Frontiers of advanced materials and engineering technology II : selected, peer reviewed papers from the 2014 International Conference on Frontiers of Advanced Materials and Engineering Technology (FAMET 2014), March 28-29, 2014, HongKong /

Saved in:
Bibliographic Details
Meeting name:International Conference on Frontiers of Advanced Materials and Engineering Technology (2014 : Hongkong)
Imprint:Durnten-Zurich : Trans Tech Publications, [2014]
©2014
Description:1 online resource
Language:English
Series:Advanced materials research ; 912-914
Advanced materials research ; v. 912-914.
Subject:Materials science -- Congresses.
TECHNOLOGY & ENGINEERING -- Engineering (General)
TECHNOLOGY & ENGINEERING -- Reference.
TECHNOLOGY & ENGINEERING -- Material Science.
Materials science.
Electronic books.
Electronic books.
Conference papers and proceedings.
Format: E-Resource Book
URL for this record:http://pi.lib.uchicago.edu/1001/cat/bib/11231849
Hidden Bibliographic Details
Other authors / contributors:Sung, Wen-Pei, editor.
Kao, Jimmy C. M. (Jimmy Chih-Ming), 1963- editor.
ISBN:9783038264583
303826458X
303835077X
9783038350774
Notes:Includes bibliographical references at the end of each chapters and indexes.
Print version record.
Summary:Collection of selected, peer reviewed papers from the 2014 International Conference on Frontiers of Advanced Materials and Engineering Technology (FAMET 2014), March 28-29, 2014, Hongkong. The 447 papers are grouped as follows: Chapter 1: Materials Engineering and Science, Chapter 2: Mechanical, Construction, Manufacturing Engineering and Applied Research, Chapter 3: Information Technologies, Control, Monitoring and Data Processing, Chapter 4: Product Design, Management and Environmental Research, Chapter 5: Bio and Medical Research. Keyword: Materials Engineering and Science, Mechanical, Construction, Manufacturing Engineering and Applied Research, Information Technologies, Control, Monitoring and Data Processing, Product Design, Management and Environmental Research, Bio and Medical Research This three-volume set collects selected papers from a March 2014 conference held in Hong Kong, written by researchers, engineers, academicians, and industrial professionals from around the world, especially Asia. The contributors present research results and application experiences in materials science, mechanical design, and manufacturing engineering. Volume one contains sections on materials engineering and science, and mechanical, construction, and manufacturing engineering and applied research. Volume two contains further work on mechanical, construction, and manufacturing engineering and applied research, plus papers on information technologies, control, monitoring, and data processing. Volume three contains additional papers on information technologies, control, monitoring, and data processing, along with papers on product design, management, environmental research, and bio and medical research. Some specific topics treated include green technology, "smart city" construction, architectural parametric design, an aquatic logistics model based on supply chain management, improvement of a headphone speaker production line, the effects of juglone on the migration of human ovarian cancer cells, and the design and implementation of an oilfield heterogeneous data-integration model based on ontology. B & w images are included. -- Engineering-- Materials science.
Other form:Print version: Frontiers of advanced materials and engineering technology ii 303835077X
Table of Contents:
  • Damage Analysis for Multilayer Composite Material
  • Dynamic Properties of NiTi Shape Memory Alloy under Combined Compression-Shear Loading
  • Ultrasonic TOFD in the Application of Thick Wall Tube Welding Seam Detection Pre-Research
  • Effect of Calcination Temperature on the Structure and Electrochemical Performance of LiNi0.4Co0.2Mn0.4O2
  • Effect of High Temperature Stays Process on Ultra-Low-Carbon Bainitic Steel without Nb, Ti and other Metal Compounds Forming Elements
  • Experimental Research and Simulation Analysis on Composite Structure Embedded Optical Fiber Sensor under Impact Load
  • Magnetic Properties of Nano Zerovalent Iron Particles Coated with Biopolymers
  • Acoustic Emission Attenuation and Source Location of Resin Matrix for Wind Turbine Blade Composites
  • Adsorption Kinetics for the Extraction of Cesium(#921;) from Aqueous Solutions on Potassium Zinc Hexacyanoferrate
  • Analysis on the Bonding Property of the Propellant and Liner
  • Application of Low-Strain Dynamic Detection to Concrete Piles
  • Application of Stabilizer to Improvement the Saline Soil in Lor Nur Lacustrine
  • Biological Activity Studies on a Copper(II) Complex with Taurine Schiff Base
  • Characteristics of Magnetic Susceptibility of Rocks from the Iron-Copper Deposit in Dongchuan Region of Yunnan
  • Characteristics of Magnetic Susceptibility of the Cores in Yinmin Mining Area
  • Corrosion Resistance of Ultrafine-Grained Pure Cu
  • Decontamination of HD on the Surface of Military Uniform by Vaporous Hydrogen Peroxide
