Advanced materials research II : selected, peer reviewed papers from the 2012 2nd International Conference on Advanced Material Research (ICAMR 2012), January 7-8, 2012, Chengdu, China /
Saved in:
| Meeting name: | International Conference on Advanced Material Research (2nd : 2011 : Chengdu, China) |
|---|---|
| Imprint: | Durnten-Zurich, Switzerland ; Enfield, NH : Trans Tech Publications, ©2012. |
| Description: | 1 online resource (xxiv, 1754 pages) : illustrations (some color) |
| Language: | English |
| Series: | Advanced materials research, 1022-6680 ; v. 463-464 Advanced materials research ; v. 463-464. |
| Subject: | Materials science -- Congresses. Materials -- Research -- Congresses. TECHNOLOGY & ENGINEERING -- Material Science. Materials -- Research. Materials science. Electronic books. Electronic books. Conference papers and proceedings. |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11160498 |
Table of Contents:
- About the Study of the Springs Loaded with Uniform Radial Charge Density by Transfer-Matrix Method
- Adsorption Kinetics of Zn(II) from Aqueous Solutions onto Epichlorohydrin Crosslinked Chitosan
- Analog Computation of Forms of Uranium Presence in Aqueous Solution
- Bending Study for Axially Symmetric Tapping Plates with Uniform Load at All Crown by Transfer-Matrix Method
- Chemical and Structural Characterization of #947;/#947;#8242; Interfaces
- Composition Typomorphic Characteristics of Pyrite in Various Genetic Type Gold Deposits
- Crashworthiness Optimization of Thin Walled Cylindrical Tubes with Annular Grooves under Axial Compression
- Crystal Morphology of Hydroxyapatite Modulated by Glutamic Acid at Different Hydrothermal Temperatures
- Effect of Low Temperature Aging on Internal Friction of AA2024
- Effects of Co-Existing Anions on Fluoride Adsorption onto Magnesia-Amended Activated Carbon
- Effects of Cu on Microstructure, Mechanical Properties and Damping Capacity of As-Cast Mg-3%Ni Alloy
- Effects of Eva-Hot Melt Adhesive Polarity and Rheology on 3PE Modes
- Evaluation of Different Geometry of Received Pulses from CdZnTe Semiconductor Detectors
- Experimental Investigation of the Volatilization of Asphalts under Different Conditions
- Experimental Study on Bending Creep Behavior of Modified Fast-Grown Poplar Wood in Uncontrolled Condition
- Impact Test in Working Space of Milling Center
- Influences of Final Processing Methods on Surface Physical Properties and Fatigue Life for Railway LZ50 Steel
- Investigation the Adsorption of Heavy Oil from Solution by Low-Cost Material
- Low Cycle Fatigue Behaviour of Al-Mg-Si Alloy AA6061 Processed by Equal Channel Angular Pressing
- Microstructure and Tensile Properties of Forged High Nb Containing Tial Alloy on Large Scale
- Monitoring Nugget Size of Micro Resistance Spot Welding (Micro RSW) Using Electrode Displacement-Time Curve
- Morphology Evolution and Luminescence Properties of YF3: Sm Nano-/Microcrystals
- Numerical Analysis of Crack Propagation in Brittle Materials under Uniaxial Compression
- Reaction Mechanisms of Li5La3Ta2O12 Powder with Ambient Air: H+/Li+ Exchange with Water
- Research on Adsorption of H2S by Modified Activated Carbon
- Research on Adsorption of H2S by Oil Shale Ash
- Research on Effect of Paper Containing OBA on Color Reproduction
- Structural and Electronic Properties of Pt3 and Pt3M Clusters (M=Au, Ag, Sn, Fe)
- Studies Regarding the Movement on the Cochleoid
- Study of an Inorganic Ion Exchanger Al2Ti(PO4)3.3333
- Study of Circular Tapping Plates, with a Circumferential Vertical Load at the Interior Boundary by Transfer-Matrix Method
- Synthesis and Characterization of CeO2-ZrO2-Al2O3 with High Thermal Stability and Oxygen Storage Capacity from Pseudoboehmite Precursor
