Brazilian ceramic conference 57 : selected, peer reviewed papers from the 57 th Brazilian Ceramic Conference (CBC57), May 19-22, 2013, Natal/RN, Brazil /
Saved in:
Meeting name: | Brazilian Ceramic Conference (57th : 2013 : Natal, Brazil) |
---|---|
Imprint: | Zurich, Switzerland : TTP, 2014. ©2014 |
Description: | 1 online resource (751 pages) : illustrations (some color), graphs, tables |
Language: | English |
Series: | Materials Science Forum, 1662-9752 ; Volume 798-799 Materials science forum ; v. 798-799. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11277373 |
Table of Contents:
- Characterization of a Limestone Powder Residue for Recycling as a Concrete Block Incorporation
- Comparative Study of Organoclays with Ionic Surfactant
- Study of a Clayey Soil Used in the Fabrication of Red Ceramics in Campos Dos Goytacazes, Brazil
- Purified Smectite Clays Organofilized with Ionic Surfactant for Use in Oil-Based Drilling Fluids
- Improvement of Rheological Properties of Little Noble Varieties from Boa Vista Bentonites - Part I: Experimental Design
- Characterization of Natural Slip Materials Geologically Found in the North of the State of Rio de Janeiro, Brazil
- Reactive Formations: Characterization and Capacity Expansion
- Use of Construction Waste to the Mass Manufacture of Clay Products
- Bentonite Clays from Sossego, Paraiba, Brazil: Physical and Mineralogical Characterization
- Influence of Hydrocycloning Pressure on the Purification of Bentonite
- Sinthesys of Mullite Using Microwave Furnace from Kaolin and Alumina Residue
- Silver-Doped Zirconia Nanoparticles as Possible Bactericide in Water Filters
- Influence of Oxidizing Atmosphere on Crystalline Phase Formation and Microstructural Properties of Mixed Cerium-Zinc Oxides Obtained by Polymeric Precursor Method
- Experimental Planning of Mixtures to Obtain Geopolymer
- Characterization of Al2(WO4)3 Synthesized by Co-Precipitation Method
- Low Temperature Phase Transformation Study in the Al2O3-Y2O3-Nb2O5 System
- Use Residue of Bagasse Sugar Canein Synthesis of Molecular Sieve MCM-41
- Synthesis and Characterization of Molecular Sieve SBA-15 and Catalysts Co/SBA-15 and Ru/Co/SBA-15
- Influence of Clay Content and Surfactant on the Rheology of Non Aqueous Drilling Fluids
- Synthesis of Nanostructured PZT Ceramics with Powder Obtained from Coprecipitate Method
- SBA-15 Molecular Sieve Using Clay as Silicon Sources
- Study of Organic Surfactant Sorption in Organophilic Clays
- Evaluation of a Sodic Organoclay as Adsorbent for Removing Oil/Water in a Synthetic Wastewater
- Influence of the Citric Acid and Metal Cation Ratio on the Structural and Morphological Characteristics of Aluminum Oxide Synthesized by Pechini Method
- Effect of Calcination Temperature in the Aluminum Oxide Synthesized by Pechini Method in the Citric Acid: Metal Cation Ratio of 2:1
- Polycrystalline Tetragonal Zirconia of the Form ZrO2: 3 mol% Re2O3 (Re-TZP) for Use in Oxygen Sensors: Synthesis, Characterization and Ionic Conductivity
- Sintering Sr2MgWO6 Ceramic and their Reactivity to Petroleum
- Microstructural and Colour Analysis of CuCrO2 Delafossite Obtained by Gelatin Method
- Synthesis, Characterization and Ionic Conductivity of Fully Stabilized Zirconia Obtained from Core-Shell Type Structures
- Synthesis and Characterization of Zirconium Oxide Systems with Yttrium Rich Rare Earth Concentrate Additives
- Synthesis of Gadolinium Doped Ceria Ceramic Powder by Polymeric Precursor Method (Pechini)
- Preparation of Mullite Whiskers from Powder of Topaz Pure and Doped with Rare Earths
- Effect of LiF and CaO Additions on MgAl2O4 Dynamic Behavior
- Effects of the Addition of Ions Barium on the Structural and Electrical Properties of PZT Ceramic
- Nanostructured Co3O4 Oxide for Low Temperature Ethanol Oxidation
- Effect of the Iron Doping on the Thermal Decomposition of the Polymeric Precursor for the Titanium Dioxide Powder Synthesis
