Manufacturing science and technology : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), July 29-31, 2011, Sanya, China /

Saved in:
Bibliographic Details
Meeting name:International Conference on Advanced Engineering Materials and Technology (2011 : Sanya Shi, China)
Imprint:Durnten-Zurich : Trans Tech Publications, Ltd., 2011.
Description:1 online resource
Language:English
Series:Advanced materials research ; v. 295-297
Advanced materials research ; v. 295-297.
Subject:Materials -- Congresses.
TECHNOLOGY & ENGINEERING -- Engineering (General)
TECHNOLOGY & ENGINEERING -- Reference.
Materials.
Electronic books.
Electronic books.
Conference papers and proceedings.
Format: E-Resource Book
URL for this record:http://pi.lib.uchicago.edu/1001/cat/bib/11276089
Hidden Bibliographic Details
ISBN:9783038136248
3038136247
9783037851944
3037851945
Notes:Conference papers.
Includes bibliographical references and indexes.
Online resource; title from pdf information screen (Ebsco, viewed August 1, 2014).
Summary:This work covers the subject areas of materials properties, metal casting processes and equipment, forming and shaping processes and equipment, material removal processes and machines, joining processes and equipment, surface technology, common aspects of manufacturing, manufacturing in a competitive environment and other related topics. This book is sure to give readers new insights into the topics covered. Review from Book News Inc.: This three-volume set offers peer-reviewed papers from a July 2011 conference. Major areas explored are materials properties and processes and equipment for cas.
Other form:Print version: International Conference on Advanced Engineering Materials and Technology (2011 : Sanya, China). Manufacturing science and technology. Durnten-Zurich, Switzerland ; Enfield, NH : Trans Tech Publications, ©2011 9783037851944
Table of Contents:
  • Recovery Methods of Germanium
  • Research on Fault Diagnosis for Rotating Machinery Vibration of Aero-Engine Based on Wavelet Transformation and Probabilistic Neural Network
  • Effect of Oxygen Partial Pressure and Temperature on Liquidus for the CaO-SiO2-FeOx-Al2O3 System
  • On the Tensile Stress and Damage Accumulation during Equal Channel Angular Extrusion
  • Thermodynamic Study on Production of Fe-Si-Mn Alloy from Adjusted Converter Slag
  • Dynamic Performance of the Bearing-Rotor System in the Ultra-High Speed Electric Spindle with a Additional Supporting System Make up of the Permanent Magnetic Bearings
  • Improving Design of Muffler Based on Three-Dimension Numerical Calculation of Fluid and Sound Field
  • Study on Seismic Response Reduction of a Long-Span Cable-Stayed Bridge by Adding Viscous Dampers at the Different Positions
  • The Limitation of Evaluating Thermal Shock Resistance of Al2O3-SiO2 Refractory by Measuring Strength Loss Rate
  • Study of the Multiaxial Fatigue Life Influencing Factors Based on the Critical Plane Approach
  • Simulation of the Temperature Distribution of Gradient Ti-TiB Composites Prepared by Spark Plasma Sintering Process
  • Broadband Tunable Infrared Source and its Harmonic Generation
  • Recycling of Fiber-Metal Laminates
  • A Modified Implicit Iterative Difference Algorithm for Stiff Chemical Kinetic Equations in Complex Combustion System
  • Research of Laser Welding for Hot Rolling Strip Steel
  • Safety Model Comprehensive Judgement Application for Dike Construction Risk Evaluation System Research
  • Dissimilar Laser Welding of Ti-6Al-4V to Ti-6Al-6V-2Sn
  • Na-Bentonite Anti-Seepage's Ecological Technology and Ecological Effects in Urban River Bio-Remediation
  • Comparison of Dry-Film and Zinc-Phosphate Lubricant for Tube Cold Forming
  • Parametric Study on Fatigue Life Design of Shaft with Holes
  • Microstructure and Fracture Behavior of Ceramic Particle Reinforced Composite Bond with the Assistance of Ultrasonic Waves
  • Policy Planning for Environmentally Sustainable Transport in Beijing, China
  • Calculation of Sound Radiation Power at Two Ends of Duct System
  • Effect of Plasma Nitriding on Ultra-High Cycle Fatigue Behaviors of Ti-6Al-4V
  • Synthesis and Characterization of Highly Cross-Link Polysiloxane Based on 2,4,6,8- Tetramethyl-2,4,6,8- Tetravinylcyclotetrasiloxane
  • Force Calculation of Shunqiao Trench-Buried Inverted Siphon Structure
  • Research of Stress and Deformation Distributions in Central Incisors Restored with Different Glass Fiber Post Types
  • CAD/CAM of the SPROCKET and the EFFICIENCY TEST
  • Simulative Analysis for Reinforced Concrete Face Rockfill Dam of Qianqiao Reservoir
  • Blast Pressure Analysis of a Pressure Vessel
  • Stochastic Seepage Field Studies on Main Embankment of Yangtse Rive in Southern Jingzhou Zone of China
  • Research of FWP Process Deformation Compensation Forecasting on the Basis of TS-FNN
  • Optimization Study on FRP Bolt-End Structure Parameters
  • Wireless Monitoring and Scheduling System of Urban Water Supply Network
  • Concurrent Design of the Petroleum Drilling Machine Based on PDM Platform
  • Experiment Study on Influence of Knowledge Acquisition Ability on Product Innovation Quality
  • Research of System of High-Rise Building Steel Structure Construction Based on AHP-Fuzzy Comprehensive Evaluation
  • Reliability Study on Physical Layer of CAN Bus in Engineering Application
  • Study on Antenna Structure Technology for Realizing Passing Zenith Tracing
  • Research on Parametric Design of Dedicated Computer
  • Optimum Design Study of Hydraulic Hatch Cover on Buckling Strength
  • PLC Sequence Control System of Special Drill Machine
  • Based on Pro/E High Speed Milling of Thin-Walled Stents of Research
  • The Monitoring System of the Hoister Based on Virtual Instrument
  • An Accurate Exposure Time Measurement Method of CCD Cameras
  • Finite Element Optimization Design of the Drum of Storage Winch
  • Research on Virtual Design System for Spindle of High-Speed Machining Center
  • Simulation of Kinematic Movement for Invert Arch Floor of Plunge Pool with Numerical Manifold Method
  • An Improved Genetic Algorithm Based on K2(m) Triangulation of Continuous Self-Mapping
  • A Novel CNC Grinding Method for Relief Surface Based on a CAM System
