Materials and computational mechanics : selected, peer-reviewed papers from the International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011), November 18-20, 2011, Shenzen, China /
Saved in:
Table of Contents:
- Research on Control Effectiveness of Semi-Active MR-TMD to some Coal Gas Manufacturing Plant
- Direct Tensile Strength Measurement of Concrete
- Dynamic Simulation and Test for the Valve Train Dynamics
- Occluded Object Tracking Based on Mean Shift and Accumulation Error Suppression
- Studies on Stability of Peanut Mango Milk
- Application Study of Wa Nationality Totem Symbol of Lincang in Modern Furniture Design
- Rolling Element Defect Diagnosis Based on Local Mean Decomposition
- Study on the FCG Prediction Model Based on Material's LCF Damage
- Study on Composite Model for Vibro-Replacement Stone Column Foundation by Finite Element Method
- The Application of Interval Analysis Method in the Stability Analysis
- Stress Distribution Rule of Reinforced Concrete Specimen under Uniaxial Tension
- Analysis on Long-Span Bridge Seismic Response in Multi-Dimensional and Multi-Point Mode
- Experimental Study on Impact Compression and Spliting of Granite
- Research on Lower Muscle Strength Feature for Elite Speed Skaters in High Speed Gliding
- Effect of the Stress Balance on Determination of Rock Dynamic Fracture Toughness Using Holed-Cracked Flattened Brazilian Disc
- Preparation of Ni-Coated SiC Ceramic Composite Powder by Electroless Plating
- Corrosion Behavior of Electroless Deposited Fe-Zn Coating
- Study on the Vibro-Acoustic Characteristics of a Vibration Isolation Mass Structure with Composite Braces
- New Results of Buckling and Postbuckling Behaviors for Fiber-Reinforced Composite Shear Deformable Anisotropic Laminated Cylindrical Shell Subjected to Torsion
- Simulation Analysis of the Tensile Process on Sheet Sample
- Calculation and Analysis of 2-D Thermal Stress Field in Induction Motor with Compound Cage Rotor under Different Load
- The Sharp Indentation for Identifying Constitutive Relationship of Metallic Materials
- Evaluation of the Steep Slope Stability Based on Theory of GPS Monitoring Analysis
- Difference and Application of Matrix Displacement Method and Finite Element Method in the Truss Structure Analysis
- Mechanism of Work Hardening of Mn13 after Asynchronous Cold Rolling
- Recent Developments of Material Deformation Measurement
- Detection for the Automatic Transmission of the Tractor Based on Spectroscopic Technology
- Edge Drop Constituent Analysis of Cold Rolled Strip
- The Existence of Positive Periodic Solution for a Class of Functional Differential Equation with Multi-Delays
- Research on Influence of Flexible Parts' Rigidity to Passenger Car Exhaust System's Modal
- Design and Finite Element Analysis in Hydraulic Retarder Bracket Based on ANSYS
- Study on Stability of High Embankments under Complicated Stress Conditions
- Kinematical Analysis on the Technology of Overhead Smash between Badminton and Tennis
- Studies on MAaximum Hydrostatic Testing Pressure for New Pipeline
- Noether Symmetry and First Integral of Discrete Nonconservative and Nonholonimic Hamiltoinian System
- Response Analysis on Asymmetric Twin Tower Building with Large Bases Subjected to Seismic Action
- One Numerical Simulation Method and its Applications for Fatigue Crack Growth
- Carbonation of High Strength Concrete
- Numerical Simulation of Cu-Cu Interface Thermal Resistance by Utilizing Laser Photothermal Method
- Seismic Control Research of Longitudinal Floating Bridge Based on MR Damper
- Model Test Research of the Influences of Rock-Fall Impaction on Accelerations of the Cut-and-Cover Tunnel Structure
- Structure Design and Finite Element Analysis of Airborne Equipment Integrated Mounting Shelf
- Microstructure and Mechanical Properties of a Rapid Directionally Solidified Ti47Al Alloy
- An Impact Analysis of Turbine Guide Bearing Stiffness on Rotating Parts' Transverse Vibration Characteristics
- Dynamic Responses of a Simply Supported Bridge to Moving Vehicle Loads
- Research on Technological Parameters of Laser Cladding
- Study on Flow-Induced Vibration Characteristics of Hydraulic Hoist of Large-Span Upwelling Radial Steel Gate
- Dynamic Analysis of Axially Loaded Beams under Arbitrary Transverse Force
- Mechanics of Hairspring in Mehanical Watch Movement
