Manufacturing science and technology : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), July 29-31, 2011, Sanya, China /
Saved in:
Meeting name: | International Conference on Advanced Engineering Materials and Technology (2011 : Sanya Shi, China) |
---|---|
Imprint: | Durnten-Zurich : Trans Tech Publications, Ltd., 2011. |
Description: | 1 online resource |
Language: | English |
Series: | Advanced materials research ; v. 295-297 Advanced materials research ; v. 295-297. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11276089 |
Table of Contents:
- Study of the Sealing Characteristic of Polytetrafluoroethylene-Coated O-Ring Applied in Gas-Tight Deep-Sea Water Sampler
- Self-Assemble Behavior of Amphiphilic Diblock Copolymer of Methoxy Poly (Ethylene Glycol)/Polyester
- Preparation of Controlled Microporous High Speed Steel and its Composite Self-Lubrication Materials
- Research on In Situ Anionic Polymerization of PA6/PI Alloy
- Simplified Method for Considering Dynamic Second-Order Effects of Elastic SDOF System under Earthquakes
- Volatilization of MgO from Ludwigite in Carbothermal Reduction-Nitridation Process
- Study on Thermal and Mechanical Properties of Natural Rubber Latex Modified by Trichlorobromomethane
- Study of Fibre Tourmaline/PVA Nanofibre Prepared by Electrospinning
- The Application of Multi-Axial Warp Knitted Fabrics in Wind Turbine Blade
- Research on Diamond Wheel's Specialties during ELID Ulterprecision Grinding of Silicon Nitride
- Present Situation and Development Perspective of Soft-Contact Electromagnetic Continuous Casting Technology
- Studies on Multihollow PUA-EMA-St Crosslinked Copolymer Beads: Synthesis and Hollow Structure
- Synthesis and Characterization of Novel Functional Polymers from Hemicelluloses
- Production of Size-Selected CuXSn1-X Nanoclusters
- Synthesis and Properties of a New Diarylethene Bearing n-Hexyl for Holographic Optical Recording
- Test Research on the Surface Residual Stress of Dimensional Ultrasonic Vibration Grinding for Al2O3/ZrO2(n)
- Study of Latex Migration Mechanism during Coating Consolidation
- Study on Volatile Substances of Different Provenances Teak(Tectona Grandis L.f) Wood by TGA
- Preparation of Magnetic Expanded Graphite by Sol-Gel Method and its Electromagnetic Properties
- Preparation and Performance of TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite
- The Effect of Plasma Treatment on the Performance of Poly(lactide-Co-Glycolide) Fiber
- Study on the Relationship between Tensile Sample Lamination and Inner Quality of Q345 Slabs
- Study on Efficiency-Reinforcement Design Methods for Elastomeric Hydraulic Reciprocating Sealing
- Researches on the Properties of Stearate-Carboxymethyl Konjac Glucomannan Ester Prepared by Microwave Method
- Preparation and Ferroelectromagnetic Characteristics of Bi2SrNdNb2FeO12 Ceramic
- The Study on Gelatinization Pressure of Starch by Ultra-High Pressure Processing
- Study on Spheroidization of Tungsten Powders by RF Plasma Processing
- The Effect of Carbon Nanotubes on the Tribological Behaviors of PEEK Composites
- Structure and Magnetostrictive Properties of Tb0.2Pr0.8(Fe0.4Co0.6)1.9Bx Alloys
- Structure Characterization of Mg-Al Spinel Synthesized from Industrial Waste
- Synthesis of Silver Nanowires and Investigation of their Optical Limiting Properties
- #945;-Pinene Isomerization Catalyzed by a Nanometer Solid Superacid
- Thermo-Mechanical Properties and Microstructure of Al2O3-SiC-SiAlON Composites
- Study on the Durability of Concrete with Mineral Admixtures to Sulfate Attack by Wet-Dry Cycle Method
- Sol-Gel Combustion Synthesis of Nanocrystalline Cerium (IV) Oxide Powders
- Study on Microstructure of Quenched Martensite in W6Mo5Cr4V2 Steel
- Silica Nanowires Decorated with Cryptophane-A for Sensing Methane
- Study on Fire Resistance Design Parameters of RC Structure
- Study on Fast-Releasing Calcium Phosphate Cement for Accelerating the Release of Antibiotic
- Research on Surface Cracks of Thin Slab
- Study on Seismic Performance of Single Pylon Cable-Stayed Bridge at High Intensity Seismic Region
- Study on Technique of Induction Cladding Alloy Layer in Steel Tube Outer Wall and Property of Alloy Layer
- Synthesis, Optoelectronic Properties of a New Photochromic Diarylethene Bearing Benzothienyl and Malononitrile Group
- Synthesis, Optoelectronic Property and Application in Optical Memory of a Novel Type Diarylethene Based on a Six Unit
- Sythesis of a Novel Unsymmetrical Photochromic Diarylethene Compound Bearing a Six-Membered Aryl Unit
- Photochromism and Optical Storage of a Novel Unsymmetrical Diarylethene Based on Pyrazole and Benzofuran
- Synthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Based on Benzene Ring
- Photochromism of a New Unsymmetrical Diarylethene Bearing both Thiazole and a Methoxyl Group
- Synthesis#65292;Properties and Application in Optical Memory of a Novel Photochromic Diarylethene Bearing a Six-Membered Aryl Unit
- The Influence of Seismic Motion Input Direction and Damping on the Dynamic Analysis of Mega Steel-Frame Structure
- Study on Laser Welding Technology of Diamond Core Drill Bit
- Study on Earthquake Response Analysis of Reinforced Concrete Masonry Structure
- Preparation and Electromagnetic Properties of Poly(o-Toluidine)-BaAl2Fe10O19 Composites
- Wear and Mechanical Properties of Fe-28Al and Fe-28Al-10Ti Alloys
- Synthesis and Characterization of Polymethylsiloxane with Pendant Fluorocarbon Side Chains
- Research on Defect Detection Technology of C/C Composite
- Robust Adaptive Control for Gun Control System of Tank
- Synthesis and Light-Emtting Diodes Properties of Two New Fluorene Based Copolymers
- Water-Based UV-Curable Polyurethane Based on Wheat Straw Lignin Obtained by Ethanol Extraction
- Production of Nanosilica from Iron Tailing and Characterization
- Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Maleic Anhydride