  • Desilication of Collophanite Ores by Reverse Flotation
  • Determination of Hydrated Lime Content in Asphalt Mastic Incorporating High Temperature Performances
  • Development of Functional Knitted Fabrics Made from Bi-Component Chitin and Wool Fibre
  • Development of High Transparent Polypropylene
  • Dyeing Properties of Gardenia Yellow for Silk Fabrics
  • Dyeing Properties of Warm-Dyeing Reactive Dyes for Viscose/Chitin Blend Fiber
  • Effect of Austenitization Temperature on Formation of Low Temperature Bainite
  • Effect of Ce on Palladium Deposition by Electroless Plating
  • Effect of Chemical Composition and Microstructure on Abrasion Resistance of Surfacing Materials
  • Effect of Porosity on Mechanical Property and Acoustic Emission Signals of Composite Materials
  • Effect of the Temperature on Synthesizing of Hydroxyapatite
  • Effects of 60Co-Irradiation on Gas Permeation Properties of Polyimide Membranes
  • Electromagnetic Wave Absorption Properties of Glass Fiber Reinforced Cement Filled with Carbon Black
  • Experimental Study of Mechanical Properties of Concrete after Freeze-Thaw Exposures
  • Experimental Study on the Influence of Different Cooling Rate to Frost Heave of Silty Clay
  • Fabrication of Micropattern of Plastic Film Using Ultrasonic Micro Embossing
  • Formation of CaCO3 Superstructures in the Presence of Polyvinylpyrrolidone
  • Fuzzy Mathematics Evaluation on the Properties of Warmth Retention Underwear Fabrics
  • Graphical Simulation for Microstructures of Ni-TiN Coatings Using Cellular Automata Model
  • Grinding Aids for Steel Slag and the Application
  • Grouting Material Mix Proportion Test Research of Void the Old Cement Concrete Pavement Slab
  • Hierarchical SAPO-11 Synthesis by Carbon Nanoparticles Templating Method and its Application on n-Dodecane Hydroisomerization
  • Indoor Study on Road Performance of Macromolecule Polymer Bitumen Waterproof and Cohesive Layer (PCMA)
  • Influence of Adding KH2PO4 on WO3/#947;-Al2O3 Solid Acid Catalyst for the Synthesis of Acrylic Acid from Lactic Acid
  • Influence of Aging Process on the Crystalline Structure and Electrochemical Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material
  • Influence of Fiber Type on Road Performance of Stone Mastic Asphalt
  • Influence of Heat Treatment Parameters on Mechanical Properties and Crashworthiness of Aluminum Crash Box
  • Influence of Heat-Treatment on Mechanical Properties and Wear Resistance of Ultra-High Mn Steel
  • Influence of Ni/Cr Substitution for Mn on Crystal Structure and Electrochemical Performance of LiMn2O4 Cathode Materials
  • Influence of Nitridation Time on the Characteristics of GaN Films Deposited on Ni Metal Substrate by ECR-MOCVD
  • Inhibiting Effects of Taurine on Doxorubicin-Induced Oxidative Stress in Rats
  • Mathematical Morphology Applied to the Cross Section of Microscopic Plant Fiber for Characterization of Geometric Parameters: A Case Study of "Rhektophyllum camerunense"
  • Mechanical Properties of High Performance Concrete Subjected to High Temperature as a Function of Fly-Ash and Fiber Addition
  • Microstructural and Electrical Properties of ZnO Ceramics with ZnO-Na2O-P2O5 Glass Oxide Additions
  • Microstructure and Basic Properties of Domestic Butyl Rubber 1751
  • Microstructure of Recycled Gypsum Plaster by SEM
  • Modulus of Elasticity of Schizolobium amazonicum Wood Evaluated by Transversal Vibration Technique
  • Novel Ionic Polymer-Metal Composite Employing Sulfonated Polyimide as Ion-Exchange Membrane
  • Numerical Simulation and Structural Mechanical Analysis of Asphalt Pavement due to Abrupt Temperature Drop
  • PEG-PLGA Nanoparticles Entrapping Doxorubicin Reduced Doxorubicin-Induced Cardiotoxicity in Rats
  • Preparation and Properties of #947;-Rays Irradiation-Induced Crosslinked Sulfonated Polyimide Proton Exchange Membranes
  • Preparation of Hierarchical and Ordered Porous Nanostructured Carbons
  • Preparation of Hollow/Porous Carbon Nanofibers from PAN with High Molecular Weight
  • Preparation of Platinum Catalyst Supported on Porous Carbon Nanofibers
  • Preparation of #946;-Cyclodextrin Coated Fe3O4 Nanoparticles and their Application for Enrichment of Cu(II) from Environmental Water Samples
  • Pretreatment Study on the Deposition of Diamond-Like Carbon Films on Quartz by Star-Shape MPCVD Reactor
  • Refinery Corrosion and Countermeasures of the Cooler
  • Research on Degradation of Flocculating Stemming Contained Polymer and Clay Used for Profile Control
  • Research on Laser Remelting of Plasma Sprayed Ceramic Nanometer Coatings on the Inner Wall of the Cylinder Liner
  • Research on Nanomaterials and its Latest Application
  • Research on the Impacting Factors of Dimensional Accuracy with Silicone Mold Casting Products Based on FDM
  • Research on the Welding Technology Experiment with Zirconium 702
  • Solvothermal Synthesis and Characterization of Hierarchical Calcium Carbonate Spheres
  • Spectrophotometric Method for the Assay of Chlorhexiidine Acetate