- Synthesis of Al1.6667Ti(PO4)3 and its Selectivity to Li+ Exchange
- The Experimental Study on Engineering Characteristics of Improved Clay
- The Flexural Behavior Study of Composites Material in Static Three-Point Bending Test
- The Study of Epoxy Resins Modified By PPESK
- The Synthesis and Ion-Exchange Property of Li+ Memorized Inverse Spinel Al2.6667Ti(PO4)4
- The Synthesis of Iron Oxides with Different Phases or Exposure Crystal Planes and their Catalytic Property for Propene Oxidation
- Thermodynamics of Organic Dyes Adsorption onto Thermal Modified Rectorite
- Variation of Microstructure and Properties of Re-7075 Al Alloy after Homogenizing Annealing
- Analysis of Thermomechanical Behavior in Continuous Casting Mould and Design of Breakout Prediction System
- Chiral Inorganic Solid Material Development
- Design of Rubberized Asphalt Concrete by Means of Coarse Aggregate Void Filling Method
- Effect of Physical Properties of Manufactured Sand as Fine Aggregate in Elastic and Shrinkage Properties of Concrete and Mortar
- Evaluation of Direct Rapid Prototyping Pattern for Investment Casting
- Load Carrying Capacity and Ductility of CFRP-Reinforced Earthquake Waste Filled Circular Steel Tube Columns
- Pier Form Selection and Parameter Analysis of Reinforced Concrete Thin-Wall High Pier
- Properties of Cold Pressure Welded Aluminium and Copper Sheets
- Shear Behaviour of RC Beams Strengthened with FRP Materials
- The Influence of Reinforced Concrete Beams Crack on Size Effect
- A STATIC-LEACH WSNs for Hazardous Materials Monitoring
- Advancing Ceramics Glaze Formulation with Existing Software Technology Using Locally Available Raw Materials in Nigeria
- CdTe@SiO2 Particles Prepared via Reverse Microemulsion Method: A Linear Connection between Shell Thickness and Tetraethylorthosilicate
- Dielectric Properties of Barium Titanate Ceramics Modified by CuO in Different Methods
- Experimental Study of PTFE Powder Size Impact to Mg/PTFE Pyrotechnic Composition
- Gold Nanoparticle's Temperature Effect in Photoacoustic Tomography
- La and/or Y Doped TiO2: Facile Synthesis and Enhanced Photocatalysis
- A Study of the Effect of the Inertia Force of the Vanes on the Performance of the Hydraulic Vane Pump with Hypertrochoid Curve in the Inner Surface of its Stator
- A Theoretical Study of the Internal Forces in a Hydraulic Vane Pump with Hypertrochoid Curve in the Inner Surface of its Stator
- Comparison Study of the Geomagnetically Induced Current Level of Power Grid in Different Latitude
- Corrosion Failure Analysis of L80 Oil Tube
- Influence of Surface Mechanical Attrition Treatment on Fretting Wear Behaviour of Ti-6Al-4V
- Surface Measurement of GLSI Wafer with Copper Interconnects after CMP
- Synthesis, Characterization and Emission Properties of a Mixed Metal Complex of Europium (III) and Terbium (III) with a Tripodal Heptadentate Schiff Base Ligand
- The Application of FDM in Solving Problem of Electromagnetic Field
- The Sliding Frictional Contact Problem in Two Dimensional Graded Materials Loaded by a Flat Stamp
- Transition in the Fretting Phenomenon Based on the Variabile Coefficient of Friction
- A Two-Step Method to Prepare Stable Superhydrophobic Surface on Steel Substrates
- Aluminium Alloy Matrices Reinforced with Coated Particulate Silicon Carbide
- Comparative Solid Particle Erosion Characterization of Conventional and Nanostructured Al2O3-13wt.%TiO2 Ceramic Coatings Fabricated by Plasma Spraying Process
- Damage Patterns of the Hexagonal Aluminum Honeycomb Sandwich Plate Subjected to Fragment Impact
- Effects of Surface Pretreatment to the Properties of Aluminum Oxide (Al2O3) Cutting Tool Coated Amorphous Graphite
