Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), July 29-31, 2011, Sanya, China /
Saved in:
Meeting name: | International Conference on Advanced Engineering Materials and Technology (2011 : Sanya, China) |
---|---|
Imprint: | Stafa-Zurich, Switzerland ; Enfield, NH : Trans Tech Publications, ©2011. |
Description: | 1 online resource (4 volumes) : illustrations |
Language: | English |
Series: | Advanced materials research ; v. 287-290 Advanced materials research ; v. 287-290. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11160081 |
Table of Contents:
- Analysis on Anti-Crack Mechanism of High Elastic Asphalt Stress Absorption Interlayer
- Absorbing Properties of Composite Material Plates of Multi-Layer Absorbing Structure
- Effect of a Filler Surface Treatment on the Properties of Conductive Silicone Rubber Filled with Ag-Coated Cu Flakes for EMI Shielding
- A Study on Shape Memory Performance of Cu-Al-Ni-Be Alloy Single Crystal
- Boride Coatings Structure and Properties, Produced by Atmospheric Electron-Beam Cladding
- Cytotoxicity of Single-Walled Carbon Nanotubes with Human Ocular Cells
- Electrochemical Inspection of the Interaction of Double Strand ds-DNA with Carmine on Nanometer TiO2 Doped Carbon Paste Electrode
- Effect of Temperature on Microstructure and Mechanical Properties of Spray Forming Al-8.5Fe-1.3V-1.7Si Alloys
- Effect of Resin on the Property of the Fluorescent Inkjet Ink
- A Study on the Physical Properties of AZO Films as Variation of Sputtering Conditions
- Grafting of 4-Vinyl Pyridine onto Polyesters Initiated by Potassium Diperiodatocuprate(III)
- Mixed Potential Type Sensor Using Stabilized Zirconia and La0.75Sr0.25Cr0.5Mn0.5O3 Sensing Electrode for NO2 Detection
- Bioactivity of TiO2/Ti Composite Membrane with Different Crystral Phase
- The Optimization of Combustion Chamber Components with Constrained Axisymmetric Sensitivity Analysis Algorithm
- Nucleation Features of the Magnetite Fe3O4 Nanoparticles with the Size of 30-40 Nm for the Hyperthermia Applications
- Vibration Properties of Multi-Layered Graphene Sheets
- Study on Production Performance Simulating the Low Permeability Dual Media Gas Reservoirs Pre and Post Fracturing
- An Approach to Raw Material Cost Control Model in Iron and Steel Industry
- Preparation of CMC-Stabilized FeS Nanoparticles and their Enhanced Performance for Cr(VI) Removal
- PVDF-HFP/PVC Blend Based Lithium Ion Conducting Polymer Electrolytes
- The Application of FEA in High-Speed Cutting
- Structure and Fatigue Crack Resistance of Multilayer Materials Produced by Explosive Welding
- Effects of IGF-I on the Proliferation of Testis Sertoli Cells in Mouse
- The Study on the Apoptosis of Rat's Granule Cells Induced by Ethanol
- Study on Reaction Process of Synthesis of Indole from Aniline and Ethylene Glycol
- Correcting Prediction Model of Printing's Dot Area by the Spectral Reflectance
- Manufacturing Technique of Temporary Dental Filling Composite
- Preparation and Characterization of Gelatin/Oligomeric Proanthocyanidins Composite Microspheres
- Effect of Foaming Agent AC on the Properties of A12O3-SiC-C Trough Castables
- Preparation and Characterization of Low-Methoxyl Pectin/Bletilla Striata Composite Membranes
- Liquid-Phase Synthesis of NiO-Loaded Ag Nanoparticles and Enhanced Photo-Degradation Performance
- Manufacturing of Functional Gelatin/Chitosan Composite Membrane
- Manufacturing Technique and Physical Properties of Environment-Protective Composite Nonwoven Fabrics
- Technical Application Process for Eco-Friendly Cotton by Antimicrobial
- Research for Use Diamond Knife to Ultra-Precision Boring Gauging Pump's Boring
- Synthesis and Characterization of Flower-Like Hematite Nanostructures
- Analysis of a Magnetorheological Transmission for Fan Clutch
- Study of Crack Resistance Property of Polyvinyl Alcohol Fiber Reinforced Concrete
- Influence of Z Value and Sintering Temperature on Properties of #946;-Sialon Bonded Corundum Composite
- Effect of CeO2 Deposition Temperature on the Properties of Tl-2212 Superconducting Films Grown on MgO Substrates
- Effect of Quenched Speed on Microwave Properties of the NdFeB Nanocomposites
- Carbon Fiber Powder Reinforced Epoxy Composites used for Rapid Tooling
- Thermal Expansion Anisotropy of Cordierite Crystal
- Electronic Binding Energy Changes of Elements in Al2O3-MgAlON Composite during the Crack Healing Process
- Simulation and Technological Parameters Optimization of Axial Feeding Bulging Process for T-Tube
- Combustion Synthesis of Long Afterglow luminescent Materials Sr2-xCaxMgSi2O7:Eu2+,Dy3+
- Electromagnetic Effects and Layer Thickness Influence on Natural Characteristics of Multiferroics Composite Structure
- Research for Repairing the Main Reducer Gears of Helicopter Based on Shot-Peening and Electro-Brush Plating Composite Technics
- The Crystalline Phases of Mold Fluxes Containing TiO2
- The Application of the Sequential Valve Gate Control in Injection Molding
- Process Optimization and Application of Supported Nano-Photocatalytic Materials
- Simulation Research on the Four-Nozzle Flapper Valve Based on GMA
- Studies on Lauroyl Chloride Modified Tourmaline Powder
- New Water-Based Anti-Corrosion Chemical Materials in Engineering Repairing
- Research of Rough Structure of Superhydrophobic Film
- Temperature Effect on Phase Formation of Nanocrystalline Bismuth Titanate Synthesized via Hot Injection Method
- Development of Single Sheet Tester System for Magnetic Materials Under Tensile Stress
- Formation of Nano-Textured Silicon Surface Layer (or Nanowires) by Silver Ion-Assisted Etching
- The Synthesis of Novel Organic Light-Emitting Material 2,7-Dibromo-2#8242;,3#8242;,6#8242;,7#8242;-Tetra(2-Methylbutyloxy)spirobifluorene
- Preparation of High Purity Low Hydroxyl Synthetic Fused Silica Glass
- Preparation of Zirconia-Aluminum Titanate Nano-Composite Powder
- Polymer Electrolyte of PVDF-HFP/PEMA-NH4CF3So3-TiO2 and its Application in Proton Batteries
- Study on the Control of Selenium Emission During Coal Gasification
- Influence of the Surfactant on the CdTe Nanomaterials Morphology
- Evaluation of Comprehensive Accuracy to the Opto-Electrical Stabilization/Tracking Device
- Preparation and Properties of Biocomposite Film with Gelatin and Poly(Vinyl Alcohol)
- Modulation of Band Gaps of Codoping GaN: A First Principles Study
- First-Principles Study of the Electron Transport Behavior of Short Graphene Nanoribbon
- Study on the Calcination of Titanium Silicalite Zeolite (TS-1)
- Effect of Pulse Electric Discharging on the Directional Solidification Structure of Pure Aluminum
- Prediction of Orthotropic Mechanical Behaviors of Hot-Pressing Weft-Knitted Flax/PP Composites
- Dynamic Recrystallization Behavior and Softening Kinetics in 3Mn-1.5Al TRIP Steels
- The Effect on Adsorption Performance of Molecularly Imprinted Polymer Using the Different Functional Monomers
- Preparation of Ag Nanoparticles by Particulate Radiation of Pulsed Electron Beam
- Microstructure and Tensile Properties of a Mg-5Sn-4Al Alloy
- Aqueous Synthesis of Highly Luminescent CdTe/CdS/ZnS Core-Shell-Shell Quantum Dots with Biocompatibility
- Mathematical Model of Dynamic Recrystallization of U75V, RE-#8545;Heavy Rails
