Advanced materials and processes : selected papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) 16-18 September, 2011, Guangzhou, China /
Saved in:
| Meeting name: | International Conference on Advanced Design and Manufacturing Engineering (2011 : Guangzhou, China) |
|---|---|
| Imprint: | Durnten-Zurich : Trans Tech Publications, Ltd., 2011. |
| Description: | 1 online resource. |
| Language: | English |
| Series: | Advanced materials research, 1022-6680 ; v. 311-313 |
| Subject: | Production engineering -- Technological innovations -- Congresses. Manufacturing processes -- Technological innovations -- Congresses. Manufacturing industries -- Technological innovations -- Congresses. TECHNOLOGY & ENGINEERING -- Engineering (General) TECHNOLOGY & ENGINEERING -- Reference. Manufacturing industries -- Technological innovations. Manufacturing processes -- Technological innovations. Production engineering -- Technological innovations. Electronic books. Electronic books. Conference papers and proceedings. |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11276196 |
Table of Contents:
- The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-TiC Particulate Reinforced Composites
- Surface Modification of Carbon Aerogels for LiFePO4 Composites
- Ultra-Light Photovoltaic Embedded Structures for Solar-Powered Aircrafts
- Preparation and Properties of PA66/PP/MOS Whisker Composites
- Fretting Tribology of Cu Matrix Composite Reinforced by In Situ Al2O3 Particle
- Adaptive Collaborative Optimization Strategy Based on Genetic Algorithm
- Studies on Low-Velocity Impact Damage of Metal Ion Implanted Composite Laminates
- Effect of Forging on Microstruture and Mechanical Properties of In Situ TiBw/Ti Composite
- Fabrication of MgAl2O4 Reinforced Aluminum Matrix Gradient Composites under High Frequency Magnetic Field
- Relationship Between Interfacial Shear Strength and Interfacial Tension of Silicone/Quartz Glass Fiber Composites
- Effect of Coupling Agent on Bonding Properties of Wood/Polyethylene Composites
- Al2O3/Al Composites Consolidated from Alumina and Aluminum Particulates by Reciprocating Extrusion
- Experimental Study of Energy Absorption Capability of Metallic-Palm Fiber-Metallic Hybrid Composite Plate
- Mechanical Behavior of Wood Plastic Composites: Effect of Interfacial Compatibilizers
- Synthesis of NiO@C Composites with Microwave Absorption Property
- High Strength Aluminum Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes
- Effect of TiC Addition and Cooling Rate on Mechanical Properties of 316L Stainless Steel Composites
- Wear Properties of High Volume Fraction SiCP/Mg Composites Produced by Vacuum Pressure Infiltration
- Friction and Wear Behavior of Polypropylene/Montmorillonite Intercalated Nanocomposites
- Synthesis and Characterization of Polyimide/Silica Nanocomposites
- Microstructure and Microwave Sintering Behavior of TiB2/Cu Composites
- Study on Properties of Ceramic-Lined Steel Pipes Prepared by Centrifugal Self-Propagating High-Temperature Synthesis
- Foundation of Service Life Prediction Model of Sulfate Attack in Concrete
- Preparation of Epoxy Resin Composites by Chitosan Modified Montmorillonite
- Development and Application of High-Valued Wood Products Made of Fast-Growing Poplar
- A New Preparation Method of Fe-WC Composite Ceramic Powder through Ball Milling
- Experiments of Infrared Thermography NDT in Composite Materials with Honeycomb Sandwich Structure
- Study on the Preparation, Structure and Performances of Antibacterial PET Masterbatch
- Synthesis and Infrared Emisstivity Properties of CdS/ZnS/Al Composite Material with Microemulsions
- Structure and Infrared Radiation Properties of Metal Oxides-Doped Cordierites Using Graded Sintering Synthesis
- Dynamic Response Analysis on Efficacy of CFG-Pile in Different Height Embankment
- Synthesis of Silver Nanoparticles by Using Bamboo Hemicellulose as Template in Aqueous Solution
- Finite Element Analysis and Experimental Verification on Mechanical Properties of Steel Mash Reinforced HDPE Composite Materials
- The Preparation of Aluminum-Bronze/Steel Duplex Metal by Loose Sintering
- Effect of Moisture Absorption on the Bending Strength of Carbon/Epoxy Composites with Voids
- Chinese Design Recommendations for External Strengthening by FRP Laminates and Related Works in ACI and ISIS Code Provisions
- Characterization of Wood-Polymer Composite prepared by Muchelia macclurei Wood and Methyl Methacrylate Monomer
- Research on Glass Fiber Bars of the Shear Property after High Temperature
- Discussion about Application of Composite Repair Technique in Pipeline Engineering
- Mechanical and Tribological Properties of Polyimide Composite Reinforced with Carbon Fibers and Carbon Nanotube
- Effect of Fiber Length on Mechanical Properties of Short Carbon Fiber Reinforced PTFE Composites
- Influence of Sb on Wear Resistance of In Situ Mg2Si/Al-Si Composites
- Research on Electrical Double Percolation of Carbon Black-Filled Cement-Based Composites
- Tensile Behavior of Textile Reinforced Flexible Composites with Single Edge Notch (SEN) under Static Solicitation
- Finite-Element Simulation of Residual Stress in Zirconia Thermal Barrier Coating
- Measurement of Transverse Permeability of Fabric Preforms Using Ultrasound Monitoring Technique in LCM Processes
- Based on the PB Neural Network of Optimization Design in Lubricant Additives
- Effects of Process on Electrochemical Properties of Pulse Electrodeposited Ti/Pb-WC-PANI Inert Electrodes
