Materials Science and Engineering Technology : Selected, peer reviewed papers from the 2014 International Conference on Materials Science and Engineering Technology (MSET 2014), June 28-29, 2014, Shanghai, China /
Saved in:
Meeting name: | International Conference on Materials Science and Engineering Technology (2014 : Shanghai, China) |
---|---|
Imprint: | Durnten-Zurich, Switzerland : Trans Tech Publications, Ltd., [2014] ©2014 |
Description: | 1 online resource (2395 pages) : illustrations (some color) |
Language: | English |
Series: | Advanced Materials Research, 1022-6680 ; v. 936 Advanced materials research ; v. 936. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11276151 |
Table of Contents:
- Mechanical and Thermal Properties of Siloxane Reinforced Biphenyldiol Formaldehyde Resin Curing Epoxy Resin Composites
- Polymer Blend through Inclusion Complexation
- Fabrication and Properties of Composites of Linear Polyacrylamide and Functionalized Carbon Nanotubes
- Thermal Degradation Behavior of Polypropylene and Ethylene Vinyl Acetate Copolymer Treated with Intumescent Flame Retardants Containing Caged Bicyclic Phosphates
- Effect of Pr Modification Treatment on the Microstructure and Mechanical Properties of Cast Al-Mg2Si Metal Matrix Composite
- Curing Kinetics of Silicone Epoxy Resin Containing Fluorene
- Synthesis of Core @ Shell Composite Particles with a Tunable Shell Containing Natural Urushiol
- Preparation and Properties of Polypropylene-Graft-Cardanol by Reactive Extrusion
- Analysis and Experiment of Compressive Residual Strength of Composite Laminates with Holes
- Microstructures of Poly (9'9-Dihexylfluorene) Grown in the Non-Solvent Vapor
- Synthesis and Properties of Polypropylene Carbonate Polyol-Based Waterborne Polyurethane
- Curing Process of Epoxy Resin Using Low Molecular Polyamide 651 as Curing Agent
- Synthesis of Bis(p-aminophenoxy)Dimethylsilane(p-APDS) and its Process Optimization
- Structure and Mechanical Properties of Starch/Styrene-Butadiene Latex Composites
- Experimental Advances in Effect of Waviness on Properties of Fibre Reinforced Composite Materials
- Effect of Crosslinker Type on the Properties of Surface-Crosslinked Poly(sodium acrylate) Superabsorbents
- Phase Separation in Thermosetting Blends of Epoxy Resin with PS-b-PCL and PI-Si Block Copolymers
- Effect of PZN Addition on Piezoelectric and Ferroelectric Properties of Pb (Zr1/2Ti1/2)O3 Ceramics
- Effect of External Magnetic Field on Dielectric Spectroscopy of Modified PZT Ceramics
- Optical Interferometric Technique for Induced Strain Ferroelectric Loop Study at Low Frequency
- Effect of Dielectric Properties and Elastic Strain Behavior on x/65/35 PLZT Ceramics in Lanthanum (x) Ions Contents
- Dielectric and Ferroelectric Behavior in 8/40/60 PLZT Ceramics
- Preparation and Optoelectronic Properties of In2O3 Microtubes
- The Anti-Plane Shear Problem of Two Symmetric Cracks Originating from an Elliptical Hole in 1D Hexagonal Piezoelectric QCs
- CdS-Bentonite Sulfide Ion Sensor: pH Effect and Selectivity
- Relationship between Annealing and Shape Memory Effect of Shape Memory Polyurethane
- Preparation of Uniform #945;-Alumina Microspheres by Catalytic Precipitation and Calcination Process
- Phase Structure and Piezoelectric Properties of (K0.5Nb0.5)NbO3 - CaZrO3 Ceramics
- A Novel Model for Predicting the Thermal Conductivity of Fiber Reinforced Ceramic Materials
- Nucleation, Crystallization and Characterization of Mica-Based Glass-Ceramics with Fluorapatite
- Preparation of C@ZrSiO4 Inclusion Pigment Using Compound Colorants via Non-Hydrolytic Sol-Gel Method
- Fabrication and Characterization of SiC-Coated Multi-Walled Carbon Nanotubes Reinforced Reaction Bonded SiC Composite
- Carbonization Effect on Phase Structures of Zirconium Oxides with 2-3 Percent Yttrium
- Numerical Research of the Beryllia Ceramics Formation Process
- Cu(In,Ga)Se2 Films Deposited by Sputtering with Single Cu(In,Ga)Se2 and Cu-Ga-In2Se3 Targets and a Subsequent Selenization Procedure
- Effect of Hydrogen Dilution Ratio and Substrate Roughness on the Microstructure of Intrinsic Microcrystalline Silicon Thin Films
- The Photoluminescence from (Eu, Yb) Co-Doped Silicon-Rich Si Oxides
- Compatibility of Polyvinylidene Difluorid/Polyurethane and Preparation of Composite Tubular Membrane
- Preparation and Properties of Two-Dimensional Braid Heterogeneous-Reinforced Polyvinylidene Fluoride Hollow Fiber Membrane
- Effect of Ethanol Composition in Water Coagulation Bath on Structure and Performance of Homogeneous-Reinforced Polyvinyl Chloride Hollow Fiber Membranes
- Fabrication and Characterization of CuO Micro-Dimensional Structures for Superhydrophobic Surface
- Low Temperature Preparation of Aluminum Titanate Film via Sol-Gel Method
- Multilayer Film through Inclusion Complexation