  • Structural and Optical Properties of VO2 Film Grown on Sapphire Substrate by Pulsed Laser Deposition
  • Study of the Mechanical Properties of the Composite Scene Rigid Pavement Structure
  • Study on a New Polymer with Better Performance in High Salinity Reservoirs
  • Study on Corrosion Behaviors of Epoxy Aluminum Coating Immersed in 3.5%NaCl Solution
  • Study on Oxygen-Enriched Combustion Application Technology
  • Study on the Interaction between Gadolinium(III) Aminopolycarboxlicacid Complex and Bovine Serum Album by Spectroscopic Methods
  • Surface Modification and Properties Analysis of Shell Powder with Sodium Stearate Surface Modifier
  • Synthesis and Electrochemical Characteristics of Li3V2(PO4)3/C Cathode Materials for Li-Ion Batteries
  • Synthesis, Characterization and Antibacterial Activity of Chitosan/TiO2 Microspheres
  • Technology Strategies of Bending Forming for Part of Large Size and Ultra Thin-Walled
  • Testing of ABS Material Tensile Strength for Fused Deposition Modeling Rapid Prototyping Method
  • The Actoside Content Analysis in Radix Rehmanniae Using Near-Infrared Technology
  • The Analysis of the Teaching Based on the Work Process in the Plastic Molding Process and Mold Design
  • The Calculation Methods of Markstein Numbers and Laminar Burning Velocities for Hydrogen-Air Premixed Mixtures in Constant Volume Combustion Bomb
  • Investigating Solutions for Injection Molding Weld Line Defects
  • The Damping Properties of the Natural Rubber Filled with ZnO
  • The Development and Application on Composite Resin Substituted for Cement Slurry
  • The Effect of Directionally Chilled Microstructure on Hypereutectic High-Chromium White Cast Iron
  • The Effect of Weld Geometry on the Stiffness of I-Core Steel Sandwich Plate
  • The Feasibility Research on the New Material Used in Electrical Fittings
  • The High Temperature Oxidation Behavior of Hot-Dipping Aluminized Steel 0Cr18Ni10Ti
  • The Manufacturing Technology Research of Composite Resin Transfer Molding
  • The Multi-Channel Filter Based on Photonic Crystal with Circular Resonant Cavity
  • Thermal Design and Dynamic Analysis of Metallic Thermal Protection System
  • Three-Dimensional Solid Design in Duplex Mode of Application of the Composite
  • A Study on the Production and Material Characteristics of Modular Unit of Highly Filled Wood-Plastic Composite Member
  • Acoustic Emission on Adhesively Bonded Single-Lap Joints of Composite Laminate during Tensile Test
  • Effect of Nucleating Agent on the Structure and Mechanical Properties of Oriented PET
  • Failure Analysis of Water-Wall Tubes in the High-Pressure Boiler
  • Numerical Computation for Effective Mechanical Properties of Honeycomb Core Structure
  • Research on Tube Sheet Welding Dynamic Simulation and its Stress Characteristics Based on ABAQUS
  • Strain-Dependent Flow Stress Modeling of Hastelloy X Superalloy under Hot Compression
  • Study on Methanol/Biodiesel for Agricultural Diesel Engines Applications
  • The Research of Quantum-Behaved Particle Swarm Optimization in Gear Steel Hardenability Prediction
  • The Application of LIFEHOPE Military Fire Blanket for Energy-Saving of Glass Furnace
  • The Impact of Coal Tar Yield and Properties Research
  • Quality of CFRP Cross-Sections by Cutting at the Situation of Resin Infiltration and their Defects Suppressing
  • The Effect of Component Distribution Variation on Tensile Property of Gradient Interpenetrating Polymer Networks (IPN)
  • Research and Application on Oil-in-Water Emulsion for Selective Water Plugging
  • Study on High Oxidation Rate Refractory Ore of Lanping
  • Study on One Acrylic Ester of Cytosine
  • The Experiment Study on How Medium Gas Affects Seawater Desalination Facility's Performance
  • Controlled Release of Hydrophilic Guest Molecules from Photoresponsive Nucleolipid Vesicles
  • Analysis of Degradation and Performance of SOFC Cathode
  • Experimental Study on Diffusion of Vaporous Hydrogen Peroxide
  • Identify Carbonate Lithology by Fuzzy Mathematics
  • A Deformation Analysis and Compensation Algorithm for Bracket Structure of Automatic Drill-Riveting System
  • A Method to Establish Motion Equations of Self-Propelled, Cable-Controlled Vehicles
  • A Key Processing Technology of Welded Steel Tube for High-Strength Automotive Drive Shaft
  • Advance Control Experiment of Vibration Machine with High Vibration Intensity Based on SCMnbsp;- Dynamics Characteristics and Advanced Control
  • A Design Scheme of Device for Producing Fresh Water
  • A PLC-Based Tension Training System Design
  • A Truck Frame Fatigue Life Forecast Based on Virtual Prototype Technology
  • A Water Heater with Spraying and Heating Function Based on PLC
  • Analysis on Cupping Process of Cartridge Case without Heat Teatment Based on DEFORM-3D
  • Application of AIS in Ship Collision Prevention
  • Assembly Key of Precise Blanking Punching Compound Die
  • Atmospheric Laser Communication Receives a High Rate of Laser Technology
