Advanced materials science and technology : selected, peer reviewed papers from the 8th International Forum on Advanced Materials Science and Technology, August 1-4, 2012, Japan /
Saved in:
| Meeting name: | International Forum on Advanced Material Science and Technology (8th : 2012 : Fukuoka City, Japan) |
|---|---|
| Imprint: | Durnten-Zurich : Trans Tech Publications Ltd., [2013] |
| Description: | 1 online resource (xiii, 343 pages .). |
| Language: | English |
| Series: | Materials science forum ; volume 750 Materials science forum ; v. 750. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11208991 |
Table of Contents:
- Synthesis of MAX Phase (Cr,V)2AlC Thin Films
- Study on Preparation Process of Magnetic Abrasive Particles
- Fatigue Fracture of Clay Reinforced Nylon Nanocomposites
- Crack Healing Behavior of SiC Whisker Reinforced Si3N4 Composite
- Effect of Chemical Composition on Fracture Behavior in ZrNiAl Metal Glass
- Effect of Minor Addition Ta on the Thermal Stability and Corrosion Resistance of Ti-Zr-Cu-Pd Bulk Metallic Glasses
- Residual Stress in Oxide on NiCrAlY Coating Evaluated by Photoluminescence Spectroscope
- Preparation of Ni-P-Al2O3 Composite Film on Mild Steel with High Resistance to Corrosion and Wear
- Effects of Minor Si Addition on Glass Formation and Thermal Stability of Ni Free Ti-Based Bulk Metallic Glass
- Influence of Carbon Reinforcements on the Mechanical Properties of Ti Composites via Powder Metallurgy and Hot Extrusion
- Effect of Nanosized Particles on the Mechanical Properties of Y2O3
- Three-Dimensional Characterization of BaZrO3 Precipitates in Y1-xGdxBa2Cu3O7-y Prepared by TFA-MOD Using STEM-Tomography
- Ti-Based Bulk Metallic Glass Composites Produced by Spark Plasma Sintering
- Fabrication of Cu Nanowires and its Effect on Proliferation of Mesenchymal Stem Cells
- Electrochemical Behavior of AZ Magnesium Alloy Containing Rare Earth Element
- Roll-Gap Control System of Twin Roll Strip Caster Based on Feed Forward-Feedback
- Improvement of Catalytic Activity of Atomized Ni3Al Powder for Methanol Decomposition by Surface Chemical Treatments
- Nanoporous Copper Dealloyed from a Nanocrystallized Ticu Alloy
- Combined Experimental and Numerical Approach for Linking Microstructure and Mechanical Properties on Different Length Scales for near #947;-TiAl Alloys
- Development of ZnTe-Based Solar Cells
- Peroxidase and Toluidine Blue-Incorporated DNA Bio-Polyion Complex Film as Biosensing Layer for Hydrogen Peroxide Determination
- Dynamic Strain Ageing in a Twin-Induced Plasticity Steel
- In Situ Synthesis of Alumina Matrix Composites by Spark Plasma Sintering
- Temperature Field Analysis of Directional Solidification of Multi-Crystalline Silicon
- Rheological Model for a Nanoporous-Elasto-Hydrodynamic Composite Material
- Influence of Glass Coating Thickness on Interfacial Heat Transfer Coefficient during Forming of Nickel Based Superalloys
- Shear Strength Evaluation of Laminated Binderless Bamboo Composites
- Effect of Crack Initiation Size on Fatigue Strength in 0.85% Carbon Steel
- Application of Magnetic Field Method for Measuring Lubricant Viscosity
- Fabrication of Photo-Polymerized PCL Tissue Engineering Scaffolds by Dynamic Masking Rapid Prototyping System
- FEM Analysis on Thermoelectric Properties of Metal/TiO2-x Composites with Random Distribution of Metal Powder
- Improvement of Thermoelectric Properties of CuAlO2 by Excess Oxygen Doping in Annealing
- Influence of Intermittent Air Introduction on Formation of Zn Films by Mechanical Coating Technique
- Detection of Delamination in GFRP and CFRP by Microwaves with Focusing Mirror Sensor
- Comparison of Mechanical Properties of a Biomedical #946; Titanium Alloy Added with Pure Rare Earth and Rare Earth Oxides
- Mapping of Phase Distribution in Electron Holography with a Stage-Scanning System
- Modeling and Simulation of Dynamic Recrystallization of GCr15 Steel Using Cellular Automaton Method
- Investigation of Bonding Interface and Strength Properties in Diffusion Bonding of MgAZ31/Al6061