- Investigation of the Curing Residual Stress in Gr/Epoxy Laminated Composites by Using Embedded Fiber Bragg Grating Sensor
- Infrared Light Absorption and Emissivity of Silicon Microstructured by Femtosecond Laser in SF6
- A Novel Carbon Quantum Dots-Ionic Liquid Hybrid with Strong Photoluminescence
- Study on the Preparation of Fe2Mo3O12 and its Negative Thermal Expansion Property
- Electromagnetic Bandgap Structure by Low Temperature Co-Fired Ceramics Technology
- Preparation and Performance of Infrared Radiation Ceramic Using Blast Furnace Dust
- Preparation of RPSL-01 Type Photosensitive Resin for Stereolithography and Study on its some Properties
- Adsorption of Dye from Aqueous Solution by Zn-Al Calcined Layered Double Hydroxide
- Research on Morphology Control of PVA/Na-MMT Composite During Preparation
- Shock-Cushioning and Energy Absorption Performance Research of Aluminum Foam-Polyurethane Composite
- Design of an Eco-Power Automobile Body Made from Green Composite and its Structural Optimization in FEA
- Experimental Study of Restraining Frost Formation on Hydrophilic Surface under Natural Convection Conditions
- Influence of Nd2O3 on Structure and Dielectric Property of Zirconia Barium Titanate
- Microstructure and Performance of Nanocrystalline Nickel Parts
- Characterization of (ENR-50)-Ionic Liquid Based Electrolyte System
- Hydraulic System Simulation of Heavy Horizontal Directional Drilling Head
- Melting,Crystallization and Thermal Degradation of Fly Ash/Lldpe Blends
- Research on the Contraction Joint Width of Rubberized Concrete Pavement
- The Effect of Ultrasonic Field on Synthesis of Nanometer Calcium Carbonate and its Growth Mechanism
- Synthesis of SiC Nanowires with Silica Sol and Carbon Black
- Mechanical Behavior of UHPC(Ultra High Performance Concrete) According to Hybrid Use of Steel Fibers
- Mechanical Properties of Electron Beam Cured MMT/MWNTs/Epoxy Composites
- Ethylenediamine-Functionalized Carbon Nanotubes and Nylon-6 Composites
- Synthesis of MgAl2O4 Spinel-Corundum Composite with Waste Refractory
- Study of Carbon Fiber/Polycarbonate (CF/PC) Material Sandwich Structure for Vehicle Hood
- Research on Traffic Organization Evaluation Method Based on Simulation
- The Effects of Bi2O3 Doping on the Electrical Characteristics of SnO2 Based Varistors
- Preparation and Up-Conversion Luminescence of Yb3+ and Er3+ Co-Doped BaF2 Phosphor
- The Influence of Water Content on the Morphology and Magnetic Properties of Nickel Nanoparticles Prepared in Reverse Microemulsion
- Effect of Several Factors on Properties and Synthesis of Superabsorbent
- Dielectric Relaxation in (Ba0.7Ca 0.3)TiO3-Ba(Zr0.2Ti 0.8)O3 Ceramics
- Solving the Splitting Resilient Modulus of the Asphalt Mixture
- Microstructure and High Temperature Oxidation Resistance of TiC/Ti-25Al Composites
- Morphological and Adsorptive Characteristics of Hydrogen Sulphide on Zinc Oxide Nanoparticles Modified SBA-15
- Study on Preparation of Nano-Silicon Dioxide and the Influencing Factors of Particle Size Growth
- Synthesis of BaCO3 Nanostructures with Different Morphologies in Water/Room-Temperature Ionic Liquids Mixed Solvents
- Stabilization Effect of Sodium Phosphate on Hemihydrate Calcium Sulfate Whiskers
- X-Ray Photoelectron Spectroscopy Study on Reduction of Graphene Oxide with Hydrazine Hydrate
- Static Design Based on Hierarchy Optimization Associating Materials and Structures
- Preparation of Composite Ground Calcium Carbonate in Ca(OH)2-H2O-CO2 System and Characterization
- Hydrogen Storage Property of Ti45Zr35Ni17Cu3 Quasicrystal Powder
- Optimization of Typical Grinding Model and the Simulation of Grinding Process Numerical
- Electro-Generation of Furfural Alcohol in Ni-P-MCMC/mCS Bipolar Membrane Equipped Electrolysis Cell
- Hydrothermal Synthesis and Characterization of Ca-Mg-Al Hydrotacite-Like Compounds
- Experimental Investigation on Durability of A Combined Rotor Bearing Support with Metal Rubber Material under Dynamic Loadings
- Conductive Ink and Applications in Printing Antenna of RFID Tag
- The Study of TiO2 Whiskers Prepared by Melt Phase-Splitting Method and their Photocatalytic Properties
- Preparation and Performance of Radiation Grafted Poly(methyl methacrylate)-Graft-Polyimide Pervaporation Membranes for Thiophene/Hydrocarbon Separation
- Fe3O4/ Rectorite Composite: Preparation, Characterization and Absorption Properties from Contaminant Contained in Aqueous Solution
- Study on Erosion-Abrasion Properties of Al-Mn Alloy and its Composite Reinforced with Al2O3 Particulates
- Experimental Research on the Magnetic Field Sensitive Polymeric Actuator
- X-Ray Characterization and Crystal Structure of SBT Doped with V2O5
- Research on Properties of Ca3-x La xCo4O9 Thermoelectric Material with Adding La
- Study on the Methods Evaluating the Stability of a New Type of Energetic Material
- Generalized Regression Neural Network Cargo Flow Forecast Model in Logistics Park Based on Radial Basis Function
- Influence of the PH Value of Comb-Shaped Polymer on the Adsorption between the Polymer and Ca2+ Ions
- Applied Research on Contractive Rate Inspecting Testing Mould of Pressure Casting Alloy
- Progress in Research on Mo-MoSi2 Functionally Gradient Material
- Effect of Cd on Microstructure and Damping Capacities of Mg-Zr PM Alloy
- Study on Mechanism of One-Dimensional Phononic Crystals with Locally Resonant Structures
- Effect of the Different Structure of the Chiral Core on Phase Behaviors of Cholesteric Star-Shaped Liquid Crystals
- Thermal Expansion Behavior and Characteristic of SiCp/Al Composites
- Experiment on Thermal Conduction of Compacted Bentonite Blocks
- New Oil-Absorbing Material
- SHS and Properties of Perovskite La0.7Sr0.3MnO3 Powders by Using Dual Oxidants
- The Research on the Tribological Properties of C/C Composites
- Developing an Iron-Carbon Nitride Complex as Photocatalyst with Response to Visible Light
- Synthesis of Magnesium Borate (Mg2B2O5) Whisker by Flux Method
- Synthesis of Bis(2, 4-Dihydro-2H-3-(4-N-Maleimido) Phenyl -1, 3-Benzoxazine)Isopropane
- Preparation of Energy Storage Ceramsite Manufactured from East Lake Sludge
- Study on Finite Element Nonlinearity Calculation of Folding Rudder
- Experimental Study on Seismic Performance of HRB400 Reinforced Concrete Columns under Cyclic Loading
- Preparation, Characterization and Catalytic Properties of the Different Types of Nanometer Crystal Manganese Dioxide
- The Process and Property Characteristic of Electromagnetic Shielding Functional Warp Knitted Composite Fabrics
- Finite Element Analysis on Stability for Elastic-Jumping Membrane
- Control of Electronic Properties of Organic Semiconductor
- Effects of Micro Fines Content on Performances of Mortar Prepared with Mill Tailings from Magnetite
- Preferential Sorption of Minerals on Calcium Hydroxide of Hydration Productions of Cement
- Corrosion Behavior of Reinforcing Steel Bar HPB235 in NaCl Solution
- Comparing Tests on Water Relating Stability of Polyester and Polyacrylonitrile Fiber Reinforced Asphalt Mixture
- Test and Analysis of Expansive Deformation for Shrinkage-Compensating Steel Fiber Reinforced Shotcrete
