Advanced materials and engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2012), 16-17 December 2012, Beijing ; 29-30 December, Shanghai /
Saved in:
Meeting name: | International Conference on Advanced Materials and Engineering Materials (2nd : 2012 : Beijing, China, and Shanghai, China) |
---|---|
Imprint: | Durnten-Zurich, Switzerland : Trans Tech Publications, [2013] ©2013 |
Description: | 1 online resource (970 pages) : illustrations. |
Language: | English |
Series: | Advanced materials research, 1022-6680 ; volume 683 Advanced materials research ; v. 683. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11217884 |
Table of Contents:
- Blue Upconversion Luminescence from Phosphor Tm3+/Yb3+ Co-Doped Gd2Mo3O9
- Microstructure and Magnetic Properties of Fe-Si-Al Soft Magnetic Composite
- Preparation and Purification Properties of Poly(Vinyl Alcohol) Nano-Fibers Based Sandwich Structure Material
- Investigation for the Fracture Process of WCp/Cu Functionally Graded Materials under Three-Point-Bending
- Properties and Performance Analysis of Woven Roving Composite Laminates for Automotive Panel Board Applications
- Study on Synthesis of Cyclotriphosphazene Containing Aminopropylsilicone Functional Group as Flame Retardant
- Synthesis of SiO2/CeO2 Nanopaticles with Core/Shell Structure and Their Polishing Performance
- Design, Synthesis and Biological Activity Evaluation of Novel N-Acylation Substituted Isatin Derivatives
- TiO2 Immobilized in RPF-AA Fiber for Photocatalytic Degradation of Low Concentration Methylene Blue in Aqueous Solution
- Study on the ZnO-B2O3-SiO2 Glass-Ceramic with DTA, XRD and SEM
- A Review on the Methods of Improving Fiber Distribution of Engineered Cementitious Composites (ECC)
- The Influence of Tread Material Oil Aging on Tire Performance
- Room Temperature Magnetocaloric Effect of the Cox(MnSb)1-x Compounds
- Microstructure and Electrochemical Behavior of Sm0.5Sr0.5CoO3 Deposited by Solution Precursor Plasma Spraying
- Characteristics of BiFeO3 Thin Films on a LaAlO3 Substrate by RF Sputtering
- Magnetic Concentration Phase Transitions in Ultrathin Films
- Synthesis and Characterization of Surface Modified Red Pigment 48:2 for Electrophoretic Display
- Relationship between Life, Load and Rotation Speed of UHMWPE Bearing under Dry Rolling Contact Fatigue
- Mechanical Properties at High Temperatures and Microstructures of a Nickel Aluminum Bronze Alloy
- Effect of PTFE Retainer on Friction Coefficient in Polymer Thrust Bearings under Dry Contact
- Sintering and Dielectric Properties of Sr-Rich Barium Strontium Titanate (BST) Ceramics Fabricated by a Mixed-Phase Method
- Application of Photocatalytic Concrete Paint and its Effect of Decomposing Vehicle Exhaust
- Phase-Change Materials and Building Energy Saving
- Second-Order Non-Linear Optical Properties of Y-Type S-Triazine Based Derivatives
- Developing a Wearable Multifunctional Composite Component
- Effect of Dynamic Strain Aging on the Mechanical Performance in Ti/STS439 Clad Materials
- Preparation of Carbon Fiber Reinforced SiC Matrix Composites by PIP Process
- Interfacial Microstructure of Diffusion-Bonded Cu/Cu-Ag/Al Hybrid Alloy
- Effect of Size on Average Molecular Weight of Poly(Methyl Methacrylate) Micropattern during Hot Embossing
- Mechanical and Biological Characteristics of Electrospun PCL Meshes - the Influence of Solvent Type and Concentration
- Evaluating the Properties of an Alginate Wound Dressing for Skin Repair
- Ageing Effect on Mechanical Properties of Machined Nanostructures
- Density Functional Theory Studies of Substitutionally Si-Doped Single-Walled Carbon Nanotubes