  • Structural Optimization Based on Stochastic Finite Element Analysis and Optimality Criteria Methods
  • Wave-Induced Load Study on a Deck Barge
  • The Impact of Meshing Transmission of Arc Gear by Hobbing Method and Central Distance Error
  • Research on Semi Physical Test System of PCU on Satellite
  • The Virtual Prototyping Design for AKD Rolled Steel Bundling
  • Mechanical System Dynamics Simulation of Crank Linkage Mechanism Based on Pro/E
  • Velocity Measurement Based on Alternate M/T Method and Incremental Optical Encoder
  • Research on Speed Optimization of ESPCP System under Different Conditions Based on Neural Network
  • Design of Experiment, Approximate Model and Optimization of a Muzzle Brake
  • Research and Creation of Printing-Like Effect Digital Jacquard Fabric
  • The SINS Algorithm Simulation Based on GUI
  • Research on Parametric Design of Customized Products Based on Database
  • Discussion on the Modeling Design of New Times Table Lamp
  • The Design of Calibration Software of Sensor Characteristics Based on LabVIEW
  • Design and Research on New Type Fitness Washing Machine
  • Research on Brushless Permanent-Magnet DC Motor of Electric Scooter Based on Ansoft
  • Research on Rapid Detection of Vitamin C with an Optic Sensor
  • Quadruple-Arc Gear Design, Digital Processing and Carrying Capacity Test
  • The Application of 2nd Derivative in NIR and MIR Micro-Imaging of Two Plastic Materials
  • Quality Control in the Process of Drying Forming of Water-Soluble Plastic Film
  • Fatigue Strength Analytical Study of Truck-Mounted Concrete Pump
  • Research on the Wireless Multi-Point Temperature Acquisition and SD Card Memory System
  • Research on Point-by-point Calculation Compensation Algorithm for Scanning Contours of Rapid Prototyping
  • The Key Technology in Extrusion Tapping of Internal Thread
  • Analysis of Aromatic Volatiles Utilizing a MEMS-Based Gas Chromatography Column
  • Effect of B2O3 and CaF2 on Viscosity of Ladle Refining Slag
  • Effect of Micro Scale on Prediction of Thermal Residual Stresses in Multilayer Ceramic Capacitors (MLCCs)
  • Application of Six Sigma Method in Improving the Quality of the Spiral Bevel Gear
  • Method of Spling Weight and Residual Value for Analyzing Bending of Laminated Skew Plates under Complex Stress State
  • Study of the Sealing Characteristic of Polytetrafluoroethylene-Coated O-Ring Applied in Gas-Tight Deep-Sea Water Sampler
  • Self-Assemble Behavior of Amphiphilic Diblock Copolymer of Methoxy Poly (Ethylene Glycol)/Polyester
  • Preparation of Controlled Microporous High Speed Steel and its Composite Self-Lubrication Materials
  • Research on In Situ Anionic Polymerization of PA6/PI Alloy
  • Simplified Method for Considering Dynamic Second-Order Effects of Elastic SDOF System under Earthquakes
  • Volatilization of MgO from Ludwigite in Carbothermal Reduction-Nitridation Process
  • Study on Thermal and Mechanical Properties of Natural Rubber Latex Modified by Trichlorobromomethane
  • Study of Fibre Tourmaline/PVA Nanofibre Prepared by Electrospinning
  • The Application of Multi-Axial Warp Knitted Fabrics in Wind Turbine Blade
  • Research on Diamond Wheel's Specialties during ELID Ulterprecision Grinding of Silicon Nitride
  • Present Situation and Development Perspective of Soft-Contact Electromagnetic Continuous Casting Technology
  • Studies on Multihollow PUA-EMA-St Crosslinked Copolymer Beads: Synthesis and Hollow Structure
  • Synthesis and Characterization of Novel Functional Polymers from Hemicelluloses
  • Production of Size-Selected CuXSn1-X Nanoclusters
  • Synthesis and Properties of a New Diarylethene Bearing n-Hexyl for Holographic Optical Recording
  • Test Research on the Surface Residual Stress of Dimensional Ultrasonic Vibration Grinding for Al2O3/ZrO2(n)
  • Study of Latex Migration Mechanism during Coating Consolidation
  • Study on Volatile Substances of Different Provenances Teak(Tectona Grandis L.f) Wood by TGA
  • Preparation of Magnetic Expanded Graphite by Sol-Gel Method and its Electromagnetic Properties
  • Preparation and Performance of TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite
  • The Effect of Plasma Treatment on the Performance of Poly(lactide-Co-Glycolide) Fiber
  • Study on the Relationship between Tensile Sample Lamination and Inner Quality of Q345 Slabs
  • Study on Efficiency-Reinforcement Design Methods for Elastomeric Hydraulic Reciprocating Sealing
  • Researches on the Properties of Stearate-Carboxymethyl Konjac Glucomannan Ester Prepared by Microwave Method
  • Preparation and Ferroelectromagnetic Characteristics of Bi2SrNdNb2FeO12 Ceramic
  • The Study on Gelatinization Pressure of Starch by Ultra-High Pressure Processing
  • Study on Spheroidization of Tungsten Powders by RF Plasma Processing
  • The Effect of Carbon Nanotubes on the Tribological Behaviors of PEEK Composites
  • Structure and Magnetostrictive Properties of Tb0.2Pr0.8(Fe0.4Co0.6)1.9Bx Alloys
  • Structure Characterization of Mg-Al Spinel Synthesized from Industrial Waste
  • Synthesis of Silver Nanowires and Investigation of their Optical Limiting Properties
  • #945;-Pinene Isomerization Catalyzed by a Nanometer Solid Superacid
  • Thermo-Mechanical Properties and Microstructure of Al2O3-SiC-SiAlON Composites
  • Study on the Durability of Concrete with Mineral Admixtures to Sulfate Attack by Wet-Dry Cycle Method
  • Sol-Gel Combustion Synthesis of Nanocrystalline Cerium (IV) Oxide Powders
  • Study on Microstructure of Quenched Martensite in W6Mo5Cr4V2 Steel
  • Silica Nanowires Decorated with Cryptophane-A for Sensing Methane
  • Study on Fire Resistance Design Parameters of RC Structure
  • Study on Fast-Releasing Calcium Phosphate Cement for Accelerating the Release of Antibiotic
  • Research on Surface Cracks of Thin Slab
  • Study on Seismic Performance of Single Pylon Cable-Stayed Bridge at High Intensity Seismic Region
  • Study on Technique of Induction Cladding Alloy Layer in Steel Tube Outer Wall and Property of Alloy Layer
  • Synthesis, Optoelectronic Properties of a New Photochromic Diarylethene Bearing Benzothienyl and Malononitrile Group