- Optimizing Design of a Balance Weight Unit for Compensating POS Unbalanced Moment in an Aerial 3-Axis ISP System
- Underwater Acoustic Radiation Prediction Based on Improved SEA Method and Hybrid FE-SEA Method
- Formation of the Intermetallic Layers in Ti-Al Multilayer Composites
- Experimental Study of Cutting Parameter for Drilling on Fabric Carbon/Epoxy Laminates
- Studies on Preparation and Properties of PVDF-g-PAMPS Membrane
- A Hybrid-Stabilized Solid Element for Piezoelectric Laminated Plate Analysis
- Analysis of Stresses for Cross-Ply Laminates with Multiple Matrix Cracks under Bending
- Mechanical Properties of Kenaf - Unsaturated Polyester Composites: Effect of Fiber Treatment and Fiber Length
- A Domain Ontology-Based Knowledge Organization Model for Complex Product Design
- Study on Properties of Carbon Particle Modified Silicon Carbide Composite Ceramics
- The Evolution of Heat Treatment on the Tensile Properties of Na-Modified Al-Mg2Si In Situ Composite
- Thermal Conductivity of the Diamond-Cu Composites with Chromium Addition
- Safety Investigation and Analysis for Highway Tunnel Entrance Pavement
- The Study of Power Ultrasonic Vibration Cutting Heat
- Study on Multi-Axial Mechanical Properties of a Polyurethane Foam and Experimental Verification
- Impact Analysis of Aluminum-Fibre Laminated Composite
- Reinforced Mineral Particles by Surface Coating
- Study on the Preparation of Ni-P-TiO2 Coatings by Electroless Plating and its Photocatalytic Properties
- Investigation of Phase Composition and Microstructure of the FeAl/Al2O3 Composites Fabricated by Mechanical Alloying and Hot-Pressing Process
- Complexing Agent on the Surface of Magnesium Alloy Plating of Ni-B Alloy
- Preparation and Basic Properties of Three-Ply Kevlar Fiber/Epoxy Composites
- Preparation and Properties of Polyvinyl Chloride/Nitrile Butadiene Rubber/Barium Sulfate Composites
- Modified Singh-Mitchell Creep Model for EPS Composite Soil
- Preparation and Study of Novel Nano-Composite Coatings on the Surface of Plastic Moulds
- Ethanol Sensing Properties of Tungsten Oxide Nanocubes Prepared by a Urea-Assisted Hydrothermal Method
- Modal Analysis Theories and Methods for Bridge
- A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism#65306;Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals
- Electrochemical Synthesis and Characterization of NiFe/Au Multisegmented Nanowires
- Preparation and Performance Testing of Chitosan-Ibuprofen Sustained Release Microspheres
- Direct Synthesis of Yttria-Stabilized Zirconia Nanopowder by Thermal Decomposition
- Performance Study of Aerostatic Bearings with Arrayed Microhole Restrictors
- Thermodynamic Analysis of the Extension of Solid Solubility of the Cu-Cr System Processed by Mechanical Alloying
- Experiment Study on a Novel Foam System for Enhanced Oil Recovery
- Design of Sample Holders for Soil Experiments Using THz Spectroscopy
- Visible Light Photocatalytic Activity of Zn-Doped Bi-Mo Complex Metal Oxide Prepared by Hydrothermal Synthesis Method
- Performance of Vanadium Oxide on Multi-Walled Carbon Nanotubes/Titanium Electrode for Supercapacitor Application
- Effects of Irradiation on Chitosan-Coated Nanoparticles for Hyperthermia
- Catalytic Combustion of Toluene on Cu-Mn Complex Oxides Prepared by Urea-Based Hydrothermal Method
- Rapid Detection of Shellfish Major Allergen Tropomyosin Using Superparamagnetic Nanoparticle-Based Lateral Flow Immunoassay
- Influence of Oxygen Donor Alcohols on Non-Hydrolytic Sol-Gel Synthesis of MgAl2O4 Spinel Nanoparticles
- Study on the Relation between Electrospinning Fiber Diameter Distribution and Taylor Cone Dynamics
- Structure and Tensile Properties of Nano-Filament Knitted Fabrics by Alkali Treatment
- Synthesis of Self-Assembly Au Nano-Particles Based on Sodium Citrate-Tannin Reduction Method
- The Study of Shrink Fit Design Empirical Formula
- High Performance Cu-Based Friction Material Reinforced by Nanometer Materials
- Hydrothermal Synthesis and Electrocatalytic Property for H2O2 Reduction of Co3O4 Nanocubes
- Electrochemical Polymerization and Characterization of Poly(3-Methylthiophene) in Pure Ionic Liquids
- Fabrication of Nanosheets and Micro-Spheres from the Self-Assembly and Polymerization of N-Octadecyltrichlorosilane
- Determination of Optimal Cold Reduction Ratio and Annealing Process of High Plastic Stain Ratio Structural Cold Rolling Steel Sheets
- Preparation and Test of Hierarchical #945;-Ni(OH)2 Flowers and Spheres
- Growth of Nanostructure on Cu0.62Zn0.38 after SMAT during Thermal Oxidation
- Study on Application of Nanosilica in Paper Coating
- The Influence of Tin Ions on the Thermal Property of #946;-FeOOH Nanorods
- Constitutive Modeling of Nanocrystalline Materials with Shear Band
- Effect of Grain Rotation on the Strain-Softening Behavior in Nanocrystalline Materials
- Dispersion Investigation on Cobalt Blue in Organic Solvent
- First-Principles Study of Triangle Terarylene as a Possible Optical Molecular Switch
- The Changes of Hysteresis for Nanocrystalline BaTiO3 Ceramics at Different Impressing Rate of Voltage
- Preparation of Microfibers with Multi-Hollow Structure by Co-Electrospinning
- Synthesis of Hierarchically Porous ZSM-5 by Solvent-Evaporation Route
- Low-Temperature Molten Salt Synthesis of NiWO4 Nanoparticles
- Research on Preparation, Characterization of Novel Nano-ZnO
- Finite Element Simulations of Crack Initiation in Ultra-Fined Polycrystalline under Cyclic Deformation
