Materials science and engineering : selected, peer reviewed papers from the 2010 International Conference on Materials Science and Engineering Science, (ICMSES 2010), December 11-12, Shenzhen, China /
Saved in:
Meeting name: | International Conference on Materials Science and Engineering Science (2010 : Shenzhen, China) |
---|---|
Imprint: | Stafa -Zurich : Trans Tech, [2011] ©2011 |
Description: | 1 online resource (1494 pages) : illustrations. |
Language: | English |
Series: | Advanced materials research ; 179-180 Advanced materials research ; v. 179-180. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11217480 |
Table of Contents:
- Research on State of Charge Estimation of Lithium Iron Phosphate Battery Used on Electric Vehicle
- The Three Dimensional Numerical Analysis of Consolidation of Rock Mass with Pre-Stressed Anchor Cables
- Development of Red Laser Positioning Computer-Aided-Signage System
- Analysis for TCSC in Single Phase Power System Simulation
- The Impact of Corrosion on the Mechanical Properties of Smooth Steel Rebar HPB235
- The Method to Construct Elementary Dependent Function Whose Discussion Field is an Infinite Interval and Positive Field Finite
- Numerical Simulation for the System of Ordinary Differential Equations
- Robust Reliability Design for Networked Control Systems Based on Information Scheduling
- Materials Formation Mechanism and Experimental Verification of Micron Long Fiber
- A New Algorithm of Association Rules Mining Based on Relation Matrix
- Improved CPN Network Applying in the Failure Diagnosis of Electronic Gasoline
- High Accuracy Computational Method for Ordinary Differential Equation with Two Small Parameters
- Effect of Warm-up Temperature Rates on Morphologies of Porous Polyimide Membranes
- Study of Deformation Behavior of Ultra-High Molecular Weight Polyethylene (UHMWPE)
- Rigid Body Spring Model for Large Aggregate Concrete
- Research on the Short-Time Bias Stability of the Solid Vibration Beam Gyroscope
- A Scan-Line-Based Hole Filling Algorithm for Vehicle Recognition
- The Improved Algorithm of Edge Detection Based on Canny Operator
- Quasi-Blind Adaptive Video Watermarking Algorithm Based on Human Visual System
- Measuring Vehicle Queue Length with Video
- Vehicle Segmentation Approach Based on the Space-Time and Self-Similarity of Background
- Computer Simulation of Controlled Hydraulic Impactor System
- The Application of Neural Network in Nonlinear System
- Development of a Forward Scattering Spectrometer Probe
- The Morphology and Phases of Cu-In-2Se Powders Prepared by Hydrothermal Method
- CSLA.NET Based N-Layer Application Framework of Warehouse Management System
- Yarn Feeding Compensation Algorithm and Implementation for Needbar Transverse Shifting of Carpet Tufting Machine
- Time Synchronism of Dynamic Password Status Authentication
- Preparation of Nitrogen-Containing Stainless Steels by Vibration Milling and Cold-Press Sintering
- An Advanced Self-Adaptive Iterative Decoding Scheme Based on Stopping Criterion
- Natural Attenuation of Diesel Pollution in Sand Layer of Vadose Zone
- Research on Multidisciplinary Modeling and Robust Control for Electric Power Steering System
- Static Strength and Fatigue Analysis of the Automobile Sub-Frame by FEA Simulation Method and Fatigue Test
- Nitrogen and Lanthanum Co-Doped TiO2 with Enhanced Photocatalytic Activity
- The Characteristic of Petroleum Contaminant Adsorption Materials and the Estimation of Adsorption Attenuation
- A Scalable Routing Architecture for Resource Discovery in Cloud Computing
- Study on Static Assembly Interference Pressure between a Thin-Wall Flexible Cup and a Hollow Flexible Shaft
- Real-Time Model Building of CNC System and its Schedulable Analysis
- A Method of the Image Emotion Notation Based Fuzzy Reasoning
- Algorithm Researching of RBF Neural Network Based on Improved PSO
- The Heat Charge and Discharge Characteristics Simulation of Phase Change Thermal Storage Device
- A No-Reference Quality Assessment System for Video Streaming over RTP
- Interfacial Synthesis of SiO2 Doped by Polyaniline and its Electrorheological Behavior
- Microstructure and Properties of Fe-Based Composite Coating by Plasma Jet Surface Metallurgy
- Design and Realization of Double-Buses Modularized Structure Image Processing System
- A Novel Smart Household Control System by Computer Vision