- Microstructural Analysis of Clay Ceramic Added with Argillite and Grog
- Study on the Viability of Using Drill Cuttings from the Potiguar Basin in the Production of Ceramic Products: Influence of Concentration and Firing Temperature
- Effect of Banana Fiber in the Properties of Clayey Ceramic
- Addition of Grog-Clay Ceramic Waste in Multiple Use Mortar
- The Incorporation of the Ceramic Industry Firewood Ash into Clayey Ceramic
- Banana Aqueous Extract as a Potential Addition to Clay Ceramics
- Microstuctural Evaluation of a Clay Ceramic Incorporated with Granite Rejects from Stone Sawing Using Diamond Wire
- Degradation of Red Ceramic with Incorporated of Petroleum Waste
- Red Ceramic with Addition of Petroleum Coke
- Resistance to Synthetic Seawater Aggression of Clay Ceramics Incorporated with an Ornamental Stone Residue
- Study of Ceramic Block Manufacture with the Addition of Waste from Iron Ore Extraction
- The Influence of Sintering Temperature on Ceramic Material with Addition of Mill Scale
- Total and Partial Replacement of Quartz in Aluminum Hydroxides Porcelain Formulations
- Study of the Effect of Feldspar Replacement from a Mixture of Glass / Syenite in Technological Properties of Ceramic Coatings
- Characterization of Ceramic Composite Waste of Granite, Marble and Caulim for Production of Coating Plates
- Analysis of Color of the Ceramic Coatings Submitted to Different Processing Conditions
- Ceramic Tiles with Photovoltaic Properties
- Reuse of Waste from Polish in the Production of Porcelain
- Phases Obtained from Heat Treatment of Mn-Co-Based Coatings Deposited by Dip Coating
- Formation of Spinel from Fe-Ni Coating Electrodeposited on AISI 430 Ferritic Stainless Steel
- Morphology and Fluidity of Spray-Dried Powder Transported by Compressed Air
- Processing and Properties of Soil-Cement Blocks Incorporated with Natural Grit
- Technical Feasibility of Using Lightweight Concrete with Expanded Polystyrene in Civil Construction
- Characterization and Granulometric Correction Soil for the Production of Soil-Cement Blocks for Two Method, Particle Size and X-Ray Florescence to be Inserted in Phase Change Materials (PCMS)
- Evaluation of Pozzolanic Activity of Siliceous Materials Using the Method of Variation of Conductivity in Lime Solution
- Properties of Glass-Ceramics Obtained from Crystallization of the SiO2-Al2O3-MgO-Li2O System with Addition of ZrO2
- Study of Bubbles Elimination in Silica Glass Produced by Flame Fusion from Brazilian Natural Quartz Powder
- Development and Characterization of the Al2O3-YAG Ceramic Composites
- Preparation of Porous Zirconia-Yttria Ceramics by Thermal Removal of Potassium Iodide
- Synthesis by Combustion Reaction of the System Zn0,6Fe0,4O for Application as DMS: Avaliation of the Type of Container
- Magnetic Study of Nanoferritas CoFe2O4 Obtained by Reaction of Combustion
- Characterization of Yttrium-Doped Barium Zirconate Nanocrystalline Powder Prepared by Spray Pyrolysis
- Microstructure and Electrical Conductivity of Yttria-Stabilized Zirconia with Lithium Addition
- Calcination Temperature Influence on Ionic Conductivity of Solid Electrolytes
- Morphological Characterization by SEM, TEM and AFM of Nanoparticles and Functional Nanocomposites Based on Natural Rubber Filled with Oxide Nanopowders
- Application of Design of Experiments to the Alkaline Treatment in Mordenite Zeolite: Influence on Si/Al Ratio
- Synthesis and Characterization of Hydrated Calcium Phosphate: Precursors for Obtaining Biocements
- Synthesis and Characterization of Calcium Phosphate from Fossilized Calcareous Shells for Biomedical Applications
- Mechanical Characterization of Tricalcium Phosphate Ceramics Doped with Magnesium
- Preparation and Characterization of Hybrid Fe3O4/APTES for Immobilization of GOX
- Effect of the Mg2+ Substitution on the Sintering Behavior and Compressive Strength of Doped #914;-TCP/CPP Ceramics
- Titanium Substrate Surfaces Coated with Hydroxyapatite by Magnetron Sputtering
