20th Brazilian Conference on Materials Science and Engineering : selected, peer reviewed papers from the 20th Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 4-8, 2012, Joinville, Santa Catarina /
Saved in:
| Imprint: | Durnten-Zurich : Trans Tech Publicationd Limited, [2014] ©2014 |
|---|---|
| Description: | 1 online resource (760 pages) : illustrations (some color). |
| Language: | English |
| Series: | Materials science forum, 0255-5476 ; volumes 775-776 Materials science forum ; v. 775-776. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11223934 |
Table of Contents:
- Polyurethane Composite Membranes
- Analysis of Bone Repair Tissue after Implantation of Biomaterials and Application of Vibratory Waves
- Development of Titanium Dental Implants Using Techniques of Powder Metallurgy
- Nanostructured Titanium Surface Obtained by Electrochemical Treatment
- Mechanical and Morphological Behavior of Blends Obtained from Biopolymers (PLA/PLC)
- Obtention and Characterization of Collagen and Chitosan Based Cements for Bone Regerneration. Part 1: Extraction and Characterization of Collagen
- Development of Phosphate Glass Microspheres Containing Holmium for Selective Internal Radiotherapy
- Characterization and Study of the Moisture Expansion of Ceramic Blocks from Ceramic Masses Incorporated with Kaolin and Granite Wastes
- Thermal Activation of Palygorskite at Different Temperatures
- Physical and Microstructural Characterization of Cathode, Composite Cathode and Electrolyte Ceramics to ITSOFC
- Application of Clays in Composition of Asphaltic Masses
- Characterization of Asphalt Mix Formulated from Equations of Packing
- Properties of High Temperature Sintered Clay Ceramic Added with Multi-Wire Sawn Granite Waste
- Study of the Rheological Properties of PP/Clay Systems under Steady and Oscillatory Shear Flows
- Weibull Analysis to Characterize the Diameter Dependence of Tensile Strength in Sugarcane Bagasse Fibers
- Chacterization of Tensile Strength Dependence with Diameter of Sponge Gourd Fibers by Weibull Statistical Analysis
- Effect of the Addition of TiO2 Nanoparticles on the Sinterability of a Glass Belonging to the LZSA Glass-Ceramic System
- Preparation and Characterization of A Composite Obtained through Ti (IV) and Phosphoric Acid
- Characterization of Epoxy Matrix Composites Incorporated with Sugarcane Bagasse Fibers
- Obtaining of Polyamide 6/Calcined Nickel Ferrite Composite from Different Temperatures
- Study of Heat Treatment on Phase Transformation of Ni-44,8 wt% Ti Ribbons Obtained by Melting Spinning
- Morphological Characterization of Al-2.0wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring for Thixoforming Process
- Investigation of Microstructural Changes after Solution Annealing Treatment in a Duplex Stainless Steel
- Study of the Tempering Effect in Phase Transformations of 13Cr1Ni0.15C and 13Cr2Ni0.1C Steels
- Characterization of a AISI/SAE 4340 Steel in Different Microstructural Conditions
- Microstructural Characterization of CP Steel Used in Automotive Industry
- Microstructural Characterization of Dual and Multiphase Steels Applied to Automotive Industry
- Heat Treatment as an Alternative to Brass Warping
- Structure and Properties of Quenched and Cyclic Compressed Ti-Mo Alloys
- Evaluation of the Thermal and Kinetic Behavior of the SS Obtained from the Combined Treatment of Liquid Leachate with Domestic Sewage in UASB Reactor
- Spectroscopic and Diffractional Characteristics of Membranes and Polyamide 6/Regional Bentonite Clay Nanocomposites
- Influence of the Addition of Polypropylene and Compatibilizer in PA6 Membranes Obtained by Phase Inversion
- Structural and Thermomechanical Evaluation of Bionanocomposites Obtained from Biodegradable Polymers with a Organoclay
- Tensile Strength of Polyester Composites Reinforced with Thinner Buriti Fibers
- Calcination Influence on the Structure and Morphology of Zirconia Synthesized by Combustion Reaction
- Analysis of the Influence of Liquid and of External Coating Material on the Quality of the Radiographic Image of Offshore Pipes Using Computational Modeling
- Eucalyptus Chip Ashes in Cementitious Composites