- Preparation and Retarding Characteristics of Coal/Mg,Al-Hydrotalcite Composites
- Effects of Anodic Oxidation Process on Transmittance of Porous Alumina on Glass Substrate
- Control Method of Preventing Splashing in the Process of BOF Refining Steel Based on Soft-Measuring Technology
- Drying Characteristics of Birch Tree Disk Impregnated with NaCl
- Study on the Order Analysis of the Vehicle Transmission Torsional Vibration
- Study on Phases and Thermoelectric Properties of Bulk FexCo4-xSb12 Sintered by MM-SPS
- Thermal Performance Analysis for High-Speed Spindle of Horizontal Machining Center
- Optimization of Processing Parameters in Injection Molding Based on Adaptive Ant Colony Algorithm
- An Investigation of Reverberation Chamber High-Frequency Vibration-Acoustic Problem for an Aircraft Cabin Title
- Self-Aligned Growth and Optimization of Carbon Nanotube
- A Remote Robot Control System Based on RIA and Flex Platform
- Study on Shape Recovery Behaviors of Epoxy-Based Shape Memory Polymer
- Mechanical Behaviors of Shape Memory Polymer with Linear Monomer
- Effects of Plating Bath Composition and Operating Condition on Properties of Electroless Coating for High Strength Aluminum Alloy
- Anti-Sticking Effects of Cr-N and Zr-DLC Films on Microinjection Molding for LGP Applications
- Simulation on Optoelectronic Properties of Carbon Nanotube Based Device
- Review on Calculation Methods of Structural System Reliability
- Effects of Thermomechanical Treatment Process on the Microstructure and Properties of AZ80 Magnesium Alloy
- Design and Implementation of Hybrid Electric Vehicle Control System CAN Communication
- Review of Genetic Algorithm
- Similarities between Wordsworth and Emerson in Romantic Literature
- Regulatory Effects of High Glucose on the Expression of Toll-Like Receptor Gene and Cytokine Production in Human Peripheral-Blood Mononuclear Cells
- Critical Problems when Analyzing the Flight Force of Insect by its Wing Distortion
- Finite Element Analysis of Pixel Structure of Uncooled Microbolometer for Food Operation Environment
- Thermal Analysis and Simulation of MEMS Thermal Actuator for Food Industry
- Force Analysis on High-Rise Building with a Transfer Story Stress under Seismic Action
- Longitudinal Dynamic Model of AMT Vehicle for Following Condition
- Fuzzy Scatter Matrix Based Class Separability Criterion
- USB2.0-Based Data Acquisition System
- Error Test Analysis of a Taxi Meter
- The Simulation of Burg Algorithm for AR Model Power Spectrum Estimation
- Daqing Spirit and the Enterprise Culture Construction
- USB Interfaces are Based on the Metal which Measurement
- The Performance Analysis of Electro-Rheological Damper
- The Effect of Lightning Strikes on Bismaleimide Composites by Dynamic Mechanical Analysis
- Investigation on Mechanical Behaviors of Shape Memory Alloy Torsion Rod
- Optical Differentiation Method of Materials Based on the Modeling of Scattering Characteristics
- Probability Analysis and Risk Assessment about Vessel-Bridge Collision of Xihoumen Bridge
- Image Encryption Algorithm Based on Even Scrambling
- Performance Evaluation of Construction Materials Management in Expressway Project
- An Improved Channel Estimation Algorithm Based on Superimposed Training Sequence
- Calculation on Interaction between Ozone and Carrier to Form Ozonic Compound
- Study on Impact of Technology Spillover on Technology Transfer and Technology Innovation in Host-Country Firms
- A Study on Effect of Friction Coefficient on Failure Process of Film
- Effect of Borax Content on Composition and Microstructure of Boride Layer by Electrodeposition
- Molecular Dynamics Simulation of Irradiation Damage in bcc Iron
- Adsorption Properties of Self-Assembly Synthesized Microporous Silica Material from Acidic Aqueous Media
- Study on Dynamic Characteristics of the Engine Mounts System Based on the Virtual Prototype
- I2C-Bus Design Based on FPGA
- Development & Application for a Visual Casting Process CAD System of Copper Alloy
- Windows-Based Analysis for HFS+ File System
- Diagnosis Technique Based on BP and D-S Theory
- A Study on Heart Load Affected by Industrial Noise
- An Extraction Algorithm for Image Edge Based on Multifractal Analysis
- Research on Density Control of Wind Jig Dry Coal Preparation System
- Strength Reliability Analyses for Bus Body Frames Based on Monte Carlo Method
- Industrial Test on Outer Frozen Shaft Wall of High Strength and High Performance Concrete
