21st Brazilian Conference on Materials Science and Engineering : selected, peer reviewed papers from the 21st Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 9-13, 2014, Cuiabá (MT), Brazil /
Saved in:
Meeting name: | Congresso Brasileiro de Engenharia e Ciência dos Materiais (21st : 2014 : Cuiabá, Brazil), author. |
---|---|
Imprint: | Pfaffikon, Switzerland : Trans Tech Publications, [2016] Enfield, NH : Distributed in the Americas by Trans Tech Publications, Inc. ©2016 |
Description: | 1 online resource (1042 pages) : illustrations. |
Language: | English |
Series: | Materials Science Forum ; Volume 869 Materials science forum ; volume 869. |
Subject: | Materials science -- Congresses. TECHNOLOGY & ENGINEERING / Engineering (General) TECHNOLOGY & ENGINEERING / Reference Materials science. Electronic books. Conference papers and proceedings. |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11407577 |
Table of Contents:
- Pure and Doped SrTiO3 Powders Obtained by Ultrasonic Synthesis
- Effect of Strontium Doping on the Structural, Morphological, and Dielectric Properties of PZT Ceramics
- Study on the Piezoelectric Behavior and Structural Changes of Strontium Doped PZT Ceramics
- Structural and Microstructural Properties of Si-C and Si-C-B Powders Obtained by High-Energy Ball Milling
- Use of Statistical Techniques in the Optimization of the Process "Starch Consolidation"
- Nondestructive Analysis of Bi2212 Bulk Superconducting Ceramics in the C-Axis Direction
- Synthesis, Characterization and Photoluminescent Properties of ZrO2 Nanocrystals
- Obtaining of Ceramic Sensor Devices for Soil Humidity Measurements in Different Climatic Conditions
- Comparative Analysis of Fracture Toughness Obtained by Different Techniques in Alumina Matrix - Dispersed TZP Zirconia Composites
- Harder and Denser AlN-TiB2 Ceramic Composites Processed by Spark Plasma Sintering
- Effect of Boron and Carbon Addition on the Phase Transformations during High-Energy Ball Milling and Subsequent Sintering of Si3N4+B and Si3N4+C Powder Mixtures
- Fracture Stress Analysis in Ceramic Composites of Alumina Matrix with Zirconia 3Y-TZP Nanograins for Mechanical Shielding of Satellites
- Synthesis and Sintering of LaCo1-XFexO3 Ceramics: Microstructure Analysis
- Thermal Characterization of Neodymium-Barium-Copper Ceramic (NBCo Ceramic) Synthesized from Barium Carbonate
- Ga2O3-Doped ZnO-Nb2O5-TiO2 Dielectric Resonators for Terrestrial and Space Telecommunications Applications
- Rheological Behavior of Paraffin-Alumina Emulsions and their Microstructural Effects
- Evaluation of Sample Preparation Parameters in the Compressive Strength of Cementitious Composites
- A Study of the Mechanical Behavior of Concrete Using Additive and Waste Tires Rubber through a Diametral Compression Test Using Digital Image Correlation
- Determining the Content of Toxic Substances in Panels from Pruning Acacia mangium Willd
- Hydration and Dehydration of High Initial Strength Portland Cement Type CP V - ARI
- A Study of the Chemical and Physical Characteristics of the Soils from the South of Piauí for Soil-Cement Brick Production
- Moisture Expansion during the Formation of Crystalline Phases in Clay/CaCO3 Mixtures
- Evaluation of a Tacking Stage for Adherence, between Mortar and Ceramic Brick
- Factorial Design for 32 Experimental Planning of Clay Ceramic Incorporated with Ornamental Stone Waste
- Influence of Weather Exposure on Dimensional Changes in Clay Ceramics Incorporated with Granite Residue
- Production Speed and its Influence on Hue Variation on Tiles Decoration Based on Silicon Cylinder Technique Laser Engraving Method
