Advanced engineering and materials : selected, peer reviewed papers from the 2013 International Conference on Mechanical Engineering and Materials (ICMEM 2013), January 27-28, 2013, Sanya, China /
Saved in:
Meeting name: | International Conference on Mechanical Engineering and Materials (2013 : Sanya Shi, China) |
---|---|
Imprint: | Durnten-Zurich, Switzerland : Trans Tech Publications Ltd, [2013] ©2013 |
Description: | 1 online resource (812 pages) : illustrations |
Language: | English |
Series: | Applied mechanics and materials ; volumes 302 Applied mechanics and materials ; v. 302. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11217887 |
Table of Contents:
- Application of Pico-Second Laser on Low-K Wafer Dicing
- PZT Thin Films Deposited by RF Magnetron Sputtering
- Study on Impact Protection Properties of Titanium Alloy Using Modified SHPB
- Mathematical Simulation of Membrane-Absorption for H2S Capture from Nature Gas
- Histomorphometric Analysis: Effects of Simvastatin on Bone Mass, Microarchitecture and Turnover in Normal Rat
- Fabrication of TiO2 Nanotube Arrays in Ethylene Glycol Electrolyte by the Electrochemical Anodization Method
- Investigations of Oxy-Fuel Combustion Characteristics and Oxygen Permeation Process in a Stagnation Flow ITM Reactor
- Fluid to Fluid Modeling for Post Dry Out Using Dimensional Analysis and Energy Scaling
- The Effect of Radiation on Oxy-Fuel Combustion Characteristics in Microchannels
- Analytical Evaluation of Al 6082-T6 Weld Zone Using Randomised Mixing Material Model
- Additional Aging Effect after Carbonation Process of Fly Ash Based Eco-Materials
- Effect of Pulsed Electron Beam Treatment and Hydrogen on Properties of Zirconium Alloy
- Design Optimization of Composite-Insulated Telescopic Aerial Boom
- Effect of Minor V Addition on Al88Y7Fe5 Amorphous Alloys
- Structure and Properties of Zirconium Alloy after Modification by Pulse Ion Beam
- Effect of Sintering Conditions on the Bloating Property of Artificial Aggregates Made from Dredged Soil
- Investigation of Hydrogen Distribution from the Surface to the Depth in Technically Pure Titanium Alloy with the Help of Glow Discharge Optical Emission Spectroscopy
- Experimental Investigation of CO2 Separation from Hard Coal Flue Gases by 100 cm2 Molten Carbonate Fuel Cell
- Oxidic Composite for Dental Purposes: Effect of the Laminin 1 Adsorption on Cells Growth
- Effects of Substituting Ni with Mn on Structure and Hydrogen Storage Characteristics of as-Spun Mg2Ni-Type Alloys
- Abrasion Resistance of Alumina-Titanium Dioxid Coating at High Temperature
- The Study on the Removal of Ammonia Nitrogen in Wastewater by Thin Film Coating Photo-Catalytic Oxidation Process
- Modeling Wood Density of Larch Using Random Effects Models
- A Comparative Study on Electrochemical Behavior of (La,Sr)FeO3 and (La,Sr)FeO3-(La,Sr)MnO3 Anodes for Solid Oxide Electrolysis Cells
- Solid State Bonding of CuCrZr to Duplex Stainless Steel
- The Limiting Dome Height Tests and Formability of Magnesium Alloy Sheet AZ31B
- Influence of Substrate on Structure and Magnetic Properties of Bi0.9Nd0.1FeO3 Thin Films by Radio Frequency Magnetron Sputtering Method
- Reaction of Magnesium Hydride with Water to Produce Hydrogen
- Nitric Acid Activated Carbon Aerogels for Supercapacitors
- Research on the Elastic Property of Three New Superhard Materials
- Optical Properties of Films of Graphite Oxide, Reduced Graphite Oxide and its Intercalated Compounds with Ammonium Dodecahydro-closo-Dodecaborate
- Enhanced Photocatalytic Activity of TiO2/Graphene Oxide Nanocomposites Prepared by the Sol-Gel Method
- Composite Anisotropic Conductive Film
- Rapid Discrimination of Fermented Cordyceps Mycelium Powder by Near-Infrared Spectroscopy (NIRS)
- Supercontinuum Generation in Nonperiodic Photonic Crystal Fibers and its Application in Frequency Metrology
- Nonlinear Oscillations of Functionally Graded Materials Rectangular Thin Plates with Parametrical and External Excitations
- High Flux Nanofiltration Membranes Prepared by Dynamic Self-Assembly of PSS-co-MA and PAH for CuCl2 Removal
- Finite Element Analysis for the Influence of Nanoparticles on the Thermal Resudual Stressinfiber Reinforced Composite
- Study of the Effect of MoS2 and PTFE Based Coatings on Adhesive Wear of Stainless Steel
- Graphene Oxide Oxidized by NaClO as a Highly Effective Adsorbent for Fast Removal of Dye Rhodamine B