- Comparative Study of Physicochemical Properties of Dragon's Blood Powders
- Study on Hydrothermal Synthesis of Flower-Sphere MoS2
- Synthesis and Characterization of Polyacrylonitrile Microspheres by Soapless Emulsion Polymerization
- Seed-Mediated Synthesis of one-Dimensional Fe3O4 Particles under Magnetic Field
- Effects of Strain Rate and Heat Treatment on the Tensile Property of 1Mn1Zn4Y Magnesium Alloy
- Compressive Flow Behavior of AZ61 Mg Alloy at Elevated Temperatures
- Effects of Element Yttrium on the Microstructure and Mechanical Properties of as-Cast Zn-25Al-5Mg-2.5Si Alloy
- Rheological Constitutive Model Depending upon Temperature and Strain Rate of Sheet TC1 Titanium Alloy
- Effect of Rotating Magnetic Field on Microstructure Evolution of Pb-Bi Alloys
- Effects of Annealing Technique on Texture Attenuation of Hot-Rolling AZ31 Magnesium Alloy Sheets
- Failure Analysis on Tee Joint Crack of Subcritical Power Station Boiler Final Superheater Header
- A Study on the SCC Susceptibility of Twin-Wire Metal Inert Gas Arc Welds in 7A52 Al Alloy Plate
- Study on CPM9V High Speed Steel Ring Prepared by Spray Forming
- Oxidation and Melting Characterizations of AZ91D Granules during In Situ Melting
- Influence of SiC Particle Size on the Wear Properties of SiC/Cu Composites
- Study on the Super-Plastic Property of ECAPed Magmesium Alloy
- Research of Aluminum Reduction Cell Thermal Balanced Intelligent Control System
- Effects of Solidification Time on Porosity Content in A201 Aluminum Alloy Castings
- An Investigation on a New Type of Fe-Ni Alloy in MIM Process
- The Effect of PH on the Efficiency of Isoniazid as Corrosion Inhibitors of Brass in 3.0% NaCl Solution
- High Temperature Salt-Fog Corrosion Behavior of a Ni-Based Super Alloy
- Microstructure Refinement by Y2O3 in Semisolid A356 Alloy
- Microstructure and Properties of Zn-Al Filler Metal Brazing Cu/Al Joint
- Investigation of Gas Nitriding on Wear and Corrosion Behavior of 40Cr Steel
- Smelting of Al-Li Alloy Containing High Li by Micro-Gravity Electromagnetic Force Simulation Facilities and Texture Study
- Modeling of Cyclic Super-Elastic Behaviors of Shape Memory Alloy
- Hot Deformation Microstructure and Mechanical Properties of Mg-Zn-Nd-Cd-Zr Alloy
- Microstructures and Mechanical Properties of Mg-Al-Zn-Y Alloys
- Effect of Cladding Material on Residual Stress in Quenched Aluminum Alloy Plate
- Preparation of Semisolid A356 Al Alloy Slurry by Low Superheat Pouring and Weak Traveling-Wave Electromagnetic Stirring
- Influence of Different Titanium Alloying Methods on the Microstructure and Wear Behavior of ZL108 Alloy
- Modeling of Flow Stress for one New Kind of Metastable #946; Titanium Alloy at High Temperature
- Experiment Study on Disrepair Principle for the Waved-Edge Milling Insert with Complex 3D Grooves
- Modeling and Experimental Study on Static Characteristic of BT Tool Holder-Spindle Interface
- Oxidation Resistance of Co-10Cr-5Si Alloys in 1 Atm of Pure O2 at 700 and 800 OC
- Regression Analysis and Determination of Activity Coefficients of Cd-Pb Alloy
- Determination of Phase Transformation Point of New Type Ti-5Al-3.3V-8Mo-10Nb-1.0Zr-0.5Cr Alloy
- Research and Implementation on Variant Design Based on Product Assembly Model
- The Solute Redistribution during Solidification of Multi-Component Alloys
- Calculation of Valence Electron Structure of Precipitate Phases in Al-Cu Cast Alloy
- Negative Thermal Expansion of Tm2Fe15SiCr Compound
- Modeling and Error Compensation of MEMS Gyroscope Dynamic Output Data within the Whole Temperature Range
- Evolution of Microstructures and Mechanical Properties of Sr and Ca Containing Mg-4Al Alloy during Annealing Heat Treatment
- Study on the Similar Creep Behaviors and Mathematical Laws of 1Cr18Ni9Ti under Low Stress Repeated Impact
- The Study on Microstructure and Properties of a New Metastable Beta Titanium Alloy after Aging Treatment
- An Adaptive Changeability Approach of Flow Path Feature in Hydraulic Manifold Blocks Design
- Influence of Precipitate Phase on the Strain Rate Sensitivity of Mg-Gd-Y Alloy
- Electrochemical Preparation of Ce-Mg-Ni Alloy Film in Acetamide-Urea-NaBr Melting System
- Research on Corrosion Behavior of Fe-B Eutectic Alloy in Liquid Zinc
- Distortion Analysis on Multipassed Butt Weld Using FEM and Experimental Study
- Influence of Nitrogen Content on the Microstructure and Precipitate of the Medium-Carbon Vanadium Microalloyed Steel
- Comparison of Crack Growth Models and Crack Closure Effect
- Puncture Needle Production Process Intelligent Control System Based on Machine Vision
- Study on Relationship of Abnormal Heat Treatment, Microstructure and Properties of P91 Steel
- Effect of Rare Earth Elements on Corrosion Behavior of Low Carbon Steel in CSP
- Effect of Prestrain on the Fatigue Crack Initiation life of X60 Pipeline Steel
- Influence of Rapid Cooling Temperature on the Microstructure and the Mechanical Properties of a High Al Dual Phase Steel
- Sintering Pot Test on Improving TiO2-Containing Ore's Allocated Proportion
- The Improvement of 13MnNiMoNbR Weld Strength and Low Temperature Toughness
- Effect of Vanadium and Niobium on the Microstructure of Carbide Reinforced Indefinite Chilled Cast Rolls
- Casting Low-Carbon Alkaline Agent of Tundish
- Corrosion Study on X70-Carbon Steel Material Influenced by Soil Engineering Properties
- Study on the Cleanliness of 316L Stainless Steel
- Influence of Cooling Rate on the Microstructure of Bainitic Steel
