Advanced materials and engineering materials III : selected, peer reviewed papers from the 2013 3rd International Conference on Advanced Materials and Engineering Materials 2013 (ICAMEM 2013), December 14-15, 2013, Singapore /
Saved in:
| Meeting name: | International Conference on Advanced Materials and Engineering Materials (3rd : 2013 : Singapore) |
|---|---|
| Imprint: | Zurich, Switzerland : Trans Tech Publications, [2014] ©2014 |
| Description: | 1 online resource (853 pages) : illustrations |
| Language: | English |
| Series: | Advanced Materials Research, 1662-8985 ; vol. 893 Advanced materials research ; v. 893. |
| Subject: | Materials -- Congresses. TECHNOLOGY & ENGINEERING -- Engineering (General) TECHNOLOGY & ENGINEERING -- Reference. Materials. Electronic books. Electronic books. Conference papers and proceedings. |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11226002 |
Table of Contents:
- Synthesis, Crystal Structure and Antibacterial Activity of 4-Hydroxy-Benzaldehyde Benzoyl Hydrazone
- Study on Scale Inhibition Performance of Modified Polyaspartic Acid
- Artificial Ceramic Metamaterial with Meshed Grid Structure for Radome Application
- Theoretical Study on Adsorption and Doping of Pd Atom on Graphene
- Research on the Adsorption Law of the Titanium Dioxide Photocatalyst to the Dye
- Catalysis Investigation of PET Depolymerization with Brønsted Acidic Ionic Liquid under Microwave Irradiation
- Synthesis of Poly(vinyl alcohol)/Chitosan/Silicon Oxide Beads Untreated and Glutaraldehyde Treated
- Cr, Fe - Doped Anatase TiO2 Photocatalyst: DFT+U Investigation on Band Gap
- First Principle Study of Hydrazine and OH- Co-Adsorption on Ni(111) in High Coverage System
- Morphology-Driven Stark Shift Switching in Ge/Si Type-II Heterointerfaces
- Laser-Induced Copper Deposition from Solution: Removing the Thermodynamic Restrictions
- The Research on Re-Design of Ceramic Products
- Synthesis and Characterization of Hydroxyapatite Powder from Natural Gypsum Rock
- Study on the Electrochemical Performance of High Tap Density LiFePO4/C Synthesized by Spray-Drying
- The Effect of Annealing Heat Treatment on the Microstructure and Macroscopic Properties of Kinetic-Sprayed Ta Coating Layer
- Preparation and Structural Characterization of CaCu3Ti4O12 Doped with Nickel, Ferrite, Manganese and Cobalt
- Thermal Class Evaluation of Glass Net Used for Transformer
- Molecular Dynamics Simulation of Void Structures in Vitreous Silica
- A Geometry Method for Calculating the Fiber Diameter Reduction in Melt Blowing
- A Novel Charged Iridium (III) Complex for Amine Sensor Application
- Effect of Reduction Process Parameter in Direct Reduction Process of Laterite to Produce Substitute Pig Iron for Thin Wall Ductile Iron Material
- A Study on Application of Surfactants in Cemented Carbides Ball Milling
- Novel Approach to Studying Local Electrochemical Processes Inside Cavities
- Application of New Photonic Materials in Development of Psychological Disease Intervention Perspective & Diagnosis
- Application of Green & Environmentally Friendly Materials in Traditional Art Education
- Ultrasonic-Assisted Electroless Plating of Silver Nanoparticles on Carbon Nanotubes
- Disc-Electrospun Nano/Macro-Scale PCL Fibers with Nanoporous Structure
- Synthesis and Characterization of Porous ZnO-CNT Nanocomposites Prepared by Microwave Plasma Jet Chemical Vapor Deposition System
- Preparation and Characterization of Polypropylene/MMT Nanocomposites
- Effect of NaOH Concentration and the Addition of NiCl2 on the Preparation of Ni/NiO/C Composite Nanofibers
- Application of Smart Nanomaterials in Rheumatism Drug Delivery Systems
- Application of Nano Measurement in Development of Breast Cancer Perspective & Diagnosis
- Composite Nanofibers Containing Microparticles Produced via a Stepped Pyramid-Shaped Spinneret
- Influence of Interfacial Exchange Interaction on the Two-Phase Relaxation Time of Superparamagnetic Nanoparticles
- Dependence of the Magnetic State of a Multi-Axis Nanoparticles from the Induced Anisotropy
- Preparation of Al2O3-TiO2 Complex Supports by Nano-Scale Self-Assembly Technique
- Removal of Silver (I) from Aqueous Solutions by Chitosan/Carbon Nanotube Nanocomposite Beads