- Electroless Ni-P Coating of Cenospheres Using Copper Sulfate Activator
- Electron Spectroscopic Studies of Homogenous (GaMn)As Layers
- Fabrication and Characterization of ZnO Nanorod Arrays Grown on Nickel-Coated Polyester Fiber
- Influence of Addition of Tungsten-Iron Powder on Microstructure of WC/Steel Composite Coatings
- Optimization of Pre-Treatment Parameters before Diamond Coating Using Non-Dominated Sorting Genetic Algorithm (NSGA-II)
- Oxide Layer Modification of Mg-Al Alloy Coated by Plasma Electrolytic Oxidation Using Zirconia Particles
- Preparation and Electrochemical Characterization of an Activated Carbon Material of High Surface Area for Supercapacitor
- Research on Corrosion Resistance of the GTAW Joint of Duplex Stainless Steel
- Tribological Properties of Plasma-Sprayed 20 wt. % ZrO2-Al2O3-17 wt.% TiO2 Coatings on Plain Carbon Steel Substrate
- A Method to Determine the Optimal Solids Content of TiO2 in DSSC Working Electrode
- Cancellation Effect in Three-Phases TiO2/(PVDF+Fe3O4) Composites
- Comparison of Oscillography Impact Properties between a New Type Drilling Collar Steel and 4145H
- Correlation of Mechanical Properties of Cast Al 3xx Alloys to Processing Variables and Alloy Chemistry Using Regression Analysis and Artificial Neural Network Techniques
- Effect of Rolling on Microstructure and Wear Behavior of Hot Rolled Al6061-Beryl Composites
- Effect of Surface Treatment on Interfacial and Properties of Water Hyacinth Fiber Reinforced Poly(Lactic Acid) Composites
- Effects of La2O3 and Nb2O5 Doping on the Dielectric Properties of Ba0.9Sr0.1TiO3 Ceramics
- Experimental Study of the Compressive Performance of Life Jacket Use Polyurethane Foam for Blast Wave Protection
- Fabrication and Mechanical Properties of ZrO2/Ni Functionally Graded Materials
- Ferroelectricity of PZT-Based Thin Films Doped with Mn and Nb
- First-Ply Strength of Thick Circular Cylindrical GRP Composite Shell Subjected to Static External Pressure via Finite Element Simulation and Analytical Approaches
- Germanium Adsorption on SrTiO3 (001) 2×1 Surface: A Density Functional Theory Study
- Influence of Liquid Structure Change on Microstructure and Properties of SnZnBi Solder Alloy
- Microstructure and Wear Property of Zn-Al Alloy Reinforced with Carbonized Rice Husks
- Modeling of Viscoelastic Solid Polymers Using a Boundary Element Formulation with Considering a Body Load
- Nucleation and Growth of Cr7C3 of Brazing Diamond with Ni-Cr Alloy in Protective Atmosphere Furnace
- Preparation and Photoluminescence Properties of ZnO-Covered Carbon Fibers
- Preparation and Properties of Halogen-Free Flame Retardant Blending Modification Polyester
- Preparation and Properties of Nanocomposites Based on Poly(Lactic Acid) and Modified TiO2
- Preparation of Poly[4-Diacetoxyiodo] Styrene by Microwave Reactor
- Synthesis and Characterization of Polystyrene-Graphite Nanocomposites via Surface Raft-Mediated Polymerization
- Synthesis of FeC2O4-Graphene Composites and their Application in Removal Dyes
- Synthesis of Fullerene-Acid Conjugates
- Synthesis of Novel Core-Shell Structured Hydroxyapatite/Meso-Silica for Removal of Methylene Blue from Aqueous Solutions
- Synthesis, Characterization of Electrospun Mesoporous ZnO/SnO2 Composites Nanofibers and their Photocatalytic Property
- Synthesis, Characterization, and Electrochemical Properties of Mn3O4/Cr2O3 Composite
- The Effect of N Vacancy on GaN Doped by Fe
- Thermo-Chemical Evaluation of Wood Plastic Nanocomposite
- Two-Dimensional Modeling of Functionally Graded Viscoelastic Materials Using a Boundary Element Approach
- Assessment on Screw Fixing Failure Mode for Kitchen Cabinet Particleboard
