Advanced materials and engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2012), 16-17 December 2012, Beijing ; 29-30 December, Shanghai /

Saved in:
Bibliographic Details
Meeting name:International Conference on Advanced Materials and Engineering Materials (2nd : 2012 : Beijing, China, and Shanghai, China)
Imprint:Durnten-Zurich, Switzerland : Trans Tech Publications, [2013]
Description:1 online resource (970 pages) : illustrations.
Series:Advanced materials research, 1022-6680 ; volume 683
Advanced materials research ; v. 683.
Subject:Materials science -- Congresses.
Materials -- Congresses.
TECHNOLOGY & ENGINEERING -- Engineering (General)
Materials science.
Electronic books.
Conference papers and proceedings.
Electronic books.
Format: E-Resource Book
URL for this record:
Hidden Bibliographic Details
Varying Form of Title:ICAMEM 2012
Other authors / contributors:Kida, Katsuyuki.
Notes:Includes bibliographical references and indexes.
Online resource; title from PDF title page (ebrary, viewed October 31, 2013).
Summary:The Aim of ICAMEM2012 was to present the latest research and results of scientists related to advanced materials and engineering materials topics. The papers are grouped as follows: Chapter 1: Advanced Materials and New Materials; Chapter 2: Engineering Materials Research; Chapter 3: Materials Processing Technology; Chapter 4: Other Engineering Solutions for Manufacturing. More than 200 papers are arranged in sections on advanced materials and newmaterials, engineering materials research, materials processing technology,and other engineering solutions for manufacturing. Among the topics aresyn.
Other form:3-03785-666-1
Table of Contents:
  • Blue Upconversion Luminescence from Phosphor Tm3+/Yb3+ Co-Doped Gd2Mo3O9
  • Microstructure and Magnetic Properties of Fe-Si-Al Soft Magnetic Composite
  • Preparation and Purification Properties of Poly(Vinyl Alcohol) Nano-Fibers Based Sandwich Structure Material
  • Investigation for the Fracture Process of WCp/Cu Functionally Graded Materials under Three-Point-Bending
  • Properties and Performance Analysis of Woven Roving Composite Laminates for Automotive Panel Board Applications
  • Study on Synthesis of Cyclotriphosphazene Containing Aminopropylsilicone Functional Group as Flame Retardant
  • Synthesis of SiO2/CeO2 Nanopaticles with Core/Shell Structure and Their Polishing Performance
  • Design, Synthesis and Biological Activity Evaluation of Novel N-Acylation Substituted Isatin Derivatives
  • TiO2 Immobilized in RPF-AA Fiber for Photocatalytic Degradation of Low Concentration Methylene Blue in Aqueous Solution
  • Study on the ZnO-B2O3-SiO2 Glass-Ceramic with DTA, XRD and SEM
  • A Review on the Methods of Improving Fiber Distribution of Engineered Cementitious Composites (ECC)
  • The Influence of Tread Material Oil Aging on Tire Performance
  • Room Temperature Magnetocaloric Effect of the Cox(MnSb)1-x Compounds
  • Microstructure and Electrochemical Behavior of Sm0.5Sr0.5CoO3 Deposited by Solution Precursor Plasma Spraying
  • Characteristics of BiFeO3 Thin Films on a LaAlO3 Substrate by RF Sputtering
  • Magnetic Concentration Phase Transitions in Ultrathin Films
  • Synthesis and Characterization of Surface Modified Red Pigment 48:2 for Electrophoretic Display
  • Relationship between Life, Load and Rotation Speed of UHMWPE Bearing under Dry Rolling Contact Fatigue
  • Mechanical Properties at High Temperatures and Microstructures of a Nickel Aluminum Bronze Alloy
  • Effect of PTFE Retainer on Friction Coefficient in Polymer Thrust Bearings under Dry Contact
  • Sintering and Dielectric Properties of Sr-Rich Barium Strontium Titanate (BST) Ceramics Fabricated by a Mixed-Phase Method
  • Application of Photocatalytic Concrete Paint and its Effect of Decomposing Vehicle Exhaust
  • Phase-Change Materials and Building Energy Saving
  • Second-Order Non-Linear Optical Properties of Y-Type S-Triazine Based Derivatives