- Study on the Compression Performance of CFRP Confined GFRP Short Column
- The Configuration and Evolution of Ti-Si-N Island on TiN(001) Surface: Ab Initio Study
- The Influence of Si Content on the Microstructure of Rapidly Solidified AlMnSi Foil
- Sintering Process of Mullite- Corundum Insulation Material with Nano Crystals
- Synergistic Effect between Montmorillonite Intercalated by Melamine and Intumescent Flame Retardant (IFR) on Polypropylene
- The Oxidation of Co-5Al Alloys in 1 Atm of Pure O2 at 700 and 800 OC
- Study on Microorganisms' Immobilization by Different Support Materials in the UASB System
- Preparation of TiO2 -Pillared Montmorillonite as Application to the Control of Blue Green Algae Growth in Eutrophic Water
- The Enhanced H2S Sensing Behavior of Ag-Doped Porous SnO2 Nanopowders Prepared by Template Method
- Solvothermal Synthesis of the SnO2 Nanomaterial for Highly Reversible Lithium Storage
- Optimum Gate Design of the Injection Mold on Plastic Air Intake Manifold of Engine Based on CAE Technique
- The Non-Combustibility of PTFE Fabric
- Studies on Diamond Brazing Process (Part one)
- Research and Development of a New Grouting Material for Blast Furnace
- Self Adaptive Modeling and Deposited Metal Property of Rapid GMAW Forming
- Synthesis of VO2(A) Nanostructures by a Hydrothermal Method and their Transition to VO2(M)
- Synthesis, Characterization and Optical Properties Based on a Novel Re(I) Emitter with Bulky Building Block
- The Rockburst Experiment Usage of Similar Material and the Mechanism of the Energy Releasing
- Pultrusion Technology Optimization for Hybrid Fiber Composites Based on DSC and Mechanical Property Testing
- Synthesis and Characterization of Chitosan Based Ultraviolet Absorber with Groups of Benzophenone
- Study on Formation and Exfoliation Mechanism of Alloy TP347H's Oxide Scale in Supercritical Boiler
- The Thermo-Mechanics Coupled Model of Polycrystalline Aggregates Based on Plastic Slip System in Crystals and their Interfaces
- Structure and Properties of Calcium-Magnesium-Silicate Ceramic Fiber with Nd2O3
- Study of Construction Management Maturity Model
- The Finite Element Analysis of Effect Factor about the Shear Behavior of Cold-Formed Steel Composite Wall
- Ultrafine #945;-Fe2O3 Nanoparticles: Facile Synthesis, Characterization and their Catalytic Activity on Ammonium Perchlorate
- Synthesis and Crystal Structure of a New 2D Coordination Polymer [Ce(3,4-pydc)2]*H2O(3,4-pydc = pyridine-3,4-dicarboxylate)
- Shearer Shaft Roundness Error of Signal Processing
- Sintering Kinetics of Self-Lubricating Ti-48%Al-2%Nb-2%Cr Alloys with Fluoride Lubricants
- Proportion Design of Concrete with Gravel-Crushed Proto-Machine-Made Sand
- The Effects of Hydrothermal Time on the Microstructure of Hollow Sphere Boehmite
- The Influence of Humidity on Burning Perfectibility of Molded Combustible Cartridge Case
- Study Situation and Key Technology of Mobile Humanoid Robot
- Study on the Shear Strength Parameters for Municipal Solid Waste with Higher Content of Organic Matter
- Study on Properties of Collagen/Chitosan Composite at Different Mass Ratios
- Thermodynamic Calculation of Al-Cu Eutectic Alloy with Microstructure Simulation Using Phase Field Method
- Research on Combined Lifting Conceptual Design for Large-Scale Ship
- Research on the Synthesis of Titanium Nitride by Carbothermal Reduction Nitriding with Anatase and Flake Graphite
- Replacement of Cement with Rice Husk Ash in Concrete
- Preparation of Glass Ceramic Made from Fly Ash
- Preparation and Features of Nano-ZrO2 / HA Coating on Surface of Titanium Materials in Dental-Implant
- Relationship between Microstructures and Mechanical Properties of Ti-6Al-4V Alloy in Centrifugal Casting
- The Study of Green Evaluation Support System in Manufacturing Process Based on Multi Agent
- Study of Anode Modification and Bias Voltage Treatment on Organic Solar Cells with Rubrene/ C60 Heterojunctions
- The Addition of a Nano-SiO2 on the Tribological Properties of PTFE Composite
- Quick Spherodizing in GCr15 Steel by Mechanism of Divorced Eutectoid
- Process Characterization of 40Cr Steel Roller by Laser Surface Alloying with Rare Earths Oxide Y2O3
- Preparation of Pt Colloids via a Wet-Chemical Method for Methanol Sensor
- Synthesis and Characterization of Nanosized Phpsphor SrS:Eu2+,Sm3+ by a Hydrothermal Process
- Test Research on Preparation of New Wall Material with Iron Tailings in Tangshan Area
- Thermally Stable Blue NaBaPO4: Eu2+ Phosphor Synthesized by Combustion Method
- The Research on Preparation and Application of a Silicon-Based Efficient Coagulant
- Synthesis and Luminescence Properties of Red Emitting Phosphors Na3CaB5O10:Eu3+
- Yellow-Orange Upconversion Luminescence in NaYF4:Er3+, Yb3+ Phosphor Synthesized by Microwave Combustion Method
- Study on Surface Cermets Reinforced by VC Particles Produced in Situ
- Recycling of Pultrusion Production Waste into Innovative Concrete-Polymer Composite Solutions
- Study on the Microstructure and Property of Manganese Steel Composites Strengthened by Ceramic
- Structural Stability and Mechanical Properties of Ni Nanowires under Different Orientation and Size
- The Relationship between the Biodiversity Conservation and the Traditional Beliefs of the Native People in Dalai Lake Biosphere Reserve
- Study on Mechanical Property of Al2O3-Based Composite Ceramics Liner of Heavy-Medium Cyclone
- The Comparison on Morphology and Histology of the Carassius auratus, Pelophylax nigromaculata and Oryctolagus cuniculus Lens
- Progress of Research on Chitosan
- Study on Reducing ASR Expansion in Concrete Prepared with Iron Ore Tailings Sand
- Research on Fatigue Life of the Casting Crane's Girder
- Study of Ship Propeller Cut and Effecting on Main Engine Running Parameters
- Synthesis Aligned ZnS Nanocone and its Photoluminescence
- Surface Photovoltage: an Efficient Tool of Evaluation of Photocatalytical Activity of Materials