- Rare Earth Luminescent Materials in Landscape Lighting Application
- Effect of Electron Beam Welding on Microstructure and Mechanical Properties of Spray-Deposited Al-Zn-Mg-Cu Alloy
- Temperature Analysis for Circumferential Electric Discharge Milling and Mechanical Grinding Compound Machining of SiC Ceramic
- Effect of Fast Prototyping Means on the Fatigue Strength of High Carbon Steels
- A Design Concept of an Orthopedic Bone Drilling Mechatronics System
- Creep Behavior of 409L and 436 Ferritic Stainless Steels Applied for Automotive Exhaust System
- Numerical Simulation on Temperature and Stress Field of Multi-Pass Welding of Thin Stainless Steel Plate
- Effect of Heat Treatment on the Microstructure and Hardness of a Newly Developed Plastic Injection Mold Steel
- The Research of the High Speed Steels Produced by Powder and Casting Metallurgy from the View of Tool Cutting Life
- A New Model of Predicting the Hydrogen Element in Coal-Fired
- Thermodynamics Study on the Theophylline-Nicotinamide Cocrystal
- Effect of Grain Size and Annealing Condition on Grain Boundary Segregation of Carbon Atoms in ULC Steel
- What Is the Optimum Cover Factor?
- Effect of Coiling and Normalizing Annealing on the Microstructure of a Newly Developed Cold-Rolled Non-Oriented Electrical Steel
- Influence of Porosity on the Mechanical Properties of Cu/LDPE Porous Composites for Intrauterine Contraceptive Devices
- Hydrogen Permeation Behavior through HSLA Steels and its Implications on Hydrogen Embrittlement Susceptibility
- Time Frequency Analysis of Femoral Doppler Ultrasound Signals by AR Modelling
- Study of a Wave Absorber in Various Distance Placed in a Sinusoidal Propagate Wave
- Mechanical and Electrical Products Reliability Estimation under Weibull Distribution Based on Accelerated Life Test
- Structural Behavior of Reinforced Concrete Beams Strengthened with Carbon Fiber Reinforcement Polymer Plate
- Analysis on Displacement Performance Affected by Machining Errors of Single-Notch Right Circular Flexure Hinge
- Experimental and Numerical Study on Seismic Performance of Flat Columns under Bilateral Cyclic Loading
- Reliability of Gravity Foundation in Coral Sands Subject to Dynamic Wind Load
- Experimental Study on Bond-Slip Constitutive Relation between CFL and Concrete
- Modified Friction Stir Channeling: A Novel Technique for Fabrication of Friction Stir Channel
- Channel Formation in Modified Friction Stir Channeling
- Static Aeroelasticity Analysis of High Aspect Ratio Wing and the Jig-Shape Design Based on Multi-Block Structural Grid
- Modification for Quantitative Analysis of Welding Residual Stress by X-Ray Stress Analyzer
- Acoustic Transceiver Optimization Analysis for Downhole Sensor Data Telemetry via Drillstring
- Study on Mechanical Properties of Cement Clinker and Limestone by Hertzian Indentation Method
- Acoustic and Vibration Characteristics of Finite Cylindrical Shell-Circular Plate Based on Lagrange Equations
- Guiding Solid Elastic Waves to Arbitrary Paths by Isotropic Materials
- The Utilization of Heat Pipe on Cold Surface of Thermoelectric with Low-Temperature Waste Heat
- Study for the Method of Pressure Ease in Metro Transfer Station
- Use of Nanofluids for Enhanced Natural Cooling of Discretely Heated Enclosures
- The Influence of Geometry, Manufacturing Asymmetry and Asymmetric Excitation on Vertical Vibration of a Mechanical System
- The Design of FlexRay-Based Node Communication
- Investigations of an Ion Transport Membrane Reactor Specially Designed for a Power Cycle
- Study on the Electromechanical Coupling Performance of Bimorph Piezoelectric Cantilever
- Measurements of Residual Stress and Angular Distortion of 7075 Aluminum Alloy after Gas Tungsten Arc Welding
- A Study on the Thermal Load Saving of an University Office Building with Passive Items
- A Study on the Vibration Characteristics of the Optical Structure in the Aerial Vehicle and Optimisation Using Robust Design
- Evaluation of Mechanical and Thermal Stresses in Polymer Gear Teeth through Simulation Approach
- Vibration Fault Diagnosis of Rotating Machinery Using PSO-Based Radial Basis Function Network
- Residual Strength of the CFRP- Strengthening Small Concrete Columns in Fire Situation
- Mechanical Structural Optimization and Research for an Intelligent Vehicle Model