- Effects of Process Conditions on Mechanics Properties of Micro-Foaming PP/GF Composites
- Structural Fatigue Analysis on Expansion Joints of Diversion Penstock of Hydropower Station
- Study on Properties of Al2O3 -CaO-CaF2 Slag System
- A Novel Simplified and High-Precision Inverse Dynamics Model for Magneto-Rheological Damper
- Kinetic Analysis of Hydraulic Mount of Vehicular Engine Based on Fluid-Structure Interaction
- Finite Element Analysis of Ice-Cone Interaction
- Nonlinear Seismic Analysis of Masonry Infilled RC Frame Structures
- Stability of a Supported Cylinder in Axial Flow
- The Numerical Study of Concrete Mesostructures' Effect on Ballistic Responses in Penetration Problems
- Study on Model of Thermal Crown of Single-Stand Irreversible Foil Mill
- Control Final Cooling Temperature on High Strength of the Pipeline Radio Yield Influence
- Structure and Property of ZnO Content with Tb3+ Doped Zinc Aluminum Phosphate Glass
- Study on in-Plane Bending Vibration of a Combined Ring-Beam
- The FOPS Design of Wheel Loader Cabin Based on Topology Optimization
- An Investigation into the Earthquake Reaponses of Special-Shaped Arch Bridges
- Sol-Gel Derived Titania/Hydroxyapatite Layer on Titanium Substrate
- Temperature Distribution and Operating Efficiency in Rectangular Cold Crucible Directional Solidifying Ti46Al0.5W0.5Si Alloys
- Aero-Elastic Active Control Modeling via Improved POD Method
- The Noise-Induced Chaotic Transition in a Vibro-Impact Oscillator
- Study on Useful Concrete Elastic-Plastic Constitutive Model
- Numerical Simulation of the Reverse Plugging of a Thin Plate Irradiated by Long Pulsed Laser
- Effects of Rare Earth La on Microstructures, Mechanical Properties and Sliding Wear Behavior of High-Aluminium Zinc Foundry Alloy ZA30
- Research about Numerical Integration Method for Structural Dynamic Response in Real Time on-Line Test
- Response of Two-Disk Rotor with Squeeze Film Dampers and its Variation with Parameters
- Experimental Study on CFRP-Bonded Steel Plates with Thickness Reduction Using Underwater Epoxy
- Research on Interface Structure and Fracture Mechanism of Diffusion Bonding of Titanium Alloy/Cu/Stainless Steel
- Comprehensive Recycling of Construction Waste
- Dynamics Analysis of the Bar-Type Piezoelectric Motor Stator
- Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-Scale by Nanoindenter
- Grain Growth Behaviors of Multicrystalline Silicon during Cold Crucible Continuous Casting
- Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 Steel
- Reinforcement Phase of Situ TiC with the Laser Surface Alloying on Steel C1045
- The Performance and Strength Mechanism of Stabilized Aggregate Containing Special Cement with Desulfurization Residue
- The Continuity and Inheriting of Historical Context of Architecture during Urban Renewal in Chongqing
- Static Stress and Modal Analysis of the Impeller of the High-Pressure Low-Flow Pump
- Rate-Dependent Behavior and Constitutive Model of Polycarbonate at Strain Rate from 10-5 to 103 S-1
- Three Dimensional Cosserat Continuum Model and its Application to Analysis for the Cantilever Beam
- Seepage Analysis for Dashiban Landslide Applied Multi-Day Rainstorm once in Hundred Years
- Analysis of Fuzzy Stress and Strength Reliability of Double-Layer Pressure Vessel
- Elastic Waves of Anisotropic Saturated Porous Solids with Thermal Effect
- Green Quasifunction Method for Bending Problem of Clamped Orthotropic Thin Plates with Trapezoidal Boundary Shape
- The Dimensionless Load Separation Method Used for Fracture Toughness Test and its Application
- Chemical Solidification Stress Calculation and Experiment of Concrete-Filled Steel Tube
- Three-Dimensional Viscoelastic Interactions of a Center of Dilatation with a Penny-Shaped Interfacial Crack
- Crack Propagation of Jointed Rock and Application
- Investigation on Spb Method Based on Nondimensional Load Separation Principle for SEB and CT Specimens
- Scalability Study on Large-Scale Parallel Finite Element Computing in PANDA Frame
- A Yield Criterion for Pressure-Sensitive Materials
- Research on Parametric Design Platform of Gear Based on Pro/E
- Analysis of Multiaxial Low Cycle Fatigue Life for Single Crystal Ni-Based Superalloy Based on Two-Phase Unit Cell Model
- The Reliability Analysis of Leaf Spring Based on PDS