- Influence of Reburning on the Pozolanicity of Sugar-Cane Bagasse Ashes with Different Characteristics
- Utilization of Foundry Waste to Produce Ceramic Matrix Composites
- Purification Route of Pyrite from Coal Mining
- Microstructural Characterization of Ornamental Rock Samples: Cariri Rocks
- Recycled Alumina Production from the Anodizing Industry to Tubulation Coating of Petroleum Craking
- Synthesis of Ceramic Pigment Based on Crystal Structure of Wollastonite
- Organofunctionalization of Natural Palygorskite with Ethylene Sulfide in the Absence of a Solvent
- Evaluation of the Potential of Using Quartzite Residue in Mass for the Production of Sanitary Ware
- The Use of Dust Emission from Foundry Industry as Raw Material to the Industry of Ceramic Coating
- Chemical-Mineralogical and Microscopic Characterization of Clay Used as Raw Materials in Santa Gertrudes' Ceramic Pole
- Beneficiation of Kaolins by Hydrocycloning
- Dynamic-Mechanical Performance of Sponge Gourd Fiber Reinforced Polyester Composites
- Comparison between Rice Husk Ash and Commercial Silica as Filler in Polymeric Composites
- Mechanical Analysis of Polybenzoxazine Matrix in Fiber Metal Laminates
- Tensile Behavior of Epoxy Composites Reinforced with Thinner Fibers of Sugarcane Bagasse
- Charpy Toughness Behavior of Eucalyptus Fiber Reinforced Polyester Matrix Composites
- Chemical Treatment and Characterization of Fiber of Babassu Coconut Epicarp (Orbignya phalerata) for Application in Polymeric Composite
- Composites Based on Thermoset Resin and Orbignya phalerata (Babassu Coconut): Evaluation of Mechanical Properties, Morphology and Water Sorption
- Bending Mechanical Behavior of Epoxy Matrix Reinforced with Buriti Fiber
- Tensile Behavior of Epoxy Composites Reinforced with Thinner Sisal Fibers
- Under Pressure Processed Polyester Composites with High Amount of Curaua Fibers for Improved Tensile Properties
- Carnauba and Rhea Americana Eggshell Powder Incorporation in PHB Bionanocomposites
- Evaluation of Biodegradability of a Compost Obtained from Polymeric Composite Reinforced Natural Fibers
- Differential Scanning Calorimetry Tests of Epoxy and Polyester Composites Reinforced with Giant Bamboo Fibers
- Development of Ni/h-BN Self-Lubricating Composite Powder by High-Energy Ball Milling
- Characterization by Fourier Transform Infrared (FTIR) Analysis for Natural Jute Fiber
- Study of the Degradability of PA6/Organoclay Nanocomposites
- Effect of Molecular Weight of Polyamide 6 in Rheological Properties of Nanocomposites with Brazilian Organoclay
- Evaluation of Biodegradation of PHB/PP-G-MA/Vermiculite Bionanocomposites
- Characterization of Bionanocomposites PHB, PEG and Organophilic Clay
- Evaluation of Current in Composites PVAL/Ceramics for Detection of Leakage Current Generated in Electrical Insulators
- Effects of 3-APTMS-Modified Nano-SiO2 on the Mechanical Properties and Crystallization Behavior of Polyamide-6
- Stress Cracking Analysis on Automotive Tubes Made with Polyamide 12
- Mechanical Properties of Natural Fibers Reinforced Polymer Composites: Palm/Low Density Polyethylene
- Characterization of Epoxy Matrix Reinforced with Banana Fibers Thermal Properties by Photoacoustic Technique
- Preparation and Characterization of Composites Obtained of Polymeric Waste Coming from Boards Electronic Equipment
- Effect of Hydrolytic Degradation on Mechanical Properties of PCL
- Changes in Molecular Weight of Poly(Styrenesulfonate) Initiated by Thioxanthone: Photolysis and Photo-Oxidation
- Processing of Pet-Silver Nanocomposite Filaments
