents:
- Effect of ENR50/STR5L Blends on Properties of Foodstuff Conveyor Belts Compound
- Effect of Ethylene Glycol on Polymeric Membrane Fabrication for Membrane Distillation
- The Progress of Polymeric Membrane Separation Technique in O2/N2 Separation
- Fabrication and Characterization of Porcine Bone-Derived Hydroxyapatite-Alumina Biocomposite
- Fabrication and Characterization of Poly(Vinyl Alcohol)/Chitosan Blend Electrospun Nanofibrous Membrane
- Synthesis and Characterization of Covalent Organic Polymer
- Mathematical Modeling of Thickness Dependent Physical Aging in Polymeric Membranes
- The Synergistic Effect of Flame Retardants on Flammability, Thermal and Mechanical Properties of Natural Fiber Reinforced Epoxy Composite
- The Effects of Graphene and Flame Retardants on Flammability and Mechanical Properties of Natural Fibre Reinforced Polymer Composites
- Effect of Aluminum Source on the Structural and Thermal Properties of Partially Phosphorylated Polyvinyl Alcohol Composite (PPVA) - Aluminum Phosphate (PPVA-AlPO4) Nanocomposite
- Effect of Chemical Treatment on Oil Palm Empty Fruit Bunch (OPEFB) Fiber on Water Absorption and Tensile Properties of OPEFB Fiber Reinforced Epoxy Composite
- Study on Interlaminar Shear Strength of Angle Ply Oriented Basalt-Carbon Hybrid Composite
- Synthesis and Characterization of Polyvinyl Alcohol/Zinc Hydroxide Composite
- Non-Isothermal Degradation Kinetics of Asphalt in Relation to its Chemical Composition
- Shear Resistance Enhancement of Oil-Contaminated Railtrack Ballast with Rubber Circular Patch Formulation
- Synthesis and Characterization of Highly Crystalline Zinc Phosphide Nanoparticles
- Effect of Ferrocene Catalyst and Hydrogen Feed on Microstructures of Vertically Aligned MWCNTs
- Thermal Conductivity Enhancement of Graphene Epoxy Nanocomposite
- Surface Modification of Multi-Walled Carbon Nanotube Using Double-Chained Quartenary Ammonium Bromide
- Electrodeposited Iron(III) Oxide (#945;-Fe2O3) Thermoelectric Thin Films
- Synthesis of TiO2 Nanotube Arrays in NaOH Added Ethylene Glycol Electrolyte and the Effect of Annealing Temperature on the Nanotube Arrays to their Photocurrent Performance
- Electrophoretic Deposition of Functionalized Multi-Walled Carbon Nanotubes (f-MWCNTs)-Polyaniline (PANi)
- Process Development and Optimization of Carbon-Based Thin Film Deposition through Ablation of Graphite
- Decoration of Plasma-Reduced Graphene Oxide with Uniform Gold Nanoparticles and their Redox Reaction Performance
- An Assessment of Chemical Vapor Deposition Synthesis of SnO2 Nanowires by Statistical Design
- Modelling and Simulation of Rectangular Bundle of Single-Walled Carbon Nanotubes for Antenna Applications
- Effects of Ultrasound Irradiation on Synthesis of Solid Acid Catalysts
- Impact of LPCVD TEOS Thickness on Vt-Pushout in Flash Memory Cell due to Mechanical Stress
- Characterization of Stoichiometric ZrO2 Thin Film on Si by Angle-Resolved X-Ray Photoelectron Spectroscopy
- Thermal Degradation and Char Morphology of HNTs Reinforced Epoxy Based Intumescent Fire Retardant Coatings
- Surface Morphology Analysis and Mechanical Characterization of Electrospun Nanofibrous Structure
- Laser Recovery of Subsurface Damages in Chemomechanically Polished Silicon Wafers
- Effect of Mixed Filler on Thermal Properties of Foodstuff Conveyor Belts Compound Using an Industrial Microwave Pre-Heating
- Effect of Surfactant on EDM of Low Conductivity Reaction-Bonded Silicon Carbide
- Optimization of Warm Compaction Process Parameters in Synthesizing Carbon-Copper Composite Using Taguchi Method
- Preparation of Oil Palm EFB Derived Solid Acid Catalyst for Esterification Reaction: Effect of Calcination Temperature
- Oxidation Behavior of NiAl Produced by Gel Combustion Synthesis
- Influence of Second Reflow on the Intermetallic Compound Growth with Different Surface Finish
- Microstructural Study of Leached Nitrided Malaysian Ilmenite with Coal-Polystyrene Reductant
- Characterization of Raw and Thermally Treated Alum Sludge
- Prediction and Optimization of Process Parameters on Metal Inert Gas of Dissimilar Aluminium Alloy AA6061-T6 and AA7075-T6 Using Response Surface Method Analysis
- Interfacial Reaction Analysis of Cu-Sn-Ni-P/Cu Joint Using Microwave Hybrid Heating
- Effect of Taper Pin Ratio on AA7075 Aluminium Alloy Friction Stir Welding
- Influences of Stirring Speed and Post Annealing Temperature on the Properties of Zinc Oxide Colloid Prepared by Sol-Gel Spin Coating Method
- Investigation on the Effect of Crystal Orientation Dependence of Pulse Porous Silicon for White Light Emission
- Study of Forging Process of Yttrium-Modified A356 Aluminum Alloy and Numerical Simulation by Thermo-Viscoplastic Finite Element Method
- Feasibility Study of Low Power Fiber Laser Welding AA2024 and AA7075 Alloys T-Joint
- Effect of Rolling Reduction on Microstructure and Mechanical Properties of Plain Low Carbon Steel
- Optimisation of Assembly Line Balancing Type-E with Resource Constraints Using NSGA-II
- Optimisation of End Milling Machining Parameters Using the Taguchi Method and ANOVA of AlSi/AlN Metal Matrix Composite Material
- Experimental Study of Engine Performance and Fuel Consumption Using Various Blends: Ethanol, Naphthalene and Palm Oil
- Development of a Quantifiable Approach in Monitoring the Fatigue Cracks Using Digital Image Correlation
- Interfacial Reaction between Sn-Ag-Cu-Mg Solder and ENIG Substrate
- Evaluation of Thermoelectric Properties of Cu3.21Bi4.79S9 Bismuth Chalcogenide
- The Effect of Iron Oxide on the Mechanical and Ageing Properties of Y-TZP Ceramic
- Multiaxial Viscoplasticity Modelling of Power Plant Steel
- Numerical Simulation of a Corner Crack Growth in Metals under Multiaxial Fatigue Loading