- Effect of Ultrasound Treatment on Properties of Soy Proteins Film
- Design of the Microfluidic Chip of Oil Detection
- The Mechanical Analysis of Tubing in Deep Gas Wells in Volcanic Reservoirs
- The Application of Dynamic Compaction Techniques Combining Plastic Drainage Plate to Improve Soft Soil Foundations in a College
- Numerical Simulation of the Collapse of Stepped Circular Tube Subjected to Oblique Load
- Fuzzy Comprehensive Evaluation of Cutting Parameters when Milling Plane Features of Aeroengine Structure Parts
- Study on the Force of Flexible Vacuum Cup Fixture for Aircraft Skin Trimming
- Large Deformations of Low Density Open-Cell Elastomeric Foams: Kelvin Model Study
- The Brief Introduction of High-Speed Trimaran Planing Hull and the Preliminary Study of the Longitudinal Stability
- Dynamics Optimization for the Valve Train of a Diesel Engine
- Simplified Second Order Model of Reynolds Equation for Simulating the Ultra-Thin Air Bearing Film in Hard Disk Drivers
- Heat Transfer Enhancement of Viscoelastic Fluid in the Rectangle Microchannel with Constant Heat Fluxes
- Modification of Flow Stress Model Based on Internal Variables
- Instability of Slip Flow between Two Concentric Cylinders
- Experiment of Temperature Field for High Speed Orthogonal Turning
- The Hydrodynamic Performance Prediction of Ship Hull with Propeller
- Research on of Litterfall Production of Eucalyptus Globulus Plantation
- Microstructure and Temperature Stability of Ca Substituted Forsterite Ceramics
- The Effects of Flexible Deformation on an Oscillating Airfoil at Low Reynolds Number
- Analysis and Improvement of Mobile Payment Security Based on SET Protocol
- The Application of MATLAB in Computational Fluid Dynamic Visualization Processing
- Two Dimensional Acoustic Manipulation in Microfluidic Channels
- Cutting Force Impact to Tool Life of CT5015 in High Speed Machining by Applying Negative Rake Angles
- Three-Dimensional Finite Element Analysis Shelves
- Influence of Tip Injection and Film Cooling for Blade Tip Flow and Heat Transfer
- Hydraulic Model and Numerical Simulation Study of Shuangwangcheng Pump Station
- A Novel Method to Fabricate Silver Chloride Films
- Study of Pre-Tightening Force on Piezoelectric Multi-Dimensional Force Sensor's Measurement Performance
- Application of the Off-Line Simulation System of the Ship Maneuvering in Transition Section Navigation Research of the Continuous Bend
- Effect of bct-5 Si on the Indentation of Monocrystalline Silicon
- Numerical Simulation of Two High Speed Trains Passing by each other in a Long Tunnel
- Generalized Reynolds-Orr Energy Equation with Wall Slip
- Organophilic Modification and Application of Nano-Fumed Silica in Pervaporation of Ethanol / Water Mixture
- Vibrational and Stochastic Resonance in FitzHugh-Nagumo Neural Model with Time-Delay and Colored Additive Noise
- Safety Assessment of Bridge Structures under the Random Dense Vehicle Loads
- Dynamic Analysis of Response of Cofferdam with Steel Sheet Piles Induced by Earthquake Excitation
- Biomechanical Comparison of Different Pedicle Screw Fixations for Thoracolumbar Burst Fractures Using Finite Element Method
- Stochastic Resonance in a Time-Delayed Logistic Growth Model Driven by Periodic Signal and White Noise
- Analysis of Discharge of Transmission Line in Sandstorm
- The Comparative Study on Lower Limb Muscles between International and National Master Skating Athletes
- Fish Sound Frequency Domain Analysis and Acoustic Spread Distance Experiment Research
- Control Standard of Ground Surface Settlement Induced by Running Tunnel Construction in Beijing Subway
- Structural Analysis of Conical Bottom-Supported Offshore Wind Turbine Foundation
- One Dynamic Model of Human Elbow Joint in the Sagittal Plane
- The Comparative Analysis on Muscles of Short and Long Track Speed Skating Athletes
- Effect of Tensile Strain and Gold Thickness on the Micropattern Topography of Gold Thin Coatings Deposited on Polydimethylsiloxane
- Experimental Investigation on the Vortex-Induced Vibration of the Cylinders with Helical Strakes
- The Multi-Joint Measuring Arm's Error Compensation Method Based on the Pose Configurations
- Quality Control of Casting Slab for 510L Steel
- Effect of Temper Temperature on Microstructures and Mechanical Properties of 8CrV Saw Blade for Metallurgy