- Experimental Research on the Novel Process of Iron Ore Direct Reduction by Coal Gas
- Research on Industrial Shape Meter and its Application
- Shape Detecting and Shape Control of Cold Rolling Strip
- Stress Field Numerical Simulation of the Inclusions in Large Rudder Arm Steel Casting
- Microstructure Evolution and Precipitation Behavior of a High Nitrogen 15Cr Martensitic Stainless Steel during Tempering
- A Study on Modified Maximum Force Criterion to Predict Forming Limit Curve of Stainless Steel Sheet
- Two-Section Model for Adsorption of Tinidazole on Carbon Steel Surface in 3%HCl Solution
- Mechanism of Work Hardening of Mn13 after Conventional Cold Rolling
- Effect of Vanadium on Microstructure and Mechanical Properties of Air Cooled Medium Carbon High Silicon Bainite Steels
- Research on Thermal Stress of Slab Heating Process Based on Transient Non-Linear Analysis
- Influence of Annealing Temperature on Properties and Texture of High Strength IF Steel
- The Effect of Co and Cu on the Creep Properties of High Chromium (12%Cr) Ferritic Steel
- Effect of Nitrogen on the Impact Toughness of the Bearing Steel GCr15
- Research on Temperature Changes and Microstructure Evolution of Steel Target after the Penetration by Copper Jet
- Corroded Behavior of 310S Stainless Steel in Molten Al-Si Eutectic Alloy
- Effect of Additives on Desulfurization Capability of CAS-OB Refining Ladle Slag
- Comparison of Effects of B2O3 and CaF2 on Metallurgical Properties of High Basicity CaO-Based Flux
- Fracture Images Classification Based on Fractional Cosine Transform and Markov Mode
- The Effect of Quenching Media on the Microstructure and Mechanical Properties of SA508-3 Steel
- Geometric Errors Sensitivity Analysis of Precision Vertical Machining Center Based on Multi-Body System Theory
- Consistency Maintenance of Collaborative Product Design Based on the Semantics Reasoning
- Exploration of Environmental Education on Campus-Huanggang River Watershed Protection in Case
- Effects of Temperature on Corrosion Behavior of X70 Steel in Halons
- Research on Product Knowledge Manipulation in KBE Application for Improving Product Design
- Effect of Chemical Composition on Quenching Hardness of 1Cr17Ni2 Stainless Steel
- Experimental Investigation of Static Characteristics of a Vacuum Preloaded Aerostatic Bearing
- Study on the Interaction of Rare Earth (La) and Strontium with Titanium and Boron in the Al-Ti-B Based Master Alloy
- Studying the Structure and Semiconductor Properties of Passive Film on 316SS by XPS and Capacitance Measurement
- On the Dynamics of the Micro-Ring Driven by Traveling Bias Voltages
- Formation Conditions for Ce2O2S and CeAlO3 in Cerium Treated Al-Killed Steels
- Study of Thermal Stress of Iron-Boron Alloy Casing
- Application and Study of Reactive Polyacrylate Microgel in Pigment Paint of Printed Fabric
- Research on Some Key Issues of Dynamic Simulation for Workflow Process
- Preparation and Properties of Rigid Cross-Linked PVC Foam
- Selenium-Containing Curcumin Polymer for Anti-Liver Fibrosis
- Studies on Thermal Stability and Rheological Property of PU/PVDF Blend
- Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive
- Adsorption Performance for Ag(#1030;) of an Ethoxycarbonyl Thiourea Chelating Resin
- Effect of Temperature and Frequency on Dynamic Mechanical Properties of Poly(Methyl Methacrylate)
- Synthesis and Properties of Waterborne UV Polyurethane
- The Residual Stress Research of Rolling Slab Based on the No-Linear Elastic and Plastic Analysis
- Investigation of Application Conditions of Barium/Strontium Scale Inhibitor in Oilfields
- Structure Design and Properties of Porous PVDF Membranes Based on Ionic Liquid
- Research on the Modification of Poly(L-Lactic Acid) by Glucose via Direct Melt Polycondensation
- Analysis of Entrance Converging Flow of Polymer Melts. A Comparison between Liang Model and Cogswell Model
- Effects of Vibration Force Field on Extensional Stress of Polymer Melt in Contraction Die
- Improvement of Feeding Mechanism of Printing Machine
- Synthesis of a Novel Cationic Polyacrylamide and Its Application in Flocculation
- The Effect of Content of Castor Oil on Two-Component Castor Oil Based Polyurethane Adhesive
- Characterization on Aggregating Structure of Aloe Extract Crosslinked Cotton Fabric
- Rubber Modified Asphalt Storage Stabilizer Option
- Design of Floating HPMC Matrix Tablets: Effect of Formulation Variables on Floating Properties and Drug Release
- Properties of Polycrystalline BaTi2O5 Substituted with MgO Prepared by a Floating Zone Method
- Relationship between Technics and Properties during PAN Precursors Formation Process
- Remove Rhodium Catalysts from HNBR Solution
- Study on Viscosity of Poly(Acrylic Acid-Co-Acrylamide) Concentrated Solution with Different Potential Crosslinking Agent
- Synthesis of ABC Star-Shaped Copolymers via a Combination of Controlled Polymerization Techniques
- Data-Compensation Based Dynamic Robust Design for Partially Unknown System
- Study on Preparation of NR/BR Table Tennis Bat Rubber
- Comparison of the Friction and Wear Properties of PTFE Coatings under Vacuum Conditions before and after Gamma Irradiation
- Research on the Influence of the Road-Friendliness by Semi-Active Suspension
- A Research on Modification of Paper-Based Functional Polyurethane Material
- Research on Polymerization Processes of Cationic Polyacrylate Emulsion and its Optimization