  • Based on the Finite Element Software ANSYS/LS-DYNA Metal Plate Covering Parts Forming Process Simulation and Optimization Research
  • CFD-Based Visualization Research on the Rotation of Hydraulic Slide Valve Spool
  • Characteristic Analysis on Elastohydrodynamic Lubrication of Orthogonal Face-Gear
  • Claw-Pole Closed Forging Process
  • Common Mechanical Problems Diagnosis and Elimination of the Rapier Loom
  • Correlation of Non-Destructive Pavement Test Devices
  • Design of Intelligent Locomotive Based on STC12C5A60S2
  • Design of Swash Plate Axial Piston Pump Flow is Stable
  • Design of the Plate Heat Exchanger
  • Design on Multifunctional Water-Saving Mulch Planter
  • Design on Transmission Accuracy Testing System of Actuator
  • Design Research of Armored Vehicle Maintainability Evaluation System Based on Virtual Prototype
  • Design the Parameter Optimization of Yacht
  • Discussion of the Assembly Techniques of the Precision Die
  • Dynamic Contact Simulation Analysis of Spiral Bevel Gear Based on ANSYS/LS-DYNA
  • Dynamic Modeling Based on Zero Side-Slip Angle of the Gravity Center for Multi-Axis Steering Vehicles
  • Vehicle Driving Axle Half Shaft Fracture Analysis
  • Electromechanical Coupling Vibration of Rolling Mill Excited by Variable Frequency Harmonic
  • Experimental Study on Tension Performance of Anchor Group
  • Failure Research of Vehicle ABS Based on Fuzzy Diagnosis Technology
  • Fault Analysis of Stator Inter-Turn Short Circuit in Doubly Fed Induction Machines
  • Geothermal Energy Saving Air Conditioning System Research
  • Hardware Circuit Design of a Wire Rope Tension Monitoring System for Main Shaft Hoist
  • Harmonic Response Analysis on Motorcycle Frame
  • Hybrid Synchronization of Three Identical Coupled Chaotic Systems Using the Direct Design Method
  • Improved Auto Brake and Avoidance
  • Improvement of Hydraulic System for Billet Continuous Casting Shear
  • Modal Analysis of the Bed Structure of Large Diameter Fresnel Lens Mold Machine Tool
  • Mold Design and Process Experiment of Open Die Cold Extrusion of Spline Shaft
  • Numerical Simulation of Hot Stamping of Front Bumper
  • Pneumatic Manipulator Wrist Structure and PLC Control Design
  • Position Sliding Mode Control of Manipulator Joint Based on Genetic Algorithm
  • Research on Chip Formation Mechanism in Mold Processing of Large Diameter Fresnel Lens
  • Research on Connecting Device of Parent-Subsidiary Wind Sailing Boat
  • Research on Control Program Design of Variable Speed Hydraulic System
  • Research on Hydraulic Components Test System Based on Proportional Control Technology
  • Research on Modeling of Cutting Force on CNC Lathe Based on Orthogonal Experiment
  • Research on the High-Power Directional Acoustic Transducer
  • Research on Transverse Prestress Mechanical Properties Experiment of PC Box Girder
  • Round Head Screw Axis NC Machining Process Analysis
  • Study of Non-Equilibrium Arms Bridge Circuit for Water Plugging of Horizontal Wells in Sandstone Reservoir
  • Study of Non-Smooth Gear Based on MÜLLER Algorithm
  • Study of Stability of Surrounding Rock and Structural Characteristics of Large Long Corridor Surge Chamber
  • Study of the Anchorage Seismic Performance for Beam-Ends Strengthened by Bonded Rebars
  • Study of the Modeling and Simulation for Waste Briquetting Machine Based on the Compression/Pushing Mechanical Hydraulic System
  • Study on Recovery System for Marine Diesel Engine Waste Heat
  • TDV10 Type Vacuum Circuit Breaker Electromagnetic Operating Mechanism Design
  • The Analysis of the Stiffness about the School Bus Based on Hyper Mesh
  • The Application of Modern Sealing Technology in Aircraft
  • The Application of Virtual Prototype Technology about the Analysis and Evaluation in Automobile Braking Performance
  • The Creation of the Mathematical Model of Involute Gear Modeling
  • The Design of the Hawse Pipe and Intelligent Positioning
  • The Geometrical Model of Vertical Shaft Impact Crusher Rotor System
  • The Influence of Power Line Transient Pulse Interference to Airborne Equipment
  • The Microscopic Analysis on the Crankshaft Fracture Surface of the Compressor
  • The Research and Design of a Condensed Electrolysis Environmental Suction Machine Based on Air Multiplier
  • The Research on Based on Secondary Regulation of Swing System of Hydraulic Excavator
  • The Research on the Ashtray Designed with UG NX and Manufactured Basing on Rapid Prototyping Manufacturing
  • The Simulation Study on Drawing and Forming of Automobile Panels Based on CAE
  • The Study of Inner EM Environment in the Helicopter under the Influence of Lightning Strikes
  • The Study on Farm Vehicle Electric Window Controller with Anti-Pinch Function
  • The Study on Medium Filling Scheme of LNG Tank Container Impact Testing Based on ANSYS
  • The Wavelet De-Noising of Vibration Signals for Aircraft Rolling Bearings
  • Turning-Milling Machining Center of Each Axis Movement Principle and the Headstock Structure Analysis
  • Turning-Milling Machining Center Spindle Box of 3D Design