- An Overview of Recent Research Works on the Forming of Thermoplastic Composite Sheets
- The Factors that Affect the Absorption of CO2 on the Lithium Zirconate Materials
- Electrodeposition of Cobalt Nanoparticles from Mixture of 1-Butyl-3-Methylimidazolium Chloride Ionic Liquid and Urea
- The Effects of Nickel-Plating on Al2O3 Particles Reinforced Steel Matrix Composites
- Porous Alumina from Protein Foaming-Consolidation Method Containing Hydrothermal Derived Hydroxyapatite Powder
- Preparation and Application of Titanate Nanotubes on Methylene Blue Degradation from Aqueous Media
- A Novel Nonenzymatic Hydrogen Peroxide Sensor Based on Pd Nanoparticles Modified Electrode
- Effects of Filament Pre-Tension to the Characteristics of Solo-Sirofil Composite Yarn
- Evaluation of Antioxidative Activity between CoQ10-Nanostructured Lipid Carrier and CoQ10 Cosmetic
- Characterization and Visible-Light Photocatalytic Activity of Nano-Bi2MoO6 Catalysts Prepared by Hydrothermal Process
- The Preparation Technique of Nanometer Molybdenum Trioxide by Hydrothermal Synthesis
- Study of Superconductivity of Fe-Doping DyBa2Cu3-XFexO7-#948; Systems Using Positron Experiment
- Study on Thermal Fatigue Performance of Cold Work Roll Steel
- The Thermal Fatigue Performance for Cast Iron Brake Drum of Large Trucks
- Synthesis of Silver-Modified Sponge-Like Titanium Dioxide Arrays with Biomimetic Structure and its Enhanced Photocatalytic
- Fabrication of Porous Ceramic Scaffolds via Polymeric Sponge Method Using Sol-Gel Derived Strontium Doped Hydroxyapatite
- Experiment for Improving the Drum Strength of Agglomerate
- Preparation of Sn-In2O3 Nanoparticles Colloid Solution
- Preparation and Characterization of Novel Lithium Tantalate Target
- The Research on Fabrication Technique of Al2O3 Short Fiber Preform
- Numerical Study on Adhesive Interface Reinforcement of Piezoelectric Composite under Impact Load
- Experimental Investigations of Shear Lag Effect in a Simply Supported [0o #8725;±45o2 #8725; 0o]T Laminated Box Beam
- Effects of Aging Treatment on Performance of Explosive Welded Beryllium-Bronze/Carbon-Steel Composite Plate
- Ablation Properties of C/C-ZrC-SiC Composites
- The Role of Alum in the Fabrication of Calcium Silicate for Dissolved Acetylene Cylinders
- Testing on Energy Absorption of Banana Fiber Polyester Composite
- Nonlinear Response of Carbon-Carbon Composite Panels Subjected to Thermal-Acoustic Loadings
- Study on Cold-Pressing Technology for Mixture of Iron Ore and Coal
- Research on Mechanical Properties of Separation Concrete-Filled Steel Tubes Subjected to Eccentric Compression on Non-Separation Side
- Hot Deformation Behavior of the 30%Mo/Cu-Al2O3 Composite Prepared by Vacuum Hot-Pressed Sintering
- Behaviors of TiN Nanoparticles in Mn18Cr2 Steel
- Crystallization Kinetics of Amorphous Finemet Modified with Co
- Thermal and FTIR Characterization of Unsaturated Polyester Resin/Epoxy Resin Composites
- Study on Effect of Different Preparation Process Parameters on Properties and Microstructure of SiO2/Cu Composites
- Study on Electrical Sliding Wear Property of Cu/MoS2/Mo Composites
- Oxide Film Morphology and Composition Analysis of TP304H Austenitic Stainless Steel at High Temperature
- Hot Deformation Behavior of Al2O3/Cu-10vol%WC Composite
- Microstructure and Properties of 31Mn2SiREB Cast Steel
- Comparison of Conservatism on Applying Statistical Analysis Method to Determine Composite Allowance
- Controllable Synthesis of CuNWs in High Yield and their Potential Applications in SPR Based Fields
- Synthesis of Monodispersed Ag-Coated SiO2 Nanoparticles with one-Pot Method and Investigation of its Antibacterial Activity
- Novel Synthesis of TiO2 Nanocrystals Induced by Nanocrystal Cellulose
- Research on Thermal Deformation State of Mould Copper Plate with Different CC Technical Parameters
- Impact Damage Behavior of Composite Stiffened Plates
- Highly Sensitive and Selective Pymetrozine Colorimetric Sensor Based on P-Aminobenzenesulfonic Acid Modified Ag NPs
- Experimental Study of High Frequency Guided Wave Inspection of Anchored Bolts
- Fine Spherical Tungsten Powder Prepared by Precipitation Reaction
- Experimental Study on Cutting Forces in Turning Aluminum-Silicon Alloy ZL104
- Experimental Tensile Study on the Behavior of Composite Material with Roving Waviness
