Geopolymer and green technology materials : selected, peer reviewed papers from the 2014 Malaysia-Indonesia Geopolymer Symposium (MIGS 2014), May 11-12, 2014, Kuala Lumpur, Malaysia /
Saved in:
| Meeting name: | Malaysia-Indonesia Geopolymer Symposium (2014 : Kuala Lumpur, Malaysia) |
|---|---|
| Imprint: | Pfaffikon, Switzerland : TTP, 2014. ©2014 |
| Description: | 1 online resource (384 pages) : illustrations |
| Language: | English |
| Series: | Materials Science Forum, 1662-9752 ; Volume 803 Materials science forum ; v. 803. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11237138 |
Table of Contents:
- Effects of Lightweight Aggregate Size and Grading on the Residual Strength of Lightweight Geopolymer Concrete Exposed to Elevated Temperature
- Properties of Lightweight Bubbles Aggregate (LBA) for the Replacement of Coarse Aggregates in Concrete
- Utilization of Recycled Glass Waste as Partial Replacement of Fine Aggregate in Concrete Production
- Compressive Strength of Concrete with Recycled Glass as Partial Aggregate Replacement
- Production of Fiber Glass Reinforced Geopolymer Composite Pipe
- Review on Development of Clay Based Geopolymer Ceramic Composites
- Effect of Particle Size on Properties of Sidoarjo Mud-Based Geopolymer
- Mechanical Properties of MIRHA-Fly Ash Geopolymer Concrete
- Epoxy Layered-Silicates Filled with Fly Ash Based Geopolymer: Compressive Properties
- Light Weight Geopolymer Paste Made with Sidoarjo Mud (Lusi)
- Kinetics of Geopolymer Solidification Study Using Texture Analyzer
- Reviews on Clay Geopolymer Ceramic Using Powder Metallurgy Method
- Effect of Alkaline Activators Concentration to the Strength and Morphological Properties of Wastepaper-Based Geopolymer Mortars
- Hybridization Effect of Kaolin and Calcium Carbonate on Tensile and Thermal Properties of Compatibilized Polypropylene Composites
- Properties of Self-Compacting Geopolymer Concrete
- Properties of Geopolymer Concrete from Local Fly Ash (FA) and Palm Oil Fuel Ash (POFA)
- Investigation on the Degree of Reaction and Strength Performance of Fly Ash Based Geopolymer Binder with Alternative Chemical Reagents
- Effect of Solid/Liquid Ratio during Curing Time Fly Ash Based Geopolymer on Mechanical Property
- The Influence of Alkali Activator Concentration to Mechanical Properties of Geopolymer Concrete with Trass as a Filler
- Characterization of Soils as Potential Raw Materials for Soil Stabilization Application Using Geopolymerization Method
- Fundamentals of Geopolymers and Related Alkali Activated Materials
- Lightweight Geopolymer Binder Base on Sidoarjo Mud
- Rheology of High Volume Sidoarjo Mud Mortar
- The Relationship between Water Absorption and Porosity for Geopolymer Paste
- Effect of NaOH Concentration on Microstructure of Boiler Ash Based Geopolymer
- Comparison of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical Properties
- Effect of Sodium Silicate Types on the High Calcium Geopolymer Concrete
- The Effect of NaOH Concentration and Curing Condition to the Strength and Shrinkage Performance of Recycled Geopolymer Concrete
- Physical and Mechanical Properties of Fired Clay Brick Incorporating with Mosaic Sludge Waste
- Study on Quenching and Artificial Ageing on Al-Si Alloy
- The Experimental Determination of the Friction Stress between the Semi-Product and the Active Plate at the Multiaxial Forging of Copper
- Effect of Metakaolin on the Strength and Pore Size Distribution of Concrete
- The Effect of Silicon Nitride Addition on Microstructure and Microhardness of SN100C Solder Alloy Using Powder Metallurgy
- Leachability of Fired Clay Brick Incorporating with Sludge Waste from Mosaic Industry
- Development of Low Cost Sn-0.7Cu Base Composite Solder for High Temperature Application
- Comparison between Thermal Interface Materials Made of Nano Carbon Tube (NCT) with Gad Pad 2500 in Term of Junction Temperature by Using CFD Software, FluentTM
- Thermal Properties of Polypropylene/Palm Kernel Shell Biocomposites: Effects of Amino Silane (APTES)
- Effects of Electro Osmotic Consolidation in South West of Johor: Small Laboratory Scale
- Effect of Polypropylene-Methyl Polyhedral Oligomeric Silsesquioxane Compatibilizer in Polypropylene/Silica Nanocomposites: Mechanical, Morphological and Thermal Studies
- Design of Experiment (DOE) of Powder Metallurgy Technique in Fabricating SnCu/Carbon Lead-Free Composite Solder with Different Mixing Parameters
- Effect of TiO2 Reinforcement on Microstructure and Microhardness of Low-Silver SAC107 Lead-Free Solder Composite Solder
- Comparison of Linear Interpolation Method and Mean Method to Replace the Missing Values in Environmental Data Set
- Effect of Organic Modification on Dynamic Compression Properties of Polypropylene/Muscovite Layered Silicate Composites
- Properties of Concrete with Different Percentange of the Rice Husk Ash (RHA) as Partial Cement Replacement
- An Innovation of the Palm Oil Based Wax as Industrial Wax for Machining Prototype Sustainable Products
- Treatment Method for Dispersion of Carbon Nanotubes: A Review
- Hybrid Microwave-Assisted Rapid Sintering Process for Fabrication of Sn-0.7Cu+1.0wt.%Si3N4 Composite Solder
- Investigation of Epoxidized Natural Rubber (ENR 50) as a Compatibilizer on Cogon Grass Filled Low Density Polyethylene/Soya Spent Flour
- Investigation of Noise Reduction Coefficient of Organic Material as Indoor Noise Reduction Panel
- The Flexural Properties of Reinforced Recycled Glass Concrete Beam
- Testing on Building Material Using Waste Material in Fired Clay Brick
- Simulation of Nano Carbon Tube (NCT) in Thermal Interface Material for Electronic Packaging Application by Using CFD Software
- Effect of Surface Modification on Strain Rate Sensitivity of Polypropylene/Muscovite Layered Silicate Composites
- Tensile Properties of Linear Low Density Polyethylene/Rambutan Peels (Nephelium chryseum Blum.) Flour Blends
- The Effect of Si/Al Ratio and Sodium Silicate on the Mechanical Properties of Fly Ash Based Geopolymer for Coating
- Microstructure Study on Cuprous Oxide Thin Films Deposited on n-Si Substrate via Sol-Gel Spin Coating Technique
- Geopolymer: A Review on Physical Properties of Inorganic Aluminosilicate Coating Materials