Key engineering materials II : selected, peer reviewed papers from the 2012 2nd International Conference on Key Engineering Materials (ICKEM 2012), February 26-28, 2012, Singapore /
Saved in:
Meeting name: | International Conference on Key Engineering Materials (2nd : 2012 : Singapore) |
---|---|
Imprint: | Durnten-Zurich : Trans Tech Publications, ©2012. |
Description: | 1 online resource (1834 pages) : illustrations (some color) |
Language: | English |
Series: | Advanced materials research ; v. 488-489 Advanced materials research ; v. 488-489. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11191272 |
Table of Contents:
- Resistive Polymer Memory Materials Containing Electron Donor and Acceptor Moieties
- Numerical Study on Impact Response of Aircraft Sandwich Wing Made of Fiber-Metal Laminate Face-Sheets Subjected to Bird Strike
- Light Absorption and Structural Properties of TiO2-AgCl Thin Films Doped with Cu by Sol-Gel Process
- Research on the Strength Improvement of 7A04 Aluminum Alloy
- Synthesis and Characterization of SnO2/N-Doped TiO2 Nanoparticles
- Effects of Temperature, Strain Rate and Grain Size on Superplastic Behavior of Magnesium
- Effect of Distributed Attached Mass on the Vibration of Sandwich Panel Using Higher Order ESL Theory
- Effect of Curvature and Thickness of Aluminum Shells on the Energy Absorption in Low Velocity Impact
- Effects of Water as Non-Solvent Additive on Performance of Polysulfone Ultrafiltration Membrane
- Study on Warm and Hot Tensile Deformation Behavior and Flow Stress of AZ31B Magnesium Alloy Sheet
- Reactive Blends of Poly(butylene adipate-co-terephthalate) and Thermoplastic Starch
- Properties of Compatibilized SAN/NR Blends
- Heating Effect on the Qualities of Cr-Zr-N Thin Films by Increasing in Zr Sputtering Current
- Microscopy Observation on Nanocellulose from Kenaf Fibre
- Synthesis and Properties of Sb Layered Te/Cd Stack Prepared by Elemental Stack Method
- Effect of Clay on the Properties of Polyoxymethylene/Clay Nanocomposites
- Investigation on the Deformation Pattern and Energy Absorption Capacity of Hot-Stamping Structures with Partial Pressing Hardening
- Mechanical Properties of Montmorillonite-Filled Natural Rubbers Compatibilized by Epoxidized Natural Rubbers
- Low Temperature Solvolthermally Synthesized Nitrogen-Fluorine Doped TiO2 for Methyl Orange Photodegradation
- Optical Properties of NiO Thin Films: A Potential Material for Optoelectronic Devices
- Physical Properties of PP/Recycled PET Blends Prepared by Pulverization Technique
- Transport Properties of Chitosan/Peo Blend Based Proton Conducting Polymer Electrolyte
- Martensitic Transformation and Response Characteristics in Bias-SMA Spring Actuators with Thermal Cycling
- Inverse Estimation of Viscoelastic Material Properties Based on Particle Swarm Optimization and Neural Network
- Ab Initio Electronic Structure Studies of CuO Multiferroics
- Laboratory Study and Evaluation on a Novel Clearfrac Fluid System
- Effects of End-Groups on Properties of Hyperbranched Polyether
- Curing Behavior Characterization of Phenolic Resin Derived from Starch
- A Study on Ployacryamide Solution Viscosity Analysis at Low Shear Conditions
- Performance Study of Humidity Adsorbent Prepared from Waste Shells
- Degradation of Butylparaben by Ozonation and UV/TiO2 Processes
- Microstructure Evolution during Thermal Aging of Fe-Cu Alloys
- Formation Mechanism of Ceria Particles by Spray Pyrolysis
- The Role of Form Compositions in Energy Consumption of High-Rise Buildings (Case Study: Iran, Tehran)
- Fracture Behaviour of Chemically Treated Reshira-Epoxy Composite and Optimization of Parameters for Composite Fabrication