- The Effect of Anhydrite on the Hydration of CFBC Ash-Clinker-Water System
- Inhibition of the Expansion of CFBC Ash
- Experimental Research on Road Performance of Natural Asphalt Modified Asphalt Mixtures
- High Temperature Creep Behavior of Zn-1.0Cu-0.2Ti Alloy
- Numerical Simulation on Laboratory Triaxial Test of Composite Soil with Roots
- The Design and Case Study of Pervious Concrete Materials
- Dehydration Process of Calcium Silicate Hydrate during Heating in the Air
- Thermal Resistance and Heat Dissipation of LED PCB with Thermal Vias
- Compressive Strength of High Volume Slag Cement Concrete in High Temperature Curing
- The Effect of CFG-Pile Caps and Cushion to Stability of Embankment
- Effects of AgSbO3 on the Piezoelectric/Dielectric Properties and Phase Transition of Li2O Doped NKN Lead-Free Piezoelectric Ceramics
- Comparision of Direct Quenching and Reheat Quenching Process on Microstructure and Mechanical Properties of a High Strength Steel
- Experimental Investigations on Flexural Behavior of Sandwich Composite Panels
- The Ac Impedance Characteristics of Soil with Different Water Content
- Preparation and Properties of Alkaline-Earth Silicon Oxynitride Glasses
- Experimental Study on the Re-Bonded Magnesia - Zirconia Refractory for New Dry Process Cement Kiln
- Numerical Simulation of Gas Distribution in COREX Shaft Furnace
- Study on Wear-Resistance of Laser Surface Remelted-Strengthening High NiCr Indefinite Chilled Iron Roll Material
- Fracture Failure Analysis of the 60Si2Mn Spring Steel Liner
- Water Model Study on Circulation Rate Influenced by Snorkel, Nozzle and Blowing Parameters in RH Refining
- Experimental Study of Fly Ash Concrete Attacked by Sulphuric Acid
- Effect of Microstructural Evolution on Mechanical Properties of 55NiCrMoV7 Steel
- Study on Mechanical Properties and Microstructure of High Boron Alloy
- Rutting Treatment Technology of Asphalt Pavement of Abrupt Slope Section in Heavy Load and High Temperature Zone
- A Review of Strength Models in Association with Pore Structure of Cement-Based Materials
- Study on Microstructure and Properties of CuZn37Mn3Al2FeSi Alloy
- Structure and Magnetic Properties of Sm-Fe-N Prepared by Nitriding High Purity Sm2Fe17 Grown from Sm-Rich Melt
- Study on the Influence of Oxygen Content on Fatigue Life of Bearing Steel Using Statistics of Extreme Values
- Influence of Heat Treatment on Low-Cycle Fatigue Behavior of AZ61 Magnesium Alloy
- Research on Fireproofing and Insulation System of Polyurethane Foam and Moulding Board with Glazed-Hollow-Bead Mortar
- Inhibition Mechanism of the Substance Containing Aluminum on ASR
- Variation of Carbonation Coefficient of Pumping Concrete with Moist-Curing Time at early Ages and Fly-Ash Content
- Pilot-Scale Reconstruction of Steel Slag with Electric Arc Furnace Slag and Coal Cinder
- Removal of Sulfur Dioxide from Sintering Flue Gas with Coking Wastewater
- Effect of the Combined Using of Fly Ash and Granulated Blast Furnace Slag on Properties of Cementless Alkali-Activated Mortar
- Research on Slaked Magnesium Slag as a Mineral Admixture for Concrete
- Application of Interlocking Block Pavement in Rural Highway
- High Performance Prestressed Polymer Mortar System in the Application of Concrete Structure Reinforcement
- Effect of Admixtures Treated by Magnetic Field on Concrete
- Study on the Preparation and Properties of CaZr0.9in0.1O3-#945; and BaCe0.85Y0.15O3-#945; Solid Electrolytes
- Experimental Study on the Mix Design and Fundamental Properties for Mixd Mortars Using Recycled Fine Aggregates
- The Development of High-Alumina Heat Resisting Alloy Used for Scaleboard
- Quantification of SBS Content in SBS Polymer Modified Asphalt by FTIR
- Microstructure and Property of 700MPa Ti Microalloyed High Strength Steel Produced by EAF-CSP
- The Influence of Aggressive Environment with a High Content of Fluoride Ions on the Alloy TiAl6V4 with a Protective Ti-Al-Si Layer
- Numerical Simulation of the Flow of Gases in a Large-Scale Electroslag Furnace
- The Influence of the Pressure on the Solidification of Zinc Alloy
- Study on Road Performance of Phase-Change Temperature-Adjusting Asphalt Mixture
- Basic Properties of Masonry Cement Mortar Affected by Content of Stone Powder
- Basic Properties of Masonry Polypropylene Fiber Cement Mortar
- Study on Flexural Strength and Flexural Modulus of Elasticity of Cement Stabilized Aggregate
- Mixture Proportion Design of Reactive Powder Concrete by Means of Liquid Limit
- Wear Characteristics of Al 6061 Reinforced with Graphite under Different Loads and Speeds
- Effect of Active Alumina on Sintering Behavior of Andalusite Powder
- Corrosion Mechanism on Oilwell Cement in Formation Water with High Content of CO2&H2S
- Study on Strength and Durability of Concrete Containing Recycled Coarse Aggregate Manufactured with Various Method
- Experimental Study on Impermeability and Frost Resistance of High Strength Concrete Used in Shaft of Coal Mine
- The Development and Experimental Study on High Strength and Toughness Drill Pipe Steel
- Research on Pavement Performance of Dense Skeleton Lime Fly-Ash Stabilized Aggregate in Gravelly Conditions
- Experimental Research and Finite Element Analysis of Concrete-Filled Steel Box Columns with Longitudinal Stiffeners
- The Research on Dense Packing Concrete Mix Proportion
- The Effect of Heat-Treatment on the Microstructure and Properties of PC Steel Bars
- Oxidation Behavior of Fe-Y Coatings Deposited by Magnetron Sputtering
- Microstructure and Properties and Wear Resistant of Carbide Free Bainitic Casting Steel
- Research On Method of Discovering Second Phase Particles with Scanning Electron Microscope
- Fire Performance and Thermal Insulation of Reinforced Lightweight Aggregate Concrete
- Study of Ageing of Copper Foils in the Outdoor Environment
- Effect of Heat Treatment on Microstructure and Properties of P91 Steel
- Industrial Production and Application in LCCs of Bauxite-Based Homogenized Grogs
- Test and Application on New Synchronous Grouting Materials for Earth Pressure Balance Shield
- Behavior of Concrete Permeability Considering ITZ
- Influence of Co-Polymer Dispersion Additives onto Shrinkage Strains for Cementitous Mortars and Concretes
- Study on Influence Factors of Co-Crystallized P2O5 in Phosphogypsum Formation and its Mechanism
- The Effect of Nb2O5 Addition on the Dielectric Properties of BaTiO3-Based Ceramics
- Optimization and Analysis for Coke Consumption Based on Clustering
- Investigation of Sulphate Attack on C-S-H Gel
- Research on the Failure Feature of AAC Load Bearig Block Wall Based on the Quasi-Static Test
- The Microstructure Research on Interfacial Transition Zone of Filling Material Containing FA and Coal Gangue
- Numerical Analysis on the Load-Carrying Capacity for the FRP Reinforced Four-Point Bending Concrete Beam
- Research on Hydration Mechanism of 50% Portland Cement-50% Fly Ash Systems with TA and NMR Techniques
- The Effect of Pretreatment and Homogenization on the Precipitation of Spherical Al3Zr Phase in Aluminium Alloy Containing Trace of Zr
- Mechanism of Melt Treatment Improving Thermal Stability and Glass Forming Ability of the Al-Ni-Y Amorphous Alloy