- The Analysis of a Botnet Based on HTTP Protocol
- Web Service and Multi-Agent Based Fault Diagnosis System for MSW Incinerators
- Study on the System Architecture and Multi-View Implementation Mode for Service-Oriented Manufacturing Execution System
- Reduced Recoil Loop Area in Zr Doped #945;-Fe/Nd2Fe14B Nanocomposite Alloys
- Modification of Printing Aluminum Powders by Wet Covering Method with Composite Surfactants
- Study of Intelligent Diagnosis System for Photoelectric Tracking Devices Based on Multiple Knowledge Representation
- A Refined Method for the Extraction of Scutellaria Baicalensis Extracts and its Relationship with Antibacterial Effects
- Selection and Fusion of Indicators for Network Security Situational Awareness
- Natural Attenuation of Diesel Fuels Contaminated Medium Sand with Different Water Content in Vadose Zone
- Structure Reverse Design and Abrasion-Resistant Performance of Submersible Mixer's Impeller Based on 3D Solid Model
- Research on Environmental Optimization Mechanism of the Northeast Old Industrial Base
- Model and Control on Hysteresis of Piezoelectric Actuator
- The Research of Rigid Lapping Technique on Diamond Grating Ruling Tool
- Structured Scheme of Data Mining Based on SQL Server 2005
- Study on 2D Simulation Algorithm and Implementation for Loop Pile Tufted Carpet
- Experimental Study on Seismic Performance of CFRP Concrete Beams
- The Combined Effect of Grain Size and Strain Rate on the Mechanical Behavior in Ultra-High Purity Aluminum
- Primary Industrial Verification of the Polymer Air Drawing Model for the Melt Blowing Nonwoven Process
- The Effect of Cooling Rate to the Extraction Ratio of Boron-Containing Slag
- Integrated Study of Condition Monitoring and Fault Diagnosis System for Flexible Manufacturing System
- Graph Based Learning for Hybrid Algorithm to Image Annotation
- The Influences of Constitutive Models on the Collapses of OFHC Copper Cylindrical Shells under Impact Compression
- Methods on Mechanism Research Based on Differential Geometry
- Study on Mechanism of Propagation of Consolidated Jointed Rock Mass
- Position Detection Methods of Position Sensor-Less Brushless DC Motor
- The Current Study Situation and Prospect Development of Direct Torque Control in PMSM Drive System
- Feasibility Analysis of Small Hydropower Projects ABS Financing
- Hydrogen Storage of Carbon Nanotubes: Theoretical Studies
- Cluster-to-Cluster Relay Schemes in Wireless Sensor Network
- Study on Visual Assembly Process Planning System Based on 3DVIA Composer
- A Spectral Moment Estimation Method for Wind Profile Radar
- Evaluation and Selection of the Strategic Alliance Partner of Port Logistics Based on the Unascertained Set
- Study on Coercivity Mechanism of the Sintered NdFeB Magnets by Zr Addition
- Laser Cladding of Zr55Al10Ni5Cu30/SiC Amorphous Composite Coatings on AZ91D Magnesium Alloy for Improvement of Corrosion Resistance
- Analysis and Design of Automatic Steering Sliding Mode Control
- Oil Pollution and Study Progess on Removal Technology
- A Study on Interface Strength of a-Si:H-DLC Film
- Effects of Co-Substrates and Inorganic Ions on Biodegradation of Oil-Degrading Strains
- Dynamic Modal Analysis of CNC Precision Rotary Worktable
- A New Structure of a Force Sensor Based on the Analysis of Electromechanical Impedance
- Optimal Design of Pre-Forging for Gear Blank Using BP Neural Network and Genetic Algorithm
- Binderless Particleboard from Steam Exploded Wheat Straw
- Development of a Starch Adhesive for Corrugated Board under Room Temperature
- The Dynamic Ant Colony Optimization Based on Permutation and its Application
- Application of COM/DCOM Based Multi-Layer Software Architecture in Measurement & Control Program
- Research of MP3 Audio Digital Watermark Algorithm Based on Hash Values
- Positive Exchange Bias in Tb/Cr Bilayers with TC
- Research on Rotary Power Head of Rock Driller with Higher-Order Elliptic Profile Movable Tooth Transmission
- Research on Rotary Power Head of Drill with Higher-Order Elliptic Profile End Surface Movable Tooth Transmission
- Research of Rotary Power Head of Drill with Roulette Curve Profile Movable Tooth Transmission
- The Problems and Countermeasures of China Energy-Saving Building
- Soft-Sensing Technology in the Combustion Optimization for Power Plant
- Environmental Risk Study on CH3NO2