- Simplied Calculation Method for Reinforcement of Rectangular Sectional Flexural Members Considering Crack Width
- Research of Plasma Clad Al2O3 Coating
- The Analysis on Causes of Rupture for a Sucker Rod Made of 20CrMo Alloy
- Study on the Application of the New Rock Drifting Technology in Zhangcun Colliery
- Study on Control Technology of Transverse Corner Cracks on CC Slab for Automobile Frame Steel Plate
- The Tensile Properties of Glass Fiber Reinforced ABS Composites Filled with SiO2
- The Mechanical and Tribological Properties of a Polyurethane Composite Filled with CNT
- The Staged Construction Plan of Free Way Asphalt Pavement
- Preparation of Microcrystalline Cellulose from Cotton Linter Ethanol Pulp
- Study on Rutting Resistance of Polyacrylonitrile Fiber Asphalt Mixture
- Research on the Load to Ground on Missile Erection and Launching
- Study on Cu-Based Catalysts for Synthesis of Indole
- Synthesis and Characterization of Ultrafine Nanocrystalline Ti-Al Nanoparticles
- The Experiment Study on Making Ultrafine Superfine Nickel Powder by N2H4-KHB Reduction and H2 Reduction
- The Die Design and Implementation of the Path Trail about Step-by-Step Forming Section
- Solidification Simulation of Huge Rectangular Ingot by Different Intensive Cooling
- Study on the Method of Adjustment Skateboard by Dial Indicator to Turning Cone
- Oxidation Behavior of 2Cr12NiMoWV Steel in High-Temperature and High- Pressure Water Vapor
- Synthesis and Characterization of LiNi0.4Co0.2Mn0.4O2 Cathode Material via Urea Co-Precipitation Method
- Study on Practical Calculation Equation of Concrete Strength Criterion under Tension Condition
- The Random Calculation Model of Chloride Ion Concentration in Concrete
- The Effect on Heterogeneous Nucleation of Solute Segregation
- Water Modelling on the Effect of Trapezoidal Nozzle on Vortex during Teeming in Ladle
- Thermo-Mechanical Behavior of Fiber Reinforced MMC
- Permeability Test Method of Concrete Member under Uniaxial Tension Stress
- Static Recrystallization of Magnesium Alloy during TRC-HC Deformation Followed by Annealing
- Preparation of Cationic Cellulose Obtained from Wood Pulp Using the Microwave
- The Design of Automatic Test System of High Speed PCM Signals
- Study on the Preparation of TiN Nano-Particles in a Solidified Low Alloy Steel
- Properties and Morphology of Damping Composite Consisting of Polyester-Type Polyurethane/Epoxy Resin
- Research Advance in Harmful Effects and Removal of Impurity Fe from Al and Al Alloys
- The Study on Pulping and Papermaking Performance of Banana Stem and Leaf
- The Study on the Bond Strength between Gunning Formed Lining and Surface of Stave with Anchors
- Research of Mechanical Properties of Ni-Ti-Nb Alloys on Low Temperature and Restriction Behavior
- Control of Nitrogen Loss during Co-Composting of Banana Stems with Chicken Manure
- Study of Substrate Induced Deep Level Defects in Bulk GaN Layers Grown by Molecular Beam Epitaxy Using Deep Level Transient Spectroscopy
- Research on Deformation Error of Links of Parallel Robot
- Studies on Cutting Forces of High Volume Fraction SiCp/Al Composites with Ultrasonic Vibration High Speed Milling
- Preparation of Novel Series of UV Dual Curable Polyurethane-Modified Epoxy Monoacrylates and their Films Properties
- Research on the Extraction of Collagen from Scales of Tilapia
- Research on New Varying Gear Ratio System
- The Thermal and Di-Electric Properties of a Silicone-Based Thermal Pad
- The Controlled Synthesis of Single-Crystalline Cd(OH)2 Nanoparticles with Different Morphologies
- Study on the Use of Rhodamine Doped Nanocomposite for Latent Fingerprint Detection
- The Error Model Analysis in Wireless Network Base on the Network Simulator Tool
- The Study on the Early Age Cracking due to the Addition of Silica Fume into Concrete and the Trouble-Shooting Strategy
- Study on Cost Modeling Based on Feature Mapping Technology
- Precise-Micro PECM System and its Applications Combining Synchronizing Ultrasonical Vibration
- Study on the Preparation of Cu/n-SiO2 Composite Particles by Mechanical Milling
- Preparation of Graphene/CdS-Nanobelt Nanocomposites
- Synthesis and Photocatalytic Properties of Fe-Doped TiO2 Nanobelts
- Modelling of Cyclic Plasticity and Viscoplasticity of Directionally Solified DZ125 Superalloy: Part I: Estimating the Parameters of Chaboche Constitutive Equations
- Combustion Synthesis and Luminescence Properties of NaY1-XTbX(WO4)2 Novel Green Phosphors
- Optimization of the Synthesis of Er-Y-Ba-Na Quaternary Fluoride up-Conversion Phosphor and Luminescence Properties
- Composition and Microstructure of a Natural Nano-Structure Mineral: Six-Ring Rock
- Evaluation of Permeability of Porous Concrete
- Interfacial Behaviors in SiC Fiber Reinforced Titanium Matrix Composites during Thermal Exposure
- Enhanced Infrared Normal Spectral Emissivity of Microstructured Silicon at 100 to 200°C
- Aluminate Green Phosphor with Small Particle Size Used for PDP via Co-Precipitation Method
- Investigation of the Corrosion Resistance of Bainitic Steel
- Effects of Metallic Ions on Photoluminescence Properties of CdSe/PAMAM Nanocomposites and their Application in Fingerprint Detection
- Energy Conservation Study on Integrated Thermal Insulation Buildings Made of Glazed Hollow Beads Mortar
- Electrochemical Characterization of Metal Oxynitride Thin Film as New Lithium Storage Materials
- Cases Analysis of Nonconformity in Ultrasonic Flaw Detection for Steel Plates
- Fabrication of Superhydrophobic Surfaces on Copper Foil with Stearic Acid
- Microstructures and Mechanical Properties of Mg-6Al-1Zn-xSn (x=0.5, 1, 2 and 3.5 Wt%) Alloys during Solution Treatment at 420°C
- Differential Scanning Calorimetry (DSC) Analysis of Abaca Fibre (Musa Textile Nee) Reinforced High Impact Polystyrene (HIPS) Composites