- Study on Toughening Cement-Based Composites with CaCO3 Whisker and Fiber
- Research on the Application of Recycled PE in High Modulus Asphalt Mixture
- Study on the Properties of Pumping Gangue Filler
- Development and Conceptual Design of Steel Deck Pavement Used Cement/Emulsified-Asphalt/Epoxy Resin Concrete
- Study on Grinding Dynamics of Phosphorous Slag Prepared by Vibration Mill
- Influence of Fiber Type on Concrete Flexural Toughness
- Evaluating Plain Concrete Flexural Toughness Using PCER Method
- Study on the Difference of Amorphous Substances of Coal Ashes
- Morphology and Structure of Aluminum Substituted C-S-H Synthesized by Reaction of Alkali Silicate and Calcium Nitrate Aqueous Solution
- Feasibility of Basalt Fiber Reinforced Inorganic Adhesive for Concrete Strengtening
- Proposal of a Simplified Prediction Formula for Compressive Strength of Fly Ash Concrete
- The Research Status and Prospect of the Fiber Reinforced Concrete
- 3D Finite Element Analysis on a 270m Rockfill Dam Based on Duncan-Chang E-B Model
- Energy Calculation Model of Concrete Based on Life Cycle Assessment
- Experimental study on the Crack Initial Stress and the Crack Damage Stress of Red Sandstone Under Different Strain Rate Conditions
- Analysis of Heat Conduction of Anisotropic Building Materials
- Strength Test and Forecast of CFRP-Confined Concrete Preloaded under Uniaxial Compressive Force
- Experimental Study on Alkali-Activated Slag-Lithium Slag-Fly Ash Environmental Concrete
- The Effect of Super-Absorbent Polymer as a Self-Curing Admixture on the Performance of Mortars
- Microstructure and Strength Characteristics Analysis of Shrinkage-Compensating Shotcrete
- Investigation of Aging Kinetics of SBS Modified Asphalt Based on Rheological Properties
- Influence of p/i Interface Treatment on the Flexible Thin Film Solar Cells for Application in Building Integrated Photovoltaics
- Applying Research on Microwave Promoting Curdle Technique of High Performance Concrete
- Experimental Study on CBR Swelling Characteristics of Remolded Expansive Soil
- Shear Strength Parameters Determination of Compacted Loess with Compression-Tension Tests
- Experimental Study on Compound Binding Material of Alkali Activated Metakaolin and Ground Granulated Blast Furnace Slag
- Novel Low-Temperature Electrolyte for Li-Ion Battery
- The Electrochemical Characterization of Electrochemically Synthesized MnO2-Based Mixed Oxides for Supercapacitor Applications
- Study on Synthesis and Electrochemical Property of LiMnPO4 by Microwave Method
- Improving the Rate Capability of Unburned Carbon from Oil-Fired Fly Ash as an Anode Material in High-Power Lithium Ion Batteries
- Influence of Sintering Atmosphere on the Physical and Electrochemical of LiFePO4/C
- Research on the Electrical Electrochemical Properties of the LiFe0.98Mn0.02(PO4)1-0.02/3Cl0.02/C Cathode Materials
- Influence of Carbon Sources on the Electrochemical Performance of LiFePO4/C Composite Cathode Material
- Solvothermal Synthesis of Pyrite (FeS2)
- Properties and Synthesis of Kaolin / Potassium Polyacrylate / Acrylamide Composite Superabsorbent Resin
- Preparation and Biocompatibility of Nano-Hydroxyapatite/#946;-Sheet Silk Protein Composite
- Synthesis and Properties of Chemically Cross-Linked Poly(Vinyl Alcohol)/quaterized Hydroxyethylcellulose Ethoxylate (PVA/QHECE) as Novel Alkaline Anion-Exchange Membrane
- Theoretical Study on Crystal Structure and Hydrogen Storage Properties of Sodium Hydride
- Study on Solid Phase Crystallization of Silicon Films Deposited on Different Substrates
- Effect of the Thickness of Cr Interlayer on the High-Frequency Characteristics of FeCoTa/Cr/FeCoTa Multilayers
- Hydrothermal Synthesis of GdVO4:Eu 3+ Phosphors by Optimizing its Preparation Conditions
- Characterization of Aminoalky Cellulose Adsorbent
- PtRu-SiO2-TiO2/C Anode Electrocatalyst for Direct Methanol Fuel Cell
- The Effect of Rare Earth Modification on the Structure and Catalytic Performance of SO42-/ZrO2 Solid Acid Catalysts
- Synthesis of Monodiperse Carbon-Coated Lithium Iron Phosphate
- An Analysis of how Water-Based Ink Affects the Low Energy Surface Wettability
- High Transparency and Thermal Stability of Alicyclic Polyimide with Crosslinking Structure by Triallylamine
- Modification of Recycled Melamine-Formaldehyde Plastic on Polypropylene
- Wettability and Water Absorption of Irradiation Cross-Linked UHMWPE
- Structure and Properties of Doped ZnO Nanopowders Synthesized by Methanol Alcoholysis Method
- Electrochemical Construction of (0001)-ZnO/(111)-Cu2O Heterojunction Diode with Excellent Rectification Feature
- Carbon Nanotubes on the Performance of Al3+ Doped #945;-Nickel Hydroxide
- Highly Porous Carbon Derived from Sunflower Seed Shell for Electrochemical Capacitor
- Several Measures to Improve the Mechanical Properties of Hand-Pushing Tapping Knife
- Synthesis of Cathode Materials Fe-Doped NiS2 by Mechanical Alloying for Li/NiS2 Cells
- Facile Fabrication and Characterization of Carbon Fiber Microelectrode
- Effects of Titania and Silica Nanoparticle on Paint Film
- Spin Precession from Hyperfine Interaction on Magnetoresistance in Nonmagnetic Organic Semiconductors
- Characterization of Heat Storage by Nanocomposite-Enhanced Phase Change Materials
- Effect of Growth Temperature on the Indium Incorporation in InGaN Epitaxial Films
- A New Method for Preparation and Luminescence of YBO3 :Eu3+ Phosphor
- Manufacture of Biodiesel by Transerification Reaction with Alkali Process from Waste Cooking Oil
- Effects of Ash Contents of Activated Carbon on the Performance of Electric Double Layer Capacitors
- Synthesis and Characterization of the Positive Electrode Material LiFePO4/C under Different Microwave Heating Time
- A Study on the Modification of Water Lubrication Bearing Materials
- Structural Stability Analyses of Composite Laminate Wind Turbine
- Structure and Magnetic Properties of MnAl/#945;-Fe Nano-Composite Powders Prepared by High-Energy Ball Milling
- Transesterification of Cotton-Seed Oil by Heterogeneous Solid Super Base KF/MgO Catalyst
- Self-Powered Device Using Aligned Carbon Nanotube Arrays in Multi-Physics Fields
- Synthesis and Characterization of 5-Fluorouracil and Polyethylene Glycol Esters as Prodrugs
- Kinetic Study of Nitrite Removal from Municipal Wastewater Using Ion Exchange Resins
- Characterization of the Aging Behavior of Microorganism Coagulated Natural Rubber
- Impact of Impurities in Metallurgical Grade Silicon on Removal Efficiency of Vacuum Evaporation
- Theoretical Investigation on the Structure and Optical Properties of Alq3 and its Difluorinated Derivatives
- Synthesis and Properties of Waterborne Polyurethane-Acrylate Hybrid Emulsion Modified by Organic Silicane
- Synthesis, Characterization and Properties of Polyesteramides Based on #949;-Caprolactone and 6-Aminocaproic Acid
- Crystal Structure of Aromatic Polysulfones Containing Biphenylene Units
- Evaluation of Li-Mg-B Alloy Anode for Intermediate Temperature Lithium Batteries
- Study of Dislocation Generation and Growth Orientations in Upgraded Metallurgical Grade Multicrystalline Silicon
- Research on Lithium Ion Battery Material LiCoO2 for Hybrid Supercapacitor