- Study of Damage in the Medium Density Polyethylene Using Digital Image Correlation
- Tensile Test of High Strength Thinner Curaua Fiber Reinforced Polyester Matrix Composite
- Influence of Graphite Powder and Carbon Black Weight Percentages on the Electrical Properties of Epoxy Composite Plates
- Pullout Tests Behavior of Polyester Matrix Reinforced with Malva Fiber
- Correlation between the Density and the Diameter of Fique Fibers
- Density Weibull Analysis of Pineapple Leaf Fibers (PALF) with Different Diameters
- Fabrication of Polypyrrole Nanoparticles Using Microemulsion Polymerization for Diferent Py/APS/SDS Molar Ratios
- Effect of the Fiber Equivalent Diameter on the Elastic Modulus of Eucalyptus Fibers
- Influence of Martensitic Transformation on the Fatigue of Low Temperature Metastable Stainless Steel
- Evaluation of Martensite Fraction in 1026 Steel by Infrared Thermography Combined with the Koistinen-Marburger Model
- Application of Computational Thermodynamics to the Evolution of Surface Tension and Gibbs-Thomson Coefficient during Multicomponent Aluminum Alloy Solidification
- Formation of Ni3Ta, Ni2Ta and NiTa by High-Energy Ball Milling and Subsequent Heat Treatment
- Analysis of the Microstructural Evolution during the Transient Upward, Downward and Horizontal Directional Solidification of the Al-1.2wt%Pb Monotectic Alloy
- Static Aging Behavior of Microalloyed Wire Steel and Carbon Wire Steel
- Friction Stir Welding of Aluminium Alloy Sheets
- Manufacturing and Characterization of AA1100 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Carbide and Alumina Processed by Powder Metallurgy
- Thermal Parameters, Tertiary Dendritic Growth and Microhardness of Directionally Solidified Al-3wt%Cu Alloy
- Pulsed Nd:YAG Laser Welding of UNS S 32205 Duplex Stainless Steel
- Crystallization of Amorphous Cu49.7Ti31.8Zr11.3Ni7.2 Alloy
- Effect of Corrosion of Stainless Steel Welded within Lithium Chloride
- Influence of Heat Treatment on Martensitic Transformations in Copper-Based Alloys with Shape Memory Effect
- Microstructural Characterization of Joints of Maraging 300 Steel Welded by Laser and Subjected to Plasma Nitriding Treatment
- Sintered Nickel Casing for Irradiation Targets
- Strain-Induced Martensite Formation of AISI 304L Steel Sheet: Experiments and Modeling
- Mechanical Behavior and Structural Analysis of a TiNi Alloy Annealled in the 300 to 500°C Range and Air Cooled
- Study of Fatigue in AISI 4340 Steel with Different Microstructural Conditions, Submitted to a Surface Treatment of Shot Peening
- The Effect of Phase Transformation on the Tensile Fracture of Austenitic Stainless Steel
- Evaluation of Cracking Susceptibility of Weldment Container for Nuclear Power Plant
- Fracture Behavior of 316 Stainless Steel under Creep at 600 and 800°C
- Study of Aluminum Alloy 7050 T7451 Isotropic Hardening
- Elasto-Plastic Modeling of the Limit Strains in Metallic Sheets
- Work Hardening and Microstructural Effect during Dynamic Deformation of Polycrystalline Copper
- Special Effects in Deformation Mechanism Maps for Austenitic Stainless Steels
- Kinetic Study on Martensite Formation in Steels 1045 and 4340 under Variable Cooling Rates
- Characterization of Residual Stresses and Microstructural by Technique of Magnetic Barkhausen Noise of API 5L X80 Steel Heat Treatment
- Secondary Austenite Precipitation during the Welding of Duplex Stainless Steels
- Evaluation of Residual Stresses in Welded ASTM A36 Structural Steel by Metal Active Gas (MAG) Welding Process
- Artificial Neural Network Model for Predict of Silicon Content in Hot Metal Blast Furnace
