Advanced materials and structures VI : selected, peer reviewed papers from the 6th International Conference Advanced Materials and Structures, October 16-17, 2015, Timişoara, Romania /
Saved in:
| Meeting name: | International Conference on Advanced Materials and Structures (6th : 2015 : Timişoara, Romania) author. |
|---|---|
| Imprint: | Pfaffikon, Switzerland : Trans Tech, [2016] ©2016 |
| Description: | 1 online resource |
| Language: | English |
| Series: | Solid state phenomena ; volume 254 Diffusion and defect data. Pt. B, Solid state phenomena ; v. 254. |
| Subject: | Materials science -- Congresses. TECHNOLOGY & ENGINEERING -- Engineering (General) TECHNOLOGY & ENGINEERING -- Reference. Materials science. Electronic books. Conference papers and proceedings. |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11407576 |
Table of Contents:
- Wear Resistance of Laser Cladded NiCrFeSiB Self-Fluxing Composite Coatings
- The Influence of Hybrid Material Parameters in Socked-pin Connection on the Value of Opening Force
- Ti-Al Membranes for Microfiltration
- Thermal Analysis to Optimize and Control the Cast Iron Solidification Process
- Study and Optimization of Metal Based Sintered Materials for Automotive Brake Friction Production
- Influence of the Graphitisation Degree of Carbon Nano Fibres Serving as Support Material for Noble Metal Electro Catalysts on the Performance of PEM Fuel Cells
- Characterization of Fusion Lines Obtained with Laser Welding on Ductile Iron Plates
- Validation of Novel Wobbe Index Sensor for Biogas Cogeneration
- Development of Parametric Kelvin Structures will Closed Cells
- Peridynamical Modelling of Nanoindentation in Ceramic Composites
- Effect of Cu and Gd on Structural and Magnetic Properties of Fe-Co-B-Si-Nb Metallic Glasses
- Microstructural Transformation during Dissimilar Friction Stir Welding (FSW) of Aluminum-Cooper Alloys
- A Comparison between Hardness, Corrosion and Wear Performance of APS Sprayed WC-CoMo and WC-Co Coatings
- A Comparison of Flame Coating and Laser Cladding Using Ni Based Powders
- A Model of Optimization and Control the Thermite Kit for Aluminothermic Welding
- Advanced Materials with Natural Fibred Reinforced Aluminiu Composite for Automotive Brake Disc
- A Study of Ti-Ta Library and Microstructure Manufactured by Magnetron Sputtering
- Analytical Calculation of Resistance to Burst of Single Jersey Underlying Two Synthetic Materials Used in Furniture Industry
- Alumide Sinterization Aspects According to Layer Orientation, in Rapid Prototyping Process
- Consolidation Features of Aluminum-Alumina Compositions by Powder Metallurgy Methods
- Analytic Study Regarding Yarn Geometry of Two Synthetic Materials Used in Furniture and Automotive Industry
- A Study of Mode III Fracture Toughness in Young and Mature Concrete with Fly Ash Additive
- Cranioplasty Based on Modern Methods for Personalized Design and Manufacturing
- Current Technologies and Materials for Dental Fixed Prosthetic Restorations
- Calibration of a Shear Specimen
- Influence of the Addition of a Reducing Mixture Slag and Duration of Treatment on the Desulphurisation and Deoxidation Efficiency
- Calorimetric Studies of the Martensitic Transformation in Ni-Mn-Ga Ferromagnetic Shape Memory Alloys
- Optimisation of the Electrodeposition Parameters for Platinum Nanoparticles on Carbon Nanofibers Support
- Comparative Study of Mechanical Properties of Aluminium Wires from New and Used ACSR Conductors
- Optimization of Process Parameters for the Manufacturing of High Temperature Vacuum Brazed WC-NiCrBSi Coatings
- Heat Transfer Process in Jet Turbine Blade with Functionally Graded Thermal Barrier Coating
- Optimization of Synthetic Slag Additions Used in Continuous Casting of Steel
- Preliminary Tests for Precious Metals Recovery from Sideritic Waste
- Macroscopic Evaluation of Fracture Processes in Fly Ash Concrete
- Mechanical Characteristics Alteration of a Steel Used in Water Turbine Blades
- Synthesis of SnO2 by Sol-Gel Method
- Research on Composite Materials Used for Brake Shoes Manufacture
- Modelling of Resistance Brazing Process Using Factorial Design
- Researches Regarding the Influence of Vacuum Parameters on the Efficiency of Gas Removal from the Liquid Steel
- Numerical and Experimental Analysis of Foreign Objects Impact into the Surface with TBC Coating
- Sliding Wear Behavior of Remelted Al2O3-TiO2 Plasma Sprayed Coatings on Titanium
- Numerical and Experimental Studies of Fluid Flow and Heat Transfer in a Model Experiment for Hydrothermal Growth
- Studies Regarding the Use of Molding Mixtures Based on Chromite-Sand to the Casting of the Steel Parts
- Numerical Model of Thermal Field Developed in Fe67Cr4Mo4Ga4P12B5C4 Bulk Amorphous Alloy Processing
- The Influence of Cooling Rate and Equivalent Carbon on the Chill Tendency and Cooling Curves Parameters in Uninoculated and Inoculated Grey Cast Iron
- Numerical Modeling of Thermal Field Distribution during Friction Stir Welding (FSW) of Dissimilar Materials
- Designing an Injection Mould Using Advance CAD-CAM Programs
- Numerical Simulation of Friction Stir Welding (FSW) Process Based on ABAQUS Environment
- Superelastic Behavior in NiTi Shape Memory Alloy Wires and Ribbons
- The Deformation Process of Thin-Walled Box Beams Joined by Rivets under Three-Point Bending