- The Interaction between a Screw Dipole in Matrix and an Elliptical Inhomogeneity Containing a Confocal Crack
- Synergistic Strengthening and Toughening of PS/LDPE Blends with Nano-CaCO3
- Photocatalytic Degradation of Gaseous Acetone by a Self-Prepared Nano-Sized Composite TiO2/In2O3/SnO2 Film Photocatalyst
- Dehydration of Fructose to 5-Hydroxymethylfurfural Catalyzed by Alkaline Ionic Liquid
- Synthesis of Sn4+ Doped TiO2 Nano Powder and its Photocatalytic Activity
- Studies on Alkali Lignin Degradation by Phomolybdic Acid Using Ultrasonic Method
- Nano-Materials Coupled with Non-Thermal Plasma Application in Environmental Protection
- Study on A New Inorganic Binder for Fabricating Casting Mold and Core
- Preparation of CNTs/TiO2/CS Film and its Photocatalytic Activity
- Photochemical Degradation of Azo Dyes in the Presence of Hydrogen Peroxide and Hematite under Visible Light Irradiation: Surface Complex Forming and Reaction Mechanism
- Fixed-Bed Column Study for the Removal of Ag(I)and Cr(III) from Aqueous Solutions Using Puffed Rice Husk
- Solvent Extraction and Separation of Palladium(II) from Hydrochloric Acid Medium with N-Benzothiazolylazo Butyl Imide
- Direct Synthesis of DMC from CO2 and CH3OH over CexZr 1-x-0.1Y 0.1 O2 Catalysts
- Preparation and Photocatalytic Activity of Pb2+- SiO2-TiO2 Composite Catalyst
- Preparation of BiXY(2-X)O3 and its Photocatalytic Degradation of Molasses Fermentation Wastewater under Visible-Light Irradiation
- Research on Correlation of Total Bacterial and other water quality index in Water Distribution Network
- Adsorption Behavior and Thermodynamic Characteristics of p,p'- DDT on Expanded Graphite
- Preparation and Characterization of Rare Earth Solid Superacids SO42-/TiO2-SnO2-Dy2O3
- Determination of the Presence of Composite Ions in Catalysts and Composite Ionic Liquids-Catalyzed Isobutane Alkylation
- Preparation, Characterization, and Oxidative Dehydrogenation of C3H8 with CO2 of V-Cr/SBA-15/Al2O3/FeCrAl Metal Monolithic Catalysts
- Characterization and Application in Pretreatment of Landfill Leachate on Modified Bentonites
- Influence of Resin on the Performance of Water-Based Plastic Gravure Ink
- The Effect of Barium Modification on the Sulfur Tolerance of Methane Catalytic Combustion over PdO/Al2O3 Catalysts
- Application of Pd/C Catalyst to Degradation and Utilization of Nitrobenzene in Water
- Synthesis of Bis-Indolylmethanes Containing 1,2,3-Triazolyl Catalyzed by Brønsted Acidic Ionic Liquid under Solvent-Free Conditions
- Preparation of Dialdehyde Konjac Glucomamman
- Preparation of Au and Au-Ce Catalysts Supported on Acid-Activated Bentontie and its Catalytic Performance
- Study of Benzene Hydrogenation on Ni/Bentonite Catalyst
- Investigation of Biocomposites Containing Glycerol-Plasticized Soy Protein and Kaolin
- Influence of Oxide Doping on Co3O4-CeO2 for CO Oxidation
- Study Defoaming Properties of Water-Based Varnish
- Synthesized WO3/ZrO2 Nanocomposite as the Catalyst for Preparation of Peracetic Acid
- Preparation of Nano-TiO2 Using a Sol-Gel Process Mediated in Reverse Microemulsion Combined with a Solvent Thermal Technique
- The Preparation of C, N, S Tri-Doped TiO2 and Visible-Light Photo-Degradation of Methylene Blue and Dyes
- Controlling Morphologies and Visible Light Photocatalytic Activity of Microstructured BiVO4 in a Microwave Hydrothermal Process
- Catalytic Transfer Hydrogenolysis of 2-Phenyl-2-Propanol with Pd/C and Formic Acid
- Vapor-Phase Elemental Mercury Adsorption by Novel Modified Vermiculite Adsorbents Impregnated with Different Agents
- A Novel Catalyst for the Preparation of Biodegradable Polycarbonate from Carbon Dioxide
- Research on the Technical Conditions on Synthesizing Calcium Zirconate Material
- Discussion the Influence of Nonmetal Doped TiO2
- Hydrothermal Treatment and its Influence on the Structure of Phosphorous Doped Titania
- The Study of Photogradation of Dichlorvos Pesticide Residues in Vegetables
- Electrochemical Reduction of Nitrate by Fe-Si Alloy Electrode
- The Performance of Low-Heat Accumulation Asphalt Mixture and the Evaluation Model of its Thermal Effect on Cities
- Preparation of Poly(Butylene succinate)(PBS) Foaming Materials
- Solar Photocatalytic Degradation of MCRR by Ag-Doped TiO2 Films
- Photocatalytic Degradation of Bisphenol A in Wastewater Using Nanometer TiO2 Film
- Study on Adsorption Treatment of Phosphate Wastewater by Briquette Ash
- Photocatalytic Degradation of Methylene Blue Solution Using Nanometer TiO2 Film
- Preparation of Konjac Glucomannan/Tannin/Rice Flour Crosslinked Films
- Effect of Coagulation Bath Concentration on the Structure and Properties of Polyacrylonitrile as-Spun Fibers during Wet-Spinning
- Effect of Oxide Buffer Layers on the Optical and Electrical Properties of Ga-Doped Zinc Oxide Thin Film
- Synthesis and Characterization of New Kinds Sulfoxide Extractants for Palladium(II)
- Study on the Influence of PH Value on the Plastic Water-Based Gravure Ink
- Synthesis of Mn and Se-Doping TiO2 Mesoporous Materials and their Antibacterial Efficacy under Visible Light Irradiation
- Study on the Characterization of Fe- Ti Modified Bentonite and Its Influence on Absorption Performance of Wastewater
- Study on Unsupported Nano-MoS2 Catalyst for Clean Fuel
- Effects of BaO on Properties of Low Fluoride Content Mould Flux for High Speed Continuous Casting
- Study on Tungsten Carbide Leaching of Cemented Carbide Tool in Sodium Carbonate Solution
- Effects of Different Structural Systems on Lateral Rigidity of Steel Structural Frames
- Experimental Study on Seismic Performance of Tall Building Structure of Concrete Filled Steel Tube (CFST) with Transfer Story
- Reflected Amplitude of Elastic Wave at Free Surface
- The Seismic Damage Characteristic and Mechanism Analysis of Building Structure in Wenchuan Earthquake
- In-Plane Force Effect of Reinforced Concrete Beam with Elastic Supports
- An Evaluation on the Width-Thickness Ratio of the Rotation Capacity of HSB800 Steel Flexural Members
- Pushover Testing of Circular Adobe Structure
- Numerical Analysis for Earth Structure Sitting on Liquefiable Soils in Roller Boundary
- Coincident Work between Upper Steel Structure and Lower Concrete Structure of Ningxia Flower Art Center
- Study on Medical Polyvinyl Alcohol (PVA) / Polyvinyl Pyrrolidone (PVP) Hydrogel Wound Dressing
- The Application of Radiation Technology in the Field of Medical Biomaterials
- Effect of Sintering Aid on Microstructure and Mechanical Properties of TiB2/TiN Tool Materials
- Influence on Surface Characteristics of Microalgae Cell by Solution Chemistry
- Study on Laccase Immobilization with PVA Materials
- Preparation, Characterization and Antibacterial Activity of Chitosan Schiffbases
- The Influence of Different Carbon Sources to #947;-PGA's Molecular Weight Distribution
- Controlled Release of Aspirin from SiO2-PEG Hybrid Coating on 316Lss Substrate for the Preparation of Drug Eluting Stents
- Enhanced the Insulin Secretion of HIT-T15 Cells by Hyaluronic Acid-Coating Involves Cytosolic Free [Ca2+]i Response
- Investigations on Poly(Ethylene glycol) Modified P2O5-CaO-SiO2 Gel Bioglass