- Analysis on the Cause of Longitudinal Crack on the Hot-Rolled Ribbed Bar Surface
- Influence of Temperature on the Absorption Behaviour between Cement and Asphalt Emulsion in CA Mortar
- Hydration Kinetics of Aluminate Cement Containing Magnesium Aluminate Spinel
- In Situ Synthesis Process for TiC Whisker Toughening Al2O3-Based Ceramic Cutting Tool Composite
- Finite Element Analysis of Interfacial Stress of Mg-Baced Composites Reinforced with Short Fiber
- Experimental Study on the Fundamental Characteristics of Recycled Concrete
- Microstructure and Properties of High Carbon Equivalent Gray Cast Iron Modified by Rare Earth
- Influence of MgO on Properties and Microstructure of Mullite Ceramics Synthesized from Coal Fly Ash
- Effects of Mixed RE on Die-Casting Microstructures and Properties of Commercial Mg Alloy
- Magnetostriction of Epoxy-Bonded Tb0.22Dy0.48Pr0.3(Fe0.9B0.1)1.93 Composites
- A Study of Preference Relation for the Mould Bidding Strategy Based on Rough Set
- Enhancing Electrochromic Property of 1,4-Di(thiophen-3-Yl)benzene by Copolymerization with Pyrene
- Microstructure Refinement in Non-Quenched and Tempered Vanadium-Nitrogen Steel
- Influence of Temperature Rise during Finishing Rolling on the Mechanical Properties of T8 Cord Steel
- Influence of Hydrogen on the Plasmas Nitriding Process of 35CrMo Steel
- Effect of Yttrium and Magnesium Segregation on Microstructure and Mechanical Properties of Heavy Section Ductile Iron Castings
- Numerical Simulation of Flowage and Bath Surface Behavior in Continuous Casting Mold with Electromagnetic Brake
- Novel Optical Fiber Gas Sensing System Based on FBG Filtering
- A Method for Lamping Atoms into Particles in Particle Dynamic Method
- Efficient Synthesis, Photochromism and Application of a Photochromic Diarylethene Bearing a Benzene Unit
- Efficient Synthesis, Photochromism and Holographic Optical Recording of a Photochromic Diarylethene with a Isoxazole Unit
- Effects of Rare Earth Dopants on Crystal Structures of Bismuth Molybdate Catalysts
- A Novel Electron Paramagnetic Resonance Phenomenon in a Barium Stronium Titanate Ceramic
- Control of Nitrogen in Al-Killed Steel by Converter Flow
- Annealing on the Electrical and Dielectric Properties of Barium Strontium Titanate
- New Digital Method of Reverse Engineering about Free from Surface
- Efficient Synthesis and Properties of a Photochromic Diarylethene Bearing Thiophene and Isoxazole Moieties
- Electro-Generation of 2, 3, 5, 6-TCP in Zn, Ni,P-mSA/mCS Bipolar Membrane Equipped Electrolysis Cell
- Deflection Test on CFST Arch Bridge with CFRP Slings
- Model Study about the Influence of Superheat on Macrosegregation Formation in Continuously Cast Bloom of Special Steel
- Air-Water Interfacial Film of Zirconia and its Heat-Treatment
- Effects of Milling Time and Annealing Schedule on Mechanical Activation Synthesis of Brownmillerite Structural Ca2Fe2O5
- Microstructures of In Situ Synthesized ZrB2/AZ91 Magnesium Matrix Composite Synthesized by a New Method of Direct Melt Reaction
- OH-related Infrared Absorption Spectra in Silicate Glasses
- Effect of Hole Distance and Hole Number on Bubble Behavior during Gas Injection with Multi-Hole Orifices
- Experiment on Treating the Dying Wastewater with Blast-Furnace Ash and Fenton Reagent
- Characterization of Electrochemically Synthesized Pani on Graphite Electrode Use EIS
- A Novel CuO-TiO2 Composite Photocatalyst and its Degradation of Methyl Orange under UV Irradiation
- A New Photochromic Diarylethene for Optical Storage
- Effects of Polypropylene Fiber on Shrinkage of Masonry Cement Mortar
- Analysis of CTOD Test for Proving Rings of Large-Scale Fully-Welded Ball Valves
- Numerical Simulation of Interaction between Coal Derrick and Foundation in Freeze - Thaw Process
- Methods and Equipment of Vacuum and Electromagnetism Suspending Distillation for Fine of Non-Ferrous Metals
- A Simple Method of Cyclization of the 2'-Hydroxychalcone with Polystyrene-Pyridine Resine under Mild Conditions
- Morphology and Electrical Properties of Nano-Sized LiFePO4 Cathode Materials
- Development and Application of Cold-Formed Steel Structure Dwelling System
- Influence of La and Ce on Microstructure and Properties of Cu-Cr-Zr Alloy
- Optimization Design of Signal Source Based on FPGA
- High Overload Penetration Test and Analysis of the Multi-Layer Steel Target
- Effects of Gadolinium on Aging Behavior and Mechanical Properties of Mg-5Y-3Nd-Zr Alloy
- Long-Term Performance Research on Reinforced Concreted Beams with Pre-Stressed CFRP Plate
- Effects of Synthesis-Solvent on Characteristics of Poly(N-Isopropylacrylamide) Hydrogels Synthesized by Frontal Polymerization
- Development and Design of Coal Gangue Concrete Filling Material
- Effects of Various Plasticizers on the Moisture Sorption and Mechanical Properties of Gelatin-Chitosan Composite Films
- Influence of Temperature and Relative Humidity on Perm-Selectivity of PET Packaging Film
- APCVD Deposition of Si Film on SiO2 Patterned Si (111) Substrates for Solar Cells
- Bending Properties of Three-Layer Biaxial Weft Knitted Fabric Reinforced Composite Materials
- Development and Evaluation of a High-Strength and Anti-High Temperature Pre-Crosslinking Gel
- DSC and TEM Study of Al-Cu-Mg-Ag Alloy Ageing at Low and Elevated Temperature
- Measuring Methods of Cable Tension in Cable-Stayed Bridges
- Kinetics of Reductive Dechlorination of DDT in Soil with Zero-Valent Iron
- Evaluation of Optical Path Designing on 4x4 Cm2 Er3+/Yb3+ Doped Phosphate Glass Waveguide Substrate
- Load-Carrying Capacity Analysis for Sinusoidal Surfaces Hydrodynamic Bearing
- Control of Cold Welding Cracks in 30CrMnSi Steel by Welding with Trailing Impacting and Rolling
- Crystallization Kinetics of ZrCuAlSiY Bulk Metallic Glass
- Influence of Limestone Powder on Immobilization of Chlorine Ion of Portland Cement
- Based on CSP Technics, the Experimental Research of Rare Earth Steel Hot-Rolled Deformation Behaviors