- Research on Ore-Proportioning Optimization Technology in Sintering
- Formation of Intermetallic Compounds on the Bond Interface of Aluminum-Clad Copper and its Influence on Bond Tensile Strength
- The Impact of Grain Size on Oxidation Behavior of TP304H Austenitic Stainless Steel at High Temperature in Air
- Study on the Effect of Different Joints Material on GRP Jacking Pipe
- The Accelerated Corrosion of Elemental Sulfur for Carbon Steel in Wet H2S Environment
- Study on the Effects of Deformation Temperature on Microstructure and Mechanical Properties of AZ80 Magnesium Alloy
- Physical Properties of Thermoplastic Cassava Starches Extruded from Commercial Modified Derivatives in a Pilot Scale
- Mircobial Sediment Solidification
- Hot Compressive Flow Behavior of Inconel 600 Superalloy
- Microwave-Assisted Extraction of Garlic Essential Oil from Garlic
- Effect of Calcium Stearate Concentration on Tensile Properties of Epoxidized Natural Rubber
- Effects of Heat Treatment on Microstructures and Properties of Ti811 Alloys
- Research on Corrosion Behavior of Al-Zn-In Based Anode Alloys by Circular Polarization Method
- Development of the Flux Solution for Omission of Water Washing Treatment of Hot Dip Galvanizing Process
- The Study of the Properties and Function of Large Ball Mill with Liner Material
- Effects of Ga on the Corrosion Morphology of Al-Zn-Sn-Ga Anode Alloy
- Research on Inverse Extrusion Process of High-Tin Wear-Resisting Cu-Sn-Pb-Ni Alloy
- Comparison Study on Microwave Absorbing Properties of SiC Absorbers
- Influence of Nano-Silica on Solvent Absorption in Polypropylene Packaging
- Research on the Application of VIPs to Reefer Containers
- A Study on Magnetic Filter Controlling TiN Films Prepared by Arc Ion Plating
- Thickness Dependence of Structural and Optical Characteristics of AZO Thin Films for Organic Photovoltaic Cells
- Effect of Heavy Metals and Leaching Toxicity of Magnesium Potassium Phosphate Cement
- Study on Erosion Wear Property of Nickel-Chromium Cast Iron
- Effect of Iron (III)-Doping on the Photocatalytic Activity of Titanium Dioxide Catalysts for Methylene Blue Degradation
- Analysis of the Impact of Row Materials on the Performance of Self-Leveling Cement Mortar
- Influence of Refiner on the Properties and Microstucutures of High-Tin Wear-Resisting Cu-Sn-Pb-Ni Alloy
- Application of Slow-Release Fertilizer with the Function of Water-Absorption and Water-Retention in Position Engineering Camouflage
- Extraction Behavior of Mercury(II) and Cadmium(II) in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 8-Hydroxyl-Quinoline
- Effect of Aging Treatment on Microstructure and Properties of Cu-3Si-2Ni Alloy
- Tensile Properties and Microstructure of ZK60 Magnesium Alloys at High Temperature
- Structure and Compression Properties of Polyurethane-Imide Foams
- Prepartion of Al-Mn Alloy Coatings on Low Carbon Steel by Hot-Dip-Aluminizing
- Microstructure and Mechanical Properties of AZ81 Alloy with Gd
- The Dynamics for Aqueous Sodium Adsorption and Characterization of Natural Pyrophyllite
- The Microstructure of Ni-Based Surface Infiltrated Layer on Cast Steel Substrate
- Detection Experiments of High-Barrier and High-Temperature Sterilization and Easy Tear Flexible Plastic Packaging Materials Applied in Food Packaging
- The Design of a Compact Cable System for Bridge
- Study Progress of Material Surface Modification with Large Scale Pulse Electron Beam
- Preparation and Contrast of Transparent Conductive TiO2/Ag/ZnS Film by Magnetron Sputtering and Evaporation Coating Deposition
- Property Investigation on a Precious Ceramic Alloy
- Love Waves in a Piezoelectric Half-Space with an Anisotropic Elastic Layer
- Evaluation on some Properties of SL7560 Type Photosensitive Resin and its Fabricated Parts
- Modeling and Prediction of Creep Behavior of Polypropylene Packaging Belt
- Research on Failure Criteria of Homogenization Model of Masonry
- The Effect of Pressure-Induced Flow Processing on the Tensile Properties and Crystal Structure of Polypropylene
- Effect Evaluation of Slope Protection for Herbs Based on the Principal Component Analysis
- Mechanical Performances of Concrete Made with Manganese Slag
- Study on the Performance of a Novel Shrinkage Reducing Admixtures (SHSRA) of Concrete
- Improvement of Hydrogenation and Dehydrogenation Kinetics on MgH2 by the Catalytic Effect of ZrO2