- Influence of Unground Palm Oil Fuel Ash (UPOFA) in Compressed Earth Brick (CEB) Properties
- Densification Behavior of Steatite by Two Stage Sintering
- Optical Behaviour of Transparent Thin Films of Sr-Doped TiO2 for Optoelectronic Devices
- Evaluation of the Physiochemical Properties of Molybdenum Supported Catalysts
- Polymeric Antioxidant Based on Natural Rubber Grafted with N-(4-Hydroxyphenyl)maleimide
- Synthesis and Characterization of Fluorescent Acrylamide Water Soluble Macromer
- Photocatalytic Degradation of Active Brilliant Red on TiO2/SiO2 Composite Catalysts
- Ferromagnetism, Raman Spectra and Photoluminescence of Sn0.91Co0.05Ce0.04O2 and Sn0.91Fe0.05Ce0.04O2 Nanorods
- Free Vibration Analysis of FGM Sandwich Beams Containing Edge Cracks
- Analysis of Surface Rolling Process Impact on Crankshaft Fatigue Strength
- Effect of the Two-Step Solution Heat Treatment on the Microstructure of Semisolid Cast 7075 Aluminum Alloy
- Effects of Aggregate Gradation on Water Permeability of Concrete
- Influence of Polypropylene Fiber in Strength of Foamed Concrete
- Self-Compacting Concrete Prepared Using Rice Husk Ash Waste from Electric Power Plants
- Research of Ecological Planning of River Landscape Used Ecological Concrete
- Reduction in Defect Rate by Taguchi Method in Plastic Injection Molded Components
- Challenges and the Way Forward for Building Materials Management in Building Adaptation Projects
- Centrifugal Atomization of Zinc Metal Powder for Friction Materials Application
- Compositions and Particle Sizes of (RE)Ba2Cu3O7-X Superconductor Powders Synthesized by the Solution Combustion Technique
- Bulk Crystallization of Ceramic Whiskers from Borate-Based Glass
- Anisotropy and Forming Characteristics of Magnesium Alloy ZE10
- Investigations of Tungsten Based Intermetallic Alloys by Self Propagating High Temperature Synthesis from Metal Oxide Precursors
- Effect of Al Mole Ratio on Iron Aluminide Reinforced with TiB2-Al2O3 Composite by Self-Propagating High-Temperature Synthesis
- Low Temperature Synthesis of Pb(Zr0.52Ti0.48)O3 Ceramic Powders by Chelating Agent Assisted Sol-Gel Process
- Effect of Grain Size on the Shape Recovery in a Melt-Spun Fe-24%Mn-4%Si-5%Cr-5%Co SMA Ribbon
- Effect of Filling Powder Volume Rate in Wick Manufactured for Loop Heat Pipes
- Effect of Pre/Post Heat Treatment on the Friction Stir Welded SSM 356 Aluminum Alloys
- Effect of MgO Additive on Microstructure of Al2O3
- The Properties of Water Hydraulic High-Speed On/Off Valve Ceramic-Based
- Metallurgical Studies on the Friction Stir Welding of Dissimilar A356 and A413 Alloys
- Effect of Part Size on Surface Heat Flux during Immersion Quenching
- Prediction of Failure in Thin-Walled Hemispherical GRP Dome Subjected to Static Internal Pressure Based on a Failure Factor
- Effect of Ply Thickness on Displacements and Stresses in Laminated GFRP Cylinder Subjected to Radial Load
- Preliminary Study on Cutting Solid Object Using Water at Pressure Exceeding 1000 MPa
- Synthesis, Characterization and Investigation of the Third Order Nonlinear Optical Properties of Pyrrole Schiff Bases
- Some New Results for the Study of Acoustic Radiation within a Uniform Subsonic Flow Using Boundary Integral Method
- Investigating the Effects of Powder Mixed Electrical Discharge Machining on the Surface Quality of #947;-TiAl Intermetallic
- Surface Cleaning of 4H-SiC Using Hydrogen Plasma
- Supply Chain Risk Prioritization Using a Hybrid MCDM Approach
- A Model for IT/IS Project Portfolio Selection in the Presence of Uncertainty: Combination of Fuzzy Multi-Criteria Decision Making and Fuzzy Mathematical Programming
- A Node Mobile Handoff Model Based on Resource Allocation in Wireless Mobile Networks