- New Method of Spherical Surface Defect Detection Based on Machine Vision
- In Situ Template Synthesis Titania Nanotube Array Films on Aluminum Plate
- Development of Electromagnetic Swirling Flow in Immersion Nozzle in Continuous Casting Process of Steel
- High Polaried Transmission Effects for Double-Layer Metallic Grating Films on GaN Substrate
- Effect of Thermomechanical Parameters on the Microstructure and Retained Austenite Characteristics in a Hot-Rolled TRIP Steel
- Fabrication and Luminescent Properties of Translucent Ce3+:Lu2SiO5 Ceramics by Spark Plasma Sintering
- Ab Initio Calculation of (001) TiAl3/Al Interface
- Investigation of Very High Cycle Fatigue Behavior of TC17 Alloy
- Microstructures and Properties of Laser Cladding Composite Coating of Nano-Y2O3/Co-Based Alloys
- First-Principles Calculations for Electronic Structures of Flourine-Doped ZnO
- Influence of the Concentration of La High Doping on Conduction of ZnO
- A New Approach to Solving Reliability Optimization Design of Gear Box
- Materials and Fabrication Issues of Micro V-Groove for Optoelectronics Packaging
- Analysis of the Dry Mortar Produced with Iron Tailings
- Numerical Simulation of Canned Hot-Extrusion Process of Mo Powder
- Fabrication of Al/SiC Nanocomposite Powders via In Situ Powder Metallurgy Method
- Dynamic Analysis of Piezoelectric Smart Structures
- Optimization of Steel A20402#8242;Parameters under Pulse Electric Field
- Microstructure, Mechanical and Shielding Properties of Fe67.5Ni23.5B9 Coating / 321 Stainless Steel Laminated Composite by the Air-Plasma Spraying Procedure
- Effects of Ultrasonic on Ability of Learning and Memory in Kunming Mice
- A Study on Dynamics of 2-PRR Parallel Machine Tool Based on the Lagrange Equation
- Effects of Microstructure and Mechanics Performance of Laser Clad with Different Base
- An Efficient Synthesis of 5-Arylidene Barbiuric and Thiobarbituric Acids Catalyzed by Mg(NTf2)2 in Water
- Application and Research of Superfine Wood Powder Disintegrator with Multi- Granularity Based on AR Technology
- Natural Convection Heat Transfer of the PCM Microcapsule Slurry for a Solid Phase State in a Horizontal Rectangular Enclosure
- Microwave Assisted Synthesis of ZnO Calthrop-Like Nanostructures in Ionic-Liquid
- Microstructure and Corrosion Resistant Property Research of Super 304H and TP347H Heat-Resistant Steel Welding Joint
- Dielectric Properties of Carbon-Materials-Filled Composites Characterized by Terahertz Time-Domain Spectroscopy
- Controlled Fabrication and Properties of Ce0.5Zr0.5O 2 Solid Solutions
- Effect of Rare Earth Nano-Oxides on Sintering and Crystallization of Fused Quartz Ceramic Materials
- Effect of Substrates on the Characteristics of Silicon Carbide Deposited from Methyltrichlorosilane
- Finite Element Analysis on Temperature Field of Laser Brazing
- Enhanced Photocatalytic Activity of TiO2 by (Tetracarboxyphthalocyaninatio) Cobalt (II)
- Alloying Element Nickel Influence on Microstructure and Properties of Weathering Steels
- Analysis on Structural Property and Seismic Performance of the P'ai-Lou Gateways in Xi'an Great Mosque
- Decolorization of Methylene Blue Dye Wastewater by Fenton's Reagent
- Electron Transport of Right-Angle Graphene Nanoribbons
- Coherent Phonon in Single-Walled Carbon Nanotubes by Using a few-Cycle Pulse Laser
- G12V190 Type Diesel Engine Exhaust Muffler Design Based on Transfer Matrix Method
- Influence of Ultrasonic Vibration on Preparation for Semi-Solid A356 Alloy
- Martensitic Transformation in a Low-Alloy Ultra-High-Strength Steel
- Critical Cooling Rate and Design of Mould Cooling System for Hot Forming of High-Strength Sheet
- Alloy Design and Practice of High Carbon Alloy Steels with Ultra-Fine Carbide
- Microwave Hydrothermal Synthesis of ZrSiO4 Nano-Powders
- Experimental Study on the Seismic Performance of Composite Shear Wall Structure with Thermal-Insulation Wall Form
- Chemically-Induced Graft Copolymerization of Diethylenetriamine onto Bagasse Celluloses
- Experimental Study and Finite Element Analysis of the Seismic Behaviors for Steel Fiber Reinforced High-Strength Concrete Frame Exterior Joints
- Effects of Occupation of the Cages on Thermodynamic Stability of SI CO2 Clathrate Hydrate
- Influence of Heat Treatment on the Structure and Performance of ATP and its Catalyzer
- Mechanical Properties and Applications of Carbon Nanotubes
- Effect on Electroless Nickel Coating on Magnesium Alloy by Nickel Electroless Plating Parameters
- CuInS2 Thin Films Obtained by Spray Pyrolysis Deposition Using Sodium Dodecyl Sulfate Additive in Precursors Solution
- Effect of Die-Swell Ratio on Polyacrylonitrile As-Spun Fiber Formation
- A Theoretic Study on Cam-Clamping Device
- Effects of Computational Parameters on Solidification Structures Simulated with Phase-Field Method for a Ni-Cu Binary Alloy
- Infrared Thermographic Diagnosis Mechnism for Fault Detection of Ball Bearing under Dynamic Loading Conditions
- From Layered Ni(OH)2 Thin Films to Ni(so4)0.3(OH)1.4 Nanobelts through so42- Inserting in Colloid-Based Route
- A General Sonochemical Approach to Rapid Synthesis of 1D Single-Crystalline MSn(OH)6 (M=Ba, Ca, Sr) Nanostructures
- The Sonochemical Fabrication for the CaCO3 Nanocrystals with Different Morphologies
- Design Optimization of the Aerial Lift Boom through the Finite-Element Analysis (FEA)
- Determination of Ge Fraction and Carrier Concentration in Si1-XGex/Si by Capacitance-Voltage Method
- Mechanical and Tribological Properties of Nylon 1212 Modified with Brown Corundum Ash and Solid Lubricants
- A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores
- Study on the Finite Element Method for Three-Dimensional Static Property of Polyurethane Vibration Isolators
- Characterization of Ni and Ni-Co Alloy Coatings Prepared by Pulse Current Electroplating