- Preparation and Melting of Zr-1.0Nb Alloy
- Hysteresis Modeling of NdFeB Magnets with High Nd
- Shape Anisotropy as Coercivity Mechanism
- Loss Separation Model: A Tool for Improvement of Soft Magnetic Materials
- Perspectives for the Brazilian Industry of Rare-Earth Magnets
- EBSD Analysis of SmCoFeCuZr Alloys
- Suitable Nanostructures for Obtaining the Maximum Energy Product in Magnets
- Effect of Cooling Rate on the Corrosion Behavior of As-Cast SAF 2205 Duplex Stainless Steel after Solution Annealing Treatment
- Study and Development of Advanced High Strength Steel to Automotive Industry Applications
- The Influence of High Gravity in PbSn Eutectic Alloy
- The Influence of Gravity on Eutectic PbSn Alloy Grown by the Vertical Bridgman Method
- Displacement of the Ingnition Furnace in the Iron Ore Sintering with Re-Circulation of Waste Gases
- Simulation of Cooling Curves of the Heat Affected Zones of API 5L X80 Steel of Welds Made by Flux Core Arc Welding Self Protecting
- Evaluation of Green Corrosion Inhibitors for Applying in Food Packaging
- Study of the Efficiency of Ag-SiO2 Nanoparticles as Additives in Anticorrosion Coatings
- Corrosion Behavior of Fe-Mn-Si-Cr-Ni-Co Shape Memory Stainless Steel in Highly Oxidizing Medium
- Characterization of AISI 316L Stainless Steel Pattern via DC Plasma Nitriding
- Development of Coating to Metallic Surfaces with Capacitive Capabilities for Applications in Electronics
- Parameters Evaluation of Bond-Coat Deposited by CO2 Laser Beam for Aeronautical Turbine Blades
- Structural Changes in TiO2 Films Formed by Anodizing of Electro-Polished Titanium
- Zirconium Based Metal Pretreatments: A Characterization Method for Ecologically Sustainable Thin Film Surface Pretreatments
- Corrosion by Sulfate Reducing Bacteria in Welded Joints of Stell API 5L X80
- Effect of Thermal Aging at Low Temperature on the Mechanical Properties and Corrosion Resistance of LDX 2404 Duplex Stainless Steel
- Obtaining and Characterization of Zirconium and Cerium Coatings
- Pre-Treatment of Niobium Phosphate for Protection against Carbon Steel Corrosion
- Effect of Argon during Diamond Deposition by Hot Filament Chemical Vapor Deposition
- Analysis of the Metallurgical Bonding between Inconel and NiCrAlY Coatings by HVOF and with CO2 Laser Beam
- Sorption of Bright Yellow Dyes by Filter Papers
- Functionalization of Cellulose with Cysteamine: Synthesis, Characterization, and Adsorption
- Cellulose Phosphate Applied in the Removal of the Drug Acetaminophen from Aqueous Media
- Synthesis and Characterization of CMC for Potential Application as Adsorbent in Water Treatment
- Environmental Evaluation of Stabilized and Solidified Products in Brazil: A Review
- Attapulgite Performance in the Degradation of the Yellow Bright Dye
- Photocatalysis of Coomassie Brilliant Blue Using Clay Mineral
- Incorporation of Zirconium Oxide on the Surface of Palygorskite Clay for Photodegradation of Industrial Dye
- Application of Palygorskite in Purification Process of Frying Oil
- Study of the Interaction of Copper Nanoparticles with Titanium in Landfill Soils Layers
- Effluent Treatment of Synthetic Tanning by Nanomaterials Photocatalytic
- Synthesis and Photocatalytic Evaluation of Nanocrystalline ZnO Obtained by High Energy Milling
- Ion Exchange in Sodium Titanate Nanoribbons and its Application in Dye Photodegradation of Remazol Blue
- Influence of the Addition of Inorganic Salt in Obtaining Hybrid Membranes
- Electrochemical Behavior of Electroactive PVS/PANI Films Containing Chemically Modified Cellulose
- Development of Polymer Membranes Modified with a Porogenic Agent