- Technical Characters and Influencing Factors for Precision of Rapid Prototyping
- Process Analysis and Application for Rapid Prototyping Based on Fused Deposition Modeling
- Robust Watermarking Algorithm Based on Time-Frequency CHIRPLET
- Detection of Relevance between Long-Term Different Professional Training and Brain Development Using EEG
- Characteristic Structures on Film Induced by Femtosecond Laser Pulse Irradiation
- Research of Advancing Mechanism with Three Circular Arc Equidistant Profile Connection of Drill
- The Realization of the IP QoS Based on Network Processor
- Analysis of Hot Leveling Deformation Rate on the Residual Stress of Steel Plate
- A New Buffer Management Mechanism for QoS-Aware IP Router
- Study on the Image Process of Wheels Based on Machine Vision
- A Hybrid Nested Partitions Algorithm Combing with Genetic Algorithm for Job Shop Flexible Resource Scheduling
- Study on the Application of Virtual Reality in Transportation Traffic Problem
- The Application of Fuzzy Neural Network in Data Mining
- Stress Distribution in the Cantilevered Single-Lap Adhesive Joint
- Research on the Text Classification Method with Self-Organization Network Model
- Growth of ZnGeP2 Single Crystal by Three-Temperature-Zone Furnace
- A RFID-Based Monitoring System for Abnormal Logistics Events in Internal Material Supply Chain
- Mechanical Behavior of Reinforced Concrete Beams Externally Strengthened with Carbon Fiber Sheets
- Research of the Chamfer Millers for the Gears
- The Precision Conjugate Theory for the Roller Hourgrass Worm Transmission
- The Application of Data Warehouse in Enterprise Resource Planning
- Experimental Study on Engineering Performance of Portland Cement Stabilization of Soil-Bentonite
- Mutative Scale Chaos Optimization Algorithm and its Application in PID Controller Design of Mobile Robot Systems
- Cascade Compensation Algorithm for Strapdown Inertial Navigation System
- KNN Algorithm Based on Weighted Entropy of Attribute Value
- Network Security Situation Analysis Aimed at Distributed Attack
- An Image Information Extraction Algorithm for Salt and Pepper Noise on Fractional Differentials
- Damage Severity Assessment Using Modified BP Neural Network
- Integrated Shift Strategies of Automatic Mechanical Transmission
- Nonlinear Vibration Characteristics of Flexible Suspension Bridge under Moving Load
- Research of Process on Making Bamboo Particle Board by Laccase-Treated Calcium Lignosulfonate
- Research on Time-Efficiency Oriented Mechanism of After-Sale Service Logistics Operation - China's Automobile Maintenance Industry as Example
- Study on the Application of Low Density SMC for Automotive
- Semi-Cylindrical Hyperlens Made of Al/MgO for 20nm Lithography Node
- A DCT-Based Blind Watermarking Algorithm for Vector Digital Maps
- Study on the Synthesis of Vinyl Ester and its Using as Thickener for SMC
- Research on Application and Development of Competitive Sports Simulation Based on Virtual Reality Technology
- A General Quad Search Tree on Two-Dimension Data
- Numerical Simulation of Infrared Nondestructive Testing to Metal Sample with Subsurface Defects
- The Markov Risk Model under Stochastic Discount Interest Force
- On a Risk Model with Dependence between Interclaim Arrivals and Claim Sizes with Multiple Thresholds under Stochastic Interest
- Prepare of Novel Zirconium Complex and Catalytic Performance for Ethylene Polymerization
- Study on Mid-Span Deflection of Beam Bridge under Moving Loads by the Recently Proposed Oscillator with Time-Dependent Stiffness
- Research on the New Personals Application Based on 3G Mobile and Bluetooth Piconet
- Preparation, Characterization and Biocompatibility of Regenerated Cellulose/PVA Blend Membranes in 1-Allyl-3-Methyimidazolium Chloride
- Design and Realization of IC Card Heat Energy Meter with Supervisory and Control Function
- Numerical Simulation of Thermal Stress Fields of Steel Casting
- Refined Cotton Centrifugal Dewatering Process and Key Technology
- Analysis on Measurement and Comparison of Various Vegetation Canopy LAI in Seacoast Wetland, South China
- The Analysis on Economy Development and Equalization Degree of Six Metropolitan Areas in Middle of China
- Based on NERGA a Novel Decentralized PID for Non-Square System
- Wear Characteristics of Impregnated Diamond Bit in Drilling Armor Ceramic
- An Adaptive Network Fuzzy Inference System Controller for Car Following Behavior