- Safety Design of Ammunition Screw Dismantlement Based on Temperature Control
- Knowledge Based Plastic Mold Cavity Design and Manufacturing System
- Effects of Annealing Treatment and Buffer Layer on Properties of ZnMgO Films Prepared on Diamond Substrates
- Properties of CdMnTe Single Crystal Used in Nuclear Radiation Detectors
- Application of Three-Dimensional Fluorescence Spectrum Method and PARAFAC in Petroleum Pollutant Measurement and Identification
- Significant Suppression of Photoluminescence in Eu3+ Doped LaPO4 Inverse Opal Photonic Crystals
- A Novel Blue-Emitting Phosphor MgAl(PO4)O: Eu2+ for White LEDs
- Preparation and Upconversion Luminescence Properties of Tb3+-Yb3+ Co-Doped Phosphate Inverse Opals
- Experimental Study on Temperature External-Characteristics of Ni-Mn-Ga Shape Memory Alloy
- Effect of Seed Layers Prepared by Vertical Deposition Method on the Growth and Properties of Oriented Polycrystalline #945;-HgI2 Films
- Magnetic Properties and Structures of HDDR Nd2Fe14B-Based Magnet
- Expanded Graphite/Carbon Nanotube as Counter Electrode for DSSCs
- Effect of Bi2O3 Addition on the Physical and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3 -( Na0.5Bi0.5)TiO3 Ceramics
- Optimal Design of Inlet Structure of High-Pressure Tubular Reactor Jacket
- Research on Annealing Temperature of SiO2 on Si Substrate
- The Synthesis and Characterization of SrTiO3 Film Fabricated by Micro Arcoxidation
- The Study on the Structural and Optical Properties of C-F Codoped Zinc Oxide from Ab Initio Calculations
- Effect of Thickness on the Structural, Electrical and Optical Properties of ZnO Films Deposited by MBE
- Preparation and Properties of N-ZnS Film/P-Si Heterojunction
- Effect of High-Energy Ball Milling on Microstructure and Microwave Absorbing Properties of NdFe Material
- Synthesis and Optical Properties of 2-(1H-Imidazo [4,5-] Phenazin-2-yl) Phenol Derivatives
- Milling Force Predicting Modeling and Analysis for Helical Tooth End Mill on Inside Corner
- Synthesis of Single-Phase Nanocrystalline YIG by Co-Precipitation: The Influence of pH Value of Precursor Solution and Calcinating
- Design and Analysis of One-Dimensional Nanostructure on Amorous Silicon Solar Cell for Surface Reflectance Reduction
- Study of Dynamic Characteristic of Friendship Avenue Bridge
- Calcium Lanthanum Permanent Magnetic Ferrite Coupled with Soft Magnetic Ferrite
- ESPI for the Piezoelectric Constant Measurement
- Research on the Hydrology Telemetry System of Poyang Lake Based on GPRS
- Thermally Induced Pitch Gradients in Side-Chain Cholesteric Liquid Crystalline Polymers
- Synthesis and Photoluminescence Properties of the Novel Red Phosphor Gd2MoB2O9: Eu
- Nucleation Agent Choice of Li2O-Al2O3-SiO2 Glass Ceramic Having Ideal Micro Spherical Crystal Grains
- The Design of Electroporation Device Based on Dielectrophoresis with its Application on the Control of Monoplast
- The Effects of Magnetic Field on the Deposited Performance of CrN Films by Magnetron Sputtering
- The Study of Hydrogen Sorption Properties of Mg17Al12La0.45
- Test Method of Fiber Optic Gyroscope Based on Allan Variance
- Electro-Oxidation of Ethanol on the Preparation of Electroless Ni-P Alloy Electrode
- High-Temperature Performance of Amorphous Nickel Hydroxide Coated with La(OH)3
- Research on FEA and Optimizing for Structural Design of Pipelayer' Boom
- Investigation on Structure and Electrochemical Properties of MgNi+x%B (x=0,2,5,10) Hydrogen Storage Alloys
- Multi-Objective Optimization Design of Complex Mechanical and Electrical Products Based on Improved Evolutionary Algorithm
- Preparation Development of High-Quality Solar-Grade Multi-Crystalline Silicon by Directional Solidification
- A Study on the Electrochemical Properties of LiFePO4 Doping with Different Diameter MWCNTs
- Study on the Pair's Characteristics of Web Press's Fold System in High Speed
- Distribution of NiO/Al2O3/NiAl2O4 in the Fabrication of Spray-Dry Oxygen Carrier Particles for Chemical-Looping Combustion
- Traction Transmission Gearbox Mechanical Properties Numerical Calculation and Strength Analysis
- Design of Holmium Laser Treatment Instrument Control System
- Research on Electrochemical Properties of Alpha-Ni(OH)2 Prepared by Electrodeposition Method in the Ethanol and Water System
- Synthesis, Characterization and Performance of Ce0.8La0.2O1.9-ATP Composite Catalyst for Phenol Catalytic Oxidation
- Application of Irradiation Process for Surface Grafting and Copper Removal
- Smooth B-Spline Curves Extension with Ordered Points Constraint
- Preparation of Activated Carbon Supported Nano-TiO2 Photocatalyst Material and its Application in Papermaking Midcourse Wastewater
- Study on Thermal-UV Curing Process of Waterborne Dual Crosslinkable Coating Material
- Effect of Ti on Corrosion of Cast AZ91 Magnesium Alloy
- A Visual Tracing Control Platform Based on Multi-Axis Linear Drive
- Application of Error Design Idea to Deal with the Shafting Error of Photoelectric Theodolite
- Modeling and Analysis of the Transmission Characteristics of a Geared Linkage Mechanism
- Dielectric Properties and Diffuse Phase Transition of Sol-Gel Derived 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 Ceramics
- The Simulation and Experimental Research on Gas Cooler of the CO2 Trans-Critical Cycle
- A Double Imprinted Organic-Inorganic Hybrid Sorbent for Selective Separation of Lead from Aqueous Solution