- Photosensitized Polystyrene Film for Dye TX under Different Radiation Sources
- Influence of Content and Treatment of Clay in the Morphology of PES Membranes
- Mechanical Analysis of Biodegradable Films from Native and Chemically Modified Potato Starches
- Morphological Analysis of Membranes of PES/Commercial Clay
- Nanostructured and Electroactive Hybrid Films Containing Microcrystalline Cellulose Modified with the Phosphate Group: Synthesis and Characterization
- Development and Evaluation of Capsule of Sodium Diclofenac and Paracetamol Using Mesocarp Babassu Powder as Excipient - Part II
- Morphological Evaluation of Chitosan/Curcumin Beads and Powder: Effect of the Methanol as a Solvent
- Evaluation of Antibacterial Activity of Chitosan Membranes Associated to Unripe Banana Peel
- Development and Characterization of Chitosan Membranes as a System for Controlled Release of Piperine
- Antibacterial Activity of a Chitosan Derivative Obtained in the Absence of a Solvent
- Evaluation of the Potential of Mesocarp Babassu Powder as a Technological Excipient to Pharmaceutical Industry - Part I
- Synthesis and Characterization of Fe3O4 Nanoparticles Stabilized by Polyvinylpyrrolidone/Polyethylene Glycol with Variable Mass Ratios
- Synthesis and Characterization of Ceramic Modified with Niobium for Biomedical Applications
- Hydroxyapatites Obtained from Different Routes and their Antimicrobial Properties
- Hydroxyapatite Nanoparticles: Synthesis by Sonochemical Method and Assessment of Processing Parameters via Experimental Design
- #946;-TCP Produced through the Starch Consolidation Technique
- Effect of Some Heat Treatments on Anelastic Properties of Ti-15Zr-xMo Alloys
- Surface Modification of the Alloy Ti-7.5Mo by Anodization for Biomedical Applications
- Osseointegration of Ti-30Ta Implants without Primary Stability: Effect of Tranexamic Acid
- Nanotubes Growth on Ti-15Mo Alloys by Anodization at Low Voltage
- Surface Modification of Ti-30Ta Alloy by Electrospun PCL Deposition
- Mechanical and Microstructural Characterization of the Ti-25Ta-25Nb Alloy for Dental Applications
- Preparation and Characterization of Ti-10Mo-xZr Alloys for Biomedical Applications
- Preparation, Microstructural Characterization, and Selected Mechanical Properties of Ti-20Zr-2.5Mo and Ti-20Zr-7.5Mo Used as Biomaterial
- Effect of Hot Swaging on Microstructure and Properties of Aged Ti-10Mo-20Nb Alloy
- Evaluation of Setting Time, Ions Release, Sealing Ability and Adhesion of a Novel Experimental Endodontic Cement
- Biocidal Glasses with High Performance: Comparison of the Antimicrobial Action Obtained by Use of Different Metal Ions
- Different Synthesis Routes for Hydroxyapatite Nanoparticles by Mechanical Stirring
- Deposition by Spray-Pyrolysis of Tin Oxide Doped with Fluorine Produced by Sol-Gel Method
- Synthesis of ZnO Nanoparticles Doped with Cobalt: Influence of Doping on the Magnetic and Fluorescent Properties
- Pd-Based Electrocatalysts Prepared by Borohydride Reduction Method for Methanol and Ethanol Electro-Oxidation in Alkaline Medium
- Effects of Solvent and Concentration of Borohydride for the Preparation of PtRu/C Electrocatalysts for Direct Methanol Fuel Cell Anodes - A Factorial Design Study
- Influence of Time and Temperature on Directional Growth of MoO3
- Kinetic of Self-Reducing Mixtures of Iron Ore and Biomass of Elephant Grass
- Sintering of Manganese Ore Tailings under an Argon Atmosphere
- Influence of Clay Swelling Inhibitor in Filtration Properties of Water-Based Drilling Fluids
- Contaminants Recovery from Acid Mine Drainage