- Comparative Study by Numerical Analysis on the Formability of Deep-Drawn Tailor-Welded Blanks
- Design of Optimization Parameters with Hybrid Genetic Algorithm Method in Multi-Cavity Injection Molding Process
- Investigation of Deposition Parameter Effects on Energy Bandgap of Silicon Thin Film Prepared by Plasma Enhanced Chemical Vapor Deposition via Factorial Experiment
- PLM System for Complex-Shape Aircraft Gas Turbine Parts
- Preparation and Analysis of Sputtered Cu2ZnSnSe4 Thin Films
- Tap-Changer Sliding Gear Urgent Stop Device of Main Transformer Integrated with RTU
- The Effect of N2 Gas Pressure during the Rapid Thermal Process on the Structural and Morphological Properties of Cigs Films
- The Finite Element Simulation of Lamb Wave Propagation in a Cracked Structure with Coupled Filed Elements
- The Influence of Annealing Temperature on ZnO Thin Films by Oxidating Zinc Films Deposited with Magnetron Sputtering
- Unified Stresses Solution for Sheet Forming
- Based on ABAQUS Five Axis Milling Process Dynamics Modeling and Analysis
- Comparison of Different Residual Stress Models of FSW Butt Joints for Thin Aluminum Alloy Plates
- Contour Errors during Milling Process
- Development of an Efficient Haptic System for Tooth Processing
- Discussion of Nonlinear Constitutive Models for Aluminium Alloy Material Engine Piston
- Estimation and Optimization Cutting Conditions of Surface Roughness in Hard Turning Using Taguchi Approach and Artificial Neural Network
- Oxidation Behaviors of Dusts Generated in Different Cutting Processes of Silicon Ingots
- Prediction and Optimization of Dimensional Shrinkage Variations in Injection Molded Parts Using Forward and Reverse Mapping of Artificial Neural Networks
- Prediction of Surface Finish and Optimization of Machining Parameters in Turning
- Regarding the Optimization of Measurement Systems for Grinding Forces in Case of High Speed Industrial Robots
- Solving Load Phase Balancing Problem in LV Distribution Networks by Chaotic Simulated Annealing
- Study on Anti-Galloping Mechanism and Experimental Effect of the Rotary Clamp Spacer
- Study on Influence of Paper Fillers on Ink Transfer
- Study on Processing Properties of Epoxy Resin System in VARI
- System to Surface Control in Robot Machining
- The Influence of Circulation Quenching on Temper Brittleness of Steel EA4T
- The Influence of Paper Brightness on Color Reproduction of Printed Matter
- Annealing Effect on Synthesis of VO2 (M) Nanopowders by a Novel Solution-Based Process
- Effect of Fluorine Content on the Electrochemical Properties of PVDF-Derived Carbons for Lithium Ion Battery
- Effect of Poly(vinyl alcohol)/Chitosan Ratio on Electrospun-Nanofiber Morphologies
- Fabrication of Nanomaterial Devices for Field Emission Applications
- Hydrogen Generation from CDS Modified-Titania Nanotube Arrays
- Nanomechanical Properties of Vimentin Intermediate Filament
- Preparation and Performance of 100Ah Li-Ion Battery with LiFePO4 as Cathode Material
- Preparation of Cr2O3 Nanoparticles via Hydrothermal Reduction of CH3OH
- Research on Metallic Silicon Used as Lithium Ion Battery Anode Material
- Research Progress on Preparation Methods of PMIA Fiber
- Research Progress on Ultraviolet Resistance Performance of PMIA Fiber
- Sodium Nitrate Assisted Hydrothermal Synthesis of Na0.5Bi0.5TiO3 Nanoflakes
- Synthesis of Barium Titanate Nanoparticles from Decomposition of Barium Titanyl Oxalate Tetrahydrate with Aid of Supercritical Water
- Synthesis of Self-Aligned Titanium Oxide Nanotube Arrays in Ammonium Fluoride-Ethylene Glycol Electrolytes with Different Water Contents
- The Effects of Heteroatom-Doping in Stone-Wales Defects on the Electronic Properties of Graphene Nanoribbons