- Coating Life Assessment: The Use of Adhesion Strength in Parametric Development in Coating Degradation Evaluation
- Effect of N2 Flow Rate on Structure and Morphology of (Ti,Cr)N Thin Films Deposited by Unbalanced Magnetron Co-Sputtering
- Thermal Oxidation of NiAl-Al2O3 Coated on Mild Carbon Steel
- Optimization of Rare Earth Dope on MAl2O4 (M = Ba, Sr) by Self-Propagating High Temperature Synthesis
- Effect of Substrate Conditions on Fe-Al2O3 Composite Coating
- Compositional and Deposition Rate Dependence upon RF Substrate Bias of RF Sputtered Ni-Fe Films
- Effect of Tool Wear on Tri-Phase CVD Coated Carbide Tools Life while Turning Al6061
- Tool Wear Performance of TiAlN/AlCrN Multilayer Coated Carbide Tool in Machining of AISI D2 Hardened Steel
- Effect of CaF2 in Precursors on Steel Pipe Lined Fe-Al Intermetallic-TiB2-Al2O3 Composite Coating by Centrifugal-SHS Process
- Effects of Phthalocyanine Blue and Ultramarine Blue Pigments on Nucleation of Polypropylene
- Effect of Latex Treatment on Properties of WNRL/PS Blends
- Application of Fiberglass-Polyester Paving Mat in Engineering
- Synthesis of Composite Materials from Natural Precursors by Self-Propagating High Temperature Synthesis Process
- Effect of Wood Flour Content and Cooling Rate on Properties of Rubberwood Flour/Recycled Polypropylene Composites
- Low Velocity Impact Resistance of Hybrid Woven Glass Fiber-Carbon Fiber/Vinyl Ester Composite Laminates
- Preparation and Characterization of Blended Composite Membranes
- Natural Dyeing of Wood Fibers for Green Biocomposites
- Fabrication and Characterization of Porous Zirconia/Alumina Composites
- Surface Modified CaCO3 Nanoparticles with Silica via Sol-Gel Process Using in Poly(lactic acid) Nanocomposite
- Failure Analysis of Carbon Fiber Reinforced Polymer (CFRP) Bridge Using Composite Material Failure Theories
- Effect of Volumetric Fiber Fraction on Failure Strength of Thin-Walled GFRP Composite Cylindrical Shell Externally Pressurized
- Building Factor of Grain-Oriented Silicon Iron (3% SiFe) with Different Thickness on 100kVA Three Phase Distribution Transformer Core
- Mechanical Behavior of GFRP Laminated Composite Pipe Subjected to Uniform Radial Patch Load
- Nonlinear Mechanical Analysis of Polymer Precast Panel for Temporary Support of Tunnels
- Mode I Interlaminar Fracture Characterization of CFRP Composite Laminates
- Polyaniline-Stannous Oxide Composites: Novel Material for Broadband EMI Shielding
- Tensile Properties of Clay/Polypropylene Nanocomposites at Cryogenic Temperature
- Mechanical Characterization of Nanoclay Reinforced Polypropylene Composites at High Temperature Subjected to Tensile Loads
- The Effect of Molar Ratio of TiO2/WO3 Nanocomposites on Visible Light Prepared by Hydrothermal Method
- Application of VAM to Manufacturing Scheduling Problems
- Dielectric Studies of Proton Conducting Polymer Electrolyte Based on Chitosan/PEO Blend Doped with NH4NO3
- Study on Thermal Stability of Nano-Silica Thermal Insulating Composites
- Comparative Study for the Dissolution of Bone Ash-Derived and Artificial Hydroxyapatite
- Effect of Flame Retardant on Combustion and Mechanical Properties of Bamboo-Fiber Based Composites
- Effects of Calcination Temperature on Electrospun Silica Fibers
- Effect of Silica Sources on Synthesis of Alumina-Mullite-Silicon Carbide Composite
- Effects of Carbon Nanotube on Tensile and Dynamic Mechanical Properties of NR/SBR and NR/XSBR Nanocomposites Prepared by Latex Compounding
- High Performance Fiber Composites with Enhanced Energy Absorption for Underground Construction
- Effects of Long Chain Cellulose Ester on Mechanical Properties of Polylactic Acid Reinforced with Microcrystalline Cellulose