  • Developing a Wearable Multifunctional Composite Component
  • Effect of Dynamic Strain Aging on the Mechanical Performance in Ti/STS439 Clad Materials
  • Preparation of Carbon Fiber Reinforced SiC Matrix Composites by PIP Process
  • Interfacial Microstructure of Diffusion-Bonded Cu/Cu-Ag/Al Hybrid Alloy
  • Effect of Size on Average Molecular Weight of Poly(Methyl Methacrylate) Micropattern during Hot Embossing
  • Mechanical and Biological Characteristics of Electrospun PCL Meshes - the Influence of Solvent Type and Concentration
  • Evaluating the Properties of an Alginate Wound Dressing for Skin Repair
  • Ageing Effect on Mechanical Properties of Machined Nanostructures
  • Density Functional Theory Studies of Substitutionally Si-Doped Single-Walled Carbon Nanotubes
  • Synthesis of SnO2 Nanotubes as High Performance Energy Storage Material for Photocathodic Protection of Metals
  • Surface Morphology in Milling Multidirectional Carbon Fiber Reinforced Polymer Laminates
  • Studies on the Bioceramic Coating on Titamium Substrate Including Silicon and Calcium by Micro-Arc Oxidation and Osteoblast's Adhesion and Proliferation on the Coating
  • PCL and PCL/PLA Scaffolds for Bone Tissue Regeneration
  • Quantum Cutting Downconversion in Tb3+,Yb3+ Codoped Sr3AlO4F Phosphor
  • Elastic Ply Damage Mechanics Modeling of Glass/Epoxy Laminated Composite
  • Investigation on Transmittance and Uniformity of Light Diffuser Plate of Filling Coefficient of Microstructure
  • The Yield Effect on Soil Improver and Straw Mulch Coupling in Inland Saline Areas
  • Application of HVFA Concrete in Massive Structure
  • Luminescence Properties and Energy Transfer from Eu2+ to Tb3+ in Sr5(PO4)3F Phosphor
  • Synthesis and Characterization of SrSO4:Sm3+ Phosphor with Hierarchical Structures
  • Design and Analysis of Optical-Communication-Band Sub-Wavelength Grating Polarizer
  • The Effect of Spin-Orbit Coupling on the Electronic Structures and Half-Metallicity of Heusler Compounds: V2ReZ (Z=Al, Ga, ln)
  • The Effects of Initiator Content on Sago (Metroxylon rottb.) Starch-G-PAN Hydrogel
  • Study on the Hydrolysis of Pollen in Pure Water under Microwave Irradiation
  • Study on a Structure of 2,6-Pyridine-Dicarboxylic Acid Lead, Pb(C7H3NO4)
  • Application and Research on Luminescent Coating in Interior Design
  • Microstructure and Texture Characterstics of a Near-Alpha Titanium Alloy Tube
  • Characterization of Contact Resistance between Carbon Nanotubes Film and Metal Electrodes
  • Analysis of the Effect of Temperature on Thermal Conductivity of the Insulation Block Made from Secondary Raw Materials
  • Experimental Investigations on the Characteristics of Biomass and Coal-Biomass Fuel Briquettes
  • Medium Optimization for Active Substance Production of Streptomyces albo#64258;avus TD-1 Using Response Surface Methodology
  • Molecular Weight and its Distribution of PET Depolymerization Catalyzed by Zn(Ac)2 under Microwave Irradiation
  • Experimental Research on Properties of Low-Density Foaming Concrete
  • Numerical Simulation and Monitoring of Mass Concrete Wall Temperature Field
  • Photo Polymerization of Thiol-Hyperbranched Polysilazanes
  • In Situ Modulation Excitation IR Study on the Dominant Product of Pt-Catalyzed Aromatic Ketone Hydrogenation
  • Numerical Simulation of the Transient Temperature Field during Gas Quenching
  • Synthesis of sp3C1-Bridged Constrained Geometry Complexes and their Application for Copolymerization of Ethylene and 1-Octene
  • Rheological Properties of Polysulfonamide Spinning Solutions with Higher Ratios of p-Phenylene Segments
  • Optimization of Micro-Arc Oxidation Electrode Structure by Finite Element Analysis
  • The Study on the Synthesis and Luminescent Properties of the Phosphor La2O3: Dy3+
  • Investigation of Hot Deformation Characteristics of AISI 4340 Steel Using Processing Map
  • Synthesis and Electrochromic Properties of Crystalline 3D Urchin-Like Nanostructures