- The Mean Projected Range and Range Straggling of Er Ions Implanted in 6h Silicon Carbide
- TiO2 Nanowires/Nanobelts Originating from Anodically Grown Nanotube Arrays
- A Theoretical Framework for Healthcare Innovation Management Using Wiki Based Digital Ecosystem
- An Application of Finite Element Modeling to Pneumatic Artificial Muscle from FESTO
- Application of Lignin from Oil Palm Biomass as a Fluid Lost Reducer
- Assisted Research and Optimization of the Proper Neural Network Solving the Inverse Kinematics Problem
- Bioconjugates Containing Ferritin and Metal Nanoparticles
- Effect of HF Concentration on Corrosion Resistance of Biomedical Implants
- Effect of Zr Addition on Mechanical Properties of Ti-Nb-Zr Alloys for Biomedical Applications
- Effects of Different Neutralizing Agents on D-(-)-Lactic Acid Fermentation by Escherichia coli W
- Efficiency Improvement of Three-Junction Photovoltaic Cell Based on Gallium-Phosphide-Oxide, Indium-Gallium-Arsenide and Indium-Gallium-Antimonide
- Functional Properties of Ultrasonically Treated Wheat Gluten
- Improvement the Cooperation Feature in Distributed Healthcare Information Systems Based on the Fractal Approach: An Empirical Study
- Laboratory Study on a Novel Self-Diverting Gel Acid System Thickener
- Prehensile and Stepping Mchanisms for Rbots, Based on Bomechanisms
- Preparation of Precursor of Lini0.5mn1.5o4 with High Density
- Review State of Biomass Energy in Iran
- Static Balancing of Mechanical Systems Used in Medical Engineering Field - Continuous Balancing
- Synergistic Effect of Lysozyme and Vitamin B1 on the Corrosion Inhibition of Carbon Steel in Sulphuric Acid
- The Application of Learning Impedance Control to Exoskeleton Arm
- The Effect of Denser Material than Air in Front of Clinical Radiotherapy X-Ray Beam
- Ultrasonic Ion Pumps in Bio-Battery's Electrolyte
- A Hybrid TS-SVM Model for Evaluation of Lake Eutrophication
- A New PSO-RBF Model for Groundwater Quality Assessment
- A Virtual Geographic Environment for Simulation Analysis of Dam-Break Flood Routing
- Design and Anaysis of Thermoacoustic Air Conditioning System as Environmental Friendly Device
- Evaluation of State Equations of Natural Gas in Pipeline Transportation
- Future of Wind Energy in Iran
- Global Structure Analysis of a Class of Power System with Zero Characteristic Root
- Investigation of Radon in Campus Air
- Marine Environment Problems Caused by the Development of the Coastal Cities and the Solutions for them
- New Technologies of Energy Saving and Low CO2 Emission for Iron Making
- Optimization Design for Production Logistics System of Corrugated Box
- Photocatalyst TiO2 Supported on Bentonite for Water Organic Pollutants Purification: A Literature Review
- Research on the Influence of Solar Radiation, Sky Background Radiation and Sea Surface Emission to Infrared Search
- Review of Renewable Energy in Iran
- Review State of Geothermal Energy in Iran
- Solar Home System: A Feasible Solution to the Energy Crisis in Bangladesh
- A New Type of Walking Robot Based upon Jansen Mechanism
- Considerations on Decisions Making Process under the Risk of Terrorism
- Dynamic Optimization of a Plane Manipulator
- Optimization of the Neural Network by Using the LabVIEW Instrumentation
- Proportional Pneumatic Distributor
- Structure and Kinematics of Mechanisms for Position and Control from Farming Machine
- The Empirical Research of Energy Utilization Efficiency in Industrial Sectors Based on DEA-Malmquist
- The Role of Information Sharing and Joint Transportation Process for Empty Run Reduction
- Using an Object-Oriented Approach for Scalable Flexibility in Manufacturing
- Impact of 3D Seismic Technologies on Sedimentology Study
