Advanced materials and structures V : selected, peer reviewed papers from the Fifth International Conference on Advanced Materials and Structures (AMS 2013), October 24-25, 2013, Timișoara, Romania /
Saved in:
| Meeting name: | International Conference on Advanced Materials and Structures (5th : 2013 : Timişoara, Romania) |
|---|---|
| Imprint: | Pfaffikon, Switzerland ; Enfield, NH : Trans Tech Publications, [2014] ©2014 |
| Description: | 1 online resource (325 pages) : illustrations (some color) |
| Language: | English |
| Series: | Diffusion and defect data. Pt. B, Solid state phemomena ; olume. 216 Diffusion and defect data. Pt. B, Solid state phenomena ; v. 216. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11235562 |
Table of Contents:
- About Replacement of Nickel as Amorphization Element for Fabrication of Ultra-Rapidly Solidified Ti-Zr Alloys
- The Effect of Mo and Al on the Corrosion Behavior of Titanium and Some of its Alloys for Biomedical Applications
- Structural Characteristics of Ductile Iron at Different Rare Earth Contribution from a Magnesium Ferrosilicon Alloy
- Correlation between Microstructure and Magnetic Properties on MnZn Ferrite with Bi2O3 Increasing Addition
- Composite Powder and Compacts of Iron/Iron Oxide Type Produced by Mechanosynthesis and Reactive Sintering
- Crystallization of Ni-Cr-Si-B and Ni-Cr-Fe-Si-B Amorphous Alloys
- Implant Surface Finishing Influence on Tissue-Implant Anchoring
- Mechanical Behavior of Fe60Co14Ga2P10B5Si3Al3C3 Bulk Metallic Glass
- The Influence of Sulphur and Oxigen Additions in Mg-Treated Iron on the Cooling Curves Parameters
- Research on the Influence of Pelleting Mixture Components on Chemical Components and Pellets Structure
- Joint Quality Assessment of Three Different Laser Welded Dental Alloys
- Description of Degradation Process of Rubberized Lean Concrete
- Influence of Cooling Rate on the Structural Characteristics of Ca and Rare Earth Inoculated, Low-S Grey Cast Iron
- Influence of the Si-Content on the High Temperature Oxidation Behaviour of NiCrBSi-Coatings
- A Study on Metal-Ceramic Thermal Expansion Compatibility
- An Evaluation of Sn-Cu-Ga and Sn-Cu-Ag Solder Alloys for Applications within the Electronics Industry
- Analysis of Hazards Identified within the Premises of the Electric Steelworks, to Carry out the Risk Assessment
- Computation of HAZ Hardness for Low Alloyed Welded Steels Using Five-Parameter Logistic Function
- Damage Detection in Flux Cored Wire Welded Structures by Using Vibration Testing
- Determination of Flexural Properties of Rigid PUR Foams Using Digital Image Correlation
- Effects of Silicon Carbide Proportion and Artificial Aging Parameters on Microstructure and Hardness of Al-Cu/SiCp Composites
- Experimental and Numerical Investigations of TBC Behaviour after Aging, Subjected to Tension and Bending
- Determination of Mechanical Properties of Chondrocytes in Articular Cartilage Using Atomic Force Microscopy
- Heat Transfer in Composites Subjected to Temperature Variations
- Influence of Milling Time on the Homogeneity of the Al2O3/Ni Composite Powders Obtained by Mechanical Milling
- Measurement of Young's Modulus and Shear Modulus of Some Structures Welded Using Flux Cored Wire by Vibration Tests
- Mechanical Effects of Simulated Pressure and Temperature Conditions on Porcelain Dental Bridges
- Preparation and Characterization of Amorphous Soft Magnetic FeSiB Powders and Spark Plasma Sintered Compacts
- Research about Relation between the Microstructures and Mechanical Properties of Metal Coating Layers
- Research on Microstructure and Properties of the Active Surface of Bimetallic Tools for Plastic Deformation at Hot or Cold
- Sample Preparation and HR-TEM Investigation Techniques of Ti Based, Ga Containing, Amorphous Alloys
- Stainless Steel Brackets: In Vitro Corrosion Behaviour and Mechanical Debonding Test
- Study of Superelastic Behavior of CuAlBe Shape Memory Alloy by Neutron Diffraction
- Nodular Inhomogeneous Graphitization - Determining Factor of Fatigue Failure
- The Synthesis and Characterization of PVA-Ketoprofen Cryogel, Biomaterial with Extended Drug Release Properties for Cartilage Replacement
- The Effect of Laser Shock Processing on Corrosion Resistance of Stainless Steel AISI 316L
- The Influence of the Sintering Temperature on the Wear Testing for Some Steels Samples Obtained by Powder Metallurgy
- Wear Behaviour of New CoCrMoTi Dental Alloys
- Wear Particle Analysis, the Result of Tribological Phenomena of Biomaterials Couplings-Ultra Hight Molecular Weight Polyethylene and Magnesium Aluminosilicate Ceramic
- Fabrication and Test of High-Temperature Ceramic Transformer
- Metallic Biomaterials Processing Technologies in Order to Obtain a New Design for a Hip Prosthesis Femoral Component
- Nanocrystalline/Nanosized Mixed Nickel-Manganese Ferrites Obtained by Mechanical Milling
- Open Cell Al-Si Foams by a Sintering and Dissolution Process
- Optimizing the Parameters of Reactive Sintering for In Situ Fabrication of Al-Al2O3 Composites
- Properties and Microstructure of HVOF Thermally Sprayed Carbide Based Coatings
- Research on Increasing the Nitrogen Removal Efficiency by Changing the Secondary Treatment Parameters
- Researches Regarding the Improvement of the Steel Quality
- Smart Mobile Workstation Used to Transmit Data for Non-Destructive Testing of Pipelines Welded Joints
- Synthesis of the Fe-10%Si Nanocrystalline Powder by Mechanical Alloying
- Welding of AA2124/SiC/25p-T4 by FSW at High Welding Speed and Monitoring the Process by Real-Time Control of Infrared Termography and Energy Consumption
- Aluminium High Speed Drilling - Some Technological Aspects
- Experimental Research on Modern Methods of Welding Pipelines Using Base Materials X60 and X70
- Edge Fillet Laser Welding of AISI 304 Stainless Steel
- An Axiomatic Design View on Part Orientation Schemes
- Influence of the Electric Field Voltage on the Microhardness of the Layers Coated by Thermal Spraying
- Integration of CAD CAM Techniques in the Development of an Injection Mould for Automotive Parts