- Preparation and Characterization of Bipolar Membranes Modified by Adding Multi-Carboxylic Metallophthalocyanine Derivatives into the Cation Layer
- Highly Strained Silicon Nitride Thin Film Deposited by PECVD with Double Frequencies in Strained Silicon Technologies
- Layer Formation of SAPO-34 Zeotype Material by EPD Seeding Method Followed by Hydrothermal Secondary Growth
- Substrate Dependence of Microcrystalline Silicon Growth with SiH4 Diluted by Ar
- Study on the Polarization Reversal Characteristics of a Ferroelectric Thin Film with Surface Transition Layers
- Fabrication of Diamond Films on Cu Metal Substrates with Buffers (SiC or MoSi2) by Hot Filament Chemical Vapor Deposition
- Epitaxial Pd-Doped LaFeO3 Films Grown on (100) SrTiO3 by Pulsed Laser Deposition
- The Preparation of the Highly Preferred Orientation of Wurtzite Structure Zinc Oxide Films
- A Facile Method to Preparation of Amphiphilic Perylene Tetracarboxylic Diimide/ZnS Hybrid Nanocomposites and Improved Semiconducting Property
- Pt-TiO2 Nanocomposites in Alginate for Enhancing Photocatalytic Activity
- Preparation of Carboxymethyl Chitosan Magnetic Nanoparticles and Separation of Chinese Medicines Components
- Comparison of Hydrogen Sulfide Sensing Properties between Multiple-Walled Carbon Nanotubes (MWNTs) and MWNTs-HAuCl4 Materials
- Effect of Cu,Cr Co-Doped on Structure and Magnetic Properties of Sm2Co17 Alloy Films
- Hyaluronic Acid Functionalized Porous Silica Nanoparticles for Drug Delivery and Release
- Preparation and Characterization of Fibrillated Nanofibrous Filter Material
- The Improvement of Pd Nanoclusters Electro-Catalytic Properties for FAO by the Addition of Co Element
- Synthesis and Characterization of Emulsion Coating of Fluorinated Polymethacrylate Modified by POSS
- The Performance of Gold Nanoparticles Supported on Mesoporous Zirconia for the Synthesis of Azoxybenzene
- The Facile Hydrothermal Preparation of WO3 and its Photocatalytic Performance under Visible-Light Irradiation
- Hydrothermal Synthesis and Characterization of Cerium-Based Oxides
- Controlled Synthesis of Core-Shell Structure SiO2 /NaGdF4:Eu3+ Magnetic and Optical Bifunctional Composite
- Electrochemical Properties of Graphene Nanosheet/Polyaniline Nanocomposite as Electrode for Supercapacitors
- Graphene/Sulfur Nanocomposite for High Performance Lithium-Sulfur Batteries
- Preparation and Characterization of Magnesium Oxide Aerogels
- Enhanced Field Emission Characteristics of ZnS Dentalation Nanostructures
- Enhancement of Titania Photocatalytic Properties by Fabrication of MWCNT-TiO2 Nanocomposites
- Study on Tensile and Impact Performance for the MWCNTs/EP Composite
- The Natural Rubber/Zinc Oxide Nanocomposites: Its Morphology, Mechanical and Thermal Decomposing Properties
- Effect of Grain Size on the Fracture Toughness of Bimodal Nanocrystalline Materials
- Numerical Simulation of Synthetic Heat Transfer in Laminar Nanofluid in a Horizontal Pipe
- Particle Swarm Optimization Technique for DNA Sensor Model Based Nanostructured Graphene
- Preparation of Ethanol-Sensing Gas Sensor Based on PECH/Multi-Wall Carbon Nanotubes Sensitive Films
- Preparation and Characterization of Polyacetylene/Expanded Graphite Composites
- Preparation and Mechanics Properties of the EP/SiO2 Nanocomposites
- Effects on Characteristics of the SiO2-to-Na2O Ratio on Nano-SiO2 Metakaolin-Based Geopolymers
- Microstructures of ZnO Electrospun Nanofibers on AZO Glass
- Research of Properties on Li-Ion Batteries Based on a Polypyrrole Derivative Bearing TEMPO as a Cathode Material
- Nanostructured Morphology of Spinel LiMn2O4 Oxide under Microwave Heating
- Effect of SnO2 Particle Size on Properties of Ag-SnO2 Electrical Contact Materials Prepared by the Reductive Precipitation Method
- Electrochemical Investigation of La0.2Sr0.8TiO3+#948;-Ce0.8Sm0.2O2-#948; Composite Cathode for the Direct High Temperature Steam Electrolysis
- Highly Hydroxylated Graphite Felts Used as Electrodes for a Vanadium Redox Flow Battery
- A Novel Route to Prepare Titanium Doped Mesoporous Carbon
- Enhanced Electrochemical Performances of LiFePO4/C Cathode Materials by Deposited with Ge Film
- Study on Ag/SnO2/TiO2 Electrical Contact Materials Prepared by Liquid Phase In Situ Chemical Route
- A Novel Synthesis of Nanometer Spherical #946;-Ni(OH)2 Cathode Materials with High Electrochemical Performances
- A High Rate, High Capacity and Long Life (LiFePO4+AC)/Li4Ti5O12 Hybrid Battery-Supercapacitor
- Modeling of Recrystallization Texture of Rolled Polycrystalline Aluminium
- Numerical Analysis on Decay Heat Power of Weapon-Grade Uranium and Depleted Uranium
- Hydrogen Storage Mechanism of Fe3O4: A First-Principles Study
- Phase Field Crystal Study for the Effect of Heating Rate on the Premelting of Grain Boundary
- A First-Principles Study on Electronic Properties of Ce/N Codoped Anatase TiO2