- Optical Characterization of Luminescence Polymer Blends Using Tauc/Davis-Mott Model
- Mechanical Properties and Morphology of Plasticized Poly(vinyl chloride) Nanocomposites Filled with Nanosilica
- Effects of Fiber Surface Treatment on Mechanical and Thermal Properties of Coir-MCC/Polylactic Acid Composites
- Composites of Polypropylene/Pottery Stone/Magnesium Oxysulfate
- The Chemical Modification of Waste PET and its Application for a Wood-Polymer Composite Binder
- Evaluation of Damping for Glass Fiber Reinforced Composite Materials
- Effect of Electromagnetic Vibration on the Rheological Properties of HDPE/UHMWPE Blends and the Properties of the Blown Films
- Synthesis and Antifungal Studies on CuO Nanostructures
- Properties and Nonisothermal Crystallization Behavior of Nucleated Polylactide Biodegradable Composite Films
- Eigen Value Analysis of Glass Fiber Reinforced Composite Plate
- Novel Technique of Polymer Composite Preparation for Bone Implants
- Analysis of Laminate Configuration on Impact Properties of Glass Fibre Epoxy Nanocomposites
- Thermoplastic Elastomer Nanocomposites of Polypropylene/Ethylene Octene Copolymer/Carbon Nanotubes
- Utilization of Microcrystalline Cellulose Prepared from Cotton Waste as Reinforcement in Polypropylene Composites
- Tensile Properties and Morphology of Natural Rubber-Kaolinite Organoclay Composites
- Fuzzy Control Scheme for Transportation of Ultra-Thin Flexible Substrates with Variable-Section
- Study on Machinability Behaviour of Carbon Fibre Reinforced Plastics (CFRP) Using PCD 1500 Grade Insert
- Mechanical Behaviour of Chemically Treated Reshira-Epoxy Composite at Cryogenic Temperatures
- Tool Wear of Polycrystalline Cubic Boron Nitride Compact Tools in Cutting Hardened Steel
- Particle Swarm Optimization Algorithm with Random Perturbation around Convergence Center
- Compression Behavior of Adhesive Butt Joints of Aluminum Hexagonal Core Sandwich Panels with Different Edging Configurations
- Properties of Ag Doped CdTe Thin Film Prepared by Stacked Elemental Layer (SEL) Method
- Silica Preform Neck-Down Shape and Glass Fiber Drawing in Optical Fiber Manufacturing Process
- Numerical Analysis on Superplastic Forming of Friction Stir Welded AA6061-T6 Alloy Sheet
- Flexible Polyurethane Foams Filled with Coconut Coir Fibres and Recycled Tyre - Part I: Production and Morphology
- Flexible Polyurethane Foams Filled with Coconut Coir Fibres and Recycled Tyre - Part II: Compression and Energy Absorption
- Synthesis of Al-Fly Ash Composites by Modified Two Step Stir Casting Method
- The Industry Management System Based on Virtualization and Cloud Computing
- Optimizing Layout and Amount of Eco-Industrial Demonstration Parks in Jilin Province, China
- Research on Opportunistic Beamforming Technology in Sparse Network
- The Effects of Injection Moulding Processing Parameters and Mould Gate Size towards Weld Line Strength
- Body Armor Technology: A Review of Materials, Construction Techniques and Enhancement of Ballistic Energy Absorption
- Computer Program in Visual Basic Language for Manufacture of Helical Cutting Tools
- Tool Inclination Angle Change Rate Control in Five-Axis Flat-End Milling
- Shear Mechanical Properties Characterization of Material via Ultrasound Vibrometry
- Investigation of Correlation between Polishing Characteristic and Pad Roughness during Chemical Mechanical Planarization Process
- Influence of Machining Strategies on Surface Roughness in Ball End Milling of Inclined Surfaces
- Effect of Sample Geometry and Placement on Iron Ore Processing by Microwave