- Traction Motor Base Multi-Condition Finite Element Strength Analysis
- Experimental Study on Leaf-Stripping Mechanism of Separating Machinery for Corn Stalk Skin Flesh Leaf
- The Finite Element Analysis of Temperature Cracking Propagation Process of Pouring Mass Concrete
- An Advanced Technology for Enhancement of Transmission Loadability Using FACTS Devices
- Adapting Optimal Operation Strategy for the Chiller Plant of a Semiconductor FAB
- Study of Wear Phenomena of Coatings for Die-Casting
- Handling Dynamic Concerns of Designing a Platform for Mechatronic Software Systems
- Development of the Environment-Friendly Wild Jujube Date Pit Taking Machine
- A Methodology for Systematic Geometric Error Compensation in Integrated Inspection and Machining
- The Operational Modal Analysis of an Industrial Sewing Machine
- Feature Size Measurement of Multihole Sheet Metal Part Based on HALCON
- Finite Element Analysis for the Design of Branched Artificial Blood Vessel of Aortic Arch
- Optimization of the Compositions of PEG/PMMA Binder System in Ceramic Injection Moulding via Water-Debinding
- Implementation and Motion Planning of a Dual Arm Service Robot
- The Controlling Research of the 3D Bionic Snake-Like Robot Based on the Arduino
- The Optimization Design of High Precision Long-Range Cartesian Coordinate Robots' Drive System
- A High By-Pass Ratio Turbofan Model Based on CMF Method
- Multidisciplinary Design Optimization of Small Canister-Launched Space Launch Vehicle Using Genetic Algorithm
- Three-Dimensional Computation Design of a Novel Sediment Sampler
- Technical Regulation for Numerical Simulation on Processing Technology of Large Forgings
- Based on Static Interval Finite Element Method of Analysis of Rigid Frame Structure
- Development of a Therapeutic Device for Osteoporosis
- A Quantum Repeater Based on Entanglement Purification and Entanglement Swapping
- The Total Design of Reverse Engineering CAM Module Based on Pro/NC
- Prediction of the Slagging Characteristics of Coal Ash Based on Symmetric Fuzzy Cross Entropy and Vague Sets
- Dynamic Time History Analysis on Groundwater Hydraulic Tunnel under Three Dimensional Viscoelastic Boundary Conditions
- Numerical Analysis on the Influence of the Unsteady Effect upon the Flow Characteristics in a Human Airway
- The Interface Design and Usability Evaluation of Interactive Virtual Reality Navigation System
- Numerical Study on Aerodynamic Characteristics of NACA0015
- Policy-Combination Oriented Optimization for Supply Chain Simulation
- Design and Implementation of the Simulation Information System of Marine Oil Spill
- Interface Design of the Location-Based M-Tourism Application
- Tracking Control of an Uncertain MEMS Resonator via Adaptive Terminal Sliding Mode Control
- Performances Analyzing of Parallel Inverter System Based on an Improved Fuzzy Control Method
- Energy Information Communication Technologies for Smart Home Applications
- A Method to Identify Bird Constitutive Model and its Parameters
- Research and Development of Quality Traceability System Based on Intelligent Services for Bee Products
- The Design of Bee Products Quality Tracking System Based on Android Smartphone
- Mean Shift Tracking with Advanced Background-Weighted Histogram
- Design and Implementation of Testing and Management System on Special Information Security Products
- Reliability of Duffing-van der Pol Oscillator with Delayed Feedback Control under Wide-Band Noise Excitation
- Integrated Design of Feedback Controller and UIO: An LMI Solution
- The Design of Simultaneous Location and Mapping System for Intelligent Vehicle in Indoor Environment
- Building Cyberinfrastructure for Data Management and Sensor Control in Ocean Observation
- Design of Prototype System for Seafloor Observatory Network
- Development of an Omnidirectional AGV with Global Localization System
- Sensorless Vector Control System Design of Permanent Magnet Synchronous Motor
- Linear-Matrix-Inequality-Based Fault Diagnosis for Gas Turbofan Engine Using Eigenstructure Assignment Principle
- Automated FE Analysis for Heat Sink of LED Modules
- Design of Bamboo Strip Detection System Based on Labview and Matlab Mixed Programming
- Research of Solar Photoelectric Micro-Power Supply on Chip
- Hybrid Differential Evolution for Power Economic Dispatch Problems Considering the Incorporated Cost Model
- An Overview of the Recommender System