- Effective Nuclear Field Measurement in a Single Quantum Well via Time-Resolved Kerr Rotation Technique
- Theoretical Investigation on Rearrangement Mechanism of Fluoroalkylsilane
- Assessments of Impurity Diffusion Coefficients of Selected Pure Metals in Fcc Fe
- The Properties of a Novel Green Long Afterglow Phosphor Zn2GeO4:Mn2+0.01, Pr3+0.01
- Dy3+ Doping Blue-Green Sr4Al14O25:Eu2+ Phosphor for Enhancing Luminescent Properties and the Mechanism Study
- Magnetic and Electrical Property in Mg2+ Deficient La1.4Sr1.6Mn2O7 Perovskite
- The Ideal "Defects" of the Crystal Structure of GaAs
- Cooperative Energy Transfer of Er-Gd-Tb System in Tb3+, Er3+ Co-Doped K2GdZr(PO4)3 as a Potential Visible Quantum Cutting Phosphor
- First-Principles Investigations of Electronic, Dynamic and Thermodynamic Properties of #945;-MnO2
- Ultra-Multilevel-Storage Phase Change Memory
- Surface Passivation of Crystalline Silicon by a-Si:H Thin Films
- Microwave-Assisted Synthesis of Graphene Oxide-MnO2 Composites for Supercapacitors
- Te Inclusions in CdMnTe Crystal Grown by the Traveling Heater Method and their Effects on the Electrical Properties
- The Effect of the Cu Source on Optical Properties of Cu-Doped ZnO Films
- The Model of Nano-Scale Cu-Particle Removal in CO2-Based Micelle Solutions with Different Surfactants
- Failure Analysis of the Solder Joints in Flip-Chip BGA Packages under Free-Drop Test
- The Advantages of Ga-Graded Obtained by Growth Profile Modification and Na Incorporation on Cu(In,Ga)Se2 Solar Cells
- Near-Field Broadband Light Transparency via Tunneling and Cavity Effects
- Modification of Epoxy Resin with Silicone for Electronic Encapsulation Application
- Effect of Annealing Oxygen Flow Rate on the Properties of Vanadium Oxide Films Deposited by Reactive Magnetron Sputtering
- TEM Study of AlGaN/GaN on Hexagonal SiC Substrates
- Protein Adsorption on Titanium Surface Functionalized with Bioactive Gelatin Methacrylate Hydrogel Coating
- Extraction and Antifungal Activity of a Lipopeptide Biosurfactant
- Immobilized Recombinant Chitinase and its Inhibition Effect on Botrytis Cinerea
- Electrospinning Synthesis of PLA Fiber Film Containing Antimicrobial Silver Nanorods
- Characterization of Three Calcium Phosphate Microporous Granulated Bioceramics
- Characterization of Different Nanostructured Bone Substitute Biomaterials
- Sintering and Characterization of Calcium Phosphate Biomaterials Elaborated from Fossilized Calcareous Shell
- The Content of Physiologically Active Substances in Several Medicinal Mushrooms with Various Doses of #947;-Irradiation
- Synthesis and Characterization of Three Hydrated Calcium Phosphates Used as Biocement Precursors
- Preparation and Release Profiles of a Solid Oleoylchitosan Coated Poly(lactic-co-glycolic acid) Nanoparticles
- Polymer-Tethered pH-Sensitive Magnetic Nanoparticles for Targeted Delivery of Anti-Cancer Drug
- Preparation and Anti-Tumor Activity of Polysaccharides from Phellinus pini Mycelia
- A Facile Method to Synthesize Responsive Magnetic Polymer Composite Nanoparticles with Multifunctional Groups
- The Effects of Immobilization Conditions and Materials on the Desulfurization Performance of Immobilized UP-3
- The Release Characteristics of Different Model Drugs from Medicated PLGA Microspheres
- Synthesis and Performance of pH-Sensitive Hydrogel Microspheres and In Vitro Evaluation as Potential Drug Carriers
- Study on Structure Analysis and Cell Toxicity of Okra Polysaccharide
- Resveratrol Loaded Self-Microemulsifying Drug Delivery System (SMEDDS): Development and Optimization
- Stress Analysis of the Hip Joint Endoprosthesis Ceramic Head for Different Values of Shape Deviations
- Synthesis and Characterization of Amphiphilic Copolymer Poly[2-(dimethylamino)ethyl methacrylate-co-methyl methacrylate]
- Assessment Antibacterial Activities on Essential Oil of Plant Extract
- Preparation, Characterization of Cellulose Fibers Grafting by #946;-Cyclodextrin and their Application for Antibacterial Products
- Detoxification Capabilities of Adsorbents for Artificial Liver Support Devices: A Comparison
- Prediction of the Tertiary Structure and the Dimerization Interface of FNR Protein in Klebsiella pneumoniae
- Potassium Dichromate Surface Modification of Poly-Lactic Acid (PLA) and Poly-Lactide-Co-Glycolide (PGLA) Fibers
- Preparation and Photocatalytic Performance Study of La-WO3 Co-Doping TiO2
- Preparation and Photocatalytic Performances of F-Doped TiO2
- Preparation of Doped TiO2 Responded to Visible Light
- Development and Comparative Analysis of Aluminosilicate Based Ceramic Filters for Ground Water Defluoridation
- Adsorption of Ni (II) from Aqueous Solution Based on Porous Magnetic/Chitosan Resin
- Highly Efficient Adsorption of Eriochrome Black T in Wastewater on Mesoporous Alumina Sphere
- Construction and Application of Molecularly Imprinted Film Sensor on Determination of Chlorpyrifos in Water