- A Study on Public Opinion of Structural Concrete Blocks Incorporated with Ornamental Stone Residue
- Incorporation of Global Blast Furnace Sludge into Clayey Ceramic
- Coarse Aggregates Obtained from Red Mud via Pelletizing Process
- Incorporation of Fired Ceramic Waste into Binary and Ternary Earth-Binder (S) Mixtures for Compressed Blocks
- Evaluation of Industrial Rejects of Mineral and Metallurgical Processing as Ceramic Synthetic Proppants
- Properties of Clay Ceramic Incorporated with Red Mud
- Characterization of a Red Mud and a Clay Body for Ceramic Fabrication
- Modification of Sodium Bentonitic Clay Used in Zinc Ion Adsorption
- Influence of Firing Temperature on the Behavior of Clay Ceramics Incorporated with Elephant Grass Ash
- Evaluation of Co and CO2 Emitted in the Firing of Clay Ceramics Incorporated with Elephant Grass Ash
- Use of Ceramic Membrane for Indigo Separation in Effluent from Textile Industry
- Study of the Influence of Granite Residue in Different Compositions to Prepare Ceramic Membranes
- Environmental Durability of Soil-Cement Block Incorporated with Ornamental Stone Waste
- Study of Mechanical Properties and Development of Concrete Using Sludge from Textile Industry
- Characterization of Spectrogel Organoclay Used to Adsorption of Petroleum Derivatives
- Evaluation of Agents Abrasives Polishing Porcelain Employing Image Processing
- Evaluation of the Reuse of Waste from the Polish Porcelain in the Development of Ceramic Products with Better Thermal Comfort
- Influence of Waste Glass on the Physical Properties of Portland Cement Concrete
- Study and Characterization of Chocolate B Clay on Adsorption of Heavy Metals (Lead and Zinc) in Bath Finite System
- Recycling of Automotive Laminated Waste Glass in Ceramic
- Evaluation of the Addition of Electric Arc Furnace Dust in Hot Metal Changind the Type of the Crucible
- Bottom Ash from Mineral Coal as Aggregatein Mixtures for Ceramic Products
- Characterization of Converter Refractories for Recycling
- Characterization of BOF Dust for Pellets Production Used in Blast Furnace
- Production of Zeolite from Rice Husk Ash
- Potential Evaluation of Gray Clay as Adsorbent of Heavy Metals Zinc (II) and Lead (II)
- Use of Glass Particles from Recovered LCD Screen Components as Fillers for Polyamide-6
- Reuse of ZrO2(Y2O3) Arising from Making Dental Implant - Characterization of Materials
- Relevance of Ornamental Stone Residues in the Manufacture of Concrete Blocks for Structural Masonry
- Evaluation of the Thermic Behavior of the Coal as a Byproduct through the Low Temperature Conversion Process - LTC of the Sewage Sludge
- Organic Binder Burnout in Alumina Processing
- Study of the Interaction between Particles of Bentonite: Use of Dispersant Additives
- Processing and Properties of Niobia-Doped Alumina Sintered at 1400oC
- Porosity and Delamination Defect Detection in Ceramic Materials by Active Infrared Thermography and Optical Digital Microscopy
- Effect of Milling Medium on Alumina Additivated with Niobia
- Hybrid Membranes Development Made by Chitosan and Calcium Phosphate
- Yttria Nettings by Replica Processing
- Comparative Study of Solid-Phase and Liquid-Phase Assisted Sintering of Nb2O5-Doped Alumina
- Influence of Addition of Polysiloxane on Sintering of Al2O3
- Synthesis of Strontium Titanate Nanoparticles by Ultrasonic Irradiation
- Analysis of the Mechanical Behavior of Ceramic Filters of the Systems Al2O3-LZSA and Al2O3-SiC
- The Influence of Microstructures of Ceramics on the Monitoring of Environmental Humidity
- Compaction of ZrO2(Y2O3) Powders with Different Particle Sizes and Effects on the Sintering
- Rice Husk Ash Impregnated with Silver Nanoparticles for Water Purification
- Nanoparticles Prepared by Sol-Gel Method Used in Pseudoboehmite-Reinforced Nylon 6.12 Nanocomposites
- Evaluation of the Influence of a Smectite Clay in PP Composites
- Effect of the Addition of a Brazilian Sodium Smectite Clay in Toughened Nylon-6