- Preparation and Properties of Fluoride-Coated Mg-Zn-Zr Alloy for Biodegradable Intravascular Stents
- Study on the Application of Marine Biodiesel on High Speed Diesel Engines
- Mechanical Properties and Rheological Behavior of Injection Moulded Foaming Bamboo Powder-Polypropylene Composites
- Preparation and Application of Picroside II Molecularly Imprinted Ploymer for TCM Researching
- Investigation on the Novel Technology of the Fine Inclusion Removal due to the Dispersed In Situ Phase Induced by the Composite Ball Explosive Reaction
- Preparation and Bioactivity of Mesoporous Bioactive Glasses with Different Phosphorus Contents
- Extraction of Polysaccharides from Cordyceps militaris by Ethanol Refluxing Method
- In Vitro Degradation and Biocompatibility of WE43, ZK60, and AZ91 Biodegradable Magnesium Alloys
- Fabrication of Sandwich-Like Hydroxyapatite-Al2O3-Si(100) Biocomposite
- The Use of 15N to Measure N2-Fixing Effectiveness of Rhizobium leguminosarum Strains
- Anti-Inflammatory Property of Biomaterial Carotenoids Production by Rhodobacter Sphaeroides WL-APD911
- Study on Polyvinly-Alcohol(PVA)/ Iron Oxide Black(Fe3O4) and Polyvinly-Alcohol(PVA)/ Iron Oxide Red(Fe2O3) Magnetic Sensitive Hydrogel
- Synthesis of a Neotype Molecule Absorption Resin and Study on its Separation of Pigment from Fermentation Liquid
- Effect of Polyethylene Jacket on Swelling Behavior and Mechanical Properties of PVA Hydrogel Nucleus Pulposus Prosthesis
- Synthesis and Characterization of Rodlike Ammonium Tetrathiomolybdate and its Thermal Decomposition Mechanism
- High Performance Poly (Vinyl Alcohol)-Zeolite LTA Composite Membranes for Ethanol Dehydration Pervaporation
- Synthesis and Spectroscopic Properties of 2-(7-Fluoro-1H-Imidazo[4,5-B]phenazin-2-Yl)-Phenol Derivatives
- Foundations and Advances of Cohesive Mixing
- Optimization Research on Synthesis Conditions of Adsorption Materials for Lithium Extraction from Seawater and Brine
- Study on Adsorption of Cr(VI) in Wastewater by Powdered Activated Carbon
- Research on Application of High Degree of Substitution Cationic Starch in Paper Coating
- Research on Preparation of Cationic Polyacrylate Emulsion Paper Strengthening Agent
- Study on Preparation of Calcium Sulfate Whisker with Leaching Tailings of Nickel Ore
- MEG and its Application in Drilling Fluid
- Synthesis of Mesoporous Zr-P-Al Materials with High BET Specific Surface Area without Calcination
- Interlayer Structure and Ion-Exchange Properties of Hydrotalcite Intercalated with CO32-, CrO42-, SO42- and NO3-
- Synthesis and Characterization of Biodegradable Segmented Liquid Crystalline Poly(Ester-Urethane)s
- Lanthanum Modified Catalyst for Efficient Supply of Hydrogen through Dehydrogenation of Organic Chemical Hydrides
- Waterborne Cationic Fluorinated Polyurethane Modified by Perfluorinated Alkyl Long Chain
- The Effect of Annealing on the Electrical and Optical Properties of Cu-In-O Thin Films
- Effect of Substrate Temperature on Properties of CuInSe2 Thin Films Deposited by Magnetron Sputtering
- Investigation of Microstructure and Tribological Properties of CrxTi1-XN Composite Films on Piston Rings
- Growth of ZnS Films and Application in Heterojunction
- SSI Damping System Research Based on Discontinuity of the Motion
- Effect of Target Power and Bias on Adhesive Force of BCN Films
- Fundamental Research on the Mechanism of High-Speed Welding Undercut
- Study on Ultrafiltration Membrane Technology for Water Purification in Zhengzhou
- Influence of Anisotropy Behavior in UOE Process for X80 Micro Alloy Steel
- Spectroscopic Ellipsometry Study on HfO2 Thin Films Deposited at Different RF Powers
- Study on Crystallization Characteristic of 3PE Anti-Corrosion Coating for Steel Pipeline
- The Research on YAG Laser Welding Porosity of Al-Li Alloy
- Fatigue Properties of AF1410 Steel Welded Joint by Electron Beam Welding
- Identification of Dynamical Contact Parameters for Spindle-Tool Holder Interface Based on the Receptance Coupling Substructure Approach
- Porosity Formation Mechanisms and Controlling Technique for Laser Penetration Welding
- Study in Motion Control for Adsorption Type Wall-Climbing Robot with Several Legs
- Study on the Influence Factors of ZnFe2O4 and TiO2 Composite Films Photoelectrocatalytic Properties
- Effects of Negative Bias Voltage on Structure and Mechanical Properties of DLC Films Synthesized by FCVA Deposition
- Shape Finding Analysis of Membrane Structures Based on Real Material Property
- Preparation of AlN/Diamond Film Structure for High Frequency SAW Devices
- Study of Nanocrystalline ZnO and Zn2TiO4 Film Electrode with ZnPc Dye and PbS Quantum Dots Composite Sensitization
- High-Frequency Microwave Heating Technology for Automobile Windshield
- In Vitro Bioactivity Test of FA Added with TiO2 of Different Phases Coated on Ti-6Al-4V Substrates by Nd-YAG Laser Cladding Process
- Research on the Characteristics of Si-Based Reflector under the Action of Strong Laser
- Isothermal Physical Aging of Poly(ethyl methacrylate)/Polyhedral Oligomeric Silsequioxanes Nanocomposite Thin Films
- Structural and Electrical Properties of PVC-NH4CF3SO3-EC Proton Conducting Electrolyte System
- The Influence of Sputtering Argon Pressure on LaB6 Films Characetristics
- Laser-Induced Thermoelectric Voltage in La0.5Pr0.5MnO3 Thin Film
- Mechanical Optimization with Unknown Mathematical Model Based on Improved Adaptive Genetic Algorithm
- Numerical Studies on the Dynamic Performance of Polymer Foams
- Effect of Sputtering Parameters on the Property of TaNx/Ag/TaNx Low-Emissivity Film
- Study on Behavior of Ni-Based and Fe-Based Hardfacing Alloys in Plant Valves with Laser Cladding
- Electrodeposition of Blue Gold Thin Film onto Indium Tin Oxide Coated Glass
- The Manufacturing Method of Diamond Dressing Gears for the Dressing of Honing Rings
- Study on the Effects of Process Parameters on Weld Joint using Coaxial Inside-Beam Wire Feeding
- Investigation of High Emissivity Coatings Prepared by Plasma Spraying
- Performance Analysis on CRA-Clad Pipes Extruded from Bimetallic Centrifugal Castings
- The Preparation and Electromagnetic Properties of Nickel-Zinc Ferrite Thin Films
- Effects of Sputtering Power on the Microstructure of Mg2Si Films by Magnetron Sputtering
- The Diffusion and Interfacial Reaction of Cu/Si(100) Systems
- Influence of Substrate Temperature on the Structural, Electrical and Optical Properties of Al-Doped ZnO Films by RF Magnetron Sputtering
- Surface Modification Mechanism of Parylene C Film by Solution of Sodium-Naphthalene Complex
- Preparation and Research of Ferroelectric Properties of Fabricated Thin Film by Doping La and Nd to Bi4Ti3O12
- The Dielectric and Tunable Properties of Graded Fe Doped PST Thin Films Fabricated by Sol-Gel Method
- Improvement of Atomic-Layer-Deposited Al2O3/GaAs Interface Quality through a Novel Sulfuration Method
- The Electrochemical Characteristics of Corrosion Scale on P110 Carbon Steel
- Simulation of Contact Behavior of the Thin Film of Hard Disk at Head/Disk Interface
- Hydrogen Sensing Properties of WO3/Pd Composite Films
- ZnO Films Deposited on Various Diamond Film Substrates with Different Surface Roughness