- Analysis of Bonging Temperature and Interfacial Characterization of 3Y-TZP and SUS304 by Diffusion Bonding
- The Effect of H3BO3 Microaddition on Microstructure of Ni/MgO Sintered Compact by Co-Precipitation Method
- A Study on the Rust Removal and Retard on the Surface of the Wear Water Screw-Thread Steel Using Flame Hot Melting
- Microstructure Evolution of AZ31 Magnesium Alloy in Rolling Zone
- Study on the Application of Magnetic Nanoparticles as Drug Delivery Particles on the Atopic Dermatitis
- A Pseudo-Binary Diagram of the (Bi,Pb)-Sr-Ca-Cu-O System
- Synthesis of Spherical Carbon Nanoparticles via Sol-Gel and their Electrochemical Properties in Electrical Double Layer Capacitor
- Effect of Mean Stress on Fatigue Strength of Spheroidal Graphite Cast Iron
- Study on Anisotropic Mechanical Behavior at near Pre-Crack for AZ31B Sheet under Biaxial Stress
- A Study on Spatial Resolution of the Microwave Atomic Force Microscope Imaging Affected by Scanning Speed
- Thermal Residual Stress and Tensile Strength of UACS/Al Laminate with Different Slit Angles
- Effects of Slit Patterns on the Tensile Properties of Unidirectionally Arrayed Chopped Strands Composites
- Effect of Substrate on Crystallization of Sol-Gel-Derived Pb(Zr0.52Ti0.48)O3 Thin Films by Microwave Annealing
- Structure Simulation Calculation of Impurities B with Fe, Al or Ca in Metallurgical Grade Silicon
- Effect of Microwave Irradiation on Rapid Crystallization of Ferroelectric Lead Zirconate Titanate Thin Films
- Preparation of Paver Bricks Having both Water Retainability and Frost Resistance by Designing Macro Porous Structure
- Optimization of Process Parameters for Unidirectional Solidification of Magnesium Alloy
- Notch Effects in High Cycle Fatigue of Ti-6Al-4V
- Investigation for Small Shear-Mode Fatigue Cracks in Bearing Steels
- Purification of Silicon Using the Liquid Phase Migration Technique under Temperature Gradient
- Formation of Nanocrystalline Si by Au-Catalyzed CH3SiH3 Pulse Jet CVD
- Photo-Electrochemical Properties of Titanium Dioxide Thin Films Prepared by Reactive RF Sputtering Method
- Nanopore Formation on SOI(100) by CH3SiH3 Pulse Jet CVD: SiC Growth Temperature Dependence
- Estimation for Fatigue Behavior of Notched Plate with Mean Stress Effect
- Hydrogen-Induced Ductility Loss in Cast Irons
- Effect of Occasional Shear Loading on Fatigue Crack Growth in 7075 Aluminum Alloy
- Effect of Dry-Ice Blasting on the Microstructure and Properties of Plasma-Sprayed CoNiCrAlY Coating
- Morphology and Residual Stress of Ultrathin Al Films Confined by AlN Layers
- A High Sensitivity 3-D Measurement Method of Minute Specimen Based on Microscope and Laser Projection
- Reductive Removal of Phosphorus in Silicon Using CaO-CaF2 Slag
- Critical Current Characteristics and Flux Pinning in Fe-Based Pnictide Superconductor
- Critical Current Density and Flux Pinning Properties in Superconducting MgB2 with and without SiC Doping
- Structure and Electrochemical Properties of DLC/SiC Films on the Surface of Magnesium Alloy by Plasma Immersion Ion Deposition
- The Effect of Working Pressure on the Composition and Optical Properties of TiO2 Films Bombarded by N Ion Beams
- Glass-Forming Ability and Mechanical Properties of Zr-Ni-Al Bulk Metallic Glasses with High Zr Content
- The Effect of Pt Addition on the Structure and Magnetic Properties of Melt-Spun Fe80-xPtxB20 Alloys
- Effect of Withdrawal Rate on Defects of Upgraded Metallurgical Grade (UMG)-Silicon Prepared by Vacuum Directional Solidification
- The Research of Bubble Adsorption to Purify Silicon in the Al-Si System
- A Developing Method to Prepare Micro-Nanopowder by Incorporating Jet Milling and Electrostatic Dispersion
- Effects of Lanthanide Substitution on the Sintering Behavior of Bismuth Titanate Ceramics Prepared by the Chemical Coprecipitation Method
- Development of Silicon Nitride Porous Bodies with Micro-Macro Complex Pore Structure for the Application of the 'Bio-Filter'