- An Experimental Study on Relationship between (Meth)Acrylate Polymers Structure and its Film Surface Wettability
- Hemicellulose Extraction from Coconut Shell
- Synthesis of Polymers Containing C-N Bond Using Pd-Catalyst
- Thermal Bridges in Building Envelope in Hot Summer and Cold Winter Areas of Thinking
- Correlations between Different Hardened Properties of High-Strength Self-Consolidating Concrete Including Palm Oil Fuel Ash
- Influence of Carbon Content on Fe-Cu Alloy Material Performance in Induction Motor with Compound Cage Rotor
- Synthesis and Drug Release from a PH/Temperature Sensitive Bead of Poly(N-Acryloylglycinate) and Alginate
- Effect of Phosphorus Slag and Fly Ash on Anti-Corrosion Property of High Belite Cement
- Influence of Porosity on Polarization in Piezoelectret Films with Regular Microstructure
- Dynamic Characterization and Drug Release of Thermosensitive Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Copolymer Hydrogels
- Effects of Ca on Mechanical Properties of Mg-6Zn-3Al Alloy
- High Temperature CO2 Adsorption on Si-Doped Lithium Zirconate
- Drug Release of a PH/Temperature Sensitive Core-Shelled Beads from Sodium Alginate and Poly(N-Acryloylglycinate)
- Investigation of Vibration Properties of Multi-Walled Carbon Nanotubes
- Growth Mechanism of Hollow ZnO Microsphere with Aperture Prepared by Oxidation of Zn Powder
- The Law of the Grain Size Changing in the Warm Tension Test for the B340/590DP Dual-Phase Steel
- Study on the Microstructures and Wear Resistance of ZG30 Steel Surface Layer
- Effect of Bath Compositions on the Properties of Electroless Ni-Cu-P Alloys on Aluminum
- Simulation of V Atom Substitution Character in Ni-Al-V Alloy
- Effects of Annealing Temperature on Properties of CuIn (Se,S)2 Film Prepared by Sputtering
- Adsorption Behavior on Modified Fly Ash/EPDM Composite for Application in Machine Oil
- Effect of the Duty Cycle on Boronized Layer Formed by Pulse Electrodeposition
- Synthesis of Lactic Acid Grafting Starch Copolymer Catalyzed with Stannous Chloride
- Surface Modification for Porous Artificial Lightweight Aggregate and Mechanical Properties of the Resulting Concrete
- Building of Poly(Imino Ketone) Chains Model via Molecular Simulation
- Nano-Crystalline Diamond Films Deposited on Copper Substrate by MPCVD Method
- Effects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP Treated Alloy 718
- Facile Synthesis of N-{{2-[4-(2-Pyrimidinyl)-1-Piperazinyl]ethyl}} Adamantane-1-Carboxamide
- Synthesis and Spectroscopic Properties of LiY(WO 4)(MoO 4): Eu 3+ Red Phosphors for White LEDs
- Structures and Properties of the Coating for SPEEK/WPU
- Effect of Sn on Corrosion Resistance of Mg-6Al-1.2Y-0.9Nd Alloy
- The Research on Technology of Electroless Ni-W-P Ternary Alloys Plating on the Aluminium Alloy
- The Effect of Bacterial Cellulose on the Mechanical and Thermal Expansion Properties of Kenaf/Polylactic Acid Composites
- Strength Properties of Low Thermal Conductivity Fly Ash Bricks: Compressive and Flexural Strength Aspects
- Fair-Faced Light Weight Aggregate Concrete Preparation and Durability Research
- Cellulose Tris(3,5-Dimethylphenylcarbamate) Regioselectively Bonded to Small Pore Silica Gel as Chiral Stationary Phase for HPLC
- Evaluation on the Corrosion Resistance Improvement by Dipping to Inhibitor Solution of Galvanizing Steel
- Preparation, Characterization and Thermal Behavior of Copper(II) Complex with 1-(6-Hydroxynaphthalen-2-Yl)butane-1,3-Dione
- Preparation and Characterization of Konjac Glucomannan Gel
- Oxidation Behavior in Super-Plastic Microforming of Zr65Cu17.5Ni10Al7.5 Bulk Metallic Glass
- The Thickness Testing Technology of the Metal Base and Anticorrosion for Double Coating Corrugated Sheet Steel Beams for Guardrail
- The Relationship between the Free and the Bound Chloride in High Performance Concrete
- Study on Strength Reduction Method Based on Hinge Joint Concrete Block Slope Stability
- Description of Planer Anisotropy and Cyclic Plasticity Behavior of Aluminum Sheet Based on Crystal Plasticity Theory
- A Study of Polyvinyl Chloride Modified by Barium Sulfate
- Effect of K / Na on Primary Boride of Hypereutectic High-Boron Alloy
- Preparation and Evaluation of Fe2O3/Ceramic Composites for Flue Gas Desulfurization
- Preliminary Study on High Efficiency Deinking Agent of ONP