- Nanocrystallization of Fe-Based Amorphous Alloys Fe73.5Cu1Nb3Si13.5B9 by Continuous CO2 Laser Overlapping Irradiation
- Synthesis and Characterization of Reduced Graphene Oxide Film as Electronic Material
- Experimental and Numerical Study of Double Containment Joint Having Circular Cross-Section Support
- Study on Vibration Assisted Heat Transfer for Isonlated Fins
- Thermal Stability of Cu/Si (111) Films Prepared by Ionized Cluster Beam Technique
- The Effect of Negative Substrate Bias on the Strain Prosperities of ZnO Films Deposited by PFCVAD
- Ferroelectric, Dielectric and Pyroelectric Properties of Highly C-Axis -Oriented Nanostructured (Pb,Sr)(Zr,Ti)O3 Thin Films
- Application of Whey Soy Proteins Waste Water in Beverages
- Effect of Hydrogen on Microstructure of TA15 Electron Beam Welded Joint
- A Comparative Study of Structural and Optical Properties of ZnO Thin Film Prepared on Sapphire Substrate by PLD and Annealed
- Characteristics of the Keyhole and Energy Absorption during YAG Laser Welding of Al-Li Alloy
- CdS Sensitized ZnO Core-Shell Nanorod Array Films Preparing by Chemical Bath Deposition
- Calculating the Phase Equilibria of Al Rich Al-Cu-Mg Alloys
- Cracking Analysis of the Upset Head of PC Steel Bars
- Effect of Defocus Distance on Layer Quality in Insider-Laser Coaxial Powder Feeding Laser Cladding
- Annealing Temperature Effect on the Microstructure and Adhesion of SiC Films Produced by MF Magnetron Sputtering
- Characterization of Ti-Al-N Films Deposited by Cathodic Vacuum Arc with Different N2 Partial Pressure
- Annealing Effects on Microstructure and Thermoelectric Properties of Bi2(Te0.95Se0.05)3 Thin Films Prepared by Flash Evaporation Method
- Analysis of Refrigerants Properties and Alternative
- A Stable Thin Film from Soluble Single-Walled Carbon Nanotubes on ITO
- Dielectric Tunability of Mn Doped Pb0.3Sr0.7TiO3 Multilayered Thin Films Prepared by Sol-Gel Method
- Determination of Thermal Parameters via a Homotopy Algorithm
- Auto-Control of Defocus Distance during Filling Laser Welding of Ti-Alloy with Wire
- Dielectric Properties of Pb0.97La0.02Zr0.95Ti0.05O3 Antiferroelectric Thin Films Prepared at Different Annealing Temperatures
- Comparative Studies on the Corrosion Protection Effect of Different Ions Selective Polyaniline Coatings
- Deposition of PANI/SSA Nano Films by MAPLE Technique and the XPS Research
- Simulation on Performance Curves of PEM Fuel Cell
- Research on Weak Leak Detection of Boiler Tubes under Strong Background Noise
- Fabrication and Characterization of Solid Oxide Fuel Cell Anode with Impregnated Catalytic Ni-CeO2 Nano-Particles on 8YSZ Fibers
- Electrospinning Processing and Microstructural Characterization of Ce0.78Gd0.2Sr0.02O2-#948; Fiber for a Composite Anode
- Preparation and Characterization of NiO/YSZ Cathode and BSCF/SDC Anode of SOEC for Hydrogen Production
- Simulation Researches of PEMFC Based on ANSYS / FLUENT
- Electrochemical Performance and Microstructural Characterization of Solid Oxide Electrolysis Cells
- Studies of Half-Cell for Anode Supported SOFC after Reduction
- Synthesis and Properties of Sulfonated Polyimide/Polybenzimidazole Cross-Linked Membranes for Fuel Cell Applications
- Effects of Cold-Rolled Deformation on the Electrochemical Performance of Al Anode Materials
- Microstructure and Electrochemical Properties of La0.75Mg0.25Ni3.5(TiNi3)0.1 Hydrogen Storage Alloys
- Effect of Channel Depth of PEM Fuel Cell on its Peformance
- A New Hydrocarbon-Type Polymer Electrolyte Membrane for DMFC Application
- Performance of Electrically Conductive Fabrics Based on Polyester/Metal Wire Wrapped Yarns
- Study on Influence of Crimping Performance of PET/PTT Self-Crimp Yarn Treated with Moist Heat
- The Effect of Blending Ratio and Yarn Twist Multiplier on Polysulfone /Meta-Aramid Blended Yarn Properties
- Effect of Nano-TiO2 Antibacterial Treatment on Mechanical Properties of Cotton Fabric
- Study on the Properties and Application of Optim(tm) Fine Fibers
- Study on Acid Hydrolysis of Cationic Starch
- Study on the Compressive Properties of Spacer Fabric Composites Based on Finite Element Software ANSYS
- Study of the Cooling Wall Boundary Layer with Underfloor Supply Room
- Research on Finishing of Oxidized Cotton Fabric with Sericin
- The Optimised Technological Parameters for Electrospun PMIA Nano-Scale Fibers
- Preparation of SiO2/PPS Fiber and Study of its Heat-Resistant Properties
- Preliminary Studies on Washing Durability of Fire-Retardant Viscose Fiber
- The Principle of the New Fiber-Delivering Device for Friction Spinning
- Effect of Far-Infrared Pre-Heat Treatment and Adding Methylenediphenylisocyanate(MDI) on Adhesion Bonding between Reinforcement and Rubber of Conveyer Belt
- Far-Infrared Emission of Filled Fabric by Sweat
- Adhesion between PET/Nylon Fabrics and Rubber by RFL with the Solution of Different Proportion
- The Approach of Electrode Materials on Electroluminescent Fabric
- The Study of Two-Step Dip System of Conveyer by Different Pre-Treatment
- Composited Silver-Contained PA 6 Electrospun Fibers with Spunbond Nonwovens for Filtration Applications
- The Feasibility Study of PET Fabric Dyed with Disperse Dye by Adding ZnO Powder
- Uniformity of Nanofiber Alignment by Electrospinning
- Research on Dissolve Oxygen Modeling Based on Neural Network
- Tearing Behavior of the Polyurethane-Coated Fabrics with Five Different Silicone Contents
- Effect of Acid Modification on the Properties of Potato Starch Pastes and Starch Film
- Research on Design Principle and Method of Trademarks with Embossment Effect Realized by Adopting the Method of High Weft Density
- Process Technology and Mechanical Properties of Polylactic Acid Ply Yarns and 316L Stainless Steel Braids
- Processing Technique and Sound Absorption Property of Three-Dimensional Recycled Polypropylene Nonwoven Composites
- The Evaluation of Physical Property and Manufacturing Process of Functional Warp Knitted Fabrics with Variation of Weft
- Manufacturing Technology of 316L Stainless Steel/Poly(Lactic acid) Composite Braids and the Induction of Hydroxyapatite Formation on the Braid
- Manufacturing Technique and Mechanical Properties of Environment-Protective Composite Nonwoven Fabrics
- Processing Technique of Fiber-Based Composite Sound Absorbent/Thermal-Insulating Board
- Hidrophilic Modification of Electrospun Polysulfone Fiber Mat
- Fast Evaluation of Pectin Content in Ramie Using NIR Techniques
- Anti-Bacterial and Crease-Resist Finishing of Cotton Fabrics with Chrysalis Chitosan
- Study on Extracting of Sappanwood Natural Dye by Cellulase
- Manufacturing Technology and Characteristics of Nerve Conduits Made of Poly(Lactic acid) Braids
- Study on Preparation and Properties of Cotton Fabric Modified by Anthraquinone Extract from Aloe
- Multi-Target Gray Situation Decision-Making for Clean Performance of Effective Cleaning Cloth for LCD Display Panel
- A Novel Method for Preparing Electroconductive Cotton Fabric
- The Study of Far Infrared Emissivity Influence by Rate Visible Spectrum
- Preparation and Characterization of Polyester Fibers/Absorbent Cotton Composite Dressing Matrix Fabrics