- Recycling of Thermosetting Epoxy Molding Compound Waste into PVC Composites: Effect of Silane Coupling Agent on Morphology and Physical Properties
- Detection of Infected Tephritidae Citrus Fruit Based on Hyperspectral Imaging and Two-Band Ratio Algorithm
- Study on the Effect of Curing Conditions on Hydrate Properties of Fluorgypsum by Semi-Dry Pressing
- Utilization of Desulfurized Ash as a Modifier in Fluoride Retention and Deacidification of Fluorgypsum
- Lignin Separation and Antioxidant Capacity from Acanthopanax senticosus Remainders Using Acetic Acid-Water System
- Environment-Friendly Cottonseed Protein Bioplastics: Preparation and Properties
- Removal of Formaldehyde Using the Aminated Activated Carbon by Etilenodiamina
- Studies on Burning Process of Clinker Used for Corrosion-Resisting Cementitious Material in Fill Mining
- Kinetics of the Adsorption for Naphthol Green by Epichlorohydrin Modified Peanut Shell
- Fabrication and Properties of Lignin/Castor Oil-Based Composites
- A Hybrid Interaction Method with Virtual Hand
- Design of New Condition Monitoring System and Data Analysis in Large Forging Die Hydraulic Press
- Study on the Coexistence of Porous Ecological Concrete with Plants
- The High-Temperature Corrosion of Fe-Cr-Mo Alloy by Co-Firing of Coal and Biomass
- Research of Wheat Precision Seeding Test System Based on Image Processing
- The Optimization Design of New Type F-Nail Nailing Machine
- Research of Chinese Buddhist Temples Space Design
- Research on Process and Pollution of Atmospheric and Vacuum Distillation
- Punching Force of Cold Die of Fuzzy Reliability Considering the Random Distribution of Material Properties
- Using Cow Bone Char for Improvement of Domestic Water Quality in Chiang Mai, Thailand
- Evaluation on the Blast Resistance of Fiber Reinforced Concrete
- Robotic Cross-Lines Laser Indicator and Range Finder
- Study on Scattering of Left-Handed Materials Elliptical Cylinder
- Survey and Evaluation of Concrete Durability for 40 Sluices in Coastal Area, East China
- Response of Ultrasonic Wave Velocity to Wood Structure Defect of Korean Pine
- Study on the Adsorption of Copper Ions by Bentonite
- Synthesis of Hydroxyapatite Powder from Mollusc Shell
- Herbal-Loaded Multifunctional Nanocomposities as Nanocarrier for Cancer Therpy: Synthesis and Quality
- Preparation and Application of a Stable Biomembrane Mimetic Coating
- Study on Permeability Coefficient of Different Bamboo/Fir Veneer Surface
- Preparation and Characterization of PCL/PVP Blend Membrane
- Rate Optimization Congestion Control Protocol for Wireless Sensor Networks
- Investigation on Surface Crack of C38N2 Automobile Engine Crankshaft
- Effect of Concentration on Structure and Properties of Concentrated Regenerated Silk Fibroin Solution
- Design of a Reconfigurable Modular Underwater Vehicle
- A Powerful Discovery Procedure for Large-Scale Significance Testing, with Application to Comparative Microarray Experiments in Response to Different Biomaterials
- Design and Research on Mechanical Properities of New Type Low Modulus Biomedical Metastable #946; Titanium Alloy
- Energy Conservation Study during Abrasive Water Jet Cutting
- Error Correction of Theory Model in Process-Stress Accelerated Test
- Hydrothermal Synthesis of Hydroxyapatite Urchins and its Drug Release Property
- Bending Deformation Measurement of Bone Cantilever Using Image Correlation
- Study for Seeking Optimal Mix Proportion of Resin Concrete
- Fabrication of Polycaprolactone/Chitosan Scaffolds by Freeze-Solvent Extraction Method
- The Microstructure and Tensile Property of Mg-Zn-Ca-Zr Alloy Sheet Coated with HA and its Antihemolytic Ability
- Antioxidiation of Extract of Chinese Quince on Oil
- Preparation of Hydroxyapatite Powders via Neutralization Process
- Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method
- Modification Mechanism of the ZTA Ceramic Powders with Stearic Acid
- Preparation and Characterization of Bone-Like Apatite Coating on Ti6Al4V Spinal Fusion Devices
- Multiple Modifications on Carbon Fiber Surface and Effects on Microorganism Immobilization
- Microstructure, Mechanical Properties and Corrosion Behavior of Mg-1Zn-0.5Ca Alloy
- Effect of Size on Degradation of Porous Poly(Lactic Acid) Scaffold
- Preparation and Characterization of Silver/Hydroxyapatite Nanoparticles
- Preparation, Characterization and In Vitro Evaluation of IVM Loaded Poly(lactic-Co-Glycolic Acid) (PLGA) Microspheres
- Impact of Sterilization Methods on the Stability of Silk Fibroin Solution
- Influence of Chitosan on Electrospun PVA Nanofiber Mat
- A Study on Tensile Properties of NiCoCrAl/YSZ Multiscalar Microlaminate
- Investigation of Effect of Chemical Etching and Temperature on Optical Properties of Porous Silicon Layer
- Low-Temperature Ni Acetate Induced Crystallization of a-Si Thin Film by Microwave Annealing
- The Preparation, Texture and Electrodeposition Mechanism of Reticular MnO2 Catalytic Materials with High Porosity
- Study on Coloring Protective Composite Oxide Film on Aluminum Surface
- Si3N4 Double Passivation Methods for Optimizing the DC Properties in a Gamma-Gate AlGaN/GaN HEMT Using Plasma Enhanced Chemical Vapor Deposition
- Study on the Heat Sealable Property of Biaxially Oriented Polyester Film
- Surface Modification of PET Films by Vapor-Phase Photografting Acrylic Acid and its Application to Electroless Copper Plating
- Non-Uniform Simplification of Point Clouds
- Microstructure and Nanoindentation Hardness of Sputter Deposited Nanocrystalline Tantalum Thin Films