- Synthesis of SnO2 Nanotubes as High Performance Energy Storage Material for Photocathodic Protection of Metals
- Surface Morphology in Milling Multidirectional Carbon Fiber Reinforced Polymer Laminates
- Studies on the Bioceramic Coating on Titamium Substrate Including Silicon and Calcium by Micro-Arc Oxidation and Osteoblast's Adhesion and Proliferation on the Coating
- PCL and PCL/PLA Scaffolds for Bone Tissue Regeneration
- Quantum Cutting Downconversion in Tb3+,Yb3+ Codoped Sr3AlO4F Phosphor
- Elastic Ply Damage Mechanics Modeling of Glass/Epoxy Laminated Composite
- Investigation on Transmittance and Uniformity of Light Diffuser Plate of Filling Coefficient of Microstructure
- The Yield Effect on Soil Improver and Straw Mulch Coupling in Inland Saline Areas
- Application of HVFA Concrete in Massive Structure
- Luminescence Properties and Energy Transfer from Eu2+ to Tb3+ in Sr5(PO4)3F Phosphor
- Synthesis and Characterization of SrSO4:Sm3+ Phosphor with Hierarchical Structures
- Design and Analysis of Optical-Communication-Band Sub-Wavelength Grating Polarizer
- The Effect of Spin-Orbit Coupling on the Electronic Structures and Half-Metallicity of Heusler Compounds: V2ReZ (Z=Al, Ga, ln)
- The Effects of Initiator Content on Sago (Metroxylon rottb.) Starch-G-PAN Hydrogel
- Study on the Hydrolysis of Pollen in Pure Water under Microwave Irradiation
- Study on a Structure of 2,6-Pyridine-Dicarboxylic Acid Lead, Pb(C7H3NO4)
- Application and Research on Luminescent Coating in Interior Design
- Microstructure and Texture Characterstics of a Near-Alpha Titanium Alloy Tube
- Characterization of Contact Resistance between Carbon Nanotubes Film and Metal Electrodes
- Analysis of the Effect of Temperature on Thermal Conductivity of the Insulation Block Made from Secondary Raw Materials
- Experimental Investigations on the Characteristics of Biomass and Coal-Biomass Fuel Briquettes
- Medium Optimization for Active Substance Production of Streptomyces albo#64258;avus TD-1 Using Response Surface Methodology
- Molecular Weight and its Distribution of PET Depolymerization Catalyzed by Zn(Ac)2 under Microwave Irradiation
- Experimental Research on Properties of Low-Density Foaming Concrete
- Numerical Simulation and Monitoring of Mass Concrete Wall Temperature Field
- Photo Polymerization of Thiol-Hyperbranched Polysilazanes
- In Situ Modulation Excitation IR Study on the Dominant Product of Pt-Catalyzed Aromatic Ketone Hydrogenation
- Numerical Simulation of the Transient Temperature Field during Gas Quenching
- Synthesis of sp3C1-Bridged Constrained Geometry Complexes and their Application for Copolymerization of Ethylene and 1-Octene
- Rheological Properties of Polysulfonamide Spinning Solutions with Higher Ratios of p-Phenylene Segments
- Optimization of Micro-Arc Oxidation Electrode Structure by Finite Element Analysis
- The Study on the Synthesis and Luminescent Properties of the Phosphor La2O3: Dy3+
- Investigation of Hot Deformation Characteristics of AISI 4340 Steel Using Processing Map
- Synthesis and Electrochromic Properties of Crystalline 3D Urchin-Like Nanostructures
- Cyclic Stress-Strain Response and Dislocation Configuration of a Beta Phase Containing TiAl Alloy during Isothermal Fatigue Tests under Different Strain Rate
- Mechanical Properties and Microstructure of Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Clad Plate Processed by High Pressure Torsioning (HPT)
- Solvothermal Synthesis and Detailed Analysis of Hydroxyapatite Nanostructure
- Research on the Electro-Exploding Mechanism of Semiconductor Bridge
- Wear Resistance of Graphite / Aluminium Composites that Prepared by Stirring Casting