  • Cyclic Stress-Strain Response and Dislocation Configuration of a Beta Phase Containing TiAl Alloy during Isothermal Fatigue Tests under Different Strain Rate
  • Mechanical Properties and Microstructure of Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Clad Plate Processed by High Pressure Torsioning (HPT)
  • Solvothermal Synthesis and Detailed Analysis of Hydroxyapatite Nanostructure
  • Research on the Electro-Exploding Mechanism of Semiconductor Bridge
  • Wear Resistance of Graphite / Aluminium Composites that Prepared by Stirring Casting
  • Coordination of Polyacrylic Grafted Polytetrafluoroethylene Fiber with Fe (III) Ions in Aqueous Solution
  • Adsorption of Zearalenone by Montmorillonite
  • Molecular Dynamics Simulation of Structural Changes of Ag965 Clusters during Freezing
  • Study of the Erosion-Corrosion Behavior of P110, N80 and VM140 Steel in 3.5wt.%NaCl Solutions with Sand
  • Crystal Structure of Ytterbium Chloride Phenanthroline: [YbCl4]·[C12H8N2]·(H2O)
  • Effect of Transition Metal on the Thermal Degradation of Cotton Cellulose Modified with THPC
  • Analysis on the Non-Arrhennius Life Prediction Method of Rubber
  • The Application of Large Particle Size Hot Mix Asphalt Macadam Roadbase Structure in the Maintenance Overhaul Engineering
  • Magnetic Dual-Phase State of Superparamagnetic Particles in the Field of Mechanical Stresses
  • Experimental Study on Bonding Interface between CFRP and Concrete under Fatigue Load
  • Observation of Wear on PEEK-PTFE Hybrid Radial Bearings
  • Surface Profile Observation of PTFE Thrust Bearings under Rolling Contact Fatigue in Water
  • Study on the Flow- Induced Corrosion of P110 Oil Tube with an Electrochemical Method
  • Experimental Research of Foam Concrete with Different Fly Ash Level
  • Research Status and Prospect of Constitutive Relation for Concrete after Freeze-Thaw Damage
  • Surface Morphology Investigation of Poly(ether ether ketone) Immobilized with Heparin and Bovine Serum Albumin
  • Analysis of Relationship between Porosity and Roughness of Surface Based on Fractal Model
  • Two Dimensional Photonic Crystal Biosensors
  • Flex Fatigue of Side Emitting Optical Fiber
  • Experimental Research of Foaming Concrete Performance at Different Water Temperature
  • Experimental Research of Foaming Concrete Performance with Different Ash Calcium
  • Influence of Load and Rotation Speed on Life of PPS Radial Bearings under Water Lubricant Conditions
  • Environmental Assessment of Production of Thermal Insulation Block from Secondary Raw Materials
  • Research on the Super Rapid Strength Repairing Material Effects Resistance to Water Damage Performance of Cement Stabilized Macadam
  • Isothermal Transformation of Wustite for Low Carbon Micro-Alloyed Steel
  • The Research of the Application of Smart Coatings on Architectural Ornaments
  • Effects of Niobium and Titanium on the As-Cast Microstructure of Cr8Mo2VSi Cold Work Die Steel
  • Research on Sol-Gel Transition Process of Gelatin
  • Feasibility Study for Copper/Zirconium Oxides as Oxygen Carrier in Chemical Looping Air Separation (CLAS)
  • Study on the Preparation and Catalytic Property of Sulfonated Ordered Mesoporous Carbon
  • Research on Dynamic Recrystallization Behavior of 20CrMo Alloy Steel during Hot Deformation
  • Meshless Modeling of the Breakage Process of a Coal Prism within Vertical Roller Mills
  • Development and Application of Prediction Model for End-Point Manganese Content in Converter Based on Data from Sub-Lance
  • Effect of Sb Substitution on the Crystal Structure and Multiferroic Properties of BiFeO3
  • The Pozzolanic Activity of the Coal Gauge and its Evaluation
  • Effect of Feedstock Type on Microstructure and Polarization of Plasma Sprayed LSM Cathode for Solid Oxide Fuel Cells
  • Preliminary Research on Brazability of SiC Particulate Reinforced Aluminium-Based Composites