  • Synthesis, Optoelectronic Property and Application in Optical Memory of a Novel Type Diarylethene Based on a Six Unit
  • Sythesis of a Novel Unsymmetrical Photochromic Diarylethene Compound Bearing a Six-Membered Aryl Unit
  • Photochromism and Optical Storage of a Novel Unsymmetrical Diarylethene Based on Pyrazole and Benzofuran
  • Synthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Based on Benzene Ring
  • Photochromism of a New Unsymmetrical Diarylethene Bearing both Thiazole and a Methoxyl Group
  • Synthesis#65292;Properties and Application in Optical Memory of a Novel Photochromic Diarylethene Bearing a Six-Membered Aryl Unit
  • The Influence of Seismic Motion Input Direction and Damping on the Dynamic Analysis of Mega Steel-Frame Structure
  • Study on Laser Welding Technology of Diamond Core Drill Bit
  • Study on Earthquake Response Analysis of Reinforced Concrete Masonry Structure
  • Preparation and Electromagnetic Properties of Poly(o-Toluidine)-BaAl2Fe10O19 Composites
  • Wear and Mechanical Properties of Fe-28Al and Fe-28Al-10Ti Alloys
  • Synthesis and Characterization of Polymethylsiloxane with Pendant Fluorocarbon Side Chains
  • Research on Defect Detection Technology of C/C Composite
  • Robust Adaptive Control for Gun Control System of Tank
  • Synthesis and Light-Emtting Diodes Properties of Two New Fluorene Based Copolymers
  • Water-Based UV-Curable Polyurethane Based on Wheat Straw Lignin Obtained by Ethanol Extraction
  • Production of Nanosilica from Iron Tailing and Characterization
  • Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Maleic Anhydride
  • Study on the Compression Performance of CFRP Confined GFRP Short Column
  • The Configuration and Evolution of Ti-Si-N Island on TiN(001) Surface: Ab Initio Study
  • The Influence of Si Content on the Microstructure of Rapidly Solidified AlMnSi Foil
  • Sintering Process of Mullite- Corundum Insulation Material with Nano Crystals
  • Synergistic Effect between Montmorillonite Intercalated by Melamine and Intumescent Flame Retardant (IFR) on Polypropylene
  • The Oxidation of Co-5Al Alloys in 1 Atm of Pure O2 at 700 and 800 OC
  • Study on Microorganisms' Immobilization by Different Support Materials in the UASB System
  • Preparation of TiO2 -Pillared Montmorillonite as Application to the Control of Blue Green Algae Growth in Eutrophic Water
  • The Enhanced H2S Sensing Behavior of Ag-Doped Porous SnO2 Nanopowders Prepared by Template Method
  • Solvothermal Synthesis of the SnO2 Nanomaterial for Highly Reversible Lithium Storage
  • Optimum Gate Design of the Injection Mold on Plastic Air Intake Manifold of Engine Based on CAE Technique
  • The Non-Combustibility of PTFE Fabric
  • Studies on Diamond Brazing Process (Part one)
  • Research and Development of a New Grouting Material for Blast Furnace
  • Self Adaptive Modeling and Deposited Metal Property of Rapid GMAW Forming
  • Synthesis of VO2(A) Nanostructures by a Hydrothermal Method and their Transition to VO2(M)
  • Synthesis, Characterization and Optical Properties Based on a Novel Re(I) Emitter with Bulky Building Block
  • The Rockburst Experiment Usage of Similar Material and the Mechanism of the Energy Releasing
  • Pultrusion Technology Optimization for Hybrid Fiber Composites Based on DSC and Mechanical Property Testing
  • Synthesis and Characterization of Chitosan Based Ultraviolet Absorber with Groups of Benzophenone
  • Study on Formation and Exfoliation Mechanism of Alloy TP347H's Oxide Scale in Supercritical Boiler
  • The Thermo-Mechanics Coupled Model of Polycrystalline Aggregates Based on Plastic Slip System in Crystals and their Interfaces
  • Structure and Properties of Calcium-Magnesium-Silicate Ceramic Fiber with Nd2O3
  • Study of Construction Management Maturity Model
  • The Finite Element Analysis of Effect Factor about the Shear Behavior of Cold-Formed Steel Composite Wall
  • Ultrafine #945;-Fe2O3 Nanoparticles: Facile Synthesis, Characterization and their Catalytic Activity on Ammonium Perchlorate
  • Synthesis and Crystal Structure of a New 2D Coordination Polymer [Ce(3,4-pydc)2]*H2O(3,4-pydc = pyridine-3,4-dicarboxylate)
  • Shearer Shaft Roundness Error of Signal Processing
  • Sintering Kinetics of Self-Lubricating Ti-48%Al-2%Nb-2%Cr Alloys with Fluoride Lubricants
  • Proportion Design of Concrete with Gravel-Crushed Proto-Machine-Made Sand
  • The Effects of Hydrothermal Time on the Microstructure of Hollow Sphere Boehmite
  • The Influence of Humidity on Burning Perfectibility of Molded Combustible Cartridge Case
  • Study Situation and Key Technology of Mobile Humanoid Robot
  • Study on the Shear Strength Parameters for Municipal Solid Waste with Higher Content of Organic Matter
  • Study on Properties of Collagen/Chitosan Composite at Different Mass Ratios
  • Thermodynamic Calculation of Al-Cu Eutectic Alloy with Microstructure Simulation Using Phase Field Method
  • Research on Combined Lifting Conceptual Design for Large-Scale Ship
  • Research on the Synthesis of Titanium Nitride by Carbothermal Reduction Nitriding with Anatase and Flake Graphite
  • Replacement of Cement with Rice Husk Ash in Concrete
  • Preparation of Glass Ceramic Made from Fly Ash
  • Preparation and Features of Nano-ZrO2 / HA Coating on Surface of Titanium Materials in Dental-Implant
  • Relationship between Microstructures and Mechanical Properties of Ti-6Al-4V Alloy in Centrifugal Casting
  • The Study of Green Evaluation Support System in Manufacturing Process Based on Multi Agent
  • Study of Anode Modification and Bias Voltage Treatment on Organic Solar Cells with Rubrene/ C60 Heterojunctions
  • The Addition of a Nano-SiO2 on the Tribological Properties of PTFE Composite
  • Quick Spherodizing in GCr15 Steel by Mechanism of Divorced Eutectoid
  • Process Characterization of 40Cr Steel Roller by Laser Surface Alloying with Rare Earths Oxide Y2O3
  • Preparation of Pt Colloids via a Wet-Chemical Method for Methanol Sensor
  • Synthesis and Characterization of Nanosized Phpsphor SrS:Eu2+,Sm3+ by a Hydrothermal Process
  • Test Research on Preparation of New Wall Material with Iron Tailings in Tangshan Area
  • Thermally Stable Blue NaBaPO4: Eu2+ Phosphor Synthesized by Combustion Method