- Coordination of Polyacrylic Grafted Polytetrafluoroethylene Fiber with Fe (III) Ions in Aqueous Solution
- Adsorption of Zearalenone by Montmorillonite
- Molecular Dynamics Simulation of Structural Changes of Ag965 Clusters during Freezing
- Study of the Erosion-Corrosion Behavior of P110, N80 and VM140 Steel in 3.5wt.%NaCl Solutions with Sand
- Crystal Structure of Ytterbium Chloride Phenanthroline: [YbCl4]·[C12H8N2]·(H2O)
- Effect of Transition Metal on the Thermal Degradation of Cotton Cellulose Modified with THPC
- Analysis on the Non-Arrhennius Life Prediction Method of Rubber
- The Application of Large Particle Size Hot Mix Asphalt Macadam Roadbase Structure in the Maintenance Overhaul Engineering
- Magnetic Dual-Phase State of Superparamagnetic Particles in the Field of Mechanical Stresses
- Experimental Study on Bonding Interface between CFRP and Concrete under Fatigue Load
- Observation of Wear on PEEK-PTFE Hybrid Radial Bearings
- Surface Profile Observation of PTFE Thrust Bearings under Rolling Contact Fatigue in Water
- Study on the Flow- Induced Corrosion of P110 Oil Tube with an Electrochemical Method
- Experimental Research of Foam Concrete with Different Fly Ash Level
- Research Status and Prospect of Constitutive Relation for Concrete after Freeze-Thaw Damage
- Surface Morphology Investigation of Poly(ether ether ketone) Immobilized with Heparin and Bovine Serum Albumin
- Analysis of Relationship between Porosity and Roughness of Surface Based on Fractal Model
- Two Dimensional Photonic Crystal Biosensors
- Flex Fatigue of Side Emitting Optical Fiber
- Experimental Research of Foaming Concrete Performance at Different Water Temperature
- Experimental Research of Foaming Concrete Performance with Different Ash Calcium
- Influence of Load and Rotation Speed on Life of PPS Radial Bearings under Water Lubricant Conditions
- Environmental Assessment of Production of Thermal Insulation Block from Secondary Raw Materials
- Research on the Super Rapid Strength Repairing Material Effects Resistance to Water Damage Performance of Cement Stabilized Macadam
- Isothermal Transformation of Wustite for Low Carbon Micro-Alloyed Steel
- The Research of the Application of Smart Coatings on Architectural Ornaments
- Effects of Niobium and Titanium on the As-Cast Microstructure of Cr8Mo2VSi Cold Work Die Steel
- Research on Sol-Gel Transition Process of Gelatin
- Feasibility Study for Copper/Zirconium Oxides as Oxygen Carrier in Chemical Looping Air Separation (CLAS)
- Study on the Preparation and Catalytic Property of Sulfonated Ordered Mesoporous Carbon
- Research on Dynamic Recrystallization Behavior of 20CrMo Alloy Steel during Hot Deformation
- Meshless Modeling of the Breakage Process of a Coal Prism within Vertical Roller Mills
- Development and Application of Prediction Model for End-Point Manganese Content in Converter Based on Data from Sub-Lance
- Effect of Sb Substitution on the Crystal Structure and Multiferroic Properties of BiFeO3
- The Pozzolanic Activity of the Coal Gauge and its Evaluation
- Effect of Feedstock Type on Microstructure and Polarization of Plasma Sprayed LSM Cathode for Solid Oxide Fuel Cells
- Preliminary Research on Brazability of SiC Particulate Reinforced Aluminium-Based Composites
- The Impact of Porphyrin Meso-Position Steric Effect on Porphyrin Density on TiO2 Surface of DSSC
- Calculating of the Beating-Up Force for 3D Weaving
- Kinetics and Thermodynamic Investigation of Phosphate Adsorption on AlCl3 Modified Palygorskite
- Preparation of Hydrotalcites Derived Ni/Co/Cu/Fe Nanocomposite Oxides and their Catalytic Activities for Thermal Decomposition of Ammonium Perchlorate