- The Optimized Assembly Mechanism Research of MorpHology of Hydrothermally Synthesized Nano-Alumina under Neutral Conditions
- Control of the Texture Structure Size in Anisotropic Etching of Silicon
- Mechanism of Memristor with TiO2-x/TiO2/TiO2+x Nano Thin Three Layers
- Optimized Responsivity of Size-Tailored SbBiSe3 Nanowire Photodetectors
- The Plasmonic Nanostructures Applied in the Photovoltaic Cell
- The Analysis of "Super Extension" Behavior and "Self-Cleaning" Mechanism for Anti-Rust Nano-Composite Coating of Reinforcement
- Preparation of PEG Functionalized Nanoparticles for Drug Delivery to Cancer Cells
- Experimental Study on the Uniaxial Compression Curves of Green High-Performance Fiber-Reinforced Cementitious Composites (GHPFRCC)
- Curing Kinetics Analysis and Properties Researches of Cyanate Composites
- Thermal, Mechanical and Dielectric Properties of Silicon Carbide/Polyphenylene Sulfide Composites
- Fundamental Research of Guide Sleeves in 3D Weaving Composites
- Experimental Study on Fire Characteristics of Building External Thermal Insulation Composite Systems Based on Polystyrene Foam
- Effect of Epoxy-Functionalized Acrylonitrile-Butadiene-Styrene on the Morphology and Rheological Properties of Poly(butylene terephthalate)/Poly(acrylonitrile-styrene-acrylate) Blends
- Properties of Thermoplastic Blends with Polypropylene and Collagen Hydrolizate
- Preparation and Properties of Polyimide/MWNTs-COOH Antistatic Composites
- The Effect of the Chopped Fibers on the Damping Characteristics of Fiber Reinforced Polymer Skins of the Polypropylene Honeycomb Sandwich Panel
- Characterisation of Hand-Cast Polysiloxane-Silica Sheet Composite
- Compatibility Effect of Reactive Copolymers on the Morphology, Rheology, and Mechanical Properties of Recycled Poly(ethylene terephthalate)/Polypropylene Blends
- Thermal Conductivity Cyanate Ester Resin Composites Filled with Boron Nitride
- SEM, AFM and LFM Study of the Worn Surface of C/C Composites with Smooth Lamination and Rough Lamination/Resin Carbon Matrixes
- Morphology and Graphitization of the Worn Surface of C/C Composite with Rough Lamination/Smooth Lamination/Resin Carbon as Matrix Precursor
- Evaluation of the Flexural Properties of Pineapple Reinforced Polymer Composite for Automotive and Electrical Applications
- Simulation Studying on Viscoelasticity and Orthotropic of Composite Materials
- The Application of Molecularly Imprinted Polymers to Solid-Phase Extraction
- Synthesis and Dispersing Performance of Hyperbranched Dispersant
- Non-Isothermal Crystallization Behavior and Kinetics of Compatibilized #946; Nucleated Polypropylene/Polystyrene Blends
- Effect of Doping Cerium Oxide on Microwave Absorbing Properties of Polyaniline/Al-Alloy Foams Composite Materials
- Synthesis and Characterization of Poly(fluorene) with Charged Iridium(III) Complex
- Research on Application of Fractal Theory for SiO2/UPR Granular Composites
- The Effect of the Die Temperature on the Solidification Behaviour of the Al/SiCp Metal Matrix Composite: A Comparative Study of Experimental and Finite Element Analysis
- Research on the Ignition Performances of the Titanium Composite SCB
- Effects of Milling Techniques and Calcinations Temperature on the Composite Cathode Powder LSCF-SDC Carbonate
- Hybrid Fluorescent-Magnetic Polymeric Particles for Biomedical Applications
- Synthesis and Characterization of an Experimental Light-Curing Dental Resinous Monomer
- Performance Evaluation of Liquid Nitrogen as Coolant in Turning of Al/SiC Metal Matrix Composites (AMMC)
- Surface Characteristics of Indonesian Cortical Bone Screw
- Effect of Strontium on Microstructure and Mechanical Properties of Semi-Solid A356 Al Alloy
- Microstructure and Magnetic Properties of Rapidly Solidified Sm(CobalFe0.11Cu0.10Zrx)7 Alloys
- Evaluation of Mechanical Properties of Friction Stir Welded Al 6351 Aluminium Alloy with Reinforcement Particles in the Weld Region
- Microstructure Evolution of Nickel Aluminum Bronze Alloy during Compression at Elevated Temperatures
- Microstructural Evolution in Aluminum Alloy 7050 during Cooling from Homogenization
- Effect of the Long Natural Aging on the Precipitation Sequence in Al-Mg-Si Alloy
- Determination of Initiation of Dynamic Recrystallization in AISI 4340 Steel