- A Contrastive Study between Chinese Traditional and Western Classical Column within Style Decoration
- Study of Selecting Proper Chitosan from Various Chitosan Sample as Paper Strengthening Agent
- Study on the Effect of Surface Coating on Thermal Manikin's Repeatability
- Drug Release Behavior from a pH/Temperature Sensitive Hydrogel of Poly(N-Acryloylglycine) and Chitosan
- Synthesis and Characterization of Thermoplastic Biomaterial Based on Acylated Chitosan Oligosaccharide
- Research on Application of Phosphorus Slag in Cement
- Efficient Adsorption of NH4+ Ions on Modified Fly Ash/EPDM Environmentally Friendly Composite
- Microstructure and Mechanical Properties of Mg-9Al-6.5Ca-3Zn-0.6Mn-XNd Alloys Prepared by Spray Forming
- Study on Processing Technology for Mold Cavity Parts
- ADAMS-Based Braking System of a Tracked Vehicle to Optimize Mechanical Linkage Design
- Gravity Anomaly Computed by GOCE Data in Northeastern Margin of Tibetan Plateau
- Investigation of Cutting Model in Machining of Al/SiCp Metal Matrix Composite
- Physical Simulation of Grooved Axis Warm Surface Rolling
- Slope Instability Risk Analysis in Earth Dams Considering Uncertain Factors
- Research on Technological Mineralogy of Refractory Hematite Ore
- Experimental Investigation on Surface Integrity in Grinding Titanium Alloys with Small Vitrified CBN Wheel
- Microscopic Mechanism Research of T10 Steel Accumulated Plastic Deformation in Low Stress Load
- Comparative Analysis of Automotive Interior Trim Materials Based on Moldflow
- Prediction of Edgewise Compressive and Side Tensile Elastic Modulus of Core Materials of Ripple Structure Sandwich Composites
- Study on Machining Dental Implants by Whirling Approach
- Analysis and Simulation on the Connection Strength of Flareless Tube Fittings
- Microencapsulation of Cajuput Oil by Spray Drying: Influence of Wall Systems on the Oil Retention and Storage
- Effect of Solidification Pressure on Secondary Dendrite Arm Spacing of Aluminum Alloy
- Study on State Recognition of ASCE Benchmark FEM Based on Lyapunov Exponent Spectrum Entropy
- Floating Grains in the HDC Casting 7075 Aluminum Alloy Ingot
- Finite Element Analysis and Topology Optimization of the Clamping Unit in a Two-Platen Injection Machine
- Static Analysis of Curved Beams with Clamped-Clamped Ends under Thermo Load
- Study on the Influence Factors of Real Estate Price Based on Regression Model -- The Case of Jilin City
- Review of Research on Special Load and Vibration Behavior of Shaft Tower Structure
- Experimental Study on Dynamic Modulus Master Curve of ATPB Mixture
- Optimization of Cutting Parameters on Turning Process Based on Surface Roughness Using Response Surface Methodology
- The Deformation Simulation of the Laser-MIG Hybrid Welding in Fillet-Welded Joint
- The Recrystallization Simulation of H-Beam Rolling Process
- Checking Gypsum as Structural Material
- Design and Optimization of the Deposition Baffle Shape for Magnetron Sputtering
- Design of Parking Control Systems Based on Wireless Sensor Network
- Influence of Surface Treatments on Fretting Fatigue Life Prediction in TA15
- Effects of Enzymatic Modification of Masson Pine Mechanical Pulp on Fiber Morphology and Pulp Properties
- CTOD Testing and Evaluation for Weld Joint for Heavy Thickness Offshore Structure Steel S355G10+N
- Burr Minimization in Shaping of Aluminium Alloy-Through Experimental and Stress Analysis Approach
- Research on Modification of Bentonite and its Printing Quality when Used in Color Ink-Jet Paper
- Analysis on the Distribution Law of WC Particles during Centrifugal Casting Process
- The Surface Roughness Modeling on Turn-Milling Process and Analysis of Influencing Factors
- Finite Element Analysis of Materials Flow Behavior in Friction Stir Welding of 7075 Aluminum Alloy Plate
- Research on Design for Comforts of Modern Residence
- Finite Element Analysis and Experimental Study on Rubber Waveform Generator
- Numerical Simulation Temperature Field of Laser Cladding Titanium Alloy
- Research on Slope Deformation Regularity of the Badong Formation in the Three-Gorges Reservoir Area
- Precision Forming and Die Design for Octahedral Shell of Static Stents
- A New Nitriding Process of 4Cr5MoSiV1 for Extrusion Die
- Numerical Simulation of the Cold Expansion and Residual Stress Relaxation for Aluminum Alloy 7050