  • The Impact of Porphyrin Meso-Position Steric Effect on Porphyrin Density on TiO2 Surface of DSSC
  • Calculating of the Beating-Up Force for 3D Weaving
  • Kinetics and Thermodynamic Investigation of Phosphate Adsorption on AlCl3 Modified Palygorskite
  • Preparation of Hydrotalcites Derived Ni/Co/Cu/Fe Nanocomposite Oxides and their Catalytic Activities for Thermal Decomposition of Ammonium Perchlorate
  • The Research of Konjac Glucomannan Fracturing System
  • OPTIMALMOULD | Cooling System Influence in Injection Moulding Cycle Time Optimization
  • Finite Element Simulation on Tire Rubber Extrusion Process
  • Influence of Forming Velocity on Service Performance of Resistance Wall Structural Die
  • Modeling and Simulation of High Speed Intermittent Cutting Based on the Finite Element Method
  • Choice of Materials and Application of New Materials in Industrial Design
  • Separation Test of Copper-Zinc-Sulfur Mixed Concentrate in Kazakhstan
  • Study on Melting Properties of CaO-Al2O3-SiO2-MgO System Calcium Aluminate Flux
  • Effect of Spark Plasma Sintering Temperature on Microstructures and Properties of Copper-Diamond Composites
  • Study on the Formation Mechanism of Micro-Arc Oxidation Layer in Aviation
  • Study on the Surface Roughness of Titanium Alloy Machined by WEDM
  • Technical Principle and Working Properties of Sludge Dredging by Airlift Water Jet
  • Arbitrary Curvature Radius of the Optical Parts Precision Polishing Technology
  • Experiment Research on Preparation Pigment Type Magnetic Iron Oxide Powder Utilizing Magnetic Separated Slag
  • Thermal Stress Analysis for Local Heating Variable Cross-Section Roll Forming
  • Finite Element Analysis and Fracture Forecast of U Channel Flexible Roll Forming
  • Analytical Investigation on the Aging Process of Vegetable Insulating Oil
  • The Controlled Powders Morphology of Bismuth Niobium Titanate Depending upon the Isothermal Annealing
  • Sapphire Substrate Ring-Belt Magnetorheological Polishing Processing
  • Research on Flotation Mechanism of Quartz Using Magnesium Ion as Activator
  • Effect of Forced Convection on Grain Refinement of S32205 Duplex Stainless Steel
  • Selection of Process Parameters for Laser Assisted Machining of Al2O3 Ceramics
  • Comparative Study of Different Types of Flashes on the Flange Open-Die Forging
  • Effect of Premelted Calcium-Magnesium-Aluminate Flux on Magnesia Carbon Brick
  • Effect of Microalloying on Structures and Properties of Aluminum Alloy
  • Controlled Synthesis of Calcium Carbonate Crystals with Superstructure on the Templates of Bamboo Leaves /Mg2+
  • 3-D CFD Modeling the Straight Blade Vertical Axis Wind Turbine
  • The Design of the Mechanical Heart Valve by Using the Parametric Method
  • Hardware System Design of the Control System for Three Dimensional Variable Cross-Section Roll Forming
  • Analysis on Factors to Cause the Price Change of Building Materials
  • Monitoring of Blast Furnace Hearth Erosion
  • A Design Method Using SOA Paradigm for Mobile Cloud Computing Services over Multimedia Convergence Networks
  • Research on Auto Matching of Measuring Points Data with CAD Model for Hull Blocks
  • Application of Analytic Hierarchy Process in the Steel Industry
  • Experimental Device of Drilling String Dynamics in Horizontal Well and its Application
  • Research on Experiment Modal Parameters Identification of Parallel Manipulator
  • A Reconfigurable MES Model Based on Hierarchy
  • Dynamic Simulation Analysis of the Vibratory Sinking Piling System Based on AMESim
  • Optimization of Multiresponse Performance Measure in Slider-Rocker Compliant Mechanism Using Fuzzy-Taguchi Method
  • A Method to Measure the Station of Artificial Mechanical Heart Valves
  • Research on the Fuzzy Control for Vehicle Semi-Active Suspension
  • The Influence of Material Optical Properties on Temperature Distribution in an Automotive Lamp
  • Underwater Wet Weld Seam Tracking Based on Passive Visual Sensor