- Effect of Strain to the Microstructure and Texture of AZ31 Magnesium Alloy during Compression Deformation at Room Temperature
- Study on Electrochemical Noise of N80 Steel in NaCl Solution by Wavelet Analysis and Equivalent Circuit Theory
- Corrosion Behavior of Austenitic Stainless Steel in High Sulphate Content
- Mechanical Properties and Microstructures of Al-12Zn-2.4Mg-1.2Cu Alloy Extruded Sheet
- Effect of Tempering Temperature on Mechanical Properties and Microstructures of 800MPa Microalloy Low Carbon Bainitic Steel
- Influences of H2SO4 and NaCl Concentrations on Stress Corrosion Cracking of AISI 304 Stainless Steel
- Influence of Thrice-Induction-Heating and Once-Quenching on Fatigue Strength of SAE52100 Steel
- The Static Recrystallization Behavior of Fe-Mn-Si-Al Series TWIP Steel
- Microstructure and Plastic Deformation Behavior of Modified AA7075-T6 Aluminum Alloy
- Wear and Frictional Behaviour of Metals
- An Evaluation of the Fire Performance of H-Section Made of Ordinary Strength Structural Steels by Differences of Length
- Corrosion Resistance of High-Alloyed Material UNS N08028 in Sodium Chloride Solution
- Effect of VC Addition on Microstructure and Mechanical Properties of Ultrafine Grained WC-Co Alloys
- A Modified Fictive Stress Model for Zr55Al10Ni5Cu30 Bulk Metallic Glass in Supercooled Liquid Region by Introducing a Time Relaxation Factor
- Separation of Trace Heavy Metal Ions from Leaching Liquor of Low-Grade Pyrolusite with Pyrite and H2SO4
- Metallic Layer Reflectance Analysis Using Design of Experiment
- Adhesion of Streptococcus mutans on Different Types of Orthodontic Brackets
- The Application of Starch - Sodium Alginate Composite Coating on Transparent Paper for Food Packaging
- Scanning Electron Microscopic Studies of Carbonized Rice Husk and Apricot Stone
- Significance of PR-1 Proteins in Infected Plants
- Investigation on the Dielectric Properties of Pulverized Oil Palm Frond and Pineapple Leaf Fiber for X-Band Microwave Absorber Application
- Low Temperature and Copper Induce Viable but Nonculturable State of Salmonella typhi in the Bottled Drinking Water
- Biological Effect of Exo-Polysaccharides Produced by Grifola frondosa on Carbon Tetrachloride Induced Liver Injury In Vitro
- Application of Membrane Science to Remove Endocrine Disrupting Compounds (EDCs) and Pharmaceutically Active Compounds (PhACs): A Review
- Design and Manufacturing Bio Composite (Sugarcane Bagasse - Polyvinyl Acetate) Panel that Characterized Thermal Conductivity
- Influences of Different Surface Treatments on Titanium Substrate to HA/TiO2 Bioactive Coatings
- Derivatives of Hydantoin: Synthesis and Antiproliferative Activity on HepG2 Cancer Cell Line
- Structure, Electrical, Optical and Magnetic Properties of Mn-Doped Copper Nitride Thin Films Deposited by Radio Frequency Magnetron Sputtering
- Hydrophilic Silica Thin Film Formed Using Dimethyl Silicone Oil and Ozone
- Comparison of DLC and N-Doped DLC Synthesized by RF-PECVD
- Preparation of Ion Implanted Porous Silica Thin Film
- Effect of Annealing on Conductivity Type of Nanocrystalline ZnO Films Fabricated by RF Magnetron Sputtering
- Study of Interlayer Element Effect on Properties of AlCrTiSiN Thin Film
- High Heat Treatment Analysis on Ba 0.6Sr 0.4TiO3 Thin Films
- Transparent Conducting SnO2:Al Films Prepared on #945;-Al2O3 (0001) by MOCVD
- Transparent Conducting Zinc Stannate Films Prepared on #945;-Al2O3 (0001) by MOCVD
- Deposition Time Variation Analysis on Indium Tin Oxide Film
- The Anode Oxidation Technics and the Characteristics of the Films of ZL101A Al-Si Alloy
- Research on the Influence of Temperature and Humidity to Asphalt Pavement Seedless Detection Technology
- Numerical Simulation of Influence of Aggregate-Mortar Interface on Fracture Toughness of Concrete
- Compressive and Tensile Strength of Two-Stage Concrete
- Study of the Same Curing Condition of Large Volume Concrete Based on Maturity Methods
- Fiber Reinforced Concrete Frame Shaking Table Test
- Influence of Superplasticizer and Water Cement Ratio on Rheological Characteristics of Fresh Self-Compacting Concrete
- Hysteretic Behavior of Damaged Walls Strengthened by Aramid Fiber Sheet and Additional Reinforcement
- Experimental Research on Mechanical Properties of Basalt Fiber Reinforced Reactive Powder Concrete