- Influence of Curing Temperature on Metakaolin-Based Geopolymers
- Evaluation of Vulcanized Elastomeric Composites after Ageing in Biodiesel
- Electrodeposition of Polypyrrole Films on 2024 Aluminum Alloy in Phosphoric Acid Solution
- Preparation of Poly(Lactic Acid)/Bentonite Clay Bio-Nanocomposite
- Technology for Coke Production in Tunnel Kiln from Compacted Coal Powder
- Crystallization Kinetics of Iron Rich Glass-Ceramic Obtained from Waste of Steel Industry
- Characterization of Banana Fibers Functional Groups by Infrared Spectroscopy
- Infra-Red Spectroscopy Analysis of Malva Fibers
- Izod Impact Tests in Polyester Matrix Composites Reinforced with Banana Fibers
- Correlation between the Diameter and the Density of Coir Fiber Using the Weibull Statistic Methodology
- Thermal Characterization of Polyester Composites Reinforced with Ramie Fibers
- Dynamic-Mechanical Behavior of Malva Fiber Reinforced Polyester Matrix Composites
- Tensile Properties of Epoxy Composites Reinforced with Continuous Sisal Fibers
- Charpy Impact Tests in Epoxy Matrix Composites Reinforced with Continuous Sisal Fiber
- Charpy Impact Test of Epoxy Matrix Composites Reinforced with Buriti Fibers
- Dynamic-Mechanical Analysis of Polyester Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) Fiber
- Tensile Strength of Polyester Matrix Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) Fibers
- Bending Mechanical Behavior of Epoxy Matrix Reinforced with Jute Fiber
- Formulation and Characterization of Polypropylene Composites Alkali Treated Bagasse Fiber
- Characterization of Curaua Fibers by Infrared Spectroscopy
- Izod Impact Tests with Polyester Matrix Reinforced with Buriti Fibers
- Fabrication of Artificial Stone from Marble Residue by Resin Transfer Molding
- Production of Synthetic Ornamental Marble as a Marble Waste Added Polyester Composite
- Alternative Coconut Fiber Surface Treatments Methods for the Development of Polymeric Matrix Composites
- Investigation to Obtain Polyols from Residual Frying Oil
- Preparation of Biodegradable Polymer Nanocomposites and Vermiculite Clay by Melt Intercalation Technique
- Effect of Application of the Shot Peening Process in the Corrosion Resistance of the AISI 430 Ferritic Stainless Steel
- Corrosion Resistance of Hybrid Films Applied on TiN Plate: Precursor Solution Acidified with Hydrochloric Acid
- Particle Size Study of Smectite Clays from the City of Pedra Lavrada-PB
- Influence of Speed of Processing in the Mechanical and Thermomechanical Properties of Polyamide 6 / Organoclay Nanocomposite
- Influence of TiO2 Crystalline Structure on Dielectric Resonator Properties from ZnO-Nb2O5-TiO2 Ceramic System for Use in Telecommunications
- The Influence of Calcination Temperature in Ni-Zn Ferrite Doped with Al3+
- Effect of Oxygen Content during Sintering on the Losses of MnZn Ferrites
- Study of Temperature Sintering by Microwave Energy in Ferrites Ni0,5Zn0,5Fe2O4
- Study of the Reproducibility of Ni-Zn Nanoferrite Obtained by Combustion Reaction
- Synthesis, Characterization and Catalytic Performance of Nanoferrites Subjected to the Esterification Reaction
- Evaluation of the Relationship between Crystallographic Texture and Magnetic Properties through the Magnetocrystalline Anisotropy Coefficient
- Stoner-Wohlfarth Model for Nanocrystalline Anisotropic Sm2Co17 Magnets
- Nucleation as Coercivity Mechanism in NdFeB Magnets
- Strontium Titanate Ceramics Obtained by Conventional and Microwave Methods
- Effect of Microwave Power in Obtaining Ferrite Nanopowders Synthesized by Combustion
- Influence of Clay Content in Membrane Morphology of Polymer Polyamide 6.6/Montmorillonite Clay
- Obtaining of Polyamide 6.6 Plane Membrane Application in Oil-Water Separation
- Nanocomposites Obtained by Montmorilonite Clay Additivation in P3 (HB-8%HV)
- Evaluation of Attapulgite Clay Content from Piaui#769; in Sorption Characterization of Water in the Polyester Matrix Composites
- Synthesis and Characterization of Biocompatible Fe3O4 for Use in Cell Hyperthermia
- Microstructural Evolution of a F138 Austenitic Stainless Steel after Deformation by ECAP and HPT
- Morphological Comparison of PEI and PES Nanocomposite Membranes with Bentonite Clay
