Key engineering materials : development and application : selected, peer reviewed papers from the 2014 4th International Conference on Key Engineering Materials (ICKEM 2014), March 22-23, 2014, Bali, Indonesia /
Saved in:
Meeting name: | International Conference on Key Engineering Materials (4th : 2014 : Bali, Indonesia) |
---|---|
Imprint: | Durnten-Zurich, Switzerland : Trans Tech Publications, 2014. Durnten-Zurich, Switzerland ; Enfield, New Hampshire : Distributed worldwide by Trans Tech Publications, [date of distribution not identified] ©2014 |
Description: | 1 online resource (517 pages) : illustrations |
Language: | English |
Series: | Advanced Materials Research, 1662-8985 ; Volume 911 Advanced materials research ; v. 911. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11230097 |
Table of Contents:
- The Influence Analysis of Stiffness on Stringer Layout and Dimension of Full Composite Wing
- Properties of Epoxy/Carbon Black/Graphite Composites for Bipolar Plate in Polymer Electrolyte Membrane Fuel Cell
- The Influence of Alkaline Treatment on Mechanical Properties and Morphology of Rice Husk Fibre Reinforced Polylactic Acid
- Thermal Modulus Evaluation of Arenga pinnata Fibre Reinforced Epoxy Composite: Effect of Moisture Absorption
- Wood Shavel Composites with Friendly Environment Based Binder
- Thermal Insulating Materials for Energy Storage Application
- Surface Treatment of Rubber Toughened Polyester Filled Carbon Black and Kenaf Hybrid Composite
- Preliminary Study of Oil Palm Decanter Cake Natural Polymer Composite (OPDC-NPC)
- Characterization of Nafion/Silica Hybrid Composite Membranes for Redox Flow Battery (RFB) Applications
- Study of Pore Closure Mechanism of Aluminium Composite Processed through Powder Metallurgy Route
- Growth of Porous Alumina Layer and Cerium Sealing of Al7xxx/SiC Composite for Structural Lightweight Alloy Corrosion Resistant Application
- Damage Size Classification of Natural Fibre Reinforced Composites Using Neural Network
- Densification and Corrosion Studies of as-Sintered-Swaged Al Composite Preforms
- Synthesized Hydroxyapatite Powder from Clamshell via Chemical Precipitation Method
- Chemical Properties of Waste Tyre Rubber Granules
- Corrosion Behavior of WC-Co in High Sulphate Content
- Calculating of the Relative Preference of Criteria Affecting Electroless Coating of Alumina Nano Particles on Ni-B by Analytic Hierarchy Process (AHP) Method
- Hydrothermal Synthesis and Photocatalytic Properties of BiPO4/Ag3PO4 Heterostructure for Phenol Decomposition
- Laser Cladding of Wear Resistant Stellite 6 Coating on P22 Steel Substrate with Two Different Energy Inputs
- Effect of TiO2 Nanofillers on Mechanical Properties of PVC/ENR/TiO2 Nanocomposites
- Effects of UV Radiation and pH of Tannic Acid Solution in the Synthesis of Silver Nanoparticles
- Effects of Processing Method and Nanofiller Size on Mechanical Properties of Biomedical Thermoplastic Polyurethane (TPU) Nanocomposites
- Natural Zeolite Incorporated in Zinc Oxide Nanoparticles Doped with Manganese for Degradation of Organic Dye in Water under UV Light Irradiation
- Hydrothermal Synthesis and Characterisation of Cu Doped TiO2 Nanotubes for Photocatalytic Degradation of Methyl Orange
- Synthesis and Fabrication of PVA-Ag-Cu and PANI-Ag-Cu Nanocomposite Thin Film Sensor for Detection of E. coli in Water
- Growth of Cobalt Nanowires under External Magnetic Field
- Evaluation of Matrix and Geometric Strain Hardening of Axial Deformed Sintered Fe-0.75%C Preform
- New Method of Phase Transformations Calculation in Metals with Structural Features of the Initial and New Phases
- Optimization of the Compositions of the High Strength Casting Aluminium Alloys Based on Nickel Eutectic
- Experimental Study of Impact Strength of Al-6063 Alloy Processed by Equal Channel Angular Extrusion
- Some Aspects on Cold Deformation Characteristics of Sintered Fe-0.8%C-1%Si-0.4%Cu Steel Preforms
- Diffusion Bonding of Mg/Cu Alloy with Zn Interlayer Metal
- The Influence of Fe Additives on Silica Brick Microstructure
- Prediction of Flow Stress Anisotropy and Tension Compression Asymmetry of Hot Rolled AZ31B Mg Alloy
- Effect of Barium-to-Strontium on Leakage Current Mechanism of Sol-Gel BaxSr1-xTiO3 Thin Films
- Performance Investigation of Non-Linear Insulator against Surface Tracking on Wind Turbine Blade Surface
- The Effects of Excess Calcium and Aging Media on the Mechanical Properties of Calcium Phosphate Filling Materials
- The Potential of Starch as an Eco-Friendly Binder in Injection Moulding of 316L Stainless Steel for Medical Devices Applications
- Deposition of BaZr0.10Ti0.90O3 Thin Films Doped Strontium by Sol Gel Method
- Induction Hardening of Carbon Steel Material: The Effect of Specimen Diameter
- Optimum Heat Treatment of Extrusion Die Steel
- Modeling and Influence of Machining Parameters on Titanium Aloy