  • The Research on Preparation and Application of a Silicon-Based Efficient Coagulant
  • Synthesis and Luminescence Properties of Red Emitting Phosphors Na3CaB5O10:Eu3+
  • Yellow-Orange Upconversion Luminescence in NaYF4:Er3+, Yb3+ Phosphor Synthesized by Microwave Combustion Method
  • Study on Surface Cermets Reinforced by VC Particles Produced in Situ
  • Recycling of Pultrusion Production Waste into Innovative Concrete-Polymer Composite Solutions
  • Study on the Microstructure and Property of Manganese Steel Composites Strengthened by Ceramic
  • Structural Stability and Mechanical Properties of Ni Nanowires under Different Orientation and Size
  • The Relationship between the Biodiversity Conservation and the Traditional Beliefs of the Native People in Dalai Lake Biosphere Reserve
  • Study on Mechanical Property of Al2O3-Based Composite Ceramics Liner of Heavy-Medium Cyclone
  • The Comparison on Morphology and Histology of the Carassius auratus, Pelophylax nigromaculata and Oryctolagus cuniculus Lens
  • Progress of Research on Chitosan
  • Study on Reducing ASR Expansion in Concrete Prepared with Iron Ore Tailings Sand
  • Research on Fatigue Life of the Casting Crane's Girder
  • Study of Ship Propeller Cut and Effecting on Main Engine Running Parameters
  • Synthesis Aligned ZnS Nanocone and its Photoluminescence
  • Surface Photovoltage: an Efficient Tool of Evaluation of Photocatalytical Activity of Materials
  • Simplied Calculation Method for Reinforcement of Rectangular Sectional Flexural Members Considering Crack Width
  • Research of Plasma Clad Al2O3 Coating
  • The Analysis on Causes of Rupture for a Sucker Rod Made of 20CrMo Alloy
  • Study on the Application of the New Rock Drifting Technology in Zhangcun Colliery
  • Study on Control Technology of Transverse Corner Cracks on CC Slab for Automobile Frame Steel Plate
  • The Tensile Properties of Glass Fiber Reinforced ABS Composites Filled with SiO2
  • The Mechanical and Tribological Properties of a Polyurethane Composite Filled with CNT
  • The Staged Construction Plan of Free Way Asphalt Pavement
  • Preparation of Microcrystalline Cellulose from Cotton Linter Ethanol Pulp
  • Study on Rutting Resistance of Polyacrylonitrile Fiber Asphalt Mixture
  • Research on the Load to Ground on Missile Erection and Launching
  • Study on Cu-Based Catalysts for Synthesis of Indole
  • Synthesis and Characterization of Ultrafine Nanocrystalline Ti-Al Nanoparticles
  • The Experiment Study on Making Ultrafine Superfine Nickel Powder by N2H4-KHB Reduction and H2 Reduction
  • The Die Design and Implementation of the Path Trail about Step-by-Step Forming Section
  • Solidification Simulation of Huge Rectangular Ingot by Different Intensive Cooling
  • Study on the Method of Adjustment Skateboard by Dial Indicator to Turning Cone
  • Oxidation Behavior of 2Cr12NiMoWV Steel in High-Temperature and High- Pressure Water Vapor
  • Synthesis and Characterization of LiNi0.4Co0.2Mn0.4O2 Cathode Material via Urea Co-Precipitation Method
  • Study on Practical Calculation Equation of Concrete Strength Criterion under Tension Condition
  • The Random Calculation Model of Chloride Ion Concentration in Concrete
  • The Effect on Heterogeneous Nucleation of Solute Segregation
  • Water Modelling on the Effect of Trapezoidal Nozzle on Vortex during Teeming in Ladle
  • Thermo-Mechanical Behavior of Fiber Reinforced MMC
  • Permeability Test Method of Concrete Member under Uniaxial Tension Stress
  • Static Recrystallization of Magnesium Alloy during TRC-HC Deformation Followed by Annealing
  • Preparation of Cationic Cellulose Obtained from Wood Pulp Using the Microwave
  • The Design of Automatic Test System of High Speed PCM Signals
  • Study on the Preparation of TiN Nano-Particles in a Solidified Low Alloy Steel
  • Properties and Morphology of Damping Composite Consisting of Polyester-Type Polyurethane/Epoxy Resin
  • Research Advance in Harmful Effects and Removal of Impurity Fe from Al and Al Alloys
  • The Study on Pulping and Papermaking Performance of Banana Stem and Leaf
  • The Study on the Bond Strength between Gunning Formed Lining and Surface of Stave with Anchors
  • Research of Mechanical Properties of Ni-Ti-Nb Alloys on Low Temperature and Restriction Behavior
  • Control of Nitrogen Loss during Co-Composting of Banana Stems with Chicken Manure
  • Study of Substrate Induced Deep Level Defects in Bulk GaN Layers Grown by Molecular Beam Epitaxy Using Deep Level Transient Spectroscopy
  • Research on Deformation Error of Links of Parallel Robot
  • Studies on Cutting Forces of High Volume Fraction SiCp/Al Composites with Ultrasonic Vibration High Speed Milling
  • Preparation of Novel Series of UV Dual Curable Polyurethane-Modified Epoxy Monoacrylates and their Films Properties
  • Research on the Extraction of Collagen from Scales of Tilapia
  • Research on New Varying Gear Ratio System
  • The Thermal and Di-Electric Properties of a Silicone-Based Thermal Pad
  • The Controlled Synthesis of Single-Crystalline Cd(OH)2 Nanoparticles with Different Morphologies
  • Study on the Use of Rhodamine Doped Nanocomposite for Latent Fingerprint Detection
  • The Error Model Analysis in Wireless Network Base on the Network Simulator Tool
  • The Study on the Early Age Cracking due to the Addition of Silica Fume into Concrete and the Trouble-Shooting Strategy
  • Study on Cost Modeling Based on Feature Mapping Technology
  • Precise-Micro PECM System and its Applications Combining Synchronizing Ultrasonical Vibration
  • Study on the Preparation of Cu/n-SiO2 Composite Particles by Mechanical Milling
  • Preparation of Graphene/CdS-Nanobelt Nanocomposites
  • Synthesis and Photocatalytic Properties of Fe-Doped TiO2 Nanobelts
  • Modelling of Cyclic Plasticity and Viscoplasticity of Directionally Solified DZ125 Superalloy: Part I: Estimating the Parameters of Chaboche Constitutive Equations
  • Combustion Synthesis and Luminescence Properties of NaY1-XTbX(WO4)2 Novel Green Phosphors
  • Optimization of the Synthesis of Er-Y-Ba-Na Quaternary Fluoride up-Conversion Phosphor and Luminescence Properties