- An Investigation of some Factors Affecting the Dispersant NNO Adsorption on Imidacloprid Particle
- Adsorption Studies of Methacrylic Acid-Styrene-Acrylic Polyethers Copolymer on Imidacloprid Particles
- Adsorption Characteristics of Methacrylic Acid-Styrene Copolymer onto Azoxystrobin Particles Surfaces
- Preparation of 5-Sulfosalicylic Acid Modified Silica Gel and its Adsorption Performances for Lead
- Preparation and Characterization of Mesoporous Activated Carbon from Alligator Weed with H3PO4
- Silica Gel as an Adsorbent in the Removal of Cationic Blue X-Bl from Aqueous Solutions and its Regeneration by UV-Fenton Oxidation
- Optimization and Evaluation of Preparation Process of Activated Carbon Loaded ZrO2 Catalyst for Oxidative Desulfurization
- Research on the Quicklime Treatment Dewatered Sludge Technology and Mechanical
- Simultaneous Reduction and Immobilization of Cr2O72- in Metakaolinite-Based Geopolymer Complexed Reductant
- Construction of a Novel 3D Indium Phosphate-Phosphite with Extra-Large 16-MRs Channels: Synthesis, Structure and Fluorescence Property
- The Effect of Polyvinyl Pyrrolidone and Nickel Acetylacetonate on the Fabrication of Polyacrylonitrile Precursor Fiber
- Morphology and Conductivity of Self-Assembled Pyrene-Perylenetetracarboxylic Diimide Dyad
- Synthesis, Structure and Characterization of a Novel 3D Zinc Organophosphonate
- Hydrothermal Synthesis and Characterization of Hexagonal Mg(OH)2 Flame Retardant with Bischofite and NH3
- Effect of Solvent Properties on the Swelling Assisted with Protrusion of PS@TiO2
- Non-Isothermal Crystallization Kinetics of Semi-Aromatic Polyamide and the Preparation of its Fiber
- Recycled Paper Cellulose Aerogel Synthesis and Water Absorption Properties
- Preparation of P(GMA-co-EGDMA) Monolithic Columns with Adjustable Porous Properties
- The Synthesis and Electro-Optical Properties of Perylene Dicarboximide Dimer with Electron Withdrawing Groups
- Effect of Aniline Oligomer on the Electrosynthesis of Polyaniline Fibres
- Preparation and Properties of Electroactive PANI by Electrodeposition
- Electrocatalytic Hydrogenation of Oxalic Acid to Glyoxylic Acid on a Self-Organized TiO2 Nanotube Electrode
- Preparation of Zircon Whiskers via Non-Hydrolytic Sol-Gel Process Combined with Molten Salt Method
- Low Temperature Preparation of Mullite Whisker via Non-Hydrolytic Sol-Gel Process Combined with Molten Salt Method
- Co-Ni Bimetallic Catalysts Coated on Cordierite Monoliths for Hydrazine Decomposition
- Low-Cost Synthesis and Morphology Control of Magnesium Oxysulfate Hydrate Whiskers
- The Preparation of Starch Sodium Octenyl Succinate and its Application as Surface Sizing Agent
- Structure and Property Development of Polyacrylonitrile Fiber with Ionic Liquid as Solvent during Spinning Process
- Plasticization of Cellulose Diacetate by Ionic Liquid
- Studies of Vapor-Liquid Equilibrium of Meta-Xylylenediamine-Aniline System
- Experimental Studies of Catalytic Hydrogenation of Isophthalonitrile for Meta-Xylenediamine Preparation
- Orthogonal Investigation of Influencing Factors on the Modification of Montmorillonite by THPC in Acid Conditions
- The Effects of PTFE Content on Microstructures and Properties of Composite Brushing Plating Coating
- Novel Infrared Stealth Properties of Cotton Fabric with ZnO: (Al, In) Coating
- Research on Influencing Factors of Adiabatic Coating Performance
- One-Step Processing to Fabricate Highly Transparent Superhydrophobic Surface via Granuliform Silica Aerogels
- Deep Cryogenic Treatment and CrN Coating Effects on Micro-Scale Abrasion of Aluminum Alloy AA 6101-T4
- Wear Resistance of Ti-40Zr Alloy with TiN and ZrN Multilayer Coatings
- Preparation and Tribological Property of Novel Self-Assembled Composite Films on Silicon
- Study on the BTSPS Silane Film Prepared on the Surface of the 2A12 Aluminum Alloy
- Hydrophobicity of Beeswax-Chitosan Latex Coated Paper
- Research on Cerium Conversion Coating on ZM5 Magnesium Alloy
- Microstructure and Properties of Laser Surface Carburized Titanium and Titanium Alloys
- The Application Research of Ship Metal Corrosion in Marine Environment
- Corrosion Resistance of Three 316 Stainless Steels
- The Corrosion Behavior of Cu-Ni-Si Alloy in Sea Water with Deep-Sea Bacteria
- Corrosion Performance of Medical Titanium Alloy with Different Surface Morphology
- Analyzing the Corrosion of "Hai Yang Shi You 931" Jack-Up Drilling Unit
- Effects of Soil Type of Shanghai and Electrode Potential on Near-Neutral pH Stress Corrosion Cracking of Pipeline Steel X60
- The Effects of Hydrogen on Properties of Surface Films Formed on Iron in Sulfate Solutions
- Corrosion Inhibition of Gemini Surfactant for Copper in 3.5% NaCl
- A Study of the Corrosion Resistance of M50NiL Bearing Steel by Ion Implantation
- Microstructure Evolution Characterization of Multi-Pass Hot Rolling Simulation of Nb-Ti Microalloyed Steel