  • Vertical Shaft Impact Crusher Wear and Anti-Wear Measures
  • Welding Stress Numerical Simulation and Analysis of High-Pressure Pipeline
  • Design of a New Beetle's Electric-Control Trunk Device
  • Experimental Research on the Operation of Solar Energy Desalination System
  • Limit Cycle Flutter Analysis of a High-Aspect-Ratio Wing with an External Store
  • Mode Analysis and Study of Sunjiagou Aqueduct
  • Research and Analysis on the Retrofit Design of Caving Coal Hydraulic Support
  • Research on Deep Sea Sonar in Marine Navigation of the Ship Anti Collision
  • Study of Frequency Converter Motor Selection Method of Shafting Test Bed
  • The Design of 25KV High-Frequency High-Voltage Power Supply
  • The Design of Photovoltaic System on a New Catamaran with Solar Power
  • The Study on Peak Throughput of TD-LTE
  • Vehicle to Grid - Status and Issues, a Preliminary Survey
  • A Feedback-Based CPG Control Method for a Single-Legged Hopping Robot
  • Application of Linearly Polarized Light in Automobile Lighting System
  • Brief Analysis of MIMO Channel and Antenna
  • Common Electrical Faults Diagnosis and Elimination of Loom
  • Common Fault Analysis and Repair of Three-Phase Motor
  • Design of Isolation PWM Power Amplifier with Motor Direction Control Signal
  • Design of Multi-Function Keyboard Display Controller Based on FPGA
  • Extrusion Mould General Work Part of the Design and Analysis
  • Grinding Hyperboloid Part by Bending Method
  • Large Deformation Analysis of a Dielectric Elastomer Membrane
  • Matching Research on a Parallel Hybrid Power System
  • Research and Development of Agricultural Machinery Operating Area Measuring System Based on Single Chip Computer
  • Research on Electromagnetic Interference of Wiring Motor Vehicle in Coal Mine Tunnel
  • Research on Intelligent System for Cavity Filter Tuning
  • Simulation Study on State of Charge of Battery for Electric Vehicle
  • Synthesis and Analysis of 4-DOF Parallel Manipulators of Computer Aided Geometry Approach
  • The Research of the Tool Magazine Control System Based on PLC
  • The Research on the Form Error Margin of the Auto Test System Design
  • The Robust NN Control and Fast Vibration Suppression of Space Flexible Manipulator with Unknown Parameters
  • The Structure Design of Parent-Subsidiary Wind Sailing Boat and the Matching Research of Power Plant
  • Two-Wheeled Self-Balancing Robot Systems Using Fuzzy Immune Algorithm
  • Research of Temperature Field in Oil-Immersed Transformer Considering the Oil Speed
  • Application of Finite Element Analysis on Lightweight Design to Coaches
  • Analysis and Design of the Profiled Bar Cantilever Scaffold with the Hoisting Unloading Wire Ropes
  • 3D Printing Technology and the Latest Application in the Aviation Area
  • A Design for Power Supply Monitoring
  • A Class of Uncertain Networked Control Systems with Robust H#8734; Fault-Tolerant
  • A Hybrid PSO-PI Controller for the LEO Satellite Tracking System
  • A Distinct Patch of Road Visual Guidance System - The Design of 2D Stereo Deceleration Zone
  • A Framework of the Software Quality Comprehensive Prediction Based on Defect Knowledge Base and Risk Module
  • A Local CSRBF Interpolation Algorithm Based on Partition Acceleration
  • A Method to Update the Simulink Blocks Automatically
  • A New Algorithm of Image Registration Based on Contour Feature
  • A New Design of P-Code Direct Acquisition Module
  • A Non-Probabilistic Measure of Structural Reliability Based on Convex Model
  • A Parameters Estimating Method for BOC Modulation Signal
  • A Parameters Estimation Method for FH Signal Based on SPWVD
  • A Parametric Design of Teaching Aid in Russian Class Based on Computer Technology
  • A Way of Angel Measurement for Virtual Axis
  • Access Control & Temperature and Humidity Systems Based on Distributed Parallel Processing
  • AIS in the Application of the Navigation System
  • Algorithm for Improving Image Denoising Based on Adaptive Wavelet Transform
  • An Algorithm for Solving Stochastic Chance-Constrained Programming Problem
  • An Analysis of the Middle Voice in Advertising English
  • An Improved QPSK Signal's Algorithm Design and Simulation of its Modulation and Demodulation
  • An Improved Three-Dimensional Medical Image Segmentation Approach
  • An Optimization Algorithm Based on Job Shop Scheduling with Fuzzy Goals
  • Analysis and Research of Data Security Policy Based on Cloud Storage
  • Analysis of Crash Counts Using a Multilevel Zero-Inflated Negative Binomial Model
  • Analysis of Infrared Sensors to Monitor the Flow of Vessels
  • Application of Image Analysis Based on Canny Operator Edge Detection Algorithm in Measuring Railway Out-of-Gauge Goods
  • Based on CIMS Application of Small and Medium-Sized Enterprise Information System Integration
  • Based on Digital Image Forensics Edge Characteristic Morphological Filtering Technology
  • Binary Image Information Hiding Based on Research Gui Review
  • Comparing Robustness of EWMA Dispersion Control Chart for Non-Normal Process