- Coating Technique's Application in the Improvement of Mechanical Behavior of Polyester Textile in Corrosive Environment
- Effect of Nano-Sized ZnO Particle Addition on PVDF Ultra#64257;ltration Membrane Performance
- Review of Working Performance Modeling and Optimization of Cone Crusher
- Stress Migration Induced Formation of Voids / Hillocks in Tungsten Films
- Effect of Airflow on Performance of Splicing Fiber under Different Chamber's Inlet Pressure
- Mechanical Properties of Concrete with Aggregate Type at Elevated Temperature
- Study on a Kind of Rust-Transforming Technology
- Synthesis of the Water-Compatible P-Aminophenol Resin and its Adsorption for Salicylic Acid
- Experimental Research on Effect of Hot Works on Mechanical Performance of Ship Steel Plate
- Skip Neighborhood Hybrid Particle Swarm Optimization Algorithm
- Research on Overconstrains of Planar Mechanisms
- Microstructure and Mechanical Properties of as-Forged Ti-47Al-2Cr-2Nb-Y Alloy
- Experimental Study and Performance Analysis of Concrete Shrinkage-Reducing Agents
- Static Performance Analysis on Combined Truss with Steel Tube and Concrete-Filled Steel Tube Based on Total Strain Crack Constitutive Model
- Finite Element Analysis on Static Performance on Combined Truss with Rectangular Steel Tube and Concrete-Filled Steel Tube
- Influence of Early Age Wet Curing Time, Clinker and CaO Content on the Carbonation Resistance of C40 Ordinary Concrete
- Effect of Isothermal Holding Parameters on the Solid Particles Evolution of Semisolid AZ91D Alloy Produced by SIMA
- The Influences of TiN Content on the Properties of the In Situ Al2O3-TiN Composites
- The Variables Reduction for Concrete Strength Prediction Model Using a Rough Sets Method
- Relationship between Thickness of Lamellar #945;+#946; Phase and Mechanical Properties of Titanium Alloy
- The Effect of Aluminum Clad on the Electrochemical Properties of the Similar Weld of Friction-Stir Welding of 2524
- Modeling of Pressure Drop in a 3-D Network Ceramic Diesel Particulate Filter
- Distribution Character of Structural Stress for Aluminum Alloy Thick Plate
- Prediction of the Tension Softening Curve of Dam Concrete Based on BP Neural Network
- Assesment of Main Models for Predicting Debonding Load-Bearing Capacity against Intermediate Crack-Induced Debonding Failure in FRP-Strengthened RC Beams
- Assesment of Proposed Models for Determining Allowable FRP Tensile Strain for Mitigation of Debonding Failure in FRP-Strengthened RC Beams
- Study on CO2 Sequestration Property of Cement Based Composite Cementitious Materials Containing Steel Slag Used in Road
- Simulation Study on Heat Insulating Material Used in Refrigerated Cargo Hold Shipboard of Fishing Vessel
- Electromechanical Coupling Coefficient of SAW on Proton-Exchanged and Annealed LiNbO3 Waveguides
- Numerical Simulation of Embedded and Co-Cured Composite Damping Structure under Low Velocity Impact
- Microstructure Formation with the Elastic Interactions of Internal Stress and Applied Stress
- Extenics Decision Model for Evaluating Mechanical Joint Interface of Reconfigurable Machine Tools
- The Strength Reliability Analysis of Periodically Symmetric Struts Supports of Gas Turbine Based on Monte-Carlo Method
- Analysis on Properties of Water-Based Fire-Retardant Nano-Coatings
- Properties of Autogenous Shrinkage in High-Strength Mass Concrete According to Hydration Heat Velocity
- Effect of Anisotropic Membrane Surface Modification of Nafion Based Ionic Polymer-Metal Composites
- Aging Behavior of Cu-Cr-Zr-Y Alloy
- Integrated Design of Hydrostatic Slideway Driven System
- Strain Hardening Modeling of High-Strength Stainless Steel Tube
- A Simulation Study for the Influence of Pulse Heating on Thermal Imaging of Carbon Fiber Composites
- Preparation of Terminal Phenolic Hydroxyl Triazine Dendrimer and its Combination Tanning Properties with the Aluminum Salts
- Influence of Pulsed Current Annealing on Giant Magneto-Impedance Effects of Co Based Amorphous Ribbon
- Some Research on the Magnetic X Zeolite Composites
- Preparation and Research of Phase Change Material Based EVA / Binary Fatty Acids Composite
- The Progress in Research on Silk Fibroin Blend Membranes
- Microstructure and Mechanical Properties of 3D Needled Carbon Fibre Reinforced Carbon and Silicon Carbide Composites
- Experimental Investigation Contrast to Coal Dust and FS Powder Application
- Surface Modification for Cotton Fiber and its Antimicrobial Characteristics
- Effects of Heat Treatment Condition on Properties of Strontium Barium Niobate Based Glass-Ceramic for Energy Storage Capacitors
- Study of Cellulose-Dibutyl Sebacate Copolymer Synthesis and Characterization of Crosslinked Cellulose-Dibutyl Sebacate Copolymers for Oil Absorbency
- Preparation of the Microsphere-Sized Poly(N-Isopropylacrylamide) Hydrogel Dispersed in Poly(Vinyl Alcohol) Matrix and its Thermo-Responsive Releasing Behavior
- Enhanced Photoelectrocatalytic Degradation of Azo-Dye Pollutants Using Transparent Titania Nanotube Arrays Glass Electrode
- Microstructure and Wear Behavior of Ti-Matrix Functional Gradient Layer
- Synthesis and Characterization of New Functional Material (C6H5CNH2nNH3)2PbI4(where n=0,1,2)
- The Efficient Synthesis of 1,3-Diallyloxy-2-Propanol without Solvent
- Hydrothermal Synthesis and Ferromagnetic Properties of Mn-Doped Na0.5Bi0.5TiO3 Crystals
- Influence of Different Extraction Methods of Tea Polyphenols on Proportions of Catechins