- Grade E550 Heavy Steel Plate by TMCP for Offshore Energy Exploration
- Preparation of Crystalline Hematite from Bauxite
- The Effect of Heat Treatment of Gray and Nodular Cast Iron with Ferrite Matrix on Mechanical Properties and Corrosion Rate Compared with Medium Carbon Steel
- Microstructure and Tensile Behavior of Ti-Rich Ti-Ni-Cu Melt-Spun Ribbon
- The Oxide Defect of C70250 Alloy
- A Study on Austenite Catalytic Cryogenic Treatment of Cr-W-Mo-V High Alloy Medium-Upper Carbon Steel
- Effect of Forging Process on V-Nb-Ti Microalloyed Non-Quenched and Tempered Steels
- Experimental Study and Calculation of the Precipitation Behavior of Carbides in Fe-5.78Cr-0.35C Alloy during High-Temperature Aging
- Effect of Temperature on the Ti-Fe Alloy Prepared by Molten Salt Electrolysis
- Preparation of Ti-Fe Alloy from Titanium Concentrate by Electro-Deoxidization in CaCl2
- Study on Atomic Mobility and Molar Volume for FCC Fe-Co Phase
- Molar Volume of Fcc Phase in the Ni-Cr-Mo System
- Effect of Aging Treatment on Phase Transformation of a Pseudoelastic NiTi Alloy
- Improvement of Paint Hardening Response of a Novel Al-Mg-Si Alloy for Automotive Panel by Adding Zn and Pre-Ageing Matching
- Effect of Mn and Si on the Microstructure and Mechanical Properties of Bearing Steel
- Influence of Nitrogen Atmosphere Annealing on Structural and Transport Properties of Fe1.125Te
- Interface Reaction Thermodynamics of AgCuTi Brazing Filler Metal and Alumina Ceramic
- Influence of Deformation on Aging Precipitation Behavior of an Al-Cu-Mg-Si Alloy
- Workpiece Surface Integrity of GH4169 Nickel-Based Superalloy when Employing Abrasive Belt Grinding Method
- Studies on Refining Effect and Process Optimization about LF
- Influence of RE Addition on Ferro-Matrix Friction Material by In Situ Carbothermal Reduction from Vanadium-Bearing Titanomagnetite
- Influence of the Mo and V Contents on Microstructure and Secondary Hardening of 6Cr6W2MoV Steel
- Study on Wear Behaviors of Ni3Al/Cr-Carbides Cladding Layer on High Strength Steel Substrate
- Study on the Mechanical Stability of Retained Austenite in Cold-Rolled Medium-Mn Steel
- Influence of Heat Treatment on Fatigue Resistance of Sintered Ti 35Nb 7Zr 5Ta #946; Alloy
- Effect of Hydrogen on the Micro- and Macro-Strain near the Surface of Austenitic Stainless Steel
- Thermographic and Microstructural Analysis of Martensitic Stainless Steel ASTM A743 CA6NM Arising out of Layered GMA Welding Process Using AWS 410 NiMo Welding Wire
- Two High Strength Low Alloy Steels for Offshore Application
- Numerical Simulation on Influence of Water-Cooled Stool in the Process of Unidirectional Solidification
- Application of Calcium Treatment to Sulfur Gear Steel 20CrMo
- Nonlinear Dynamic Finite Analysis of BFRP-Strengthened Masonry Structure Based on ABAQUS
- Crystal Structure and Hydration Characteristics of Tricalcium Silicate Doped with Magnesium Oxide
- Mechanical Damage Model of Concrete Subject to Freeze-Thaw Cycles Coupled with Bending Stress and Chloride Attack
- Numerical Investigation on Fatigue Problem of Cable Net Structure of Five-Hundred-Meter Aperture Spherical Radio Telescope
- Study on Compressive Performances of Fiber Reinforced Mortar with the Application of Jute and PP
- Study on Low-Cycle Fatigue Life of Base Metal of the Shock Absorber
- Corrosion Behavior of F30S30 Concrete under Wet-Dry Cycles in Simulated Seawater with Magnesium Salt and Sulfate
- Different Salt Solution on the Deterioration of Marine Engineering Concrete under the Action of Chemical-Mechanical Coupling
- Polymer Modified Cementitious Waterproofing Coatings: Application and Problems
- Analysis of Curing Agent on the Strength of Lightweight Soil Using Recycled Sludge
- Study on Engineering Characteristics of Coarse-Grained Soil Based on Large-Scale Triaxial Test
- Copolymerization Kinetics of Polyetyhylenglycol Allylether Type Polycarboxylate Superplasticizer
- Improving the Volume Stability of Steel Slag for Construction and Building Materials
- Effect of Grinding Aids on the Particles Characteristics of Cement and Analysis of Action Mechanism
- Effect of Mineral Admixtures on Rheological Properties of Cement Paste
- Theoretical Study on Seismic Behavior of LYTAG Concrete
- The Frost Resistance of LYTAG Concrete
- Recombinant Materials and Contemporary Energy Efficient Architecture
- Effect of the Composite of Fly Ash and Slag on Alkali-Silica Reaction
- Analysis of the Influence of Clay Dosage and Curing Age on the Strength of Plastic Concrete
- The Experimental Study on Bearing Capacity of Reinforced Concrete Structure with Different Reinforce Methods
- Mechanical Properties of Crumb Rubber Concrete
- Research on Improving Shrinkage Performance of Cement Stabilized Gravel with Waste Rubber Particles
- Bending Properties of Laser Welded Web-Core Steel Sandwich Plates