- Microstructure of Flame-Spray Welded Ni-Based Alloy Coating and Base Metal
- Investigation of the Effect of Heating-Lines on Tensional Mechanical Properties of Sheet Metal after Laser Forming
- CDM Model and its Application to Numerical Simulation on Rotating Band's Engraving Process
- Research on Fire Performance of a Profiled Light Aggregate Concrete Composite Floor
- Identification of Subsurface Deformation in Machining of Inconel 718
- Superplastic Behavior and Constitutive Equation of AZ31B Magnesium Alloy
- Effect of Underlay Rigidity on Breaking Behavior of Aluminum Sheet during Wedged Shearing Process
- A New Porous Mullite Nozzle for Refining Molten Aluminum
- Influence of Cooling Rate on the Microstructures and Properties of Q550
- Milling Parameters Optimization by Grey Relation Theory
- Study on Simulation of Dispersing Uniformity of Aluminum Alloy Melt in Rheo-Casting Mold
- Influence of Friction on Metal Flow Behaviour and Die Stress of Backward Extrusion
- Numerical Study on the Relationship of the Axis Orientation of Deeply Buried Circular Tunnel and the Direction of Horizontal In Situ Stress
- The Force Theoretical Analysis and Experiment for Wire Saw with UVM Cutting SiC Monocrystal
- Study on Registering Accuracy and Precision in Test of Printing Press
- Numerical Simulation on the Microstructure of Small Electroslag Remelting Ingot
- The Experiment of CO2 Pollution and Treating in Silicate-Based Drilling Fluids
- Study on Borehole Stability in Haita Basin
- Experimental Study on Frost Resistance of the Shale Ceramsite Concrete
- A Novel Approach in Improving I/O Performance of Small Meteorological Files on HDFS
- Influence of Microstructure of TC4 Titanium Alloy on Ultrasonic Velocity and Attenuation
- Critical Strain Model of Cr4 Steel for Heavy Supporting Roller
- The Boundary Element Method to Solve the 2D Elastic Stress and Displacement Problem
- The Study on Harmonic Characteristics of Three-Phase SPWM Inverter
- Energy Consumption Analysis of Cooling System in Jiahe Deep Coal Mine
- Study on Determination of Friction Model at the Tool-Chip Interface of Titanium Alloy Ti6Al4V Based on Orthogonal Cutting
- Effect of Cold Reduction Ratio and Annealing Temperature on Microstructure and Mechanical Property of Added Phosphorus High Strength Nb-IF Steel
- The Mathematical Model of Online Quenching for Extruding Bar of 6061 Aluminum Alloy
- Study on a Model for Perceived Text Definition of Multi-Stroke Chinese Character
- Study on the Influence of Deforming Velocity on Steel Ball Quality Based on DEFORM
- An Airflow Field Finite Element Analysis of the Seed Adsorption Hole of Pneumatic Seeder
- Study on Corrosion Resistance of High-Entropy Alloys NiCoCrFeMnCuC in Medium Acid Liquid
- The Influences of Interface Properties Weakening on Bearing Behavior of Pile Foundation
- Multi-Feature Fusion Based Object Detecting and Tracking
- Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer
- Effect of Initial Particle Size on Coarsening Kinetics of #947; Prime Precipitate in Nickel-Based Superalloy - A Phase Field Study
- A New Method to Accurately Describe Cross-Section Distortion in Rotary Draw Bending Process of Thin-Walled Rectangular Tube
- An Experimental Study on Electric Hot Milling for T10A Tool Steel
- The Analysis on Structure of U-Shaped Compartment Based on Soil Mechanics Principle
- Study on a Method for Vibration Control of the Aeronautic Thin-Walled Workpiece in High-Speed Milling Process
- Study of Post-Fire Behavior of a Profiled Sheet-Ceramsite Concrete Composite Floor
- Numerical Simulation on Back-Extrusion Loadcase of Magnesium Alloy Wheel
- Analysis of the Relationship between CTOD Toughness and Micromechanism of Marine Steel Weld Joints
- Experimental Study on the Effect of CGHAZ Microstructure on CTOD of High-Strength Steel EQ56
- Neural Network Based Toughness Prediction in CGHAZ of Low-Alloy Steel Produced by Temper Bead Welding
- A Study of Fuzzy Neural Networks Control for the Quality of Resistance Spot Welding
- Interface Microstructure and Weld Strength of Steel/Aluminum Alloy Joints by Resistance Spot Welding
- Effect of Activating Flux and Welding Parameters on Performance of Aluminum Alloy Weldment in GTA Welding Process
- Effect of Microstructure on CTOD of Welded Joints for Offshore High-Strength Steel