- Analysis of the Efficiency of Surface Treatment of Bentonite Clay for Application in Polymeric Membranes
- Study of Morphology Membrane of Polymeric Nanocomposites Obtained by Phases Inversion
- La, Sr and Co Based Coatings Obtained on Ferritic Stainless Steel by Dip-Coating Technique
- Platinum-Free Catalysts for Alkaline Polymer Electrolyte Fuel Cells
- Evaluation of the Thermal Stability of Biofuel Obtained from Oil Plant Pyrolysis and Animal Fat
- Processing of Silicas Formed by Slip Casting
- Production of Li2O-ZrO2-SiO2-Al2O3 (LZSA) Glass-Ceramic Foams by Aeration and Polymerization of Suspension
- Microstructure Evolution during Fabrication of Ni-Ti-Nb SMA Wires
- Influence of Quartzite Residues on the Strength of Added Red Clay Ceramics
- Employment of Response Surface Methodology for Optimization of the Portland Cement Mechanical Resistance
- Effect Polymeric Modifier (Biostrength B150), and Organoclay on Properties of Poly(lactic acid) - PLA
- Study on Physical and Mechanical Properties of PHB Biocomposites with Rice Hull Ash
- Alumina Matrix Composites Produced by Water-Based Tape Casting
- Evaluation of Concretes Incorporated with Fluorescent Lamp Glass Waste
- Incorporation of Granite Waste from Diamond Wire Sawing Process into Cement Matrix Concrete
- Evaluation of the Physico-Mechanical Properties of Concretes Containing Pet and Crushed Sand
- Study of Mechanical Behavior of Components of Duplex Steel by Using of X-Ray Diffraction Technique
- Mechanichal Properties of DGEBA/TEPA Modified Epoxy Resin
- Influence of Poly(Vinyl Butyral) on the Dynamic-Mechanical and Mechanical Properties of Polypropylene/Wood Flour Composites
- Physical-Mechanical Behaviour of a LZS Glass-Ceramic
- Recycling of Benefited Blast Furnace Sludge into Red Clay Ceramic
- Analysis of the Properties of Asphaltic Concrete Using Recycled Aggregates of CDW
- Physical-Mechanical Characteristics in Masses for White Ceramics Obtained with Flat Glass Waste
- Reuse of Special Glass Waste Like a Flux in Masses for White Ceramics
- Recycling of Concentration Tailings of Iron Ore for the Production of Concrete Block (Pavers)
- Formulation of Ceramic Glazes by Recycling Waste Glass
- Characterization of a Water Clearing Treatment Residue and Its Application as Clay Ceramic Addition
- Clay Ceramic Incorporated with Granite Waste Obtained from Diamond Multi-Wire Sawing Technology
- Kaolin Residue as an Alternative Binder for Grout Seat and Revetment
- Preparation of Polyamide 6/PE-g-MA/Compound by Recycled Rubber (SBRr) Blends
- Development of Ceramic Refractory Filters from Alternative Mineral Source: Rheological Characterization
- Citrate-Hydrothermal Synthesis and Electrochemical Characterization of La0.6Sr0.4Co0.2Fe0.8O3 for Intermediate Temperature SOFC
- Evaluation of Structural and Morphological Characteristics of the System Ni1-xZnxFe2O4 Obtained by Combustion Reaction
- Combustion Synthesis of the MgAl2O4 Using Glycerin from the Production of Biodiesel
- Effect of Reaction Temperature in the Alumina Preparation by Combustion in a Muffle Furnace
- ZnAl2O4/Chitosan Films and Evaluation of the Influence of ZnAl2O4 Filler on the Films Morphology, Structure and Thermal Properties
- Characterization of a Granite Waste for Clay Ceramic Addition
- Study of Nanoferrites Ni0,5Zn0,5Fe2O4 and Ni0,1Cu0,4Zn0,5Fe2O4 as Catalysts in the Methyl Transesterification of Soybean Oil
- Use of Ash from Coffee Wood into Clayey Ceramic
- Microstructural Analysis of Clay Ceramic Added with Blast Furnace Sludge
- Study of Compatibility between Organoclays and Organic Dispersant Media through Foster Swelling
- Effects of Mould Temperature in Squeeze Casting of Zamak 5
- Thermal Treatment Related Structure and Property Changes in a TiNi Alloy Presenting Shape Memory Effect
- Magnetic Modified Natural Polymers for Biotechnological Application
- Artificial Neural Network Assisted Digital Image Processing to Determine the Hydrophobicity of Polymeric Materials
- Adsorption of the Blue Dye Reactive Remazol RN in Cellulosic Materials
- Porous Ceramic Structures Obtained from Calcium Carbonate as Pore Generating Agent