  • Composition and Microstructure of a Natural Nano-Structure Mineral: Six-Ring Rock
  • Evaluation of Permeability of Porous Concrete
  • Interfacial Behaviors in SiC Fiber Reinforced Titanium Matrix Composites during Thermal Exposure
  • Enhanced Infrared Normal Spectral Emissivity of Microstructured Silicon at 100 to 200°C
  • Aluminate Green Phosphor with Small Particle Size Used for PDP via Co-Precipitation Method
  • Investigation of the Corrosion Resistance of Bainitic Steel
  • Effects of Metallic Ions on Photoluminescence Properties of CdSe/PAMAM Nanocomposites and their Application in Fingerprint Detection
  • Energy Conservation Study on Integrated Thermal Insulation Buildings Made of Glazed Hollow Beads Mortar
  • Electrochemical Characterization of Metal Oxynitride Thin Film as New Lithium Storage Materials
  • Cases Analysis of Nonconformity in Ultrasonic Flaw Detection for Steel Plates
  • Fabrication of Superhydrophobic Surfaces on Copper Foil with Stearic Acid
  • Microstructures and Mechanical Properties of Mg-6Al-1Zn-xSn (x=0.5, 1, 2 and 3.5 Wt%) Alloys during Solution Treatment at 420°C
  • Differential Scanning Calorimetry (DSC) Analysis of Abaca Fibre (Musa Textile Nee) Reinforced High Impact Polystyrene (HIPS) Composites
  • Analysis on the Cause of Longitudinal Crack on the Hot-Rolled Ribbed Bar Surface
  • Influence of Temperature on the Absorption Behaviour between Cement and Asphalt Emulsion in CA Mortar
  • Hydration Kinetics of Aluminate Cement Containing Magnesium Aluminate Spinel
  • In Situ Synthesis Process for TiC Whisker Toughening Al2O3-Based Ceramic Cutting Tool Composite
  • Finite Element Analysis of Interfacial Stress of Mg-Baced Composites Reinforced with Short Fiber
  • Experimental Study on the Fundamental Characteristics of Recycled Concrete
  • Microstructure and Properties of High Carbon Equivalent Gray Cast Iron Modified by Rare Earth
  • Influence of MgO on Properties and Microstructure of Mullite Ceramics Synthesized from Coal Fly Ash
  • Effects of Mixed RE on Die-Casting Microstructures and Properties of Commercial Mg Alloy
  • Magnetostriction of Epoxy-Bonded Tb0.22Dy0.48Pr0.3(Fe0.9B0.1)1.93 Composites
  • A Study of Preference Relation for the Mould Bidding Strategy Based on Rough Set
  • Enhancing Electrochromic Property of 1,4­-Di(thiophen­-3­-Yl)benzene by Copolymerization with Pyrene
  • Microstructure Refinement in Non-Quenched and Tempered Vanadium-Nitrogen Steel
  • Influence of Temperature Rise during Finishing Rolling on the Mechanical Properties of T8 Cord Steel
  • Influence of Hydrogen on the Plasmas Nitriding Process of 35CrMo Steel
  • Effect of Yttrium and Magnesium Segregation on Microstructure and Mechanical Properties of Heavy Section Ductile Iron Castings
  • Numerical Simulation of Flowage and Bath Surface Behavior in Continuous Casting Mold with Electromagnetic Brake
  • Novel Optical Fiber Gas Sensing System Based on FBG Filtering
  • A Method for Lamping Atoms into Particles in Particle Dynamic Method
  • Efficient Synthesis, Photochromism and Application of a Photochromic Diarylethene Bearing a Benzene Unit
  • Efficient Synthesis, Photochromism and Holographic Optical Recording of a Photochromic Diarylethene with a Isoxazole Unit
  • Effects of Rare Earth Dopants on Crystal Structures of Bismuth Molybdate Catalysts
  • A Novel Electron Paramagnetic Resonance Phenomenon in a Barium Stronium Titanate Ceramic
  • Control of Nitrogen in Al-Killed Steel by Converter Flow
  • Annealing on the Electrical and Dielectric Properties of Barium Strontium Titanate
  • New Digital Method of Reverse Engineering about Free from Surface
  • Efficient Synthesis and Properties of a Photochromic Diarylethene Bearing Thiophene and Isoxazole Moieties
  • Electro-Generation of 2, 3, 5, 6-TCP in Zn, Ni,P-mSA/mCS Bipolar Membrane Equipped Electrolysis Cell
  • Deflection Test on CFST Arch Bridge with CFRP Slings
  • Model Study about the Influence of Superheat on Macrosegregation Formation in Continuously Cast Bloom of Special Steel
  • Air-Water Interfacial Film of Zirconia and its Heat-Treatment
  • Effects of Milling Time and Annealing Schedule on Mechanical Activation Synthesis of Brownmillerite Structural Ca2Fe2O5
  • Microstructures of In Situ Synthesized ZrB2/AZ91 Magnesium Matrix Composite Synthesized by a New Method of Direct Melt Reaction
  • OH-related Infrared Absorption Spectra in Silicate Glasses
  • Effect of Hole Distance and Hole Number on Bubble Behavior during Gas Injection with Multi-Hole Orifices
  • Experiment on Treating the Dying Wastewater with Blast-Furnace Ash and Fenton Reagent
  • Characterization of Electrochemically Synthesized Pani on Graphite Electrode Use EIS
  • A Novel CuO-TiO2 Composite Photocatalyst and its Degradation of Methyl Orange under UV Irradiation
  • A New Photochromic Diarylethene for Optical Storage
  • Effects of Polypropylene Fiber on Shrinkage of Masonry Cement Mortar
  • Analysis of CTOD Test for Proving Rings of Large-Scale Fully-Welded Ball Valves
  • Numerical Simulation of Interaction between Coal Derrick and Foundation in Freeze - Thaw Process
  • Methods and Equipment of Vacuum and Electromagnetism Suspending Distillation for Fine of Non-Ferrous Metals
  • A Simple Method of Cyclization of the 2'-Hydroxychalcone with Polystyrene-Pyridine Resine under Mild Conditions
  • Morphology and Electrical Properties of Nano-Sized LiFePO4 Cathode Materials
  • Development and Application of Cold-Formed Steel Structure Dwelling System
  • Influence of La and Ce on Microstructure and Properties of Cu-Cr-Zr Alloy
  • Optimization Design of Signal Source Based on FPGA
  • High Overload Penetration Test and Analysis of the Multi-Layer Steel Target
  • Effects of Gadolinium on Aging Behavior and Mechanical Properties of Mg-5Y-3Nd-Zr Alloy
  • Long-Term Performance Research on Reinforced Concreted Beams with Pre-Stressed CFRP Plate
  • Effects of Synthesis-Solvent on Characteristics of Poly(N-Isopropylacrylamide) Hydrogels Synthesized by Frontal Polymerization
  • Development and Design of Coal Gangue Concrete Filling Material
  • Effects of Various Plasticizers on the Moisture Sorption and Mechanical Properties of Gelatin-Chitosan Composite Films