- Experimental Study of the Packaging Failure for Optical Fiber Arrays
- The Morphology of SiOx Coated PET Film by Ultrasonic Atomic Force Microscopy and Barrier Properties
- Springback Simulation in Stretch Bending of Aluminum Extrusions Using Static Implicit and Dynamic Explicit FE Codes
- Preparation and Characterization of Superhydrophobic Polypropylene Surface with Excellent Self-Cleaning Property
- Anglicizing Modern High-Rise Building Modeling Design Technique
- The Effect of Alkaline Slurry on Low-K Film
- Impact of Process Parameters on the Auto Claw-Pole Thixoforming Process
- Effect of Floating Die on Tooth Filling of Spur Gear Forging
- Effect of Mandrel Exchange on the Precision Forging of Spur Gear
- Surface Characteristic of Wheat Straw Treated with Plasma
- Formation Mechanism of Linear Explosive Formed Penetrator by Midpoint Initiating Manner
- Study on Microstructure and Performance of Bead-on-Plate Weld Metal on 21CrMoV5.11 Steel Continuous Casting Roll by Submerged-Arc Overlaying
- Design and Simulation of Molded Interconnect Devices with Two Shot Molding
- The Analysis of Tube Spinning Process Parameters on Workpiece Defects
- Effect of Acid Treatment on Surface Morphology and Strength of Float Glass under Ultrasonic Wave
- Microstructure and Properties of Laser Cladding Co-Based Alloy Coatings
- Influence of Inhibition Layer on Adhesion of a Galvanized High Al Dual Phase Steel
- Synthesis and Character of Amphiphobic Calcium Carbonate Nanoparticles In Situ
- An Alkaline Hydrothermal Method to Synthesize Super-Hydrophobic Wood
- In Situ Formation of ZrO2-Y2O3-Containing Ceramic Coating on Magnesium Alloy by Plasma Electrolytic Oxidation
- Research about the Crackle-Simulated Coating Technology Applied in the Rice-Straw Board Furniture Surface Decorating
- Formability of AZ31B Magnesium Alloy Sheet in Hydro-Bugling by Pulsating Hydraulic Pressure
- Effects of the Low Frequency Electromagnetic Field on the Centerline Macrosegregation of 7075 Aluminum Ingots
- Effect of Different Modified Mechanism on Mechanical and Cutting Properties of WC-Co(Ni)
- Design and Optimization of Technology and Structure Parameters for Sheet Metal Drawing by Orthogonal Experiment
- Microstructures and Mechanical Properties of the Mg-5Y- MM Alloys
- Effects of Asymmetric Bending on Wear of Rolls in a Six-High Cold Rolling Mill
- Analysis of Forward Spinning for Aluminium Alloy Tube
- On Formability of MoNiCr Alloy
- Dynamic Instability of Spatial Structures under Typical Wind Flow
- Proton Transfer in Proton Exchange Membrane Based on RDF
- Preparation and Processing of PZT Thin Film by Liquid Mist Microwave Plasma Enhanced Chemical Vapour Deposition
- A Feasibility Study on Increasing Surface Hardness of Austenitic Stainless Steels by Pack Co-Deposition of N and Cr
- Management of Bio-Engineering Equipment - Take Ventilation and Mechanical Agitation Fermenter for Example
- Overload Control of Supersonic Missile System
- Modeling and Dynamic Simulation of Tracked Vehicle in Vortex
- A Steering Wheel System and Controller for the Driving Simulator
- Supersonic Missile Control with PI Sliding Mode Method
- Analysis of Characteristics of Potential Mud-Rock Flow in Huyu Valley
- Consider the Effect of the Variation of Underground Water Level to the Superstructure with the Pile Foundation in Different Burying Depth
- Construction of Customer Knowledge Management Platform Based on TRIZ
- Micro-Hole Machined by Electrochemical Discharge Machining (ECDM) with High Speed Rotating Cathode
- Study on Straight Edge Cutter for Processing Circular Arc Tooth Belt Pulley
- Confined Buckling Analysis of a Viscoelastic Ring Subjected to Constant Temperature Difference
- Experimental Research on the Screening Efficiency of Particle Impact Drilling Separation System
- The Study and Realization of Online Submission and Peer Review System Based on AOP
- An Improved Active Queue Management Algorithm Based on Nonlinear Smoothing
- To Simulate the Flow Field of Jet Pumps of Plane Model by Using Monte Carlo Method
- Role of Shear Strain for a General Modeling of Magnetostrictive Film-Substrate System
- Different Management Goal of the Coal Enterprise Marketing Strategy
- Decision Model Research of Production Model Based on Fuzzy Theory
- The Application of Low-Frequency and Low-Power Ultrasound Algae Removal Technology in Pengxi River in Three Gorges Area
- Research on Diamond Polishing Process Based on Rough Set
- Optimization of Chlorella pyrenoidosa Removal by Low Frequency Ultrasonic Irradiation Using Response Surface Design
- Experimental Research on Impact Force and Erosion Effect of Different Hydraulic Pressure
- Deformation Characteristics Research of Large Span Aqueduct under Impounding Conditions
- Study on the Brazing Technology and Mechanical Properties Using bmp7 Filler Metal
- Fatigue Behavior of the Low-Strength Steel Welded Joints Treated by TIG Dressing and Ultrasonic Peening Combined Method
- The Impact of LPG Storage Tank Steel Specimen Fracture Analysis of Welded Joints
- Research on the Effect of Ultrasonic Impact Peening on the Fatigue Property of 7075-T651 Aluminum Alloy
- Welding Thermo Cycle and HAZ Softening of CT80 Butt Weld Joint
- Numerical Simulation of Welding Residual Stress Considering Phase Transformation Effects
- Research on Ultra-High Cycle Fatigue Property of 45 Steel
- Study on Microstructure and Performance of Bonding-FSSW Hybrid Joints of AZ31 Magnesium Alloy
- Effect of Ar-N2 Mixed Gas on Morphology and Microstructure of Type 316L Stainless Steel TIG Weld Metal
- Tensile Property for Friction Welded Aluminum Alloy 7075-T6 and 7075-T6
- Mechanical Property of Friction Stir Welded Retardant Magnesium Alloy Joint
- Study on DC Double Pulse MIG Welding of Automobile Aluminum Alloy
- A Study of Temper Bead Technique on A508 Steel Welds
- Leveraging Heterogeneity Make Resource Location Efficient in Peer-to-Peer Networks