- Prediction of Rupture in Gas Forming Process Using Continuum Damage Mechanic
- Study of Sol-Gel Auto-Combustion Method Prepare Ni0.6-xZn0.4MgxFe2O4
- Study on the Microstructures and Properties of the Lead-Free Easy-Cutting Bial-Brass
- A Model for Predicting Flowing Gas Temperature and Pressure Profiles in Buried Pipeline
- A Survey on the Evolution of Nonconventional Pneumatic Actuators
- A Web-Lab Environment for the Study of the Job Shop Problem
- Algorithm for Selection of Simulation Software
- An Analysis Method of the Electro-Hydraulic Rotational Module
- An Approach for Simulation Design of Mechanical Assembled Units
- Analysis & Modelling Options of Elastic Actuators for New Robotics Uses
- Assisted Research of the Dynamic Neural Networks with Time-Delays and Recurrent Links
- Assisted Research of the Neural Network
- Computers Modeling and Simulation
- Facility Layout of Manufacturing System and Design of Optimization Model
- Increasing the Operating Safety of the Machine-Tools by Using Hydro-Pneumatic Accumulators. Modeling - Simulation
- Modeling and Simulation of A 6 Dof Robot
- Modelling and Experimentation of Solid Lubrification with Powder MoS2 through Self-Repairing and Self-Replenishing
- Multimode Vibrations Suppression Compensators Design Using Specified Dynamic Performance Reference Models
- Optimal Design of the Mechanical Systems Using Parametric Technique & MBS (Multi-Body Systems) Software
- Optimization by Simulation of Fabrication in Manufacturing Robotized Systems
- Optimization of the Hydraulic Bellows Engine Parameters Used to Drive Irrigation Reel Hose Machine - IATF 300
- Providing a Pattern to Evalute CRM Systems Based on EFQM Model in SMEs
- Real-Time Gesture Recognition for Controlling a Virtual Hand
- Research of the Neural Network by Back Propagation Algorithm
- Research on the Application of Virtual Reality Technology on Industry Automatic Simulation
- Risk Priority Analysis for Engine Based on Fuzzy Weighted Geometric Mean
- Software Module for Objects Shape Tracing and Recognition before Gripping
- Substructure-Joint Based Approach to Damped FE Model Updating of Complex Assembly Structure
- The Application of the Minimum Cut Sets in Reliability Evaluation of Power Transmission and Transformation System
- The Model of Wax Precipitation and Experimental Validation
- Using the Web by Finnish SME's for Corporate Social Responsibility Activities
- Aspects of Lag's 5-Dof a Biped Robot Stabilization
- Aspects Regarding the Disc Brake's Thermal Stress Simulation by Using Infrared Thermography
- CAD Optimal Design, Documentation and Automated Assembly of Mechanical Product
- CAD-Geometrical Modeling of a Hydro Mechanical Product
- Comparative Analysis of ZMP for Biped Robot and Human Plantar Pressure
- Design and Modeling of a Ball Wheel Mobile Robot
- Design of Digital Controllers for Permanent Magnet Torque Motors
- Design of Humanoid's Lower Limb Model for Walking
- Design of Power Quality Monitoring System
- Designing Arms and Hands for the Humanoid Robot ROMAN
- Distributed Task Allocation in Multi-Robot Systems Using Argumentation-Based Negotiation
- Dynamic Analysis of a Mobile Mechanical System with Deformable Elements
- Effect of Intermediate Location and Time-Varying End Mass on the Dynamic Response of a Flexible Robot Manipulator in Tracing Multi-Straight-Line Path
- GA Based Trajectory Generation for a 7-DOF Biped Robot by Considering Feet Rotation during Double Support Phase
- Hardware-Software Co-Design for BLDC Motor Speed Controller Design
- Mathematical Modeling of Management Decision Activities with Maximum Risk in the Intelligent Robotic Systems
- Measurements Methods of Industrial Robots Accuracy and Workspace Determination