- Load Bearing Capacity Tests of Mechanical Joining on Timber-Concrete Beam
- Experimental Research on Cutting Temperature of AISI 1045 in High Speed Milling Process
- Effect of Hot Processing Parameters on the Deformation Behavior of Superalloy GH4169
- Monitoring Welding Discontinuities with Fuzzy Control Chart
- Experimental Study on Enhancement of Steel Mechanical Properties by High Pressure Jet Quenching
- The Cutting Residual Stress Included in the Surface Integrity
- Influence of the Intermediate Annealing on Deformation Ability of the Cold Rolled Ring
- Effect on the Grinding Performance by the Different Elements of the Auxiliary Material
- Influence of Minimum Quantity Lubrication on Cutting Force and Tool Wear during Machining of GH4169
- Synthesis of Mesoporous Molecular Sieve MCM-41 and its Adsorption Behavior for Rhodamine B
- Design of the Face Structure of the Grinding-Driller Based on Deform-3D
- Calculation Method for Interference Value in Metal Joining Structure
- Simulation of HDIs Behaviors in the Plasma Arc Cold Hearth Melting Process
- Fabrication of Polymer Micro-Patterns by Transient Thermolithography with Thickness Control
- Numerical Study on Normal Stress Distributions in a Single-Lap Adhesive Joint
- Three-Dimensional Non-Linear FE Analysis of Shear Stress Distributions in Adhesively Bonded Joint
- Analysis of the Sustainable Construction Concept of the Vernacular Materials
- The Mode and Nature Frequency of Pipes Conveying Fluid with Distributed Follower Force on Two-Parameter Foundation
- Reinforced Round Timber Joints under Static and Cyclic Loading
- Multi-Objective Control Method in Structural Displacement Interval Reliability Based on Epsilon Algorithm
- Productivity Analysis of Fractured Well in Tight Oil Reservoir
- Research Status and Development Trend of Steel-Bamboo Composite Structure
- Research on Diagenesis of Volcanic Reservoirs in YS2,3 Well Fields
- Calculation of Electron State's Change around the Corner of Spin Interference Device in the Semiconductor
- Durability and Stability of LSCF Composite Cathode for Intermediate-Low Temperature of Solid Oxide Fuel Cell (IT-LT SOFC): Short Review
- Energy Assessment for China Nuclear Waste Based on Energy Harvesting
- Study on EMI Reduction of DC-DC Buck Converter
- Synthesis and Characterization of a Novel Diphenylamine-Thiophene Compound for Blue Organic Light-Emitting Diodes
- The Research and Application Based on Removable High-Precision DC Weak Current Sensor
- Evaluation of Performance in Bifacial Solar Cell
- Backward-Wave Property in Left-Handed Materials
- Environmental and Economic Comparative Analysis between Lithium Ion Battery and NiMH Battery of Electric Vehicle
- Output Characteristic Analysis of Partially Shaded Back Surface of Bifacial Photovoltaic Solar Module
- Impact of Spectral Irradiance Distribution and Temperature on Concentrator Photovoltaic System
- Green Performance Assessment of Power Battery for Electric Vehicle Based on Multi-Objective and Multi-Stage
- Research of Epsilon-Negative Material and its Electromagnetic Shielding Effect
- Density Functional Theory Study: Interactions of Lithium-Montmorillonite with Poly(Ethylene Oxide) as Preliminary Investigation of Lithium Polymer Conductivity
- High-Performance Multilevel-Storage Cu-Doped SiOx-Based Nonvolatile Resistance Memory Using Ion Bombardment Technique
- Simulation of Voltage Scaling Aware Mobile Battery Charge Controller Sensor on FPGA
- LED Heat Dissipation Analysis Using Composite Based Cylindrical Slug
- Effects of Heat Slug Shapes on the Heat Dissipation of High Power LED
- High Power LED Heat Dissipation Comparison Analysis via Aluminum and Copper Slug
- Study on Duel Photo-Curing Properties of Quaternary Ammonium Salt Ionic Liquid as Photobase Generator
- Study on the Properties of W-Al2O3 Solar Energy Selective Absorbing Coating Prepared by Magnetron Sputtering
- Study on the Microstructure of Solar Selective Absorbing Coating Prepared by Magnetron Sputtering
- Effects of Different Granularity Control Methods on Morphology, Structure and Electrochemical Performance of LiFePO4/C
- Lithium Mobility in Lithium-Montmorillonite/Poly(ethylene oxide) Electrolytes: A Molecular Dynamics Simulation Study