- Effect of Rubber Particles on Properties of Pseudo-Ductile Cementitious Composites
- Back Analysis of Thermal Parameters of Mass Concrete and its Application Based on Micro-Genetic Algorithm
- A Effective Solution Method Based on Bayesian Rule for Prediction of Long-Term Tensile Strength of GFRP Bars in Concrete Beams
- Seismic Fragility Analysis of RC Isolated Continuous Girder Bridge Using Radial Basis Function Neural Network
- Robust Design of Structures with Uncertain Parameters and Frequency Constraints Using Non-Probabilistic Methods
- Research Based on Scanning Electron Microscopy to Determine Original Water-Cement Ratio of Hardened Concrete
- Numerical Simulation for the Damping Effect of Empty Holes on Blasting Vibration
- Analysis on the Effect of External-Wall Insulation on Energy Consumption of Residential Building in Lanzhou
- Energy Consumption for Heating Residential Building from Implementing Deferent Energy-Saving Standard
- The Scheme Comparison of Integral Structure after Adding Steel Storey to Concrete Frame
- Finite Element Analysis of Rainfall Infiltration in a Compacted Loess Embankment
- Numerical Analysis on Synergetic Behaviors of AE in Concrete Failure Process
- Simulation and Analysis of Energy Consumption Transformation in Office Buildings' Envelopes of Lanzhou
- Study on the Key Technology of Hot Regeneration of Plant-Mixed Asphalt Material
- Analyses of the Protective Effect of Polyethylene-Triethoxysilane and Triethoxysilane Emulsion Coatings on Concrete Substrate
- Research Progress of Thickening Agents for Supercritical CO2
- Study on the Crosslinkers Used in Gelling Agents
- Oil, Water, Slag Three Phases Separation Technology of Heavy Aging Oil
- Research on Chemical Degradation of PAM in Oil Recovery Application
- The Application of Based on Case-Based Reasoning for Drilling Parameter Optimization in HaiTa Oilfield
- Evaluation of Uncertainty of Hydrogen's Consistency in Transformer Oil by Gas Chromatography
- Dissolution of Zirconium Power and Detection of Zirconium Powder Content by ICP-AES Method
- Application of Magnetic Barkhausen Noise in the Evaluation of Heat Treatment Process
- Stress-Stain Response of PVC Geomembrane under Uniaxial Tension Test
- Design of the EMF-PF and Error Correction
- TURBISCAN: History, Development, Application to Colloids and Dispersions
- A Progress in Development and Application of Size Exclusion Chromatograph/Multi-Angle Laser Light Scattering
- Application of Polycarboxylic Acid Anti-Crease Finishing Agent for Silk
- A Same Area Method Used to Calculate the Strain in Forming for an Axisymmetric Workpiece
- Applying BP Neural Network Model to Forecast the Largest Coiling Torque of down Coilers
- Brazing Incoloy 800 Using the MBF-51 Filler Foil
- Activating of Nickel Slag and Preparing of Cementitious Materials for Backfilling
- Preparation and Characterization of Plasma Treated Melt-Blown Polypropylene Nonwovens Grafted with Acrylic Acid
- Microstructure and Mechanical Properties of High-Entropy Alloys CoCrFeNiAl by Welding
- Microstructure Refinement and Crack Initiation in the Forging Process
- Effect of Aging on Microstructure and Performance after Superplastic Deformation of Fine Grained 1420 Al-Li Alloy
- Numerical Simulation of One Pulse Power Laser Shock Peening
- Analysis of Hydraulic Prop High Frequency Induction Cladding Temperature Field
- CFD Simulation on Hydrodynamics of Liquid-Liquid Slug Flow in Microchannel
- Characterization of Local Cavity Pressures in Squeeze Casting of Magnesium Alloy AM50
- Microstructure and Mechanical Properties of Brazed Joints Used in Electronic Devices
- Structure and Performance of Chemical Duplex Plating Ti Metal Layer on Diamond Surface by Hydrothermal Method
- Numerical Simulation and Optimization Technology of Lost Foam Casting
- A Research on Optimization of Cutting Parameters Based on NSGA-II
- Behavior of Microwave Heating of 316 Stainless Steel Green Body
- Effects of Environment Temperatures on the Microstructures and Mechanical Properties for Welding Joints of A5083-H111 Alloy
- Experimental Research on Grinding Surface Layer Behavior and Process Parameter Optimization of Spiral Bevel Gears
- Development of Permanent Magnet Generator Used for Magnetic Field Assisted Micro Electroforming Technology
- Spray Cooling Unit for Heat Treatment of Stainless Steel Sheets
- Research on Forming Accuracy of Two Point Incremental Forming for Aluminum 1060
- A Servo Control System Based on Fuzzy PI Method for Transverse Flux Machine in Mechanical Press
- Effect of Traverse Speed on the Microstructure and Mechanical Properties in Friction Stir Welded Dissimilar Barrier Butt Joints of AA2024 to AA6061/SiC/55p Composite
- Deformation Behavior of Aluminum Alloy Tube in Semi-Dieless Metal Bellows Forming Process with Local Heating Technique
- Properties of X80 Pipeline Girth Welds for Different Welding Procedures