- The Study of Proper Conditions in Face Milling Palmyra Palm Wood and Coconut Wood Using Design of Experiment
- Modeling and Optimization of EDM of Al 7075/10wt% Al2O3 Metal Matrix Composites by Response Surface Method
- The Effect of Microstructural Changes Induced by Annealing on Mechanical Properties of FeCoCrMoCBY Bulk Glassy Alloy
- An Approach of Weighted Principal Component Analysis Based Taguchi Method for Parametric Optimization of Submerged Arc Welding
- Mathematical Modeling of Machining Parameters in Electrical Discharge Machining with Cu-B4C Composite Electrode
- Effect of Process Parameters in Electric Discharge Machining of Ti-6Al-4V Alloy by Three Different Tool Electrode Materials
- A Study on Design of Communication Protocol for CPS Simulation
- The Application of the Combinatorial and Optimal Networks on the Prediction of the Consumer Price Index
- XML Representation of System Entity Structure for Distributed Modeling Simulation
- A Study of Resource-Constrained Project Optimization with Discounted Weighted Earliness-Tardiness Penalty Costs
- Edge Tracing Based on Improved Genetic Algorithm
- Effect of Addition of Nano Silica on Modulus of an Acrylic/Melamine Automotive Topcoat
- Effect of Nano-Silica Loading on Barrier and Mechanical Properties of Food Packaging Based LLDPE Film
- Kinetics of Thermal Degradation of Ionic Liquid Regenerated Cellulose
- Comparative Study of Platinum/Single Wall Carbon Nanotube versus Platinum/Carbon Black Coating
- Monoaromatic Pollutant Removal by Carbon Nanotubes from Aqueous Solution
- Microwave Assisted Ultra Fast Synthesis of 1-D Molybdenum Oxide Nanocrystals: Structural and Electrical Studies
- Ultrafine Wollastonite Reinforced Polypropylene/Ethylene Propylene Diene Rubber Thermoplastic Elastomers
- Synthesis of Polyaniline by Pulsed Plasma Polymerization Using Theta-Pinch Device
- Mechano-Chemical Synthesis of TiB2-Al2O3 Nano-Composite by Reaction between TiO2, B2O3 and Al
- Surface Modification of Aluminum Alloy Using Plasma Based Ion Implantation and Deposition
- Hydration Dehydration Effect on Morphology and Basic Strength of Nano-Calcium Oxide
- Strategies and Suggestions to Utilize Biomass Energy in Rural Areas of Chongqing
- Synthesis of Rice Straw Cellulose Ester for Use as Biodegradable Plastic Film
- Development of Bio-Rapid Prototyping System for Fabricating Bone Scaffold Using Thermal-Sensitive Biopolymer
- Influence of the TMJ Implant Geometry on Stress Distribution
- Design Analysis of TMJ Implant under Physiological Loading Condition
- Manufacturing of Flexible Surgical Guide for Fully Edentulous Patients
- Analysis of the Evolution and Structure of Systems Biology
- EMG Detection System and Design
- Physical, Mechanical, and Thermal Properties of Sisal Cellulose Biocomposite Films
- Bio-Modelling Using Rapid Prototyping by Fused Deposition
- ZMP Based Gait Generation of AIT Leg Exoskeleton-A Further Gaits Generation
- Using Modeling and Simulation in the Manufacturing of Medical Devices
- SCOR Based Food Supply Chain's Sustainable Performance Evaluation Model
- A Cheap Synthetic Route to Commercial Ruthenium N3 Dye for Sensitizing Solar Cell Applications
- Experimental Study on Performance of Vertical Axis Wind Turbine with NACA 4-Digital Series of Blades
- Exploration on Infiltrating the Sense of Green Chemistry in University Teaching of Organic Chemistry
- The Used of Pineapple Leaf Fiber, Banana Stem and Kenaf for Production of Paper
- Sand Soil Properties as the Sea Embankment Material Used in Pipe-Bag Riding Method
- GMS Numerical Simulation of Crude Oil Pollution Caused by Some Oil Pipeline Leak
- Environmental Performance as Key Performance Indicators in the Lean Six-Sigma Methodology