  • Influence of Temperature and Relative Humidity on Perm-Selectivity of PET Packaging Film
  • APCVD Deposition of Si Film on SiO2 Patterned Si (111) Substrates for Solar Cells
  • Bending Properties of Three-Layer Biaxial Weft Knitted Fabric Reinforced Composite Materials
  • Development and Evaluation of a High-Strength and Anti-High Temperature Pre-Crosslinking Gel
  • DSC and TEM Study of Al-Cu-Mg-Ag Alloy Ageing at Low and Elevated Temperature
  • Measuring Methods of Cable Tension in Cable-Stayed Bridges
  • Kinetics of Reductive Dechlorination of DDT in Soil with Zero-Valent Iron
  • Evaluation of Optical Path Designing on 4x4 Cm2 Er3+/Yb3+ Doped Phosphate Glass Waveguide Substrate
  • Load-Carrying Capacity Analysis for Sinusoidal Surfaces Hydrodynamic Bearing
  • Control of Cold Welding Cracks in 30CrMnSi Steel by Welding with Trailing Impacting and Rolling
  • Crystallization Kinetics of ZrCuAlSiY Bulk Metallic Glass
  • Influence of Limestone Powder on Immobilization of Chlorine Ion of Portland Cement
  • Based on CSP Technics, the Experimental Research of Rare Earth Steel Hot-Rolled Deformation Behaviors
  • New Method of Spherical Surface Defect Detection Based on Machine Vision
  • In Situ Template Synthesis Titania Nanotube Array Films on Aluminum Plate
  • Development of Electromagnetic Swirling Flow in Immersion Nozzle in Continuous Casting Process of Steel
  • High Polaried Transmission Effects for Double-Layer Metallic Grating Films on GaN Substrate
  • Effect of Thermomechanical Parameters on the Microstructure and Retained Austenite Characteristics in a Hot-Rolled TRIP Steel
  • Fabrication and Luminescent Properties of Translucent Ce3+:Lu2SiO5 Ceramics by Spark Plasma Sintering
  • Ab Initio Calculation of (001) TiAl3/Al Interface
  • Investigation of Very High Cycle Fatigue Behavior of TC17 Alloy
  • Microstructures and Properties of Laser Cladding Composite Coating of Nano-Y2O3/Co-Based Alloys
  • First-Principles Calculations for Electronic Structures of Flourine-Doped ZnO
  • Influence of the Concentration of La High Doping on Conduction of ZnO
  • A New Approach to Solving Reliability Optimization Design of Gear Box
  • Materials and Fabrication Issues of Micro V-Groove for Optoelectronics Packaging
  • Analysis of the Dry Mortar Produced with Iron Tailings
  • Numerical Simulation of Canned Hot-Extrusion Process of Mo Powder
  • Fabrication of Al/SiC Nanocomposite Powders via In Situ Powder Metallurgy Method
  • Dynamic Analysis of Piezoelectric Smart Structures
  • Optimization of Steel A20402#8242;Parameters under Pulse Electric Field
  • Microstructure, Mechanical and Shielding Properties of Fe67.5Ni23.5B9 Coating / 321 Stainless Steel Laminated Composite by the Air-Plasma Spraying Procedure
  • Effects of Ultrasonic on Ability of Learning and Memory in Kunming Mice
  • A Study on Dynamics of 2-PRR Parallel Machine Tool Based on the Lagrange Equation
  • Effects of Microstructure and Mechanics Performance of Laser Clad with Different Base
  • An Efficient Synthesis of 5-Arylidene Barbiuric and Thiobarbituric Acids Catalyzed by Mg(NTf2)2 in Water
  • Application and Research of Superfine Wood Powder Disintegrator with Multi- Granularity Based on AR Technology
  • Natural Convection Heat Transfer of the PCM Microcapsule Slurry for a Solid Phase State in a Horizontal Rectangular Enclosure
  • Microwave Assisted Synthesis of ZnO Calthrop-Like Nanostructures in Ionic-Liquid
  • Microstructure and Corrosion Resistant Property Research of Super 304H and TP347H Heat-Resistant Steel Welding Joint
  • Dielectric Properties of Carbon-Materials-Filled Composites Characterized by Terahertz Time-Domain Spectroscopy
  • Controlled Fabrication and Properties of Ce0.5Zr0.5O 2 Solid Solutions
  • Effect of Rare Earth Nano-Oxides on Sintering and Crystallization of Fused Quartz Ceramic Materials
  • Effect of Substrates on the Characteristics of Silicon Carbide Deposited from Methyltrichlorosilane
  • Finite Element Analysis on Temperature Field of Laser Brazing
  • Enhanced Photocatalytic Activity of TiO2 by (Tetracarboxyphthalocyaninatio) Cobalt (II)
  • Alloying Element Nickel Influence on Microstructure and Properties of Weathering Steels
  • Analysis on Structural Property and Seismic Performance of the P'ai-Lou Gateways in Xi'an Great Mosque
  • Decolorization of Methylene Blue Dye Wastewater by Fenton's Reagent
  • Electron Transport of Right-Angle Graphene Nanoribbons
  • Coherent Phonon in Single-Walled Carbon Nanotubes by Using a few-Cycle Pulse Laser
  • G12V190 Type Diesel Engine Exhaust Muffler Design Based on Transfer Matrix Method
  • Influence of Ultrasonic Vibration on Preparation for Semi-Solid A356 Alloy
  • Martensitic Transformation in a Low-Alloy Ultra-High-Strength Steel
  • Critical Cooling Rate and Design of Mould Cooling System for Hot Forming of High-Strength Sheet
  • Alloy Design and Practice of High Carbon Alloy Steels with Ultra-Fine Carbide
  • Microwave Hydrothermal Synthesis of ZrSiO4 Nano-Powders
  • Experimental Study on the Seismic Performance of Composite Shear Wall Structure with Thermal-Insulation Wall Form
  • Chemically-Induced Graft Copolymerization of Diethylenetriamine onto Bagasse Celluloses
  • Experimental Study and Finite Element Analysis of the Seismic Behaviors for Steel Fiber Reinforced High-Strength Concrete Frame Exterior Joints
  • Effects of Occupation of the Cages on Thermodynamic Stability of SI CO2 Clathrate Hydrate
  • Influence of Heat Treatment on the Structure and Performance of ATP and its Catalyzer
  • Mechanical Properties and Applications of Carbon Nanotubes
  • Effect on Electroless Nickel Coating on Magnesium Alloy by Nickel Electroless Plating Parameters
  • CuInS2 Thin Films Obtained by Spray Pyrolysis Deposition Using Sodium Dodecyl Sulfate Additive in Precursors Solution
  • Effect of Die-Swell Ratio on Polyacrylonitrile As-Spun Fiber Formation
  • A Theoretic Study on Cam-Clamping Device
  • Effects of Computational Parameters on Solidification Structures Simulated with Phase-Field Method for a Ni-Cu Binary Alloy
  • Infrared Thermographic Diagnosis Mechnism for Fault Detection of Ball Bearing under Dynamic Loading Conditions