- Synthesis and Electrical Properties of Mo-ZrO2 Cermet
- Investigation of Initial Bubbles of CO2 Injected into Polymer Melt
- Study on Microstructure and Corrosion Behavior of Ag-Cu-Zn-Ni Alloys
- Performance Evaluation of High-Modulus Asphalt Mixture
- Cone Calorimeter Analysis on the Fire-Resistant Properties of FRW Fire-Retardant Particleboard
- Preparation and Characterization of Organic-Inorganic Hybrid Perovskite (C6H5CH2NH3)2CuCl4
- Effect of Composite Shape-Stabilized Phase Change Material on Asphalt Mixture Temperature
- The Study of the Large-Sized High-Quartz Translucent Porcelain Plate
- Catastrophic Analysis of Seismic Response of Gravity Dam Sliding along Base Surface
- Transient Analysis of Flow Field in Cylinder of an Engine
- The Research of Evaluation for Product Conceptual Design Based on ANP and Fuzzy Theory
- Investigation on Innovative Design Method of Vehicles
- Modeling of Passive Adaptive MR Damper
- Experiment Research and Numerical Simulation of an Innovative Seismic Isolating System Designed for Long-Span Continuous Girder Bridges
- Study of Cylinder Liner Based on Ultrasonic Plateau Honing
- Experimental Research on Four-Tube Concrete-Filled Steel Tubular Laced Columns
- Design of a Piezoelectrically Actuated Jumping Robot
- Study on Effect of Relief Groove Angle Expressing the Position in Reducing Noise of Swash Plate Axial Piston Pump
- Effects of Temperature, Relative Humidity and Washing Times on the Electrical Conductivity of Carbon-Coated Filaments
- The Design of Combustion Control System Based on Fuzzy Immune Internal Model Controller
- Thermal Post-Buckling Improvements of Laminated Composite Plates Using the Active Strain Energy Tuning Approach
- Coordination Needs and Performance for Manufacturing Process Improvement Projects
- Design and Analysis of MR Damper with Radial Duct for Tracked Vehicle Suspension
- Microstructure and Mechanical Properties of Mg-RE-B Alloys
- Preparation of Brunet Reflective Exterior Insulation Coating
- Dynamic Coupling Hysteresis Model for Giant Magnetostrictive Materials
- Preparation of Monodisperse Poly(N-Isopropylacrylamide) Microgels with #946;-Cyclodextrin Moieties
- Study on Diesel Engine Fault Diagnosis Based on Integration of Bayesian and Genetic Neural Network Method
- Modeling of Electrical Resistivity Evolution Using Free Energy Analysis for NiTi Shape Memory Alloy Wires
- Semi-Active Control of a Vehicle Suspension Based on Magneto-Rheological Damper
- The Research on the Preparation of Sodium-Poly-Methyl-Acrylic and Sodium-Alginate Blend-Micro-Spheres and its Form
- Experiments and Analysis of Bending Dielectric Elastomer Actuator
- Damage Evaluation in Smart Materials Using Time-Frequency Analysis
- Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-#948;-Ag Composite Cathode Materials for IT-SOFCs
- Polynomial Based Elasticity Solutions of Beams and their Numerical Validation: A Review
- Development of Green Remanufacture Mechanized Production Line which Use for 200L Oil Drum (iron) Circulation Use
- Conjugate Limits and Interferential Condition as Milling the Helical Face
- A Proposal of Robust Design Method for Deriving Adjustable Range
- Friction Stir Processing for the Modification of Laser Claded Microstructure
- The Variable Cross-Section Helix Turning Trajectory Algorithm Used on the Middle-Convex and Varying Ellipse Piston Skirt
- Study on Hydrogen Evolution Properties of Carbon Supported PtCu-LaOx Membrane Electrode Materials
- Study on Cold Precision Forging of Non Straight Wall Cavity Piston
- The Research of Nonlinearity Error Control on Five-Axis Machining Post Processor
- Effect of Graphite Dopant on the Performance of Tubular Cathode for Direct Ethanol Fuel Cell
- Two-Dimensional Numerical Simulations of Tubular Cathode in a Direct Ethanol Fuel Cell
- Laser Hybrid Welding Processing of Mg-Rare Earth Alloy
- Prediction of Temperature Distribution in High-Speed End Mill Assisted by Heat Pipe Cooling
- Microstructure and Mechanical Properties of Laser Welded Lap Joints of Ti-6Al-4V Alloy
- Research on the Velocity Look-Ahead Algorithm in the NC System
- Effect on Formation of 5083 Aluminum Alloy of Activating Flux in FBTIG Welding
- Optimization on Resistance Performance of High Speed Unmanned Surface Vehicle in Middle-Low Speed
- Adaptive Variable Speed Control of Wind Turbines
- Study on the Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-#948; Membrane after Laser Ablation for Methane Conversion
- Design of Digital-High-Power LAB Charger
- Electrochemical Performance of New Ferroalloy Electrode of RE2FeSb2 (RE = Y, Dy, Er)
- Welding Technique for New High Speed Railway Track Key Part
- Micro-Tubular Solid Oxide Fuel Cell with Graded Anode and Cobalt-Free SrFe0.9Sb0.1O 3#8722;#948; Perovskite Cathode
- A Numerical Investigation of a Capacitive Viscometer with Fluid-Structure Interaction Using Equivalent Modeling
- Research and Application of Wireless Data Acquisition System for Agricultural Machine
- Finite Element Analysis on Thermal Characteristics of Lathe Motorized Spindle
- Structure Optimal Design Method and Engineering Application
- Silicone-Modified Butyl Acrylate-Methyl Methacrylate Copolymer Latex: Effects of Coupling Agents
- Study on Hoist Force Calculation of Hydraulic Lifting System Used in Pressure Balance Workover Rig
- Stiffness Calculation and Predetermined Preload Optimal Design of Cable Control System
- Multi-Domain Unified Modeling and Simulation for Aircraft Landing Gear Using Modelica