- Hypothesis of Rolling Bearing Performance Evolvement
- A QoS Evaluation Model in the Environment of Cloud Computing
- STS Forebody Material Selection Method Using Integrated Aerothermodynamic Optimization Approach
- An Improved Immune Algorithm for Manufacturing Scheduling
- Optimization Techniques for No-Wait Manufacturing Scheduling: A Review
- Integration of Simulation Modeling and Comparison of Scheduling Methods to Minimize the Makespan in a Printing Industry
- Effect of Selected Priority Rules on Manufacturing Objectives in Scheduling
- Determining Production Schedule with Resource Constraints Using Drum-Buffer-Rope (DBR) Approach
- Reducing Setup Time in Manufacturing Cells in a JIT Environment
- Investigation of Critical Issues in a Micro and Small Scale Industries in India
- Some Aspects of Lean Manufacturing
- Six Sigma DMAIC Methodology: A Powerful Tool for Improving Business Operations
- Analysis of Reverse Logistics Operation Mode for Home Appliance Manufacturing Enterprises
- A Two Level DEA in Project Based Organizations
- Trust Management for One-Hop Cluster-Based Underwater Wireless Sensor Networks
- Quality Improvements by Implementing Lean Manufacturing Principles
- Flow Mechanism of a Novel Active Micro-Rotor Mixer
- The Research of the Relationship of Cement Slurry Performance Development and Net Early Microscopic Structure
- 3-D Modeling & Numerical Simulation of Friction Stir Welding Process
- Process Parametric Optimization of Submerged Arc Welding by Using Utility Based Taguchi Concept
- Methodology for the Objectification of Decisions in the Product Development
- A Size-Bed Wheelchair Design Manufacture with Scaled Prototype and Kinematic-Virtual Reality Model Simulation
- Wind Tunnel Analysis on Performance of H-Rotor VAWTs with NACA 64xx Blades
- Numerical Simulation Applied to Study the Effects of Fractal Tree-Liked Network Channel Designs on PEMFC Performance
- Hyperspectral Blind Unmixing and Multiple Target Detection Using Linear Mixture Model
- Gel Oxidation of Titanium and Effect of UV Irradiation on Precipitation of Hydroxyapatite from Simulated Body Fluid
- Numerical Simulation on Static Performance of Savonius Rotor Based on Different Turbulence Models
- Research of Legislation and Practice for Piercing the Corporate Veil under New Companies Act in China
- Comparison of Fractional Model and Two Part Model for the Mortgage Risk Behaviours of Prepayment Assessment
- Derailment Analysis of Tilting Railway Vehicles with Wind Loads
- The Use of Uniform Design and Nelder-Mead Simplex Methods to Optimization of Suspension Parameters of a High Speed Railway Vehicle System
- Estimating and Modeling Uncertainties Affecting Production Throughput Using ARIMA-Multiple Linear Regression
- Energy Harvesting by Foot-Propelled Battery Charger Using Shoe-Model
- Streaming Media Technology in the Fire Communication
- Forecasting of Palm Oil Fruit Delivery Quantities Using the Trend Adjusted Exponential Smoothing: A Case Study
- Numerical and Experimental Studies of Residual Stresses in Cold Expanded Holes
- Research on Emergency Plan Ontology Model
- Improved Hybrid Taboo Search with its Application in Computer-Aided Optimization Problem
- Description and Test of the HFFT Resonant Frequency's Dynamic Characteristics
- The Analysis of Management Mechanism Innovation Research of China Art Museum in New Time
- Study on Network Convergence Based on IMS Architecture
- Design of Network Learning Platform Based on Cloud-Computation
- Study on Physical Education Model Construct
- CCD Image Geometrical Distortion Correct and Large Touch Screen
- Emotion Speech Recognition under Sadness Conditions
- A Simulated Annealing with Ranking and Selection for Stochastic Optimization