  • Corporate OA System Design
  • Design and Development of English Electronic Dictionary Based on Android Platform
  • Design and Implementation of Oilfield Heterogeneous Data Integration Model Based on Ontology
  • Design and Implementation of Portable Visual Stimulator for BCI
  • Design and Implementation of SMS-Based Universal Legal Knowledge System
  • Design and Implementation of Unified Identity Authentication System Based on LDAP in Digital Campus
  • Design and Realization of Gateway Node for the Smart Home System Based on Internet of Things
  • Design of a High-Speed Image Data Real-Time Storage and Display Circuit
  • Design of Detection System for Eccentric C/O Logging Tool
  • Design of Fire Alarm System in Laboratory
  • Design of IRF2 High Availability Architecture in Data Center Server Cluster
  • Development and Research Status of Marine Radar
  • Dynamic Characteristic Analysis of Lian-Huo Highway Bridges
  • Educational Resources Cloud Platform Based on Hadoop
  • Error Analysis and Research Based on EFPI Sensors
  • Function Projective Synchronization between Three-Cell Quantum-CNN Hyperchaotic System and 6th-Order Cellular Neural Network System with Uncertain Parameters
  • Fuzzy Reliability Analysis of Nonlinear Structural System Based on Stochastic Response Surface Method
  • Image Retrieval Technology Based on Color Similarity Matrix
  • Improved Trigonometric Grey Prediction and Application
  • Innovative Design of the Teaching Aid in Russian Class Based on Computer Technology
  • Large Apparatus and Tele-Monitoring System Based on Embedded System
  • Low-Cost Video Fast Recording and Network Self-Learning Platform
  • Medical Equipment Reservation System Based on Hospital Data Integration Platform
  • Microphone High-Temperature Test System Development Based on PID Control
  • Network Architecture and Functional Development of the Art Teaching Platform
  • New Variable Separation Solutions in (2+1)-Dimensionals: The Boiti-Leon-Manna-Pempinelli Equation
  • Parallel k-Way Partitioning Approach for Large Graphs
  • PMV Index Forecasting Algorithm Based on PSO-SVR
  • Radar Net Anti-Jamming Capacity Evaluation Based on Projection Pursuit Method
  • Real Time Prediction Method of Sensor Output Time Series
  • Redundant Use of Visual Images of Different Domain Information Steganographic Technique
  • Remote Sensing Image Classification Based on Object-Oriented Method and Support Vector Machine: A Case Study in Harbin City
  • Research and Application of Adaptive Assembly Methods
  • Research and Realization of Apron Protection System Based on Internet of Things
  • Research of Data Reliability Technology Based on Erasure Code Redundancy Technology in Cloud Storage
  • Research on Chaotic Orbit in Mandelbrot Set
  • Research on Collision Detection Algorithm Based on Combined Bounding Box
  • Research on Game Optimized Artificial Fish-Swarm Algorithm of Communication Signal Processing
  • Research on Rehabilitation Robots of Motion Control PID
  • Research on the Algorithm for Parallel Computing Based on Lifting Wavelet Transform
  • Research on the Coupling Coefficient of the Wireless Power Transmission System
  • Robust #919;#8734; Fault-Tolerant for a Class of Networked Control System Based on Static Output Feedback
  • Round Descriptor Based on SIFT Operator Copy and Paste Forensics
  • SMS Remote Control System Based on GSM
  • Speech Enhancement Based on Bionic Wavelet Transform and Correlation Denoising
  • Speech Intelligibility Enhancement Using Distortion Control
  • Study on Artificial Neural Networks to Identify Sedimentary Microfacies
  • Study on Integral Minimum Method Aspheric Surface Measuring
  • Study on Integration Model of Heterogeneous Database Based on XML Technology
  • Study on Prediction Model of Dissolved Oxygen about Water Quality Monitoring System Based on BP Neural Network
  • Study on the Control of Fuzzy Sliding Mode Variable Structure of Aerospace Vehicle's Attitude
  • Study on the Dynamic Quantitative Weighing System Based on the Buoyancy Weighing Sensor
  • Summary of the Basic Research of Digital Shipbuilding
  • Technology Strategies of Controlling Machining Deformation for NC Milling of Thin-Walled Frame Component Parts
  • The Analysis of Factors Affecting Android App Download Numbers
  • The Analysis of Factors Affecting Consumer Mobile Shopping
  • The Database Design and Optimization
  • The Design and Implementation of Crop Growing Environment Monitoring System Based on the Internet of Things
  • The Design of DC Speed Control System Based on PWM
  • The Design of the Smart Card Attendance System Database
  • The Design of Theft and Fire Alarm Instrument for Intelligent Building
  • The Detection Method of Black Field Failure and Static Frame Failure in Radio and Television Broadcast
  • The Development of the Wireless Remote Control System for Warm Room Ills's Ozone Control Machine
  • The Overall Design of Frequency Conversion Water Supply Control System Based on PLC
  • The Research and Design of Unattended Intelligent Substation of Safety Monitoring System