- Investigation of Porous Defects in Spray Formed 7XXX Aluminum Alloy
- A Study on Development of the Optimal Neural Network in GMA Welding Process
- Potential Spark Erosion Approaches to Silicon Nanoparticles Production
- Study on CMT Welding of Stainless Steel Railway Vehicle Body
- Energy Consumption Discussions of Porcelain Produce with Operating Conditions in a Simplified Model
- Microstructure and Mechanical Properties of Submerged Arc Welding Filled with Ni Wire Dissimilar Joints Comprising SUS304 and Q245R
- The Behavior of Second Phase Particles in a Ti-Nb Microalloyed Steel during Welding Thermal Cycle
- Study on the Technology and Defects in Low-Pressure Semi-Solid Die Casting of Aluminum Alloy Wheel Hub
- Influence of Heat-Treatment on Properties, Microstructure and Corrosion Resistant of Zirconium Sheet
- Multi Response Optimization of Carbon-Carbon (C/C) Drilling Parameters by Using Grey Theory Technique
- Study on Optimal Condition of Activated Carbon Prepared by Microwave Heating from Shot Coke
- Adhesive Systems for the Production of Multi-Layer Bonded Fabrics for Composite Applications
- Development of a Novel Technology for New Generation of Non-Crimp Fabrics - Manufacturing and Simulation
- Optimization of Drafting Conditions in the Break Drafting Zone Additional Pressure Bar on INA-V Spinning Frame
- Non-Isothermal Resistance Heating for Hot-Stamped Parts with Tailored Properties and Tempering Treatment on Directly Hot-Stamped Parts
- Comparisons of Explicit and Implicit Finite Element Methods for Sheet Metal Forming
- Numerical Simulation Study of the Influence of Turning Depth on the Bending Vibration Mode of Work-Piece
- Application of Multidisciplinary Design Optimization in the Casting Process Optimization
- Analysis of the Common Causes of Papermaking Cast Iron Dryer's Defects and the Study of Test On-Line
- Reserch on a NOx Emission Forecasting Method Based on Naïve Bayesian
- Analysis of Grinding Roller Stress Distribution of Vertical Roller Mill
- Establish the Load Distribution Model for Vertical Mill Grinding Roller in Width Direction
- The Optimal Levenberg-Marquardt Algorithm to Predict Welding Quality Using Mahalanobis Distance Theory
- Research on the Ni-Cr Alloy Coatings on the Hydraulic Prop by High-Frequency Induction Cladding
- Research on Material Structure, Appearance and Color Design and Application of Humidifiers - With Student Consumers as Research Objects
- 260t Ladle Stress and Deformation Finite Element Analysis
- 1450 Cold Rolling Mill Rack Finite Element Modal Analysis
- Set-Up and Application of Thermal Fatigue Knowledge Ontology
- Void Formation and Growth at Solder-Bonded Interfaces in HP LEDs
- Evaluation of Thermal Fatigue Crack States of Super-Hard Cutting Tools Based on the Extension Theory
- Relationship between the Textures and the Elastic Moduli of Electron Beam Welded Joint in Ti-6Al-4V Titanium Alloy
- Investigation of the Influence of Geometric and Technological Factors on the Stress-Strain State of Metal in the Implementation of the Combined Rolling-Pressing Process
- Influences of Material Parameters on Terminal Effect of PELE with Tungsten Fiber Composite Jacket
- Analysis and Optimization of Segregators' Structures on Separation Efficiency
- Manufacturing and Analysis of Non-Asbestos Sealing Gasket
- The Swelling Properties of Nitrile Rubber with Different Acrylonitrile Contents in Cyclohexane Medium Research
- Effect of Reserved Texture on Mechanical Properties of Cold Drawn Pearlitic Steel Wire
- Microstructural and Mechanical Properties of 9%Ni Steels Used for the Construction of LNG Storage Tanks
- Influence of Moisture and Temperature on Relaxation Function of Oil-Paper Insulation in Traction Transformers
- Influence of Si Content on the Characteristics of Al-Zn-In-Mg-Ti Sacrificial Anode
- The Application of Green Materials in Product Packaging Design
- The Hand Making of Radius Fillers and the Establishment of its Evaluative Requirements
- Comparative Study of High-Power White LED's Lifetime Based on Temperature Accelerated Test
- Study of Surface-Enhanced Raman Spectroscopy of Crystal Violet in Acid Aqueous
- Evaluation of Sound Absorption Capability from PET Mesh to PET/PU Composite Board
- Mode I Crack Problem for a Functionally Graded Orthotropic COATING-Substrate Structure
- Investigation of the Fluorescence Spectra of the Fluorescent Dyes
- X-Ray Analysis of Residual Stress in Weld Region of X70 Pipeline Steel
- Static Tensile Properties Simulation of Plane Woven-Reinforced Laminates with Hole Damage
- A Review of Numerical Study on Explosion and Shock Wave Resistance of Metal Foam Material
- Modelling Method for Preventing Thermal Runaway Reaction Accident of Thermal Reactive Material
- Thermal Structure Coupling Research and Thermal Fatigue Life Prediction of the Large Mining Machinery Brake