- Optimization Study on Preparation of Macroporous Silicon on P-Type Silicon Substrate by Electrochemical Etching
- Optimization of Anodic Layer and Fabrication of Organic Light Emitting Diode
- MFC + GE + GPS-Based Old and Valuable Trees Management Information System Design and Research
- Short Review: Electrophoretic Deposition (EPD) on Non-Conductive Substrate
- Thermal Transient Measurements on High Power LEDs with Different MCPCB Substrate
- Comparison on the Thermo-Optical Performance of LEDs with MCPCB and FR4PCB under Various Drive Currents and Ambient Temperatures
- Effect of Nickel Doping on Interfacial Reaction between Lead-Free Solder and Ni-P Substrate
- Analysis on the Efficient Limiting Factors of N-Type Rear Junction Solar Cells by PC1D Simulation
- Influence of the Increasing Drive Currents and Ambient Temperatures on the Performance of Different Chip Technology LEDs
- Response of Modified Poly(lactic acid) to Microwave Radiation
- A Review of Photo Sensor Laser Range Finder Hokuyo URG-04LX-UG01 Applications
- Characterization of Chitin Extracted from Waste Sources via XRD, FTIR, and TGA Techniques
- Preparation of Colloidal Silver Nanoparticles by Laser Ablation; Evaluation and Study on its Developed Applications
- Investigation on the Effect of Process Parameters on Hardness of Components Produced by Direct Metal Laser Sintering (DMLS)
- Study on the Effect of Process Parameters on Sliding Wear Behavior of Components Produced by Selective Laser Sintering (SLS)
- Study on the Effect of Process Parameters on Reciprocating Wear Behavior of Components Produced by Selective Laser Sintering (SLS)
- Underground Sensor Interaction Technique Based on DSP
- Acoustic Radiation of Axisymmetric Thin Bodies by Integral Variational Method
- Numerical Simulation of Ultrasonic Generator in Dust Removing System
- Design and Fabrication of a Micro-Actuator Based on Electromagnetic Membrane Device
- Distribution Network Redesign: A Case Study of the Beverage Manufacturing Company in Thailand
- Knowledge Discovery in Plastic Cards Transactions by Using Data Mining
- Positioning Method for Underwater Target by Sea-Surface Wireless Sensor Networks
- Research on Hardware Security of Embedded System in Cloud Environment
- Research on Predictable Approach to Land Subsidence Based on TIN Model
- Total Quality Management for the Audiovisual Broadcasting Systems
- Effect of Joining Process on the Coatings of Self-Piercing Rivets
- Derivation of Equations and the Heat Distribution Graphs in Vibration Assisted Machining and Comparison with the Conventional Machining
- Preparation and Properties of Urethane Oil from Jatropha Oil
- Study of Photocatalytic Activity of TiO2 Nanotube Derived from Different Anodized Parameters
- Preparation of LLDPE/Modified Silica Nanoparticle with Triethoxyvinylsilane Film for Microwaveable Packaging
- p-HEMA Membrane Fabrication Applying Nanogold for Biochemical Sensor
- Optimization of Synthesis of Carbon Nanotubes Using Chemical Vapor Deposition Method
- Doped Zinc-Organic Framework for Sensing of Pesticide
- Luminous Exposures and Light-Fastness Survey in Daylit Historical Museum Galleries under Tropical Sky Conditions
- Electrical Resistivity Based Non-Destructive Testing Method for Determination of Soil's Strength Properties
- Utilization of Mass and Elastic Loading in Oxide Materials Based SAW Devices for the Detection of Mustard Gas Simulant
- A Study on Road Planning in the Process of Socialist Countryside Construction
- Rapid Determination of Fumonisin B1 in Food Samples by a Clean-Up Tandem Immunoassay Column
- Offline Data Sharing Model Based on Encrypted XML Files