  • The Research of Semantic Web Service Composition Framework Based on Ontology
  • The Research of Smart Home Control Systems Based on Voice Activated Technology
  • The Solution for Malfunction of the Leakage Protection System Caused by Mine-Used Converter
  • Two Methods to Test Transducer Array Directivity
  • Under Low SNR Condition Rapidly Varying Doppler Frequency Offset Influence on Carrier Frequency Acquisition and Simulation Analysis
  • Various Applications of BIM Technology
  • Applying Digital Image Correlation Techniques to Measure the Crack Variation of Steel Plate under Tension
  • A Research of the 3Bs Teaching Method in Second Language Acquisition
  • Detection and Application of Hull Weld Quality Based on MATLAB Image Processing
  • Heat Pump Remote Monitoring System Design Based on PLC and Messaging to Communicate with GSM
  • Measuring of Low Frequency Internal Friction in Solids
  • Research on Individual Soldier Radio Surveillance Equipment for Battlefield Situation Awareness
  • Sedimentary Characteristics and Reservoir Potential of Underwater Alluvial Fan
  • Solder Bumps Inspection UsingPrincipal Component Analysis in Active Thermography
  • Seismic Response Analysis of Twin-Tower Building with Enlarged Base
  • Survey and Analysis on Proxy Re-Encryption Schemes
  • Computer Technology and Exploration of a Russian Teaching Aid in Russian Teaching
  • The Application of NC Simulation in NC Automatic Programming
  • Design and Development of Public Affairs Government Management System Based on Internet
  • Design of a Small-Sized High-Speed Data Storage Module Based on FPGA
  • A Product Design Method Based on Design-Element Informatization
  • An Interface-Based Integrated System for Project Risk Management
  • Analysis on Optimization of Dividing Construction Bid-Section Based on Safety Risks
  • Aquatic Logistics Model Based on Supply Chain Management
  • A Plate Stamping Mould Design
  • A Study on the Proposal of the Construction Process for Green Buildings in Korea
  • Analysis and Optimization of Production Line Balance Based on ECRSI
  • Analysis on Regional Difference of Causal Relationship between Energy Consumption Intensity and Economic Growth in Eastern, Central and Western China
  • Balance Analysis and Improvement of Headphone Speaker Production Line
  • Carbon Footprint Assessment Methods of Wood Furniture Based on LCA
  • China Sports Industry Value Chain Management
  • Data Envelopment Analysis to Compare Renewable Energy Efficiency in the Italian Regions
  • Design of Handling Bad Geology in the Yanjiang River Road of Hangzhou City
  • Digital Three-Dimensional Labeling System of Product Design Information Based on MBD
  • Distribution and Accumulation of Energy Resources in Ordos Basin
  • Evaluation and Analysis in Product Evolution Design
  • Experimental Study on the Influence of Temperature and Confined Load on the Creep Characteristics of Geogrid
  • Function Analysis of Mature Products Based-on the Function Unit
  • Geological and Seismic Stratigraphy of Wangfu Sag
  • Impact on its Financial Industry Gathering in Tianjin Economic Growth
  • Improvement of a Boiler Feedwater System Using Six Sigma Analysis
  • Method and Implementation of Lean Thinking Based on the Construction Management Model of Lean
  • Method of Secondary Logging Interpretation of Heterogeneous Reservoirs in the Huan 26 Block, Liaohe Huanxiling Oilfield
  • O&M Management and Control Practices of OPRS System Application
  • Parameter Estimation for Lomax Distribution under Type II Censoring
  • Possibility of Reverse Engineering in Low-Cost Terms
  • Referencing International Experiences to Promote Development of Chinese Small and Micro Enterprises
  • Research of China's Sports Industry Management
  • Research of Processing Deformation Compensation of Flexible Leather Material Based on Knowledge Management
  • Research of Project Construction Cost Forecast Based on the Reliability
  • Research on Construction Reliability Calculation Method of Engineering Project
  • Research on Green Construction Technology Innovation Network Organization Mode of Enterprise Leading
  • Research on Model Calculating Depth of Environmental Vibration Caused by the Ground Rail Traffic Load
  • Research on Operational Effectiveness Evaluation Based on Interval Number and Grey Decision Making
  • Research on Optimization Technology of Facility Layout Based on Improved Differential Evolution Method
  • Research on Persona-Based User Requirement in the Future Exploratory Products Design
  • Research on the Development Model of Recycling-Oriented Agro-Products Processing Industry Cluster in Fujian
  • Research on the Development of Chinese Small and Micro Enterprises Based on Institutional Change
  • Research on the Development of Coal Logistics and its Economic Growth of Shanxi Province
  • Research Run Away Ship Drift Probability Distribution
  • Revelation of Domestic and Overseas "Smart City" Construction Practice to "Smart Quanzhou" Construction