- Evaluation of Thermal Gelation of F-127 in a Non-Aqueous Solvent and its Suitability as a Support Material for Additive Manufacturing
- Basic Study on Creep Properties of Eucalyptus Wood
- Thermal Performance on Unglazed Photovoltaic Thermal Polymer Collector
- The Effects of Temperature on Rheology Properties and Filtrate after Using Lemongrass as Lost Circulation Materials for Oil Based Drilling Mud
- Microstructure Study on Gd-Doped BaTiO3 Sol-Gel Multilayer Thin Films Using AFM for Optoelectronic Applications
- Intrinsic Ferroelectric Coercive Field Calculation for BZT Films Doped by Indium and Lanthanum
- Applying the Recovery Voltage Method (RVM) to Study the Degradation of High Power Transformer Insulation
- Platinum-Incorporating Graphene Counter Electrode for In2O3-Based DSSC with Various Annealing Temperatures
- Defect Distribution and Yield Analysis Technique on Silicon Wafer
- Diamond Microelectrodes for Amperometric Oxygen Sensor
- Materials and Processes in Heat Assisted Magnetic Recording
- Characterization and Composition of Oil Extracted from Bastard Poom Beans (Sterculia foetida L) and its Potential as a Biofuel
- Monitoring of Draft Beer Fermentation Process by Electronic Nose
- Optimization of Mannose Yield from Deproteinated Palm Kernel Cake via Dilute Fumaric Acid Hydrolysis
- Imidazolium-Based Ionic Liquid Dissolution Influence on Crystallinity of Oil Palm Frond, Oil Palm Trunk and Elephant Grass Lignocellulosic Biomass
- Biogrowth of Escherichia coli in Bio-Ionic Media
- Adsorption Capacity of Nickel (II) and Cobalt (II) Ions from Aqueous Solutions by Oil Palm Waste and Sawdust
- Adsorption of Methyl Violet Dye from Aqueous Solutions by Activated Carbon Produced from Tamarind Seeds
- Cocoa Pod Husk and Corn Stalk: Alternative Paper Fibres Study on Chemical Characterization and Morphological Structures
- Biodegradable Polymers as Matrices for Control Drug Delivery
- Modulation of Fibrin Gel Extracellular Matrix Properties by Fibrinogen and Thrombin Concentrations for Angiogenesis Assay
- Electrokinetics-Based Microfluidic Technology for the Rapid Separation and Concentration of Bacteria/Cells/Biomolecules
- Preparation and Characterization of Flexible Polyurethane Foams from Palm Oil-Based Polyol
- The Effect of Backbone Disorder on Electrical Conductivity of Poly(dG)-Poly(dC) DNA Molecule at Room Temperature
- A Study on the Hard Wearing UV Treated Photopolymer Printing Plate for Articular Replacement/Arthroplasty (Biomedical)
- Rheological Properties of Hydroxyapatite Synthesized Clamshell Mix with Palm Stearin Binder System
- Ignition by Thermal Radiation of Polyethylene and Human Feces Combustible Wastes: Time and Temperature to Ignition
- Discharge Assessment by Using Integrated Hydrologic Model for Environmental Technology Development
- A Radical Rethink on Soot Containment from Auto-Rickshaw Exhausts
- Potential Utilization of Catalyst for the Combustion of Wood in Households
- The Study of Soil Physical and Chemical Properties in Plant Genetic Protection Area of RSPG, Nampung Dam EGAT, Thailand
- Physical Contaminants Removal from Continuous Process of Water Filtration by a New Low-Cost Palm Shell Charcoal
- Rutting Evaluation of Aged Binder Containing Waste Engine Oil
- Development of Ca(OH)2 Nanosorbent for Intermediate-High Temperature CO2 Capture via Wet Chemical Route in N,N-Dimethylformamide Solvent
- Novel Aragonite CaCO3 Adsorbents: Synthesis, Characterization and CO2 Adsorption
- Enhanced Thermal Stability and Flame Retardancy of a Novel Transparent Poly(Methyl Methacrylate)-Based Copolymer
- Influence of Blast Furnace Slag Content on High Performance Concrete Behavior
- Effect of Coarse Aggregate Sizes on Properties of Porous Concrete Paving Blocks
- Deflection Behaviour of Irregular-Shaped Polyethylene Terephthalate Fibre Reinforced Concrete Beam
- Air Void Characterisation in Porous Asphalt Using X-Ray Computed Tomography
- Investigations of Rubber Dipping by-Product on Bitumen Properties
- Porous Concrete Pavement Containing Nano-Silica: Pre-Review
- Fatigue Life Prediction of Austenitic Type 316L Stainless Steel Using ABAQUS
- Mechanical Properties of Double Layer Rubberized Concrete Paving Blocks
- Information Base for the Optimal Choice of Retaining Structures
- Cracking Propagation of Reinforced Concrete Using Polyethylene Terephtalate (PET) Bottles as Fine Aggregate
- Optimized Cost of High Performance Concrete in the Build
- Properties Comparisons and Cost Analysis of Asphaltic Cement Grade 80/100 and 60/70 Modified with Crumb Rubber and SBS Polymer
- Compressive and Flexural Strength of Foamed Concrete Containing Polyolefin Fibers
- Corrosion of the Pozzolan Concrete in Sulfates
- Failure Prediction of Normally Consolidated Clays Using Stress Paths of Consolidated Undrained Tests
- An Empirical Study on Time Lag Phenomenon Regarding Summertime Indoor Thermal Environments in the Domestic Buildings of Different Construction Types in Hot-Humid Climate Zone