- Mechanical Design and Control Issues of a Dexterous Robotic Hand
- Mechanical Loading of R-R-T Dyade
- On Improving the Performances of Hydraulic Incremental Positioning Units with Mechanical Position Feedback
- Optimum Design of Multi-Links Finger Grippers
- Probabilistic Finite Element Prediction of the Active Lower Limb Model
- Problems of Loading Capacity of Suction Cups in the Radial Direction
- Researches Regarding the Use of Elctrohydraulic Servosystems at Industrial Robots
- Stealth Target Location Algorithm for Low Altitude Based on Microwave Radiometer
- Study upon the Dynamic Answer of Plane Manipulators
- The Design and Implementation of Integrated Backup System for EMS Base on the Cloud Computing Technology
- The Dynamic Behavior of the Elevation Movement Mechanism of One Transfer Manipulator with Electro-Hydraulic Acting
- The Use of Sensors in a Working Area of a Mobile Robot
- Towards the Development of Internet of Things Oriented Robot to Object Interaction Framework
- Design and Implementation of Embedded Wireless Smart Gateway Based on PXA270
- Efficient Heat Dissipation Design of High-Power Multi-Chip Cob Package Led Modules
- Methods to Improve Properties of Gate Dielectrics in Metal-Oxide-Semiconductor
- Photoacoustic Imaging Based on Limited-Aperture of Transducer
- Simulation and Experimental Study of FRD Snubber Circuits in Buck Converter
- Study on the Technology of MPLS in Wide Area Protection System
- Effect of 7050 Aluminium Alloy Microstructure on Residual Stress by Laser Shock Processing
- Inkjet Printing of UV Curable Character Ink and Control of the Dried Droplets Size
- Investigation of the Scanning Angle and the Orientation of the Absorber Effects on the Photoacoustic Tomography Imaging
- MMA-Grafted PE Separators of Lithium-Ion Battery Prepared by UV-Radiated Grafting
- Multiband Techniques of LED and UV Materials on Visualization of Needle Marks
- Structural Variation of Transition Metal - Fullerene Thin Films Modified by Thermal Annealing and Ion or Laser Beam Bombardment
- The Analysis of Wave Form for 3-D Wave Tank
- The Computer Calibration Modeling of Radial Distortion Based Weld System with Parallel Planes
- Brazing of Aluminum Tubes Using Induction Heating
- Macroporous Silicon Fabricated by HF Electrochemical Etching for Antireflective Application in Solar Cells
- Preparation of Pure Anatase TiO2 Thin Films by DC Sputtering Technique: Study on the Effect of Oxygen Partial Pressure
- A Pilot Study of Readers of Freely Charged Newspaper
- Weighting of Goods by Means of DC Motor
- A Density Functional Theory Study on the Ultra Long Single Walled Armchair (3, 3) (Bn)Xcy Nanotubes
- Application of Adaptive RBF-SMC for Electro-Hydraulic Position Servo System
- Effects of Adding Multiwalled Carbon Nanotube into Dielectric when EDMing Titanium Alloy
- Enhancement of TiO2 Thin Film UV Detectors by Study of Electromagnetic Effects of Silver Nanoparticle
- Gearbox with Worm Face Gear Coated with Nanostructured Multilayer
- Investigation of Plasmon Resonances of Ag Nanoshells for Sensing Applications
- Mechanisms of 1D Crystal Growth in Chemical Vapor Deposition: ZnO Nanowires
- Microwave Sintering of Barium Ferrite Nanoparticles Processed via Sol-Gel Method
- Preparation of Nanosized Molecularly Imprinted Polymer Spheres for Atrazine
- Reducing Microbially-Influenced Corrosion on Aluminum by Using Organosiloxane Sol Film with Silver Nanocrystals
- Study of Polarization and Relaxation on Pb(Zr,Ti)O3 Thin Films by Scanning Probe Microscopy
- Studying of B, N, S, Si and P Doped (5, 5) Carbon Nanotubes by the Density Functional Theory
- Synthesis of Anatase-Based Titania Nanostructures Using Extreme Hydrothermal Conditions