  • Safety Control Strategy Designed by the Visual Guidance System of Urban Underground Space
  • Seismic Response Analysis of Fuyang River Aqueduct
  • Small and Medium Retail Enterprises Common Logistics Model and Management Strategy
  • Study on Green Construction Technology Innovation Network Organization Function
  • Study on Multi-Objective Synergy of Construction Project Based on Reliability Theory
  • Study on Structure Effect and Structure Reconstructing Controlling Disaster Mode of Cavity Group-Surrounding Rock System Catastrophe
  • Study on Tenders Division Optimization of Geological Disaster Prevention Project
  • Study on the Fluctuation Law of the Total Coal Output in China
  • Supply Chain Information Platform Construction
  • Synergetic Design of Shell Structure and Space Art Based on Architectural Parametric Design
  • The Application of ADHDP Forecasting Model-Based Vendor Managed Inventory (VMI)
  • The Application of RFID Electronic Tag in the Apparel Industry Chain
  • The Architectural Space Analysis of SOHO
  • The Case Analysis of Clothing Display Design Based on the Specific Brand
  • The Construction Personnel Safety Risk Analysis and Risk Response of Mechanical and Electrical Installation Project
  • The Discuss of the Development of Residential Industrialization in the New Period
  • The Method to Construct the Pattern of Mixed Cares for the Aged in New Community
  • The Production Management System under Mass Customization
  • The Research and Application of Hydraulic Compound Energy-Saving Hydraulic System
  • The Research of the Suitability of the Product Design and the Plastic Technique
  • The Research on the Design of Modern Tea Gift Packaging
  • The Study on Key Factors Influencing Time Delay of Public Construction Project
  • Unascertained-Information-Based Calculation for the Permissible Input of Total Phosphorus in Poyang Lakes
  • A Study on the Comparison of the Energy and Environmental Pollution Prevention Items in South Korea's Green Building Certification System (GBCS) and thenbsp;U.S. LEED System
  • Analysis of Car Sales Mode in China
  • Innovative Design and Stress Analysis of the Mower
  • Wind Response of Interference Effect with Tall Buildings
  • Analysis on Third-Degree Price Discrimination in Oligopoly Market Based on Static Game Theory
  • Comprehensive Evaluation of Implementation Effect on Later-Period Supportive Policy of Reservoir Resettlement Based on ANFIS
  • Game Analysis on the IUR Cooperation and Profit Realization
  • Investigation and Remedial Approach Development for a TCE Spill Site: A Case Study
  • Prediction Method of Lithium Battery's State of Charge Based on No Trace of Calman Filter
  • Print Ads "Three-Dimensional" Form of Research
  • Research on the Measurements of the Disequilibrium Degree of the Urban Agglomeration Traffic Supply and Demand
  • Research on the Optimization of the Enterprise Logistics Distribution Based on ACO Algorithm
  • Study on the Influence of Demographic Dividend Factors on Dependency Ratio
  • Effect of Juglone on Migration of Human Ovarian Cancer SKOV3 Cells
  • CD147 Promote Proliferation in Prostate Cancer Cell
  • Chilling Injury Symptoms and Enzyme Activity Analysis of Lingwu Long Jujube
  • Effect of Sulfur Dioxide Treatment on the Shelf Life of Red Grape
  • Effectiveness of Vaporous Hydrogen Peroxide for the Decontamination of Bacillus atrophaeus in Confined Space
  • Evaluation of Combined Treatments of Natural Fibers: Kenaf, Abaca and Oil Palm Fibers Using Micromechanical and SEM Methods
  • Experimental Study Oviductus ranae for the Change of #945;-SMA and TGF-#946; in Hepatic Fibrosis Rat Liver
  • Exploration of Integrated Teaching Mode of Pharmaceutical Analysis
  • Indigenous Microbial Active Formula System and Field Application
  • Optimization and Application of Liposome-Mediated Transfection of pEGFP-N1 in FRT Cells
  • Pecan Oil Influences Learning and Memory and NF-#954;B Levels in the Hippocampus of Rats after MWM Test
  • Proliferation Inhibition and Apoptosis Induction of Juglone on Human Cervical Cancer HeLa Cells
  • Protective Effects of the Extract of Juglans mandshurica Maxim on Endothelial Cell Damage
  • Research on Improvement of Sulfate Reduction Capability of Sulfate Reducing Bacteria by Plasma Mutagenesis
  • Study of the Protective Effect of Schizandra chinensis Polysaccharide on Oxidative Damage of Mouse Spermatozoa In Vitro
  • The Application of Translational Medicine in Pharmacological Teaching
  • Changes in the Quality of Soybean during Warehouse Storage
  • An Experimental Study on the Rainfall-Runoff Progress of Wheat under Different Slope Angle
  • Cognitive Behavior Therapy Ameliorates Non-Motor Symptoms in Parkinson's Disease
  • Study on the Shelf Life Quality of Kiwifruit with Different Maturity
  • Quantitative Analysis of Radix Rehmanniae from Genuine Producing Area by Near Infrared Spectroscopy
  • The Study of Stability of Processing Grease Storage Temperature on Soybean
  • Hardness of the Schizolobium amazonicum Wood