- Study on the Response of Composite Material Cylinder with Metal Liner under Thermal Mechanical Impact
- Porous Glass Composite as Diesel Particulate Filter and the Microwave Regeneration
- The Fracture Properties of Sandwich Structures Based on a Metal Foam Core
- Research on Tribological Properties of Cast Iron at High-Speed Dry Sliding Condition
- A Semi-Analytical and Semi-Numerical Method for Acoustics Radiation Characteristics of Rotational Shells
- Validation of a Novel Method for Thermal Performance Evaluation of Parabolic Trough Receivers
- Analysis of Penetration-Explosion Warhead Fragments Distribution and Damage Efficiency
- MR Based Brake-by-Wire System with Self-Energizing Capability
- Design and Optimization of the Bridge Expansion Joints Cleaning Machine
- Research on Tracked Vehicle Suspension Parameter Optimization Based on Surrogate Model Method
- The Simulation of Heat Transfer and Flow Performance for Supercharged Boiler Superheater
- The Resistance Performance Influences from Hull Line Variation of V-Shaped Non-Ballast Ship (NoBS)
- A Computational Fluid Dynamics Method for Resistance Prediction of the Floating Hull of Wave Glider
- Bifurcation and Chaos in Couplings with Clearance
- Material Selection and Finite Element Analysis for the Enclosure of Mine Exploration Robot
- Initial Pressure Influence on Explosion Pressures of Methane-Air Deflagrations in Linked Vessels
- Optimization Design of Transverse Flux Permanent Generator Based on Response Surface Method
- Application of the Lumped-Parameter Model in Concept Design Phase of Side Impact Safety Development
- Improved Dynamic Bayesian Networks in Sea-Battlefield Situation Assessment
- Energy Control of HEV Based on Fuzzy Controller Optimized by Particle Swarm Optimization
- Non-Ideal Excitation Approach for Piezoelectric Vibration Based Energy Harvesting
- The Study of Water Level Fuzzy Control for Supercharged Boiler Drum
- The Application of HPWM in Improving Vehicle Lateral Stability
- Photovoltaic Power Generation Data Preprocessing Using Wavelet Thresholding
- Transmission Line Insulators Detection Based on KAZE Algorithm
- Identification of Lightning Strikes on Transmission Lines Based on Integral Method and Wavelet Analysis
- Research of Power-On Detection in POE Topology
- The Research of Photovoltaic Array Intelligent Fault Diagnosis Based on the BP Neural Network
- Application of AM-OLED Micro-Display in Stereo Display System
- The Design of Wide-Stopband HTS Bandpass Filter
- Design of a Reader Antenna for UHF RFID
- An Effective Model for Wire Medium Based on the 4th Order Dispersion Equation
- Design of a Sine Sweeping Constant Current Source Based FPGA and DDS
- The Effect of Measurers' View Angle Deviation on Measurement Data
- The Engine Fault Diagnosis Based on Time Domain and Frequency Domain
- The Application of Improved Dynamic Decision Tree Based on Particle Swarm Optimization during Transportation Process
- Modeling and Simulation Method of Component Based Petri Net
- On the Hybrid Mean Value of the Square Residue
- Feature Extraction Method Based on Moment Invariants
- Numerical Movement Tracking of Mitral Valve Annulus
- Simulation of Ising Model by Monte Carlo Method
- On Infinite Lower Order of Vector Valued Dirichlet Series
- An Improved Mean Filter Algorithm for Impulse Noise Elimination
- Background Extraction by Fast Independent Component Analysis in Video Surveillance
- The Design of Multi-Protocol Network Based on Point-to-Point Protocol and Frame Relay
- Construction and Sharing of Library Digital Resources in China and Southeast Asia
- A Model Integration Framework Based Portability for GNSS Simulation
- A Fast Fault-Identification Algorithm Tailored for Optical Interconnection Networks in High-Performance Computers
- Research on Agent-Based Mobile Database Structure
- A New Cache-Based Network Coding Retransmission Scheme in Wireless Communication Networks
- The Shapes of Products and the Lifestyle with Slow Rhythm
- Application of Traditional Chinese Decorative Patterns in Ceramics Design
- Packaging Material Barriers Faced by Foods and Agricultural Products Export of China and Countermeasures
- Safeguard System on the Quality of Excellent Engineers Training
- Design Methodologies of Ship General Arrangements - A Review
- The Design and Simulation of Collision Avoidance System Based on Dual-Mode Collaborative
- Quantitative Risk Assessment and Early Warning for pH Value of Disqualified Imported Textile
- Discussions of Resource Utilization of Coal Gangue
- Research on Modes of Recycling and Remanufacturing with Considering the Carbon Footprint
- Spatiotemporal Distribution of Rainfall Erosivity in the Bailong River Basin, Gansu Province
- The Mineral Characteristics and Occurrence of Gold in Nali Gold Deposit, Guangxi
- Effect of Deficit Irrigation on Root-Shoot Development and Grain Yield of Winter Wheat