- Synthesis of Na0.5Bi0.5TiO3 Microcubes via a Cr3+-Assisted Hydrothermal Route
- Hydrothermal Synthesis of CeO2 Nanocrystals Using Oleate-Modified Precipitation Method
- Application of the Measurement and Control Network on Rewinder
- Automatised Line Used for the Assembly/Test Subsystem-Carcass
- Experimental Setup for Harmonic Drive Efficiency Determination
- Nondestructive Evaluation of Material Damage Using Nonlinear Rayleigh Waves Approach
- Stability Analysis of an Aeroelastic System with Actuator Saturation
- Study on the Safety Assessment of the Mobile Scaffolding System Metal Structure Based on the Onsite Inspection
- Temperature Determination of St-Al Joints during Friction Welding
- Wrist Mounted Camera for Colour and Shape Recognition
- A New Approach to Popov Criterion for Stability Analysis of Nonlinear Control Systems
- Antropomorphe Robot with 4 Degrees of Freedom for Didactic Use
- Application and Research on the Model of Saturated-Unsaturated Porous Material Coupling Hydro-Thermal-Mechanical Process
- Applications of the Flexible Wing Concept at Small Unmanned Aerial Vehicles
- Bending-Torsional Flutter of a Composite Rectangular Cantilever Wing Subjected to Engine Thrust
- Classification of Power Quality Problems by Wavelet Fuzzy Expert System
- Contribution to Stability Control of Nonlinear Systems
- Design Consideration of Bio-Inspired Contractible Water-Jet Propulsor for Mini Autonomous Underwater Robot
- Designing the Tracking System for a String of Photovoltaic Modules
- Electronic Interface for Pneumatic Grippers Using USB Port
- Failure Process and Mechanism Analysis for the Connecting Rod of Diesel Engine
- Finite Element Analysis and Design Exploration of a Bolted Joint
- Fluctuation-Suppression Pitch Control Strategy Study for Wind Turbine
- Fuzzy Thrust Staging Kinematics for the NERVA Strap-On Boosters
- Global Fast Terminal Sliding Mode Control for Wind Energy Conversion System
- Hydraulic Positioning Unit with Internal Mechanical Position Feedback
- Identification of Tight Spots to an Automatic Mechanical Assembly Line, by Simulation WINQSB
- Implementation of RFID-Based Access Control Management System
- Indoor Navigation and Guidance of an Autonomous Robot Vehicle by Using Wireless (ZigBee) Cummunication
- Logic Design of Improved Backup Power Automatic Switching Considering the Influence of Small Hydropower Stations
- Manufacturing Using Robot
- New Inverter Fault Current Limiting Method by Considering Microgrid Control Strategy
- Off-Line Programming of Industrial Robots Using Co-Located Environments
- Performances Evaluation for a Reversed Quasi-Carnot Cycle (Refrigeration Machine) by Using the Direct Method from Finite Speed Thermodynamics
- PID Parameters Tuning Based on Wavelet Neural Network for Automatic Voltage Regulator Control System
- Research on Engineering Machinery Manufacturing PDM and CAD Integration Solutions
- Research on the Vacuum Attachment System of a Cleaning Robot with Vertical Displacement
- Researches on a New Type of Rotating Thermic Motor
- Robot - Turner
- Spatial Information System for Management and Control of Electrical Substations
- Technical Options for Off-Grid Electricity Supply
- The Design and Implementation of Intelligent Community Monitoring System
- The Dynamic and Lightweight Design of the Support Structure of Electric Vehicle's Power System
- The View to the Current State of Robotics
- Torque Control and Pitch Control Strategy in VSCF Wind Turbine above Rated Wind Speed
- Using the Microcontroller and the PLC in a RPP Robot Control
- Vibration Diagnosis of Electric Motor's Bearings
- Voltage Stability Enhancement Considering Operation of Smart Loads