- Lead Price Forecasting Based on ARIMA Model
- Efficient Domain Search for Fractal Image Compression Using Feature Extraction Technique
- Study on the Spectral Data Processing Method Based on the Transfer Function
- Problems and Countermeasures of the Development of English Majors in Provincial Higher Institutions in China
- The Security Experience of Wireless Local Area Network at Ningbo University
- The Urban Appraisal Research of the Chain Enterprises on the Basic of the AHP Theory
- Determination of Leagile Supply Chain Index Using Fuzzy ANP Approach
- A Combined Method for Concentric Circles Detection in Image of O-Shape Rubber Ring
- Inspection Manpower Planning for X & S Control Charts
- Machinery Fault Detection Using the Wavelet Order Spectrum
- Automated Precipitate Identification for Sludge Volume Indicator
- Image Surveillance System in the Unattended Substation Based on Harris Corner Detection
- Steady State Response Simulation of a 2-D Micromirror in Simulink
- The Necessity of Implementation of Operations Research for Managers for Decision-Making and Productivity Increase in Production
- An Empirical Examination of Fit between Supply Chain Integration and Environmental Uncertainty
- Design and Implementation of 1-Wire Bus Slave Device Based on MSP430 MCU
- On the 3-Dimensional Channel Capacity Formula and MIMO Theory
- Foliar Image Color Features for Rubber Nitrogen Deficiency Status Analysis
- ACO-Based Global Optimal Transportation Path
- Research on Information Security Model
- Calculation of Coupled Modes for Vibro-Acoustic Problems
- The Study of Numerical Control Algorithm and Hardware
- Computation of Availability and Performance of Wind Turbine with Markov Analysis in India
- Comparison of Heuristics for Identical Parallel Machine Scheduling
- A Weighted Fracturing Fluid System for Deep Well Stimulation Treatment
- Design of Wireless Heat Automatic Reading Meter Monitoring System
- Research on the Smart Home System Based on IOT
- Semantic Tags and Neutral Network Based Personalized Advertisement Recommendation System for Movies
- Design of a Multi-Locomotion Underwater Robot
- Dilution Control by Advanced Submerged Arc Welding
- The Research of Lighting Control System Based on NRF24L01 Wireless Network
- Optimal Path Planning of an Autonomous Mobile Robot Using Genetic Algorithm
- Design of Tactile Sensor for Measuring Orthocenter Deviation and Friction in Wafer Transmission Process
- Theoretical and Experimental Researches Regarding the Performances of a New Type of Rotating Machine with Profiled Rotors
- Investigation for Spool Sluggishness and Jamming of Hydraulic Proportional Remote Control Valve
- A New Model Reference Adaptive Control Using Stacked Identifiers
- Online Trajectory Generation of a 2 Link Robot in Presence of Obstacle
- Application of Taguchi Optimization Method in Active Vibration Control of a Smart Beam
- Application of Wavelet Thresholding Filter to Improve Multi-Step Ahead Prediction Model for Hydraulic System
- Fuel Cost Optimization of Power Systems Inclouding HVDC Line
- Fuzzy Adaptive Output Tracking Controller for a Class of Chaotic Systems
- Observer-Based State Tracking Adaptive Controller for a Class of Non-Affine Nonlinear Systems: An Intelligent Approach
- Maneuver Control and Vibration Suppression of a Smart Flexible Satellite Using Robust Passivity Based Control
- Design and Analysis of Front Axle for Two Wheel Drive Tractor
- Analysing Reliability Aspects of HVAC Systems - A Case
- Kalman Filter-Based Sensor Fusion for Improving Localization of AGV
- Dynamic Analysis and Experiment Research of the Two-Mass Feeder
- Intelligent Traffic Flow Parameters Acquisition System Base on GPS