  • From Layered Ni(OH)2 Thin Films to Ni(so4)0.3(OH)1.4 Nanobelts through so42- Inserting in Colloid-Based Route
  • A General Sonochemical Approach to Rapid Synthesis of 1D Single-Crystalline MSn(OH)6 (M=Ba, Ca, Sr) Nanostructures
  • The Sonochemical Fabrication for the CaCO3 Nanocrystals with Different Morphologies
  • Design Optimization of the Aerial Lift Boom through the Finite-Element Analysis (FEA)
  • Determination of Ge Fraction and Carrier Concentration in Si1-XGex/Si by Capacitance-Voltage Method
  • Mechanical and Tribological Properties of Nylon 1212 Modified with Brown Corundum Ash and Solid Lubricants
  • A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores
  • Study on the Finite Element Method for Three-Dimensional Static Property of Polyurethane Vibration Isolators
  • Characterization of Ni and Ni-Co Alloy Coatings Prepared by Pulse Current Electroplating
  • Experimental Study of the Packaging Failure for Optical Fiber Arrays
  • The Morphology of SiOx Coated PET Film by Ultrasonic Atomic Force Microscopy and Barrier Properties
  • Springback Simulation in Stretch Bending of Aluminum Extrusions Using Static Implicit and Dynamic Explicit FE Codes
  • Preparation and Characterization of Superhydrophobic Polypropylene Surface with Excellent Self-Cleaning Property
  • Anglicizing Modern High-Rise Building Modeling Design Technique
  • The Effect of Alkaline Slurry on Low-K Film
  • Impact of Process Parameters on the Auto Claw-Pole Thixoforming Process
  • Effect of Floating Die on Tooth Filling of Spur Gear Forging
  • Effect of Mandrel Exchange on the Precision Forging of Spur Gear
  • Surface Characteristic of Wheat Straw Treated with Plasma
  • Formation Mechanism of Linear Explosive Formed Penetrator by Midpoint Initiating Manner
  • Study on Microstructure and Performance of Bead-on-Plate Weld Metal on 21CrMoV5.11 Steel Continuous Casting Roll by Submerged-Arc Overlaying
  • Design and Simulation of Molded Interconnect Devices with Two Shot Molding
  • The Analysis of Tube Spinning Process Parameters on Workpiece Defects
  • Effect of Acid Treatment on Surface Morphology and Strength of Float Glass under Ultrasonic Wave
  • Microstructure and Properties of Laser Cladding Co-Based Alloy Coatings
  • Influence of Inhibition Layer on Adhesion of a Galvanized High Al Dual Phase Steel
  • Synthesis and Character of Amphiphobic Calcium Carbonate Nanoparticles In Situ
  • An Alkaline Hydrothermal Method to Synthesize Super-Hydrophobic Wood
  • In Situ Formation of ZrO2-Y2O3-Containing Ceramic Coating on Magnesium Alloy by Plasma Electrolytic Oxidation
  • Research about the Crackle-Simulated Coating Technology Applied in the Rice-Straw Board Furniture Surface Decorating
  • Formability of AZ31B Magnesium Alloy Sheet in Hydro-Bugling by Pulsating Hydraulic Pressure
  • Effects of the Low Frequency Electromagnetic Field on the Centerline Macrosegregation of 7075 Aluminum Ingots
  • Effect of Different Modified Mechanism on Mechanical and Cutting Properties of WC-Co(Ni)
  • Design and Optimization of Technology and Structure Parameters for Sheet Metal Drawing by Orthogonal Experiment
  • Microstructures and Mechanical Properties of the Mg-5Y- MM Alloys
  • Effects of Asymmetric Bending on Wear of Rolls in a Six-High Cold Rolling Mill
  • Analysis of Forward Spinning for Aluminium Alloy Tube
  • On Formability of MoNiCr Alloy
  • Dynamic Instability of Spatial Structures under Typical Wind Flow
  • Proton Transfer in Proton Exchange Membrane Based on RDF
  • Preparation and Processing of PZT Thin Film by Liquid Mist Microwave Plasma Enhanced Chemical Vapour Deposition
  • A Feasibility Study on Increasing Surface Hardness of Austenitic Stainless Steels by Pack Co-Deposition of N and Cr
  • Management of Bio-Engineering Equipment - Take Ventilation and Mechanical Agitation Fermenter for Example
  • Overload Control of Supersonic Missile System
  • Modeling and Dynamic Simulation of Tracked Vehicle in Vortex
  • A Steering Wheel System and Controller for the Driving Simulator
  • Supersonic Missile Control with PI Sliding Mode Method
  • Analysis of Characteristics of Potential Mud-Rock Flow in Huyu Valley
  • Consider the Effect of the Variation of Underground Water Level to the Superstructure with the Pile Foundation in Different Burying Depth
  • Construction of Customer Knowledge Management Platform Based on TRIZ
  • Micro-Hole Machined by Electrochemical Discharge Machining (ECDM) with High Speed Rotating Cathode
  • Study on Straight Edge Cutter for Processing Circular Arc Tooth Belt Pulley
  • Confined Buckling Analysis of a Viscoelastic Ring Subjected to Constant Temperature Difference
  • Experimental Research on the Screening Efficiency of Particle Impact Drilling Separation System
  • The Study and Realization of Online Submission and Peer Review System Based on AOP
  • An Improved Active Queue Management Algorithm Based on Nonlinear Smoothing
  • To Simulate the Flow Field of Jet Pumps of Plane Model by Using Monte Carlo Method
  • Role of Shear Strain for a General Modeling of Magnetostrictive Film-Substrate System
  • Different Management Goal of the Coal Enterprise Marketing Strategy
  • Decision Model Research of Production Model Based on Fuzzy Theory
  • The Application of Low-Frequency and Low-Power Ultrasound Algae Removal Technology in Pengxi River in Three Gorges Area
  • Research on Diamond Polishing Process Based on Rough Set
  • Optimization of Chlorella pyrenoidosa Removal by Low Frequency Ultrasonic Irradiation Using Response Surface Design
  • Experimental Research on Impact Force and Erosion Effect of Different Hydraulic Pressure
  • Deformation Characteristics Research of Large Span Aqueduct under Impounding Conditions
  • Study on the Brazing Technology and Mechanical Properties Using bmp7 Filler Metal
  • Fatigue Behavior of the Low-Strength Steel Welded Joints Treated by TIG Dressing and Ultrasonic Peening Combined Method
  • The Impact of LPG Storage Tank Steel Specimen Fracture Analysis of Welded Joints
  • Research on the Effect of Ultrasonic Impact Peening on the Fatigue Property of 7075-T651 Aluminum Alloy
  • Welding Thermo Cycle and HAZ Softening of CT80 Butt Weld Joint