- Microstructure and Damping Property of the Composite Discontinuous NiTi SMA Thin Films Deposited on PZT Substrate
- Structural and Optical Properties of Zn1-XCoXO Thin Films Fabricated by Laser Molecular Beam Epitaxy
- Recent Developments in Microextraction Related Techniques for Trace Environmental Analysis
- Growth and Field Emission Properties of the Carbon Complex Films
- Modeling and Simulation Study on the Complex Seepage Mechanism of Porous Electrode for a Proton Exchange Membrane Fuel Cell
- Fabrication and Photocatalytic Activity of ZnO-TiO2 Nanofibers
- Researches on the Treatment of the Row Hemp
- Experimental Study of Heat Pipe Exchanger for High Power LED Cooling System
- Study on Properties of Bast Fibers
- The Dispersion of CNT and the Conductive Property of PA6/MWNTs Nanofiber Filaments by Electrospinning
- Study on the Application of Fringe Curling in Knitwear
- Effects of Temperature on the Impedance of PEM Fuel Cell
- Microstructure of CrN-Based Nano Composite Solid Lubrication Films
- Growth and Application of High Quality ZnO Films Grown on Diamond Substrates
- Preparation and Study of Strong Magnetoelectric Coupling on Multiferroic BaTiO3/La0.7Sr0.3MnO3 Bilayer Heterostructure
- Investigations on Properties of PE/PET Bicomponent Spunbonded Nonwovens
- Ground Movement during Concrete Pipe Piles Jacking in Silt Deposit
- Establishment of Ink Penetration Model and the Calculation of Penetration Depth inside Paper
- Effects of the Velocity of Ink Distributing Roller on Ink Tack Value
- Effect of Thermal Load on Mechanical Properties of Ni/YSZ Anode Support Micro Tubular Solid Oxide Fuel Cell
- Gray Cluster Analysis on Thermal-Moisture Comfort of Bamboo Fiber Socks
- Pb(II)-Imprinted Polymer Prepared by Graft Copolymerization of Acrylic Acid onto Cellulose
- Thickness Dependence of Electrical Properties in Poly(vinylidene Fluoride Trifluoroethylene) Copolymer Thin Films
- Definition of Cohesive Zone in COREX Melter Gasifier Using Image Processing Method
- Synthesis of NiCr Nano Oxides as Anode Electrocatalysts for Direct Methanol Fuel Cell
- Research Progress of Stress Superimposing Method for Residual Stress Determination
- Strength and Finite Element Analysis of the Boom System of Truck-Mounted Concrete Pump
- Research Progress and Perspective of Reduction Removal of Phosphorus in Steel Slag
- Study on the Separation of Waste Polyester-Cotton Fiber with Dilute Acid
- Cracking Mechanism of RCC Dam Surface and Prevention Method
- Numerical Simulation of Fracture Process of Three-Point Bending Beam of Concrete Based on Modified Mazars Model
- Effect of Ultrasonic Vibration on Friction and Wear Properties of GCr15/45# Steel Frictional Pairs under Oil Lubrication
- Analysis of a New Magnetic Bearing for Magnetic Levitation Stages
- Numerical Simulation of Temperature Field of Direct Laser Metal Deposition Shaping Process of Titanium Alloys
- Research on the Dynamic Performance and Mechanical Model of the Single Rod MRD without Accumulator
- ADAMS MATLAB Co-Simulation of Dynamics Parallel Manipulator
- Failure Analysis of Drill Collar Box Fracture
- Study on the Impact of Wind Load on Large Crawler Crane Typical Truss Structure
- Reliablity Analysis of Large-Span Undergroud Cavern Stability in Jinchuan Mine
- Effect of White Noise and Dichotomous Noise in a Bistable System
- Role of Time Delay and Noise Color in Bistable System with Dichotomous Noise
- A Continuous Fluxless Purification Technique for Mg Scrap Melt
- Acoustic Property Prediction of an Automobile Air Filter with Acoustical BEM
- Research on Long-Span Old Bridge's Dynamic Reliability under Vehicular Load
- Towards Simulation of Fresh Granular-Cement Paste Material Behavior
- Consistency Assessment Method for Granular- Cement Paste Systems
- The Research of Angle Measurement between Cone and Support Rods Located at ICF Target
- Study on the Flutter Model of the Imaging Quality of TDICCD Space Camera
- Synchronization Analysis of the Double Exciting Motors in Nonlinear Vibration System Based on Reaching Law
- Identify for Scroll Compressor Noise Using Vibration Signal Based on Neural Network
- Study of Flotation Deinking Efficiency of Old Newspaper and Old Magazine
- Numerical Simulation and Analysis of Hydraulic Excitation System Based on Water Hammer by the Method of Characteristics
- Numerical Simulation and Experimental Analysis of an Active Hydraulic Excitation System Based on Pulsating Flow
- The Investigation of the Influence of Dynamics Parameters on the Friction-Induced Self-Excited Vibration
- Effect of Pre-Strain and Roller Working on Torsional Fatigue Properties of a Structural Steel
- The Research of the Influence of Damping on Automonile Brake Groan
- Potential Routes for Recycling and Reuse of Silicon Kerf
- Method to Construct Elementary Dependent Function Based on Weights of Characteristics
- An Approach to Real Exhibition of the Yarn Texture in the Simulation of the Fabric Appearance
- AR Bispectrum Characteristics of Block Forming Machine's Vibration Driven by Hydraulic Exciter
- Numerical Simulation of Double-Deck Metal Cylindrical Tube Crashed under Inside-Explosive Loading
- Grinding Wheel Carriage Mode Analysis of Vertical Glass Edging Machine
- The Effects of Rolling and Annealing on the High Speed Impact Deformation Behavior of Mg-3%Li-1%Nd Alloy
- Recovery Methods of Germanium
- Research on Fault Diagnosis for Rotating Machinery Vibration of Aero-Engine Based on Wavelet Transformation and Probabilistic Neural Network
- Effect of Oxygen Partial Pressure and Temperature on Liquidus for the CaO-SiO2-FeOx-Al2O3 System
- On the Tensile Stress and Damage Accumulation during Equal Channel Angular Extrusion
- Thermodynamic Study on Production of Fe-Si-Mn Alloy from Adjusted Converter Slag
- Dynamic Performance of the Bearing-Rotor System in the Ultra-High Speed Electric Spindle with a Additional Supporting System Make up of the Permanent Magnetic Bearings