- Effect of Far-Infrared Pre-Heat Treatment and Adding Methylenediphenylisocyanate(MDI) on Adhesion Bonding between Reinforcement and Rubber of Conveyer Belt
- Processing Technique of Sound Absorbent/Thermal-Insulating/Flame Retardant Composite Material
- Water Model Experiments on Surface Flow Velocity of Molten Steel in Slab Caster Mold
- Numerical Study of Effective Elastic Properties of HGB Periodically-Reinforced Composite
- Effect of Electromagnetic Field on the Solidification Structure of C70250 Copper Alloy
- Study on the Processing Technology and Mechanical Properties of Nonwoven Fabric Composited by Recycled PP Selvedges
- Research on Welding Deformation Simulation
- The Application of Shape Memory Polymer Composite in Space Deployable Truss Structure
- The Establishment of the System to Measure Displacement Based on Two Stage Rotary Coder
- Analysis on Dynamic Performance of FlatValve in Water Hydraulic Piston Pump
- Investigation on New Submersed Entry Nozzle in Slab Caster
- Structure Design for Resonant Diaphragm Liquid Density Sensor
- Health Monitoring of RC Frame Structure to Shake Table Excitations
- Velocities of Starch Particles in ER Fluids Measured with Laser Speckle
- Study of Microwave Reflection Behaviour in Fe3O4 Magnetorheological Fluids
- Detecting Centroid Projection for a Quadruped Robot with Hand-Fused Foot Based on ARM
- Effect of HPC on the Thermo-Sensitive and Hydrophilicity of PAN Films
- Application of Wavelet Analysis in the DPIV Information Processing for the River Model Test
- Turbine Blade Aerodynamic Optimization Based on Variable Dimensionality Model
- Research on Digital Modeling about Free-Form Surface with Holes Based on Coordinate Measuring Machine
- The Modeling and Performance Analysis of Automatic Drilling & Riveting System Based on Modular Design
- The Design and Characteristic Analysis of New MR Fluid Damper
- Simulation of Adsorption Equilibrium of Heavy Metal Cations on Soils in Circumneutral Aqueous Solution: Influences of Solution PH and Dissolved Humus Substances
- Hoop Stress Analysis of High Grade Heavy Wall Thickness Pipe in Hydrostatic Test
- Analysis of LEACH Protocol Based on Ant Algorithm
- Based on Risk Source Pipe Leakage Emergency Device and Sealing Method Research
- Study on Grout Permeation Model of an Equipment for Grouting in Roller Compacted Concrete
- Design of Rope Tension Measuring System of Fishing Gears
- Analysis of Flow Field for Stirring Tank with Complicated Cavities Based on FLUENT
- The Modeling Design and Research of Multi-Function Electric Fan
- The Assessment of Communication Problem and Effect for Product Form
- Experiments on Dicing Monocrystalline Silicon Wafer Using Micro Abrasive Water Jet
- Design of Multi-Functional Infant Handcart
- Development of Intelligent Drilling and Intelligent Drill Tools
- Effect Analysis of Different Wall Materials on Construction Project Cost
- Finite-Element Analysis of the Arm Lock of Ejection Seat Interlock Device
- A New Portable Toilet Design and Optimization
- A Linear Mapping Hysteresis Model Based on Theory of Microscopic Polarization
- Stiffness Analysis of Structures Using Shape Memory Polymer Composites
- Numerical Simulation and Optimization in Solidification of Zinc Alloy
- Summary on On-Line Balancing Techniques and Devices of Spindle
- Study on the Sensing Property of Carbon-Coated Filaments
- Effect of Magnetic Fields on the Resistance and Microstructure of Al-Cu Alloy during Solidification Processing
- Adsorption Behavior and Corrosion Inhibition of EPP for Q235 Steel in H2SO4 Solution
- Analysis of the Formation Mechanism of Hollow and Cricoid Stria in Formed Coke
- Study on the Methods Evaluating the Burning Temperature of Gunpowder
- Chemical Reaction Mechanism of Sintering Flue Gas Desulphurization with Pyrolusite Slurry
- Investigation on the Interaction between Human-Like Collagen and Iron
- Analyses and Determination of Current Density and Energy Density in Electric Melting Glass Furnace
- Enriching Indium Using Neutralization from Solution Bearing Indium
- Study on Behavior of Impurity Antimony in Zinc Electrowinning
- Investigation of Ultraviolet Transmission Characteristics of Detecting Window in Ultraviolet Corona Inspector
- Comparison on Extraction Yield and Quality of Coix Seed Oil
- Study on Wet Picking/Wet Repellence at the Grain Direction of Offset Paper
- MOSFET Performance Manufactured on Silicon Wafer Using CESL Strain Technology with Temperature Effect
- Study on Effect of Spring Materials on the Comfort of Bed
- Multi-Function Electrical Energy Meter Detection Method Analysis
- Application of Metal Powder Metallurgy Technology in Prepartion of Friction Materials of the Railway Vehicles
- The Detection of Cypermethrin on the Surface of Apple by IR Micro-Imaging
- Microstructure and Wear Properties of TiC-Al Composite Fabricated by Field Activated and Low-Pressure Assisted Combustion Synthesis
- Study on Application of Extrusion Concrete Side Wall in Concrete Face Rock Fill Dam
- Modeling for the Print-Through Prejudging Based on the Optical Density Difference
- Recycling and Using of Vibration Energy
- Na2WO4-Mn/mullite Catalysts for Oxidative Coupling of Methane
- Experiment Layout of Space Laser Communication System Based on Adaptive Optical System
- Washing Deinking of Mixed Office Wastepaper As a New Resource for Electrical Purposed Paper
- Flotation Deinking of Xerographic and Laser-Printed Paper: Influence of Surface-Active Substances
- Environmental Impact Assessment on Lifecycle of Sofa Material
- Research to Health Diagnose Model of Gate and Hoist Machinery Based on AHP
- The Factors of Pseudo Threshold Pressure Gradient
- Discussion on the Detection and Prevention of SQL Injection
- Improve the Charge Balance of White Phosphorescent Organic Light Emitting Diodes Using Co-Doped Electron Transport Layer in Emitting Layer
- Optimal Design on Clearance of Piston Friction Pair for Water Hydraulic Pump
- The Application of Siemens PLC in Traditional Chinese Medicine Production
- Modeling of Structural Degradation of AlCu4Mg1 for Extruded Stringer Type Specimens Exposed to EXCO Solution Environment
- Research on Trivalent Chromium Removal from Wastewater by Gas Quenching Steel Slag
- Depression Performance of Azo Dyes to Sulfide Minerals
- Novel CO2 Capturer Derived from SBA-15 Monolith Coated with Amine
- Research on Internal Stress in Electroplated Cu Films and Ni Films on Ag Substrates
- Research on the Effects of the Basic Properties of Offset Paper and Art Paper on Printing Dot Reproduction
- Promoted and Un-Promoted Co/SiO2 Fischer-Tropsch Catalysts
- The Metallographic Structure and Mechanical Properties of the Brazing Weld of 3003 Aluminum Alloy
- Position and Anti-Swing Control Based on BVP Arithmetic for Bridge Cranes
- Numerical Simulation of Coupled Heat and Moisture Transfer in Porous Building Material
- Taguchi Method for 304 Stainless Steel Nd-YAG Laser Beam Welding
- Multi-Dimensional Grey Construction Deformation Prediction Model Research
- Study on a Self-Diverting Acid System for Well Stimulation Based on Novel Visco-Elastic Surfactant
- Laboratory Study on Low Temperature Rapid Strength Cement Slurry
- 3D Dynamic Analysis of a 270m Concrete Faced Rockfill Dam