  • Numerical Simulation of Welding Residual Stress Considering Phase Transformation Effects
  • Research on Ultra-High Cycle Fatigue Property of 45 Steel
  • Study on Microstructure and Performance of Bonding-FSSW Hybrid Joints of AZ31 Magnesium Alloy
  • Effect of Ar-N2 Mixed Gas on Morphology and Microstructure of Type 316L Stainless Steel TIG Weld Metal
  • Tensile Property for Friction Welded Aluminum Alloy 7075-T6 and 7075-T6
  • Mechanical Property of Friction Stir Welded Retardant Magnesium Alloy Joint
  • Study on DC Double Pulse MIG Welding of Automobile Aluminum Alloy
  • A Study of Temper Bead Technique on A508 Steel Welds
  • Leveraging Heterogeneity Make Resource Location Efficient in Peer-to-Peer Networks
  • Microstructure and Damping Property of the Composite Discontinuous NiTi SMA Thin Films Deposited on PZT Substrate
  • Structural and Optical Properties of Zn1-XCoXO Thin Films Fabricated by Laser Molecular Beam Epitaxy
  • Recent Developments in Microextraction Related Techniques for Trace Environmental Analysis
  • Growth and Field Emission Properties of the Carbon Complex Films
  • Modeling and Simulation Study on the Complex Seepage Mechanism of Porous Electrode for a Proton Exchange Membrane Fuel Cell
  • Fabrication and Photocatalytic Activity of ZnO-TiO2 Nanofibers
  • Researches on the Treatment of the Row Hemp
  • Experimental Study of Heat Pipe Exchanger for High Power LED Cooling System
  • Study on Properties of Bast Fibers
  • The Dispersion of CNT and the Conductive Property of PA6/MWNTs Nanofiber Filaments by Electrospinning
  • Study on the Application of Fringe Curling in Knitwear
  • Effects of Temperature on the Impedance of PEM Fuel Cell
  • Microstructure of CrN-Based Nano Composite Solid Lubrication Films
  • Growth and Application of High Quality ZnO Films Grown on Diamond Substrates
  • Preparation and Study of Strong Magnetoelectric Coupling on Multiferroic BaTiO3/La0.7Sr0.3MnO3 Bilayer Heterostructure
  • Investigations on Properties of PE/PET Bicomponent Spunbonded Nonwovens
  • Ground Movement during Concrete Pipe Piles Jacking in Silt Deposit
  • Establishment of Ink Penetration Model and the Calculation of Penetration Depth inside Paper
  • Effects of the Velocity of Ink Distributing Roller on Ink Tack Value
  • Effect of Thermal Load on Mechanical Properties of Ni/YSZ Anode Support Micro Tubular Solid Oxide Fuel Cell
  • Gray Cluster Analysis on Thermal-Moisture Comfort of Bamboo Fiber Socks
  • Pb(II)-Imprinted Polymer Prepared by Graft Copolymerization of Acrylic Acid onto Cellulose
  • Thickness Dependence of Electrical Properties in Poly(vinylidene Fluoride Trifluoroethylene) Copolymer Thin Films
  • Definition of Cohesive Zone in COREX Melter Gasifier Using Image Processing Method
  • Synthesis of NiCr Nano Oxides as Anode Electrocatalysts for Direct Methanol Fuel Cell
  • Research Progress of Stress Superimposing Method for Residual Stress Determination
  • Strength and Finite Element Analysis of the Boom System of Truck-Mounted Concrete Pump
  • Research Progress and Perspective of Reduction Removal of Phosphorus in Steel Slag
  • Study on the Separation of Waste Polyester-Cotton Fiber with Dilute Acid
  • Cracking Mechanism of RCC Dam Surface and Prevention Method
  • Numerical Simulation of Fracture Process of Three-Point Bending Beam of Concrete Based on Modified Mazars Model
  • Effect of Ultrasonic Vibration on Friction and Wear Properties of GCr15/45# Steel Frictional Pairs under Oil Lubrication
  • Analysis of a New Magnetic Bearing for Magnetic Levitation Stages
  • Numerical Simulation of Temperature Field of Direct Laser Metal Deposition Shaping Process of Titanium Alloys
  • Research on the Dynamic Performance and Mechanical Model of the Single Rod MRD without Accumulator
  • ADAMS MATLAB Co-Simulation of Dynamics Parallel Manipulator
  • Failure Analysis of Drill Collar Box Fracture
  • Study on the Impact of Wind Load on Large Crawler Crane Typical Truss Structure
  • Reliablity Analysis of Large-Span Undergroud Cavern Stability in Jinchuan Mine
  • Effect of White Noise and Dichotomous Noise in a Bistable System
  • Role of Time Delay and Noise Color in Bistable System with Dichotomous Noise
  • A Continuous Fluxless Purification Technique for Mg Scrap Melt
  • Acoustic Property Prediction of an Automobile Air Filter with Acoustical BEM
  • Research on Long-Span Old Bridge's Dynamic Reliability under Vehicular Load
  • Towards Simulation of Fresh Granular-Cement Paste Material Behavior
  • Consistency Assessment Method for Granular- Cement Paste Systems
  • The Research of Angle Measurement between Cone and Support Rods Located at ICF Target
  • Study on the Flutter Model of the Imaging Quality of TDICCD Space Camera
  • Synchronization Analysis of the Double Exciting Motors in Nonlinear Vibration System Based on Reaching Law
  • Identify for Scroll Compressor Noise Using Vibration Signal Based on Neural Network
  • Study of Flotation Deinking Efficiency of Old Newspaper and Old Magazine
  • Numerical Simulation and Analysis of Hydraulic Excitation System Based on Water Hammer by the Method of Characteristics
  • Numerical Simulation and Experimental Analysis of an Active Hydraulic Excitation System Based on Pulsating Flow
  • The Investigation of the Influence of Dynamics Parameters on the Friction-Induced Self-Excited Vibration
  • Effect of Pre-Strain and Roller Working on Torsional Fatigue Properties of a Structural Steel
  • The Research of the Influence of Damping on Automonile Brake Groan
  • Potential Routes for Recycling and Reuse of Silicon Kerf
  • Method to Construct Elementary Dependent Function Based on Weights of Characteristics
  • An Approach to Real Exhibition of the Yarn Texture in the Simulation of the Fabric Appearance
  • AR Bispectrum Characteristics of Block Forming Machine's Vibration Driven by Hydraulic Exciter
  • Numerical Simulation of Double-Deck Metal Cylindrical Tube Crashed under Inside-Explosive Loading
  • Grinding Wheel Carriage Mode Analysis of Vertical Glass Edging Machine
  • The Effects of Rolling and Annealing on the High Speed Impact Deformation Behavior of Mg-3%Li-1%Nd Alloy