- Improving Design of Muffler Based on Three-Dimension Numerical Calculation of Fluid and Sound Field
- Study on Seismic Response Reduction of a Long-Span Cable-Stayed Bridge by Adding Viscous Dampers at the Different Positions
- The Limitation of Evaluating Thermal Shock Resistance of Al2O3-SiO2 Refractory by Measuring Strength Loss Rate
- Study of the Multiaxial Fatigue Life Influencing Factors Based on the Critical Plane Approach
- Simulation of the Temperature Distribution of Gradient Ti-TiB Composites Prepared by Spark Plasma Sintering Process
- Broadband Tunable Infrared Source and its Harmonic Generation
- Recycling of Fiber-Metal Laminates
- A Modified Implicit Iterative Difference Algorithm for Stiff Chemical Kinetic Equations in Complex Combustion System
- Research of Laser Welding for Hot Rolling Strip Steel
- Safety Model Comprehensive Judgement Application for Dike Construction Risk Evaluation System Research
- Dissimilar Laser Welding of Ti-6Al-4V to Ti-6Al-6V-2Sn
- Na-Bentonite Anti-Seepage's Ecological Technology and Ecological Effects in Urban River Bio-Remediation
- Comparison of Dry-Film and Zinc-Phosphate Lubricant for Tube Cold Forming
- Parametric Study on Fatigue Life Design of Shaft with Holes
- Microstructure and Fracture Behavior of Ceramic Particle Reinforced Composite Bond with the Assistance of Ultrasonic Waves
- Policy Planning for Environmentally Sustainable Transport in Beijing, China
- Calculation of Sound Radiation Power at Two Ends of Duct System
- Effect of Plasma Nitriding on Ultra-High Cycle Fatigue Behaviors of Ti-6Al-4V
- Synthesis and Characterization of Highly Cross-Link Polysiloxane Based on 2,4,6,8- Tetramethyl-2,4,6,8- Tetravinylcyclotetrasiloxane
- Force Calculation of Shunqiao Trench-Buried Inverted Siphon Structure
- Research of Stress and Deformation Distributions in Central Incisors Restored with Different Glass Fiber Post Types
- CAD/CAM of the SPROCKET and the EFFICIENCY TEST
- Simulative Analysis for Reinforced Concrete Face Rockfill Dam of Qianqiao Reservoir
- Blast Pressure Analysis of a Pressure Vessel
- Stochastic Seepage Field Studies on Main Embankment of Yangtse Rive in Southern Jingzhou Zone of China
- Research of FWP Process Deformation Compensation Forecasting on the Basis of TS-FNN
- Optimization Study on FRP Bolt-End Structure Parameters
- Wireless Monitoring and Scheduling System of Urban Water Supply Network
- Concurrent Design of the Petroleum Drilling Machine Based on PDM Platform
- Experiment Study on Influence of Knowledge Acquisition Ability on Product Innovation Quality
- Research of System of High-Rise Building Steel Structure Construction Based on AHP-Fuzzy Comprehensive Evaluation
- Reliability Study on Physical Layer of CAN Bus in Engineering Application
- Study on Antenna Structure Technology for Realizing Passing Zenith Tracing
- Research on Parametric Design of Dedicated Computer
- Optimum Design Study of Hydraulic Hatch Cover on Buckling Strength
- PLC Sequence Control System of Special Drill Machine
- Based on Pro/E High Speed Milling of Thin-Walled Stents of Research
- The Monitoring System of the Hoister Based on Virtual Instrument
- An Accurate Exposure Time Measurement Method of CCD Cameras
- Finite Element Optimization Design of the Drum of Storage Winch
- Research on Virtual Design System for Spindle of High-Speed Machining Center
- Simulation of Kinematic Movement for Invert Arch Floor of Plunge Pool with Numerical Manifold Method
- An Improved Genetic Algorithm Based on K2(m) Triangulation of Continuous Self-Mapping
- A Novel CNC Grinding Method for Relief Surface Based on a CAM System
- Structural Optimization Based on Stochastic Finite Element Analysis and Optimality Criteria Methods
- Wave-Induced Load Study on a Deck Barge
- The Impact of Meshing Transmission of Arc Gear by Hobbing Method and Central Distance Error
- Research on Semi Physical Test System of PCU on Satellite
- The Virtual Prototyping Design for AKD Rolled Steel Bundling
- Mechanical System Dynamics Simulation of Crank Linkage Mechanism Based on Pro/E
- Velocity Measurement Based on Alternate M/T Method and Incremental Optical Encoder
- Research on Speed Optimization of ESPCP System under Different Conditions Based on Neural Network
- Design of Experiment, Approximate Model and Optimization of a Muzzle Brake
- Research and Creation of Printing-Like Effect Digital Jacquard Fabric
- The SINS Algorithm Simulation Based on GUI
- Research on Parametric Design of Customized Products Based on Database
- Discussion on the Modeling Design of New Times Table Lamp
- The Design of Calibration Software of Sensor Characteristics Based on LabVIEW
- Design and Research on New Type Fitness Washing Machine
- Research on Brushless Permanent-Magnet DC Motor of Electric Scooter Based on Ansoft
- Research on Rapid Detection of Vitamin C with an Optic Sensor
- Quadruple-Arc Gear Design, Digital Processing and Carrying Capacity Test
- The Application of 2nd Derivative in NIR and MIR Micro-Imaging of Two Plastic Materials
- Quality Control in the Process of Drying Forming of Water-Soluble Plastic Film
- Fatigue Strength Analytical Study of Truck-Mounted Concrete Pump
- Research on the Wireless Multi-Point Temperature Acquisition and SD Card Memory System
- Research on Point-by-point Calculation Compensation Algorithm for Scanning Contours of Rapid Prototyping
- The Key Technology in Extrusion Tapping of Internal Thread
- Analysis of Aromatic Volatiles Utilizing a MEMS-Based Gas Chromatography Column
- Effect of B2O3 and CaF2 on Viscosity of Ladle Refining Slag
- Effect of Micro Scale on Prediction of Thermal Residual Stresses in Multilayer Ceramic Capacitors (MLCCs)
- Application of Six Sigma Method in Improving the Quality of the Spiral Bevel Gear
- Method of Spling Weight and Residual Value for Analyzing Bending of Laminated Skew Plates under Complex Stress State