  • Characterization of Metal-Semiconductor Schottky Diodes and Application on THz Detection
  • Analysis on the Incompleteness of Moral Hazard Model
  • Graph-Theoretic Models for the Module of Safe Planning for Control Systems of Mobile Robots
  • The Application Research of Six-Axis Force Sensor Used by Trans-Femoral Prosthesis
  • Structure Design of a Novel Triaxial Micro-Accelerometer
  • The Comparative Model Analysis of Electronic Button-Sewing Machine Shell Based on Simulation and Experiment
  • Cybernetics in Planning and Design
  • Research on the Relationship between the Transaction Cost and the Corporate Governance
  • System Dynamics Mechanism Analyses on Building Materials Enterprise Factoring Risk
  • Research on Co-Branding Strategy in New Materials Industry
  • Bio Inspired Algorithms for Injection Moulding Optimization
  • Functionally Graded Structures through Building Manufacturing
  • Nonlinear Natural Frequencies of Rotating Composite Thin-Walled Beam with Geometrical Nonlinear
  • Estimation and Analysis for the Fatigue Life of Rail Joint Bolt
  • Design of Cylinder Positioning System Based on Proportional Valve
  • Analysis and Judgment of the Local Loss Based on the Entropy Gradient
  • Mapping Matrix of Variable Cross-Section Roll Forming Based on Visual Detection
  • Research on Mars Surface Image Visual Feature Extraction Algorithm
  • Reconfigurable Control Software for Additive Manufacturing Machines
  • A Quantitative Analysis of Lake Tourism Resource Value Based on AHP-Fuzzy Comprehensive Evaluation Method
  • Reliability Enhancement Test of Detection and Control Unit
  • Numerical Study of Droplet Formation Time on Solid Surface
  • Dynamic Target Tracking Based on Particle Filter in Actual Environment
  • Sea Bottom EM Field of M2 Tidal to Probe Upper Mantle Conductivity
  • Research on Accounts Receivable Financing Model Based on E-Commerce Platform
  • Research on Electronic Equipment Fault Diagnosis Expert System Based on Embedded Linux
  • A Multi-Tip Turning Tool Structure for Thin and Long Pieces
  • Research on Dynamic Characteristics for Large Span Cable-Stayed Suspension Bridges with CFRP Cables
  • Research on the Parametric Design System for the Excavator Working Device
  • COM Component Based on Matlab Algorithm for Speckle Processing
  • Design and Analysis of a Novel Wavelength-Selelctive Waveguide Photodetector
  • An Ultrasonic Motor Precision Adjustable Speed Scheme Study and Analysis
  • Simulation of Airflow Motion in Jet Nozzle with Different Geometric Parameters
  • Modeling, Analysis and Simulation of Bluetooth Process Based on SystemView
  • The Motor Fault Diagnosis Based on Neural Network and the Theory of D-S Evidence
  • Study on MR Imaging of Endothelial Progenitor Cells Labeled with the Complex of Super Paramagnetic Iron Oxide and Transfection
  • Capillary Effects during Droplet Formation on the Solid Surface
  • Design for Laser Beam Cutting Machine Tools Integrated NC System
  • A Study on Fault Diagnosis of Gears Based on Local Mean Decomposition Method
  • Soil-High-Rise Building Group Dynamic Interaction Considering Site Effect
  • Self-Learning of Robots and the Model of Hamiltonian Path with Fixed Number of Color Repetitions for Systems of Scenarios Creation
  • Numerical Simulation for Effects of Running Surface Profile Structure in Piston Ring Group on Blow-By and LOC
  • Mass Customization in the Tourism Industry of China
  • Application of AHP in Material Selection in Slope Protection Project in Riverway
  • Electronic Equipment Fault Diagnosis Expert System Based on PDA/HPC
  • Study of Milling Thickness and Milling Force on Two Directions Ultrasonic Vibration Assisted Milling
  • Optimization of Electrode Structures of PZT Acoustic Energy Harvesters Fabricated on SOI Substrate
  • A Magnetic-Assistance System as a Super Finishing Following Turning Machining
  • Analysis of Coal Gangue Pollution Control Technology