- The Research of Konjac Glucomannan Fracturing System
- OPTIMALMOULD | Cooling System Influence in Injection Moulding Cycle Time Optimization
- Finite Element Simulation on Tire Rubber Extrusion Process
- Influence of Forming Velocity on Service Performance of Resistance Wall Structural Die
- Modeling and Simulation of High Speed Intermittent Cutting Based on the Finite Element Method
- Choice of Materials and Application of New Materials in Industrial Design
- Separation Test of Copper-Zinc-Sulfur Mixed Concentrate in Kazakhstan
- Study on Melting Properties of CaO-Al2O3-SiO2-MgO System Calcium Aluminate Flux
- Effect of Spark Plasma Sintering Temperature on Microstructures and Properties of Copper-Diamond Composites
- Study on the Formation Mechanism of Micro-Arc Oxidation Layer in Aviation
- Study on the Surface Roughness of Titanium Alloy Machined by WEDM
- Technical Principle and Working Properties of Sludge Dredging by Airlift Water Jet
- Arbitrary Curvature Radius of the Optical Parts Precision Polishing Technology
- Experiment Research on Preparation Pigment Type Magnetic Iron Oxide Powder Utilizing Magnetic Separated Slag
- Thermal Stress Analysis for Local Heating Variable Cross-Section Roll Forming
- Finite Element Analysis and Fracture Forecast of U Channel Flexible Roll Forming
- Analytical Investigation on the Aging Process of Vegetable Insulating Oil
- The Controlled Powders Morphology of Bismuth Niobium Titanate Depending upon the Isothermal Annealing
- Sapphire Substrate Ring-Belt Magnetorheological Polishing Processing
- Research on Flotation Mechanism of Quartz Using Magnesium Ion as Activator
- Effect of Forced Convection on Grain Refinement of S32205 Duplex Stainless Steel
- Selection of Process Parameters for Laser Assisted Machining of Al2O3 Ceramics
- Comparative Study of Different Types of Flashes on the Flange Open-Die Forging
- Effect of Premelted Calcium-Magnesium-Aluminate Flux on Magnesia Carbon Brick
- Effect of Microalloying on Structures and Properties of Aluminum Alloy
- Controlled Synthesis of Calcium Carbonate Crystals with Superstructure on the Templates of Bamboo Leaves /Mg2+
- 3-D CFD Modeling the Straight Blade Vertical Axis Wind Turbine
- The Design of the Mechanical Heart Valve by Using the Parametric Method
- Hardware System Design of the Control System for Three Dimensional Variable Cross-Section Roll Forming
- Analysis on Factors to Cause the Price Change of Building Materials
- Monitoring of Blast Furnace Hearth Erosion
- A Design Method Using SOA Paradigm for Mobile Cloud Computing Services over Multimedia Convergence Networks
- Research on Auto Matching of Measuring Points Data with CAD Model for Hull Blocks
- Application of Analytic Hierarchy Process in the Steel Industry
- Experimental Device of Drilling String Dynamics in Horizontal Well and its Application
- Research on Experiment Modal Parameters Identification of Parallel Manipulator
- A Reconfigurable MES Model Based on Hierarchy
- Dynamic Simulation Analysis of the Vibratory Sinking Piling System Based on AMESim
- Optimization of Multiresponse Performance Measure in Slider-Rocker Compliant Mechanism Using Fuzzy-Taguchi Method
- A Method to Measure the Station of Artificial Mechanical Heart Valves
- Research on the Fuzzy Control for Vehicle Semi-Active Suspension
- The Influence of Material Optical Properties on Temperature Distribution in an Automotive Lamp
- Underwater Wet Weld Seam Tracking Based on Passive Visual Sensor
- Characterization of Metal-Semiconductor Schottky Diodes and Application on THz Detection
- Analysis on the Incompleteness of Moral Hazard Model