- Linear Programming Solving the Optimization Question of Production Plan
- Research on Robot Working Space Based on Control Theory and Electronic Technology
- Controlled Grown TiO2 on Cellulose Surface via a Hydrothermal Route
- Conceptual Model and Operational Framework of Service-Oriented Manufacturing
- Quantitative Analysis of Metal Film by Laser-Induced Breakdown Spectroscopy (LIBS)
- Quadratic TC-Bézier Curves with Shape Parameter
- Study on one Dimensional Numerical Simulation in Filling Stage of Water-Assisted Injection Molding
- A Method Suitable for Total Protein Extraction from Wood Forming Tissue of Pinus koraiensis
- Polymerization of Methyl Methacrylate with a Novel Titanium Complex
- Fast Visualization Programming of Ocean Remote Sensing Information Based on IDL
- The Construction and Property Analysis of Bogie Wheel with Damping Structure
- Fatigue Life Prediction of Driving Axle Housing Assemble Based on FEA
- Research on Intelligent Control Strategy of Inverted Plasma Cutting Power
- Simulation Research of Inverted Plasma Cutting Power Supply Based on Fuzzy Control
- The Study of the Sports System Simulation Theory and Application
- Fault Detection Method Applied to a Redundant Strapdown Inertial Navigation System
- The Conception and Mechanism of Ship Frequency Scattering due to Maneuvering Motions in Regular Waves
- Direct Orthogonal Neighborhood Preserving Discriminant Analysis
- An Improved Weighted Mixed Bayes Classification Model
- Multi-Agent Based Design for Distributed Fault Diagnosis Systems
- Water Resources and Water Environment Influencing Factors of Biomass Energy Plant (Generating by Straw) in Frigid Zone
- Sheet Metal Multipoint Forming Technology Based on Hydro-Forming
- A Novel Approach to Video Detection for Background Updating and Target Tracking
- The Static Properties of Prestressed Arch Support Single / Double-Layer Reticulated Shells
- Study on the Mechanism of the NaCl Influenced on the Movement of Water Molecular in the Wood
- Compilation of Norm about the Scale of Self-Concept on Junior Middle School Students in the Northwest China Region
- Slot/Pole Ratio Design of Tubular Permanent Magnet Linear Synchronous Motor
- Pure Ni and Pd-Ni Alloy Membranes Prepared by Electroless Plating for Hydrogen Separation
- An Optical Fiber Sensing System for On-Line Measurement of Soil Properties
- Application of Grid Map Method in Woven Fabric with Curved Surface
- Visional Attentional Allocation of Top-down and Bottom-up Cues in Three-Dimensional Space
- PHEV Torque Control of the Pre-Shift Process Based on ANFIS
- A Danger Theory Inspired Security Evaluation Paradigm for Computer Network
- Toughening Study on High Chromium Cast Iron Liner Plates of HZS Series Commercial Concrete Mixing Plant
- Wave Arrival Direction Estimation Adaptive Antenna Array with Music Algorithms
- Designing of Detecting and Measurement System for Car Security Based on Supersonic Principle
- Design and Memory Optimization of Motion Estimation Module for H.264/AVC Encoder
- Reliability Evaluation for Pressure Vessel Enterprises Manufacturing Execution System
- Fast Measurement of Fruit Tree Nitrogen Status Based on Multi-Color LEDs and BP-ANN
- Study on a Flexure Hinge-Based Micro-Displacement Platform
- Static Var Compensator Technology and its Progress
- Response Analysis of Asphalt Pavement on Vehicle Dynamic Load Based on Numerical Method
- Applied Research on ER Algorithm of Gray Modeling
- Applying Ant Colony System to Solve Construction Time-Cost Tradeoff Problem
- Studies on Adsorption of Tyrosine on Multi-Wall Carbon Nanotubes
- Voltage Control Principle Analysis of Permanent Magnet Generator
- Video Vehicle Tracking Based on Improved Mean-Shift Algorithm
- Efficient Multi-Target Tracking Method Based on Fusion Morphology Filtering in Traffic Video Detection
- Mode I and Mode II Stress Intensity Factors Based on Crack Opening and Sliding Displacements
- Function S-Rough Sets and Image F-Exterior Packet
- Research on Negative-Sequence Electric Current Examination Method
- Analysis for TCSC Steady-State Characteristics
- An Extraction Algorithm for Voice Signal Feature Based on Multifractal Analysis
- Primary Study on the Anatomical Construction and Physical-Mechanical-Properties of Introduced Dalbergia sissoo
- Analysis of the Stress Intensity of Rotor Blade in Hydraulic Retarder