- Graph-Theoretic Models for the Module of Safe Planning for Control Systems of Mobile Robots
- The Application Research of Six-Axis Force Sensor Used by Trans-Femoral Prosthesis
- Structure Design of a Novel Triaxial Micro-Accelerometer
- The Comparative Model Analysis of Electronic Button-Sewing Machine Shell Based on Simulation and Experiment
- Cybernetics in Planning and Design
- Research on the Relationship between the Transaction Cost and the Corporate Governance
- System Dynamics Mechanism Analyses on Building Materials Enterprise Factoring Risk
- Research on Co-Branding Strategy in New Materials Industry
- Bio Inspired Algorithms for Injection Moulding Optimization
- Functionally Graded Structures through Building Manufacturing
- Nonlinear Natural Frequencies of Rotating Composite Thin-Walled Beam with Geometrical Nonlinear
- Estimation and Analysis for the Fatigue Life of Rail Joint Bolt
- Design of Cylinder Positioning System Based on Proportional Valve
- Analysis and Judgment of the Local Loss Based on the Entropy Gradient
- Mapping Matrix of Variable Cross-Section Roll Forming Based on Visual Detection
- Research on Mars Surface Image Visual Feature Extraction Algorithm
- Reconfigurable Control Software for Additive Manufacturing Machines
- A Quantitative Analysis of Lake Tourism Resource Value Based on AHP-Fuzzy Comprehensive Evaluation Method
- Reliability Enhancement Test of Detection and Control Unit
- Numerical Study of Droplet Formation Time on Solid Surface
- Dynamic Target Tracking Based on Particle Filter in Actual Environment
- Sea Bottom EM Field of M2 Tidal to Probe Upper Mantle Conductivity
- Research on Accounts Receivable Financing Model Based on E-Commerce Platform
- Research on Electronic Equipment Fault Diagnosis Expert System Based on Embedded Linux
- A Multi-Tip Turning Tool Structure for Thin and Long Pieces
- Research on Dynamic Characteristics for Large Span Cable-Stayed Suspension Bridges with CFRP Cables
- Research on the Parametric Design System for the Excavator Working Device
- COM Component Based on Matlab Algorithm for Speckle Processing
- Design and Analysis of a Novel Wavelength-Selelctive Waveguide Photodetector
- An Ultrasonic Motor Precision Adjustable Speed Scheme Study and Analysis
- Simulation of Airflow Motion in Jet Nozzle with Different Geometric Parameters
- Modeling, Analysis and Simulation of Bluetooth Process Based on SystemView
- The Motor Fault Diagnosis Based on Neural Network and the Theory of D-S Evidence
- Study on MR Imaging of Endothelial Progenitor Cells Labeled with the Complex of Super Paramagnetic Iron Oxide and Transfection
- Capillary Effects during Droplet Formation on the Solid Surface
- Design for Laser Beam Cutting Machine Tools Integrated NC System
- A Study on Fault Diagnosis of Gears Based on Local Mean Decomposition Method
- Soil-High-Rise Building Group Dynamic Interaction Considering Site Effect
- Self-Learning of Robots and the Model of Hamiltonian Path with Fixed Number of Color Repetitions for Systems of Scenarios Creation
- Numerical Simulation for Effects of Running Surface Profile Structure in Piston Ring Group on Blow-By and LOC
- Mass Customization in the Tourism Industry of China
- Application of AHP in Material Selection in Slope Protection Project in Riverway
- Electronic Equipment Fault Diagnosis Expert System Based on PDA/HPC
- Study of Milling Thickness and Milling Force on Two Directions Ultrasonic Vibration Assisted Milling
- Optimization of Electrode Structures of PZT Acoustic Energy Harvesters Fabricated on SOI Substrate
- A Magnetic-Assistance System as a Super Finishing Following Turning Machining
- Analysis of Coal Gangue Pollution Control Technology